I have a brand new installation of 13 PS elements. How I have difficulty drag and drop doesn't work is not on my system Windows 7 Pro 64-bit?

Similar Questions

• New installation on windows 7 pro 64-bit sees not connected wired Officejet 6500 E710a-f

  Hello!

  New installation of Windows 7 Pro 64 bit on a gigahertz 3.40 AMD Phenom II X 4 965 with 8 GB of ram. Printer drivers worked on the same bench while he was running as Windows 7 Pro 32-bit.
  After only install FF, AVG, and Acrobat (almost a clean install), downloaded the software HP Officejet full feature and pilot 2012-10-22, Version: 116,98, 28.8 M - OJ6500_E710n - z_1315.exe and tried to install the Officejet 6500 E710a f.

  The printer has a manually set static IP and can be ping from the host. Clean Windows Firewall is disabled and stopped.

  The web interface using the IP address of the printer comes with all the features works on FF.
  Network status shows connected with IP address, hostname and Mac.

  However, when installing the network audit is no ethernet connection. Even manually enter his public static IP address or hostname does not solve the problem.

  Try the USB, the same question option. I see in Device Manager under other devices HPOfficejet 6500 and 6500 HPOfficejet - Fax with a blue questionmark.
  (In the same "other devices" there are 2 Officejet 6500 with a yellow exclamation point - probably from failed network installation).

  In the printers and devices window, the 6500 is displayed with the correct thumbnail, but with a yellow exclamation point icon. Law and by selecting the convenience store, Windows comes up with the message that no driver is installed and offers a solution.  The correction ends with the error that no drivers not found for the FAX. Re-apply the patch never finds the driver.

  Anyone who has met something similar (and a solution)?

  Thanks for any help!

  Jack

  After trying to do an install clean-install of 100% and once again, the driver software could not find the printer name or IP address.
  Back at each stage, I noticed that I was not using the correct driver! For some reason I D/L the pilot E710n which is for HP Officejet 6500 a Plus e-All-in-One.
  Whatever the difference, when installing the E710n for the model does not detect the printer, or via USB or Ethernet.
  After you download the right driver for the E710a - f HP Officejet 6500 a e-All-in-One Printer (OJ6500_E710a - f_1315.exe) installation perfectly finished in a few minutes and everything goes well...

  You would think, base or USB connectivity network should not be dependent on the specific differences sub-model. I was expecting that a bad driver interrogate the device after finding its IP address and display an error message with useful text.

• Need to download & install a new copy of Windows 7 Pro 64 bit for strongly modified pc OEM

  Original of the hard drive has crashed, please download & install a new copy of Windows 7 Pro 64 bit on new SSD. I updated day/has replaced most of the OEM parts to 4 + years except for the motherboard, power supply, & tour. I don't have the old parts, sort of recovery disk installs not successfully because of all the improvements. Have drivers for devices newer than all existing parts on a USB ready when necessary. OEM is telling me to go up the PC with its original components to make it work, and I really don't need all the unnecessary software OEM includes in their recovery disk. Microsoft Download site does not allow me to download from a pc OEM product key. How to solve this? I'm always in the respect of the Windows license agreement, so I don't have to pay for it.  Please advise, thank you

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

• I am trying to copy a file to another folder, I have the file open, how do the other folder along the side so I can drag and drop

  I have a file on a cd - rw that I try to copy to a different folder, I open the file, but how can I get the new folder the long side so I can drag and drop

  Hi tommckeith,

  ·         What version of the operating system is installed on the computer?

  ·         You try to move the file on the CD to the computer or inside the CD?

  If you want to move the file on the CD for computer, follow the steps in the article.

  Move and copy files using drag and drop

  http://Windows.Microsoft.com/en-us/Windows7/move-and-copy-files-using-drag-and-drop

  Copy and paste a file

  http://Windows.Microsoft.com/en-us/Windows7/copy-and-paste-a-file

  If you try to move the file to the CD, then it is not possible to make changes on the data stored in the CD. You must copy the data to the computer, and then make the necessary changes. You can also make the changes before saving the data to a CD.

• Why don't I do drag and drop photos in real size of more attachments in the new Windows Live Mail?

  I am a real estate photographer, and one of the things I have to do on a regular basis is to send pictures to people. They need these photos as attachments. I downloaded the new Windows Live Mail and I noticed that I can't not simply 'Drag and Drop' photo attachments. Instead, Windows Live mail has resized the picture down and put a boarder around it. I went through the settings and I don't see anywhere I can click to the program, what he had ALWAYS done before, that was simple. Now to send a file, I have to click on the "Attachment" button, navigate my external drives and find the file that I send. I have hundreds of customers and too many files having to negotiate through. I prefer to be able to slide and have it set out in its full dimension, as I always did before in previous versions of WLM and Outlook Express.

