I have a desktop hp pavalion and it does not start

Hello everyone my name is Damuto123456 and I have a hp pavilion Tower, and for some reason, it won't work. When I press the power lights on the tower it itself lights but nothing will load. also this morning, I came to see that it was on the system repair mode because it was able to start. later in the day I had returned to check on the PC and there was a blue screen or as many of you know a BSOD blue screen of death, and he was stuck on this subject if I stop the PC. After that I started it upward and the only thing that would go out of the lights and the fan would run like crazy.  and the worst was that it would not even go through the steps of a computer startup. and my OS is windows 7 so could someone please help me I have very important data on this computer. the model is hp pavilion elite m9715f PC with processor AMD phenom X 4 9650, 8 GB of system memory, HDD 750 GB, blue-ray and recorder player super multi DVD, an ATI Radeon HD 4350, w - lan, built in tv tuner, a 15-1, a hp pocket media drive Bay card reader, an easy backup button hp and a personal media drive hp bay are the elements of the pc

Davide muto

It was 3 months since my computer broke down and I did everything you guys said, but in my conclusion that the motherboard computers died, so I plan on a new computer and plug in the hard drive and I will spare all the good parts that I can use and perhaps add to my new computer so thanks for your help guys. Cordially Damuto123456

Tags: HP Desktops

Similar Questions

  • I have a new windows 7 and it does not start? I went to the computer and then disk but usually do something?

    I bought a set of windows 7 from Tiger direct. It wont start too install? This PC has an adminastraitor and Im not she. The PC too was givin me an old PC

    Hi BruceVJ,

    It's sad to know that you are unable to install Windows 7 on the computer. I'll help you understand a fix for the problem. However, I need to ask you a few questions before proceeding.

    1. you try to upgrade an earlier version of Windows to Windows 7? If so, which version is installed on the computer?

    2. what happens when you try to install Windows 7?

    3. do you get the admin screen to ask password when you install Windows 7?

    Here are some links that should help you to work and solve the problem.

    Install, reinstall, or uninstall Windows


    See also:

    Installation and reinstallation of Windows 7


    Data loss caveat:

    Be sure to back up data that you want to keep before you begin. This is to ensure that there is no loss of data.

    Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

  • I have age of empires 3 and I can not start the program.


    I have age of empires 3 and I can not start the program.
    The program is installed, but once the autorun.exe appears (with the icons of the game, uninstall, website, out) I click on play and the game does not just start. My computing needs are fairly good for the game because I used to play the game on the same computer later.

    Thanks for your help


    Bink is what plays the scenes cut in many games.

    Installation folder of AOE 3 the binkw32.dll should be in games.
    If it is then it is may be damaged and reinstall the game normally would set the

    AutoPatcher.exe - I do not know because I never use auto-patchers with games.
    I have always to download the patch and install manually.
    However, my game has the RockallDLL.dll file.

    I don't really know a good site to lead you to these files.
    You can find a binkw32.dll in another game. Try doing a search of
    Program Files (x 86) (or another location if you install games to the default locations). If you have the file in another game you can copy into your AOE3
    folder of the master installation.

    There was a lot of discussion on these forums about AOE3 so a
    search of these forums may find another suggestion.
    You can also try the specific AOE3 forums-

    Age of Empires Forums - Forums

    Age of Empires III heaven Forum


  • Automatic update failed, and Windows does not start

    I am running Windows 7 and it does not start. Automatic update started as soon as my computer is awakened from his sleep. It closed several programs. The update had completed 30% when he stopped to restart the computer. As windows began, I got a blue screen message telling me that it didn't start. I tried to restore the system at two different times, but both failed. I'm not sure that I can do.

    How do access you the system restore?
    If through the repair of this selection of the computer in the Safe Mode menu - have you tried to use the Safe Mode?  If so, what happened?

    While waiting for a response, please try these free diagnostics, bootable: http://www.carrona.org/initdiag.html

  • My model is an integrated and I was afraid to take it apart and * it upward. I tried all the f keys, but only F2 works. It does not display my HD, and it does not start. What should do?

    Hey guys, so I have an ASUS X502C and last night, it has become very slow, that I tried to close all pages open and it started making a very loud noise. I couldn't even turn off, so I closed the lid and went to sleep. When I woke up it was still on the same screen until I tried to close it and turn it off. He went to a black screen with the back light on. My model is an integrated and I was afraid to take it apart and * it upward. I tried all the f keys, but only F2 works. It does not display my HD, and it does not start. What should do?

