I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

Hi Izzy Nagar,

·         Exactly when you receive this error message?

·         Did you do changes on the computer before the show?

·         Do you have any extended monitor connected to the computer in the past or at the present time?

Follow the suggestions below for a possible solution:

Method 1: You can try to reduce the resolution of the screen (lower), then check if the message still appears.

Check also if the refresh rate of the monitor is set correctly and check the manual of the monitor for assistance.

Ways to improve display quality

http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-display-quality

 

Flicker of the correct monitor (refresh rate)

http://Windows.Microsoft.com/en-us/Windows-Vista/correct-monitor-flicker-refresh-rate

Method 2: Use the option ' enable video low resolution (640 × 480) "start, then update your video card driver and check if the problem still persists.

a. click the Start button, click the arrow next to Shut Down and then click on restart.

b. do one of the following:

·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

c. on the Advanced Boot Options screen, use the arrow keys to select activate video low resolution (640 × 480) and press ENTER.

d. connect to your computer with an account of a user who has administrator rights.

e. If you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information, see the article:

Updated a hardware driver that is not working properly

http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

 

I hope this helps.

Tags: Windows

Similar Questions

  • Each time after clicking the icon of user account on windows xp to change a password is crashes with this error message: Microsoft (R) HTML Application host has encountered a problem and needs to close.

    Each time after clicking the icon of user account on windows xp to change a password is crashes with this error message: Microsoft (R) HTML Application host has encountered a problem and needs to close.

    There is a Microsoft Knowledge base article which sets up a few steps to perform in the computer in order to solve the problem you are experiencing, read the article that you find on the link I am mentioning below and see if it helps the measures mentioned:

    http://support.Microsoft.com/kb/919751

  • Help with a frozen window. Adobe CC application installation is stuck at 2% for more than an hour. What could be my problems and I can't get out or should I wait?

    I opened Adobe Creative Cloud installation Center and he asked me to update. What does that mean? And then I pressed the update, and it's been sitting at 2% for one hour now with no sign of progress. Is it possible to restart that process, because there is no getting out acess. I keep close the CC and when I open it again, it is still at 2%. I'm not yet of any recommnedations online.

    I have a perfect home reception, so this isn't the problem. I have AI, Id, Lr, Pr, Fl, Ps and DW installed on my computer, but now I need to Encoder Adobe CC and I'm stuck waiting for the application Adobe CC for the installation of these stop smoking gel on me. Any help?

    Thank you. Rachel.

    Rachel, what version of operating system do you use? Try the below mentioned steps and let us know if it works.

    1. close the creative process Cloud (cloud of Creative, coresync)

    2. remove the cloud creative app - https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

    3. install Creative Cloud app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

    Waiting for your response.

    Atul_Saini

  • I need a windows vista Home Basic installation disc, I have a product of windows vista code, I had

    I have a hp conpaq turn and I don't have a Home Basic windows vista installation disc. the hp crashed and never booted up but recently I got windows 8 and I ins

    Hello

    With a HP Compaq laptop press you F11 on startup to start the recovery process.

    But, like the HP advises, if you install another Vista operating system, the recovery Partition is therefore more able to be used.

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    There are several methods to reinstall Vista.

    There is no Windows Vista downloads available from Microsoft.

    You can contact your computer manufacturer and ask them to send you a set of recovery disks.

    They should do this for a small fee.

    To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

    You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

    How to change the Boot order in BIOS:

    http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

    "How to replace Microsoft software or hardware, order service packs and replace product manuals.

    http://support.Microsoft.com/kb/326246

    Some manufacturers have more available Vista recovery disks.

    If this happens, you may need to try this instead:

    You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

    Other manufacturers recovery DVDs are should not be used for this purpose.

    And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

    Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

    "How to do a clean install and configure with a full Version of Vista '

    http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

    And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

    And phone Activation may be necessary when you use the above installation method.