  I ALSO can not simply with the right button on a photo, select "send to" and then 'recipient' and attach files there either. Now, it uploads to the Skydrive. My customers don't want it. They do not want additional steps. They just want an email with attached files.

  Please tell me what I'm doing wrong. I can't imagine that you got rid of those simpler features. Please don't tell me you didn't get rid of the simple ability to re size and attach pictures, did you?

  Windows Live Mail questions belong here: http://windowslivehelp.com/product.aspx?productid=15

• installation of windows 7 pro 64-bit will not complete installation. clean install.

  I tried to install windows 7 pro 64-bit and I got all the way to the last part of the installation and the screen goes black for 5 minutes approximately and restarts. then he tries to run windows and the screen becomes black and black rest for at least 30 mins +... is when I gave up on it. What can be wrong? I have overcome all the req and even tried 2 games of motherboard and processor and came to the same problem. I think it's a bad dvd but the store won't Exchange it. They let me just go back. then before I have to send back tomorrow I figured I would give it a try more.

  at this moment I have amd athlon 64 3800 + and 4 GB of ram and I also tried a quad core from amd phenom 2 and 6 GB of ram with the same result.

  Joe can you be more specific, what stage the installation goes on black screen...?

  I had a same problem once and there is a possible resolution to do so,
  If it is in the final phase of installation is mainly due to the video card..,.
  Then restart the computer and keep tapping F8, select "enable Mode low resolution" because the option and now the installation program will continue...
  see if it progresses and ends with the installation by inviting you to enter the user name and password then your product key.
  Once you have finished with these steps and that reach you your office update your video card driver and restart the computer.
  Hope it will work for you :D
  Please let us know if it works :)

• computer laptop Sony vaio S - series VPCS133GN, operating system windows 7 Professional (64 bit) genune, these days, my pen drives are not installation and opening

  I use a computer laptop sony vaio S - series VPCS133GN operating system windows 7 Professional (64 bit) genune, last few days my pen drives are not installation and opening. Kindly help me.

  Best regards

  A.C. Dutta

  Hi Johanna,.

  Thanks for posting your query in Microsoft Community.

  I understand that you can not use the USB in Windows 7.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this

  1. you get any error message?

  2 have you tried using different USB ports?

  3. any other USB key works on the computer in question?

  4. do the USB works on any other computer?

  5 have had any changes made to the computer before the show?

  Please follow the methods.

  Method 1:

  Run the Microsoft fixit for the link.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  As all devices have same also have USB device associated drivers. Appropriate sometimes drivers not detected after initial installation so reinstalling the drivers can fix the problems.

  You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the following steps:

  (a) click Startand then click Control Panel.

  (b) click system and Maintenance, click System, and then click Device Manager.

  (c) Note if the control panel is in Classic view, double-click Systemand then click on Device Manager.

  (d) If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  (e) in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".
  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  (f) repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  We would be more than happy to help you if the steps above did not solve the problem.

• using Laserjet-Canon LBP 1120 printer on new HP ProBook 4350 s under Windows 7 Pro (64 bit).

  Hello everyone, I have a printer Canon Laserjet LBP 1120, I try to use via the new HP ProBook 4350 s under Windows 7 Pro (64 bit).  I tried the recommended troubleshooting options, nothing helps... Any suggestions?  Thanks a bunch

  All drivers/software from the Canon site, if they have win7 64 bit software and install according to Canon intstructions

• LR 5 doesn't work is not on the new Macbook Pro.

  LR 5 doesn't work is not on the new Macbook Pro.  Have tried 2 CC downloads, download licensed 5.6 and 5.5 download licensed, all the results in the same thing.  It comes up with the screen base but no signs and gives that an error occurred when changing the modules.  Nothing I have tried seems to help.  He also said "start with lightroom mobile at the top on the left, although it said it's Lr 5.6.  Anyone else having problems?  Calls to adobe are no help and have to wait until Monday for technical support.  Surely this must run on a NEW laptop with any other installed software!

  Setup logs was very good.  Application installed but is not working properly.  Finally got Adobe support and it turns out be a file permissions error.  Had to add applications and myself as accessors of the Lightroom folder under ~/Library/Adobe/ path and set permissions to read & write (was read only for everything except system) and apply to all the cases closed.   Works fine now.  Including this here in case when someone else is going through this issue.

• I have problems with gmail with firefox. Refreshing page is slow; Drag and drop files in email sometimes do not work.

  My problem is mainly associated with gmail. When I click on return to the Inbox after reading a mail, it takes a good few seconds while in the past, it was always instant.