    Hey guys, so I have an ASUS X502C and last night, it has become very slow, I tried closing all open pages, and he started to make a very loud noise. I couldn't even turn off, so I closed the lid and went to sleep. When I woke up it was still on the same screen until I tried to close it and turn it off. He went to a black screen with the back light on. My model is an integrated and I was afraid to take it apart and * it upward. I tried all the f keys, but only F2 works. It does not display my HD, and it does not start. What should do?


    Looks like a hardware failure.

    Try to reinstall the operating system:

    It comes to the use of the Asus restore procedure.


    See you soon.

  • I have a Pavilion dv6604nr and it does not start. the lites drive and then more nothing.

    I was using the computer and all of a sudden my screen looked like a candy cane horizontally.  I took the hard drive and not been able to get a bios screen, I'm looking for suggestions or the type of case I can buy to use my hard drive.  I bought a 2.5 from best buy and it does not match.


    You need to get a USB to SATA 2.5 enclosure "HDD.

    Have you thought about the plug of hard disk drive?

    The thing that looks like this?  That is removable. Just shoot.

  • I have re-downloaded 7 elements and it does not accept my serial number

    I have re-downloaded 7 items and it will not accept my serial number so I'm forced to use the free trial of 30 days which expires

    Regular license http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

  • 6 Lightroom will not create a catalog and therefore does not start

    Installed 6 Lightroom on a Windows 8.1 System. Provided with a serial number, but he complained that I need Internet access. Internet worked very well, so I chose to connect later. That is at least 8 times. Now when I try to run, the icon appears on the taskbar but it stalls. When I hover over the icon it shows a thumbnail of the screen to create a new catalog, but it will never develop the screen. The only option I have is to close the small window with a right-click. Then I start again and it's the same - no possibility to start Lightroom even after a reboot, then a re - install! Can not yet return to the fake my serial number validation attempt.

    I decided on a variation of your suggestion. I uninstalled and then download the latest version of Adobe's CC. However, the same problem persists. So, it was now time for some lateral thinking! Since the start-up became not even the creation of Catalog screen, I thought something was wrong there. So I grabbed a laptop, installed Lightroom and then copied the file Pictures\Lightroom on my desktop PC. It worked! Now Lightroom works well. I have to do is enter my serial number and it does not look back

  • Portege M800 - noise and HWSetup does not start


    I use a Portege M800-116 under XP - SP3.

    Problem 1:
    Connection Line-Out to a stereo system and play music with Winamp or WinMediaPlayer works fine on battery.
    As soon as I connect the power adapter, a whistle loud high frequency and UM static disrupts the experience.

    Problem 2:
    Files WAV or MP3 recording with internal or external microphone produce mediocre results.
    The resulting files include a high level of high frequency noise and hum static.
    Connect the power supply increases the problem.

    Comparing the quality of the recording and playback with my old confidence Portege M100:
    My M800 is one not only of poor quality - it's plain unusable.

    Problem 3:
    Toshiba HWSetup does not start from the control panel.
    Have you tried the ONU - and re - installing nothing helps.

    Thank you for guiding me towards a solution.


    Hi, fly,

    I m not Portege M800 owner so I can t he test for you, but I think that if the problem occurs only when the AC adapter is connected, it s a grounding problem

    You have 3-pin or 2-pin AC/DC adapter?
    As far as I know in this case you need 3-pin AC/DC adapter and power cord.

    You should ask an ASP in your country. Guys can order a new AC/DC adapter and check your laptop to what the problem is exactly.

  • XP labors heavily and Will does not start (sometimes even in safe mode.) "And if it starts in the DM, it will freeze when I try to enter to change anything).

    I have a XP computer. During use, the power supply cord unplugged and computer is dead. When I tried to restart it, it will go to the blue screen with an error, go to the screen that asks if I want to start in safe mode. It does not start in normal mode, but it does get my wallpaper and stay there. Sometimes Windows XP screen and stay there. It really starts to make a lot of noise when one of these things happens. Don't know what to do. I have a XP OS disk Dell provided with the computer. Any ideas?

    Repair the Windows XP installation - you should have all your files intact.

    A repair install will replace the system files with the files on the XP CD used to the repair facility. It will leave your applications and settings intact, but Windows updates will have to be reapplied.


    Good luck.

  • Windows Help and support does not start

    Windows Help and support will not start. I get an error that sent me to the web site for help.


    The 1st should help solve the problem, and the others are just in case.

    How to fix the Windows Vista Help and support

    Windows Vista and Support help pages do not display correctly

    "Help and support error" - Service not started

    Difficulty of support and Windows Vista Help

    I can not open Help files that require the Windows Help program (WinHlp32.exe)

    I hope this helps.
    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • I changed my motherboard and now does not start LR

    I changed my motherboard (PC Win 7) and 6 LR does not start

    I need to download?