    "How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    See you soon

  • Windows Vista cannot access the internet, the link speed and Duplex negotiation seems to be the problem

    I have a desktop running Windows Vista Home basic and I can't connect to the internet through a local network, which is connected through a router (Belkin). Adapter type is Internet: Intel 825562V-210/100

    After consultations with the support of technichal society of router and my PC vendor, it seems that there is aproblem with negotiating the link speed. Here are some symptoms:

    I can access the internet if I connect the cable directly to the modem;

    Connected through the router, I can sometimes connecting to the internet if Imaually change settings of connection speed (10 / 100 Mbps, half/full duplex)

    All other PC connected to the network, using Win Vista and throuhg connected to the same router, have access to the network;

    If I connect my network cable to another PC, it will have access to the internet;

    The status of my PC seems to be 'connected' on the site of implementation of routers. The State of my connection is sometimes "Local only" sometimes "Local and Internet", but in fat, there is no internet access.

    I tried the following:

    Trouobleshooting under the direction of the technical support of the router and PC vendor.

    Update the operating system to restore to an earlier date, to restore to the factory settings; Reformatting my PC 2 times, (first internet worked for a few hours only); update the OS (by connecting directly to the modem); Turning off Win Defender, removing software antivirus. Reset LAN connection...

    Any suggestion please?

    New router solved the problem.

    Thanks a lot, especially Jack :-).

    P.J.

  • I have a computer with Windows Vista business on her key. I have a dell windows vista Enterprise drive. the product to activate my acer desktop computer?

    Activation of WINDOWS VISTA oem with another oem drive?

    HI I have a computer with windows vista business on that key. Apparently, I do not have the original OEM drive but I have a dell windows vista Enterprise drive. the product to activate my acer desktop computer?

    Hello

    A manufacturer of recovery disc is designed for a particular brand and computer model; they are not interchangeable.

    Here is the link to order the Acer recovery disks:

    http://us-store.Acer.com/RCD/

    And if the Acer never included a drive to purchase, you should have a recovery Partition on your hard disk to reinstall Vista to how it was when new.

    With an Acer, you press Alt + F10 at startup to start the process of recovery back to new condition.

    See you soon.

  • Networking a laptop 64 bit Windows 7 with a desktop computer Windows Vista 64-bit

    I have a Dell desktop running 64-bit Windows Vista with a USB connected HP Photosmart printer operating system.  My wife used to have a laptop with an XP operating system and we have had no problem sharing the printer.  Now she has a laptop (HP) laptop to Windows 7 64 bit and fails to print.

    His laptop is connected wireless to Verizon FIOS router (wireless-g, I think).  I am connected by ethernet.

    If I look at a map of the comprehensive network of my Vista PC I can see his laptop and explore appropriate records of (public) level on his hard drive.   Sharing my Vista PC and are discovery options: network discovery:; File sharing:. Public folder sharing:; Printer sharing:; Password protected sharing: Off; The media sharing: Off.  My Vista shows the home network as a WORKING group.

    I use McAfee SecurityCenter and when I open the McAfee network map it also shows my wife's cell phone with its IP address.

    On my wife's cell phone two PCs appear on the map of the comprehensive network of the window and it shows my PC IPv4, IPv6 and MAC address, but if I try to 'Open' from my PC to the icon on the map, I get an error message suggesting I be spelled the name wrong or there is a network problem (error code 0 x 80070035 the network path was not found).  I ran the diagnostic of the error dialog box and he suggested to "make sure that the device allows incoming connections for printing and file sharing", the windows firewall settings.  Its network card qualifies to the network TPEN1, identity, assigned to the Verizon router. It shows his laptop connected by a dotted line (wireless)? to TPEN1 which is connected to a switch.  My PC is also connected to the switch which in turn is connected by a bridge to the Internet.  Options advanced sharing his PC for the home or work (current profile) are set on: turn on the discovery network. Enable file sharing and printing; Turn on sharing so anyone with network access can read and write files in public folders;  Media streaming is disabled; Use 128-bit encryption to protect file sharing connections (recommended); Disable password protected sharing;  Use the user accounts and passwords to connect to other computers.