  My other problem is drag them / move the files as an attachment in gmail. Sometimes it won't work and I have to use the manual icon attaches trombone. However, if I restart firefox and re - connect to gmail, it will work again.

  I also noticed that when you drag an image in the mail window, it will not become an attachment, but it will appear instead. Is there a way where I can choose to have inserted images as attachments rather than displayed in the mail?

  Thanks for any advice you can give me.

  Hi Guigs2,

  Thanks for your advice. I'm not sure what will happen if I change my profile. I'm afraid I'll be somebody else for those who know me.

  So I decided to try the second option on the plugin check. After I clicked on the link the message says that my version of firefox is not the last. I've updated it and so far I don't have drag and drop the problem but we will give it some time and see. This problem does not occur all the time but it happened a few times, so I guess I should try it for a while.

  Thanks a lot for your advice

• I have Firefox 5 and Reminderfox. But Reminderfox does not appear. What is the problem?

  I have Firefox 5 and Reminderfox. But Reminderfox does not appear. What is the problem?

  You probably Fox reminder set to display in your status bar which is no more. RF options have lots of display options, or you can restore your status by an extension bar-

  https://addons.Mozilla.org/en-us/Firefox/addon/status-4-EVAR/?src=API

• I have a big problem in my laptop, this damage, next to the mouse, I have a swelling of the inside of the manufacturing unit. And it doesn't work now! What to do!

  I have a big problem in my laptop, this damage, next to the mouse, I have a swelling of the inside of the manufacturing unit. And it doesn't work now! What to do!

  It's probably a battery issue.   Take it in your local store to apple for review.   It is still under warranty?

  By the way, fill out your profile before asking questions, it is impossible to identify which mobile version otherwise.

• I just got an iPad mini2. I can't send email. I have an iPod and another iPad that work very well.

  I just got an iPad mini2, I can receive but can't send emails. I have an iPod and another iPad that work very well. Help!

  Then, go to your e-mail settings and make sure you have a password set for your outgoing mail server, same password entering your mail server.

• Can I do a clean install of Windows 7 Pro 64 bit on Vista Ultimate 32-bit upgrade. Installation file will not work. The error is described below.

  The XPS 730 with Intel Q9450 computer yourself running Windows 7 64 bit? The details of performance show that it is capable of 64-bit. When I try to install Windows 7 pro 64-bit upgrade, the installer will not work. I get an error that reads:
  The version of this file is not compatible with the version of Windows that you are running.
  
  I'm currently running Vista Ultimate 32 bit. Everything that I read on Microsoft and elsewhere says that you can go from Vista 32 bit to an operating system Windows 7 64-bit as long as you do the clean install. I'm that far away since I can't even run the installation.
  Maybe nobody knows what could be the problem?

  Hi Hal K,

  Thank you for visiting Microsoft Answers.

  If you are currently running a 32-bit version of Windows, you can only perform an upgrade to another 32-bit version of Windows. Similarly, if you run a 64-bit version of Windows, you can perform an upgrade to another 64-bit Windows version.

  If you want to move from a 32-bit version of Windows to a 64-bit version of Windows, and vice versa, you will need to back up your files and then perform a custom of the version of Windows you want to install installation.

  You can see the following link, installation and reinstallation of windows: http://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows

  http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  Swati K - Microsoft support technician
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Drag and drop installation

  These days I met a situation where I can't drag and drop files, e-mails, items in Outlook, etc.  When I click on a desktop icon it is moved to the upper left corner.  I rebooted, tried restoring the system (which is not complete) nothing works.  It seems in fact that drag-and - d├⌐poser works in my window of Google gadgets and I can drag my windows open.  everything just not in them.

  I would like to thank the two of you who responded and commiserate with the other person who has the same problem.  I must say that computers continue to fuel my belief in superstition, so for what it's worth, my problem is solved (at least temporarily).

  I disabled the Norton antivirus and Internet Security protection and tried to do a restore of the system using a date, I was of course occurred before I experienced these problems.  Given my two attempts to restore to yesterday, the restore has failed.  I restarted the computer and had the same problems that previously - strange effects on the desktop when I tried to move the icons and no possibility to drag - move in Outlook.  (I had, out of curiosity, tried drag - move in Excel before, and it worked).  I closed Outlook and was about to access this site again, when, for some reason, thought I would try to move a desktop icon - Alto - it worked.  I have opened Outlook and everything works (I touch wood - to confirm my superstitious beliefs) fine.  Of course, there is no guarantee that things will continue to work and I have no understanding why they are at the moment, but I appreciate the help I received.  It is also good to know that I am not alone with this problem.

  Toni1939