I have a hp color laserjet 2840, I can't print with my Dell pc windows7

I have a hp color laserjet 2840, I can't print with my pc dell with windows 7. Please help me. Thank you

badedo,

This laser model was for XP. There is limited support driver for WIN7.

Just click on the link, select either the WIN7 32-bit or 64-bit and read the support documents to understand how to install it.

http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=445197&lang=en&cc=CA&prodTypeId=18972&prodSeriesId=445194&TaskID=135

Tags: HP Printers

Similar Questions

  • Color LaserJet Pro CM1415fn MFP - professional printer with just a feeder?

    I'm confused. He is a professional office color printer - which means that a number of print media will be used to print on a daily basis.

    And after buying this printer at Amazon, I discovered that there not a manual feed tray and one paper tray.

    I have print of legal documents - copy desk in our records, on cheap paper, a paper of good quality to the client and an envelope.

    So I have to print a simple letter to remove and replace the Board THREE TIMES. This is not good.

    My simple Canon printer internal, or any other printer I've seen ALL have manual power option.

    QUESTION: could you please let me know if there is an attachment to this printer that would allow me to print manually, or should I send the printer to the shop?

    Hi GarryStotel,

    No, this printer does not have an add on the extra add envelope feeder on the plates as accessories. Looks like you need a little higher level printer as one of the following units (color HP LaserJet Pro 300 M375nw MFP color HP LaserJet Pro 400 M451dn printer) I included a link to your review these printers below.

    http://shopping.HP.com/en_US/Home-Office/-/products/printers/printers?SearchParameter=%26%40QueryTerm%3D * % 26brandprinters_dte2% 3DLaserJet % 26categoryusageprinters_dte2% 3DBusiness % 26CategoryUUIDLevelX %3 D 6. YQxXjbkYMAAAE0nvZcZzO9%26TieredPricing3%3D%255B400.0%2BTO%2B599.99%255D%26%40Sort.TieredPricing%3D0&PageSize=15

    LaserJet CM1415fn:

    Overview

    • Print, copy, scan - in color - and fax, with the first HP LaserJet printing from the Web and mobile devices. To connect to a wired or wireless network. [4] using a screen color touchscreen to print sharp documents. Save energy and reduce your impact.

    Ideal for the

    • Companies that are looking for Wi - Fi and networking in a color multifunction capable of printing from the Web via a touch screen and applications and mobile devices.

    Features

    Put easy, touch screen, print on your desktop.

    • Use business apps and the 3.5-inch (8,89 cm) color touch to access and print the information on the Web. [7]
    • Stay productive on the move. With HP ePrint, now you can print from virtually anywhere. [6]
    • Now with AirPrint™. Simply print wireless from your iPad®, iPhone®, iPod Touch®. [9]
    • Spend more time on the business and less time on the program of installation and maintenance.
    • Easily copy on both sides of an ID card to a front document.
  • How to load the driver scanner for HP color LaserJet 2840 via ethernet

    I am trying to load the scanner driver for HP color LaserJet 2840 via the network. When I got to the driver download page, I have two choices. We're driver HP color LaserJet 2820/2840 PCL6, the other is HP color LaserJet 2820/2840 PCL6 Plug and scan/print driver Solution play I don't know which I should choose. So I downloaded both.

    Then I followed the instructions on this page... http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=. I have correctly installed the driver HP color LaserJet 2820/2840 PCL6. But I do not know if the driver drives the scanner. And I could not print any test page either. I don't know if I installed this driver properly.

    But when I tried to follow the instructions to install the driver HP color LaserJet 2820/2840 PCL6 Plug and scan/print driver Solution play, I was confused when I tried to select the .inf file. There are a lot of .inf files in the directory. I had no idea which one I should choose. Also, I tried to run the EZInstall.exe, but it seems to only support direct connection via USB and not via the network.

    Could someone help me with this? Please let me know which version of the driver should choose, and how do I load this driver.

    Thank you!!

    One supports network connections, the other being a pilot plug-and-play (PnP) is configured to initialize and works with a USB connection.

    Let me know if makes you better in the right direction.

    Have a wonderful day!

    -Spencer

  • color laserjet 2840 scrolling out of control control panel

    My HP color laserjet 2840 Control Panel scroll out of control.  The screen lights up and you can read "Hewlett-Packard", but nothing else.  Under the words "Hewlett-Packard" that seems to be something (probably the word "Ready") scrolling to the right on the left of a way very fast, unreadable.  I can't print with this problem.

    I recently installed a mod for additional memory, but preinted fine a few days before, so that's not the issue.

    If anyone has any idea how I can return to the "Ready" State, I would really appreciate it.  Thank you.

    Thank you for the reset option.

    Since my original post, I called HP support and they told me that they don't support any more of my printer.  I was even unable to discuss the issue, which has been quite disappointing.

    I ended up out the memory mod that I mentioned in my post and the screen of the printer stop scrolling.  I had the feeling that it was the question, because it was the only variable, but it was the good mod, so I wasn't sure.

    In the meantime, I was forced to buy a new printer because I needed one and now I have an extra.

  • HP color laserjet 2840 printing and copy blank page

    Hi all

    I have hp color laserjet 2840, printing and copy empty, I change the toner and drum but nothing! any idea?

    Sorry for my bed English

    Thank you

    Try this test.

    Printed page in after you get the blank page open the access door and see if you can move the carrousel by hand.

    If the carousel will rotate the carousel latch is stuck.

    The lock can be fixed by disassembly of the valve and clean some foam sticky residue deteriorated and its replacement by a thin piece of material. I use stickers very thin markers of a dollar store.