    Its Norton Internet Security Network security map shows my PC as being in line with trust to full trust level.  It also shows the Swith and 2 generic devices with Shared Trust.

    So... anyone have any suggestions?

    Hello

    Maybe this can help.

    - ---------------------

    This message looks like a long history because I don't know what is the level of knowledge of the user, and what has already been done.

    The info goes through the motions of the configuration and verify most of the common aspects of the functionality of Windows OS' LAN.

    ----------------------

    Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

    Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

    Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.

    Public share
    = network Public (as Internet Café) in order to reduce security risks.

    For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

    http://www.ezlan.NET/Win7/net_name.jpg

    Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

    General example, http://www.ezlan.net/faq#trusted
    Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

    Since you have a network with Win 7 and the other version of Windows, you must configure Windows 7 as work network.

    In the center of the network, by clicking on the type of network opens the window to the right.

    Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

    http://www.ezlan.NET/Win7/net_type.jpg

    Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

    Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

    Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

    When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

    -------------

    If necessary check specifically Permission/security settings.

    Point to a folder that wants to share do right click and choose Properties.

    In the properties

    Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

    This screen shot is to Win 7, Vista menus are similar.

    http://www.ezlan.NET/Win7/permission-security.jpg

    The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

    When everything is OK, restart the network (router and computer).

    Please note that the users and groups listed on the screen shoot are just an example. Your list will focus on how your system is configured.

    ---------------------

    You should consider that many times the final solution could involve total uninstall of the 3rd party security Suits.

    In this case, you can be set at the same level with installing Microsoft Security Essentials which are used in the applications of a native Vista/Win 7 firewall and AntiVirus/AntiSpyware.

    http://www.Microsoft.com/Security_Essentials/

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • I have a desktop with windows 7 and a linksys E1000 router and you want to connect a laptop with windows 8, it will work router?

    I have a desktop with windows 7 and a Linksys E1000 router and you want to connect a laptop with windows 8, it will work router?

    Yes, it should work perfectly, if wired (Ethernet) or wireless.

    Click on the network icon in the Notification area

    Click on the available wireless network that you want to connect

    In the list of available wireless networks, click a network, and then click on connect.

    Some networks have need a network security key or password. To connect to one of those networks, ask the network administrator or service provider for key security or password.

  • How do we install a page active desktop, my windows vista, my xp and windows 7, as all three, I need help please

    I really need to insall a active wallpaper but don't know how to do in this regard, I have a XP, Vista and Windows7 computer, can someone tell me how to on this subject, I really want to put on one of my creations, but need help.

    I really need to insall a active wallpaper but don't know how to do in this regard, I have a XP, Vista and Windows7 computer, can someone tell me how to on this subject, I really want to put on one of my creations, but need help.

    Hey jennyanderson99

    as you ask specifically about active desktop, here's what it is, or in your case what she was before vista released

    Active Desktop is a feature of Microsoft Internet Explorer 4.0 Windows Desktop Update that allows the user to add optional contentHTML on the Office, as well as a few other features. This feature was designed to be installed on theWindows 95 operating system then in force. It was also included inWindows 98 and later Windows operating systems up toWindows Vista, where the feature wasdiscontinued. This corresponds to the version ofInternet Explorer 4.0 to 6.x, but not Internet Explorer 7.

    HTML users can add in place of the ordinary wallpaper as independent resizable desktop items. Items available online can be regularly updated and synchronized so that users can stay up-to-date without visiting the site in their browser.

    Active Desktop works as the technology of desktop widget that allows users to add customized their desktop information.

    Here is information for active desktop for xp

    http://www.ehow.com/how_6366085_make-XP-Active-Desktop.html

    information from wikipedia about active desktop are less than

    http://en.Wikipedia.org/wiki/Active_Desktop

    The introduction of the Active Desktop brand attempt by Microsoft to take advantage of the ephemeral trendtechnology push led by PointCast. Active Desktop has imposed a number of "channels" ofdesktop computers that provided information updated continuously, such as headlines and stock quotes, without the user to open aWeb browser of the user.