    I have to start LR 5 and proceed to 6 LR?

    Thank you!!!

    Franco - Italy


    Yes you are right.

    You will need to load it again.

    Please see Download Photoshop Lightroom if necessary.

    Kind regards


  • One migrated from my virtual machine to another host VSphere and it does not start

    I have a virtual machine that I've initially converted to Hyper-V to host VSphere. After I did it would start very well, but I got up two errors when starting.

    "An IDE controller is found but the VM does not support the option" and

    "A plate supporting the option not found."

    When I looked at the hard drive in the settings it looks like it is not supported. Is it because I badly converted to Hyper-V to VSphere using VMWare Converter?

    But now, I configure VCenter Server and tested a migration of these machines to another host and using the VSphere Client. It does not start now. I get an error message that says.

    "Device 'drive hard 1' uses a controller that is not supported." This is a general limitation of the compatibility of the virtual machine with the selected host ESXi version. »

    Remember that it is the same VSphere host it is running on initially. Any suggestion would be appreciated.

    If it works now - is that correct? n ' forget not to award points useful and/or correct

    I removed these entries;

    ide0:0. FileName = 'PIC-JVM-v0001 - 000001.vmdk ".
    IDE1:0. Present = 'TRUE '.
    IDE1:0.clientDevice = 'TRUE '.
    IDE1:0. DeviceType = "cdrom-raw"
    IDE1:0.startConnected = "FALSE".
    ide0:0. Redo = «»
    IDE1:0. FileName = ' / usr/lib/vmware/isoimages/windows.iso '.
    scsi0:0. DeviceType = "scsi-passthru.
    scsi0:0. FileName = ' / vmfs/devices/cdrom/mpx.vmhba1:C0:T0:L0 '.
    scsi0:0.allowGuestConnectionControl = "FALSE".

    And added to them;

    ide0:0.clientDevice = 'true '.
    ide0:0. DeviceType = "cdrom-raw"
    ide0:0.startConnected = "false".
    scsi0:0. FileName = 'PIC-JVM-v0001 - 000001.vmdk ".
    scsi0:0. DeviceType = "scsi-disk" hard
    scsi0:0. Redo = «»

    Although there is a high probability that the other six you have to do will be similar to this, they will have to be assessed individually and modified accordingly.

    See you soon,.


  • I get this error message and Firefox does not start... EXC in ev handl: error: error definition property on NPObject!

    Firefox does not start and this message keeps coming back... I uninstalled and reinstalled... but nothing helped...

    EXC in ev handl: error: error definition property on NPObject!

    Disable the extension "McAfee Site Advisor" who has just updated 3.4.0 that probably out of block of addons list.

    • 'Ctrl + Shift + A' > find McAfee Site Advisor and use 'Disable', and then restart Firefox.
    • Do a Google search without problem
    • It seems that if you re - enable new Site Advisor and restart Firefox you agree. At least you know where to look if you get the error again, or research on Google to slow down.
  • 1410: HDD password appears and Windows does not start

    in a 1410 out of the blue sundendly apears a message PASSWORD HARD drive and windows will not start how to solve the problem?


    He password disk HARD is not removable without knowing the old password of HDD.
    If you n t know this password for the HARD drive is locked and it s not possible to use it.
    Unfortunately there is no other possibility

Maybe you are looking for

  • Satellite A200 - type single quote / Double

    When you type in MS Word / Outlook / Excel quotes brand (or apostrophe marks) fail to appear on the 1st key entryTwo citations appear on the 2nd key entryIt also allows to display special characters (for example: "+ e double points on the e").It must

  • Opening Weirdness

    I always use the V3.6 opening on El Capitan 10.11.2 iMac but I'm having issues. When I try to move photos to a new folder some are left behind. Duplicates also appear in various folders and some insights and/or main views have a blue tint to them. It

  • compatibility with windows 10 and 14 DAQmx

    I have some problems with some DAQmx screw, I'm trying to use SensorDAQ, Vernier scale but even when my computer recognices the device when I try to create an application with LabVIEW, he can find screws as DAQmx clearly task among others. I have Lab

  • drivers for presario C 700 with windows 7 Home premium

    Hello I, m having some problems with my laptop sound (like a weird audio bus I think could be the drivers) change the operating system to windows 7 Home Edition premium; Initially, this system came with vista, HP has no drivers for this laptop availa

  • Vista Sp2 installation fails with the error ASN1

    When I run the installation of SP2 through Windows Update or the standalone version I get the following error «end asn1» unexpected data  Anyone have any ideas? I tried everything I can think and find on the web or on TechNet.  I even reinstalled the