    Active Desktop debuted during the publication of 1997 of Internet Explorer 4.0 for Windows 95 and Windows NT 4.0, install it as a feature of theWindows Desktop Update offered to users during the upgrade option. The Windows desktop update is commonly referred to as (bad) Active Desktop itself, but it is actually a whole Windows shell to level v4.0 to v4.71, or v4.72, with many changes in the Windows interface, resulting in a level look and features almost indistinguishable from the Windows 98, then again to-be-released. Features include the ability to allow uppercase filenames (the old v4.0 Desktop would forcibly filenames in title case uppercase), the dynamic tracking file selection click configurable, customizable by HTML, QuickLaunch folder display settings mini buttons on the taskbar next to the Start button, improved to Start Menu drag and drop re-organization of the elements and menus contextual click right to rename point etc. With the update, Windows Explorer now has an address bar in Internet addresses that can be entered and driven seamlessly.

    Active Desktop was widely regarded as a failure, with one of the main problems being its use high system and reduction of the stability of the system resources. Although not used[citation needed], the availability of Active Desktop was decisive for the legal argument Microsoft in antitrust case of United States v. Microsoft , that Internet Explorer has a feature of Windows, not a separate product.

    Later use

    Windows Vista has replaced the Active Desktop withWindows Sidebar (now called Gadgets Windows Desktop fromWindows 7), which also allows the components to add to the desktop. Windows XP is the newest operating system from Microsoft to support Active Desktop. It seems that the 64 bit version of Windows XP supports is no longer Active Desktop. It provides always the option to display Web pages and channels built with MicrosoftChannel Definition Format (CDF) on the desktop.

    Display HTML features are now mainly used for creating wallpapers originals and adding the fields of desktop search. For example, a user can copy the following code to display the search box of Wikipedia on the desktop:

    Walter, the time zone traveller

  • I have 2 versions of windows vista running on my computer. One is before it crashed and it took all the RAM (Ram)

    I can't clean the discs because I can't load any programs because the memory has faded.  So I can not put a page of my computer desktop or download programs, I need to get my images that I have on the other program running.  I can't open one of these programs because I don't have the authorization even if I was always the user and administrator.  What I would do.  Can I add more memory Ram?  Can I remove the old stuff that I can't open anyway.  DLLs etc.  I downloaded vista 2pr, but it does not work.

    Hello

    Here is the information from your other question here about it:

    "I can't collect any information of my system information page."  When I connect I get redirected to a page that asks me what version of vista I want to open.  One is Microsoft vista and the other is windows vista.  The Microsoft is the only one that works. The other takes me a blank page. »

    "I have 2 versions of windows vista running on my computer. One is before it crashed and it took all the RAM (Ram).

    I suggest that you save your data and reinstall the operating system properly.

    There are several methods to reinstall Vista.

    See what methos works for you.

    There is no Windows Vista downloads available from Microsoft.

    You can contact your computer manufacturer and ask them to send you a set of recovery disks.

    They should do this for a small fee.

    To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

    You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

    How to change the Boot order in BIOS:

    http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

    "How to replace Microsoft software or hardware, order service packs and replace product manuals.

    http://support.Microsoft.com/kb/326246

    And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

    The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

    Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

    Ask them to the proper key sequence.

    And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

    Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

    If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

    Some manufacturers have more available Vista recovery disks.

    If this happens, you may need to try this instead:

    You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

    Other manufacturers recovery DVDs are should not be used for this purpose.

    And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

    Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

    "How to do a clean install and configure with a full Version of Vista '

    http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

    And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

    And phone Activation may be necessary when you use the above installation method.

    "How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    See you soon.

  • I have an optiplex 745 windows vista ultimate and it keeps freezing.

    Original title: freezing problem

    I have an optiplex 745 windows vista ultimate and it keeps freezing. Can someone please?

    Hello

    See if this helps you:

    Search for malware, if necessary using the safe mode with networking.

    http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    Once in Safe Mode with network, download and run RKill.

    RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

    http://www.bleepingcomputer.com/download/rkill/

    Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

    http://www.Malwarebytes.org/products/malwarebytes_free

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    You can clean your hard drive using these two methods.

    "Delete files using Disk Cleanup"

    http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

    Using the free CCleaner program:

    http://www.Piriform.com/CCleaner

    In NO case use the registry cleaning Option in CCleaner

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    Update drivers:

    Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    "Optimize Windows for better performance.

    http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-Vista

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    It would be a good idea to run the System File Checker tool if you have corrupted files

    "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

    http://support.Microsoft.com/kb/929833

    Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

    1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
    2. Type the following command and press ENTER:
      sfc/scannow

      The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

    If SFC detects serious flaws, you may need to perform a repair upgrade Installation or relocation complete if you don't have a Vista DVD from Microsoft.

    If you can borrow a DVD of Vista from Microsoft you save doing a reinstall full:

    "How to perform a repair for Vista Installation"

    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    See you soon.

  • I have HP COMPAQ 6710 WINDOWS VISTA, I HAVE LOSS MY OS HOW to GET IT?

    I have HP COMPAQ 6710 WINDOWS VISTA, I HAVE LOSS MY OS HOW to GET IT?

    Hello

    You can contact HP and ask them to send you a set of recovery disks.

    They should do this for a small fee.

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

    The recovery process can be started by pressing F11 at startup. (Power on / start)

    You can also make your own recovery discs.

    "Recover Windows Vista operating system using HP Recovery"

    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

    For the HP Recovery Manager.

    The backup and HP Recovery Manager on HP Pavilion and Compaq Presario computers is a versatile, easy to use application that allows you to:

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    Some manufacturers have more available Vista recovery disks.

    If this happens, you may need to try this instead:

    You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

    Other manufacturers recovery DVDs are should not be used for this purpose.

    And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

    Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

    "How to do a clean install and configure with a full Version of Vista '

    http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

    And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

    And phone Activation may be necessary when you use the above installation method.

    "How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    See you soon.

  • I was getting a new hard drive to my HP laptop. Since I have a key for Windows Vista from the purchase of the laptop, how can I get the disk to re install the operating system?

    I was getting a new hard drive to my HP laptop. Since I have a key for Windows Vista from the purchase of the laptop, how can I get the disk to re install the operating system?

    original title: reinstall Windows Vista

    I was getting a new hard drive to my HP laptop.  Since I have a key for windows vista from the purchase of the laptop, how can I get the disk to re install the operating system?

    Contact HP (if they had not initially you provided with support or the media manufacturing process or you have lost the media and/or you don't want EU to some tools to clone the old drive to the new or can not do...) for a copy of the media restore/recovery of your system.

    http://www.ZDNet.com/blog/Bott/lost-your-Windows-discs-how-to-get-replacement-media-legally/4320?PG=3

  • I have a HP Pavilion Windows Vista Home Premium, and the D: drive is full.

    I have a HP Pavilion Windows Vista Home Premium, and the D: drive is full. I don't understand how he got that way... but... I've never used windows to the top, however I do back up with my Norton Security.  I'm not a COMPUTER guru AT ALL and am very confused as to what must be saved for me to do a system restore.  I just made a backup on a 16 GB usb flash drive, which included photos, documents, email, contacts and music.  But what of my registry or my drivers I've updated on the latest updates of 2 years and windows?

    So in plain English for the layperson to the computer, lol, can someone tell me...

    1. where should I back up to? (windows, norton?)

    2. what should I back up? EXACTLY, please. lol (I have hundreds of games, I don't want to back to the top if possible)

    3 and... HOW MUCH ALCOHOL SHOULD I HAVE AVAILABLE WHILE TRYING THIS. LOL just kidding. Laughing out loud

    Hello

    Updates must be installed in a certain order and no Service Pack must be installed unless and until it is offered through Windows Update.

    However, try these options:

    Step 1: You can not reuse what already automatically downloaded and installed. You can however save updates and install them manually if you wish.

    Step 2: You can create a system image on the computer. A system image is an exact copy of a disc. By default, a system image includes the drives required for Windows to run. In addition, it includes Windows and your system settings, programs and files. You can use a system image to restore the contents of your computer if your hard drive or computer ever stops working.

    See:

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-programs-system-settings-and-files

    http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

    Also, you can see the following link for more information about Windows backup:

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  • Photo constantly order of photos in a slideshow changes no matter how many times the movements of the user the photo back to the good look at an order. Example: Bathroom Plans eventually grouped with pictures of kitchen! I have found no way to stop this o

    Apple Photo 1.3 serious problems - how can I SOLVE all these problems?

    (1) breaks down without rhyme or reason no matter where I am in the workflow.

    (2) pictures will not be Shut Down Every Time, even after several days of waiting.

    (3) aPhoto frequently badly chooses picture in the EDIT picture option, I get a picture different than the one I clicked on which is on a 100 pictures in a row.

    (4) picture constantly order of photos in a slideshow changes no matter how many times the movements of the end user the photo back to the good look at an order. Example: Bathroom Plans eventually grouped with pictures of kitchen! I have found no way to stop this weird behavior! Is there a way to stop this? If I drag the photo again some 7 additional photos in the slide show, after a minute or less, he appears again to where it was it not. [email protected]#$%$#

    (5) If you make any CHANGES to a photo, it often changes the appearance of your complete slideshow of this picture with impatience. So you lose all this not work fix your configuration of the slide show. Even changing the order of photos once more that I had put back where they should be. [email protected]#$$#@

    (6) photo identifies often shades of lamps and long door handles as the faces of the people.

    (7) photo made bad decisions when it comes to brightness, contrast and colors effortlessly around other than to use other software, where as with iPhoto there was a lot of workarounds. I could continue, but will save one who might be reading of this.

    I am up to date on all updates for my Mac. If anyone have REAL answers so please spilling the beans, but according to me, it's the only truth is that Apple has rolled out a product inferrer to replace an exceptional product, called iPhoto, which does not work on my new iMac computer 5K of 27 ".   If I knew what I would have chosen another computer that I use iPhoto to prepare more of fifty to sixty thousand photos in a given year and I use iPhoto to make hundreds of slideshows from it.  Are there plugins for Photo 1.3? I ask because I see where there could be Add-ons, but I can't find.

    Apple has taken a serious decision by turning his back to iPhoto and tens of millions of loyal users.

    Thanks in advance to anyone brave enough to tackle this job.

    James

    First, back up your library of Photos and hold down the command and option keys while launching Photos - repair your database - you have a corrupted database

    LN

Maybe you are looking for

  • How do I add to itunes library without duplicating files

    I have two computers and therefore two local iTunes library. A while back, I moved my iTunes Media on dropbox folder location, like that I could have one place two libraries would draw from. When I got new music I would like to import into a library

  • Satellite X 200-219: what is a pilot NVCACHE?

    I have a satellite X 200-219.I set it up to dual boot with 2 copies of Vista. Recently, I noticed that a new "disk" has been created in my computer called NVCACHE. Its 500 MB in size. Windows keeps informing me that I am running out of room on it, wh

  • failure of the disk drive - pre-seed evaluation results

    Our computer gives the message "disk failure hard press f1", but he just keeps repeating this message when I press f1. I ran the ePSA pre-boot system assessment.  It gives a green checkmark to all devices listed on the left, but lists s/o to disk.  B

  • BitLocker data lost

    I was experimenting with a system dual boot, and I did it with xp 32 bit and win7 64 bit. Everything was fine for a while - if I had used my external drive for time who has two partition a partition is open and one is locked by bit locker... I manage

  • Confusion of keyboard.

    I use my S10-2 primarily as a jukebox.  Imagine my surprise when I tried to go online to discover that when the SHIFT key is used to type in my email address '@' will not appear. Instead, I get a blur "-[quotation marks].  Also along the line to key