  • Series of printer HP Color LaserJet 2840: not able to configure the functionality of SCAN to e-mail or a folder

    Have a series of HP Color LaserJet 2840 printer on a local subnet for home with two computers that share.

    We can make regular features print very well.

    We cannot get the SCAN function to work for the scan to e-mail or in a folder.

    Went and used the HP Toolbox to set options analysis, but for some reason, they are not taken.

    The Guide of the user for this problem are usless (as usual with the documents of the user).

    I have spend too much time on this seemingly simple question, as usual.  (months of work on this periodically)

    I'm sure that's not that hard to implement.

    Can you please help or advise.

    Additional information:

    2 computers on the subnet local via 100MB ethernet switch and router (basic stuff)

    No problem of communication to the printer for print jobs or check on other orders of status.

    Some scanning configuration problems.

    Two client computers are running Windows Vista Home Premium SP1 32-bit

    I want to set up the printer so I can scan from the printer directly to a folder on the machine either or e-mail to each machine.

    I do the steps correctly, from what I can tell, but the info is not required or sent to the printer. ?

    If I add an e-mail through the box to tools, I can fill in the email field and the name field, but it will not show when I hit Add.

    Besides which should represent the box 'Host '?  The printer or my personal computer?

    If I try to add a file, it displays a browse box but never lets me select a folder to scan to?

    I don't understand.  Shouldn't be this embarrassing.  And if it is, (as usual), the stupid tech docs should do a better job MUUCCHH through it.  In fact, they don't even show or talk about the Host column.  So what is this for.

    Help, please...

    I'm sorry, but to get your question more exposure I suggest posting in the trade forums since it is a printer. You can do so at http://h30499.www3.hp.com/hpeb/

    I hope this helps.

  • HP Color Laserjet 2840 and windows 8.1

    I was using my printer HP Color Laserjet 2840 all-in-one and then upgraded to upgrade to Windows 8.1 and a new computer system.  I was told that this printer is compatible with 8.1 (by HP support staff) only to find out that I can not format my analysis in a pdf file, a jpeg file only.

    I'm curious to know why Windows 8.1 does not support the PDF on this printer?  So I wonder if I mess with the jpeg file or to splurge on a new printer.  Will there be an upgrade on the printer driver on HP that would restore the pdf to this printer on a scan function?  I have reviewed again printers still want a Color LaserJet all-in-one and found the HP Color LaserJet Pro 200 at a reasonable price that is supposed to be Windows 8.1 bearable.  Any comments or solutions would be appreciated!  Really want to buy a new printer, if I did not also.

    All you need is a PDF Converter.  There are many other free published on the Internet through web services and applications that you can download to your PC.  With a PDF converter all you need to do is create a new scan in .tiff and leave the converter format for you.

    . PDF is a file owner belonged to Adobe type.  Only licensed products are allowed to create. PDF documents from scratch.  If I had to guess that the particular license with your expired for Win8.1 and HP printer model are not interested in this renewal.  Therefore, you will need to use the free image formats and work with an Adobe product on your own for. Supported on this model of printer.

    If you are considering the purchase of a new model of the printer, then check the full software downloads that are available.  If HP has a comprehensive software solution that is available then the chances are good it can withstand. PDF on Win8.1.  If no complete solution is available then HP may be the development or licensing to support and you will have to depend on the free TWAIN drivers and free file formats that are universally available.

  • paper in color laserjet 2840 jam. error paperdraw broken paper removed, remains in the display. Windows 7

    I had a paper get stuck in my printer HP Color LaserJet 2840. I removed the broken book. Then it hapenned again.

    Deleted the book broke for the second time and now the error message on the print remains on the screen.

    Also when I restart the computer os turn off the printer. I also looked at the printer, but I don't see anything.

    Troubleshooting page here can help.

  • HP Color LaserJet Pro M176n can take care of Terminal Server print?

    Hi all

    Because my HP P1102 printer cannot print RDP, so I decided to buy a new printer for the printing of the server terminal server. I am currently using Windows 7 64 bit and the terminal server of my company is can I 2008 Server 64 bit.

    Someone know if HP Color LaserJet Pro M176n support RDP printing needs? If not, please would you advise another model of the printer for the printing of the server terminal server thank you.

    Kind regards

    Lapson

    Don't worry about the model of the printer when you print from.  Is the printer driver which needs to understand where the print job is coming so that he can pass the print stream to the printer.  If the printer driver is not allowed to communicate between the server and your computer, then you must correct this problem first.

    Printing from a Server Terminal Server is normally something that needs to be configured when printing to a USB cable.  Your RDP client has its enabled print transfer function which allows him to pass the objects on your printer to your personal computer on the server.  Without the correct feature is enabled, you will not be able to print with any printer USB model.  Check with your system administrators to see if they can enable redirection of printer for you.

    Otherwise, you will need to find a way to install your printer on the network.  This can be difficult if you are telecommuting from a personal network printer does not exist on the corporate network.  It's less that you can get your company to install a router with a VPN feature on it.  In this way, you can connect multiple personal devices on the corporate network.  However, your network admins should be aware that you eat additional IP addresses on their network and that he can't ask you to do it at all.

    Otherwise print on a network currently on the network printer should be child's play.  All what you need to do is install a UPD on the server and that it points to the IP address of your network printer desired.  The server will have no problems to send jobs to the printer from here.

  • using the color laserjet 3600n - I want to print in black and white, but it prints black and white negative. * beep *.

    using the color laserjet 3600n - I want to print in black and white, but it prints black and white negative.  * beep *.

    I was able to recreate what you see.   I managed to work around it by installing a different driver that is also supposed to be compatible with the CLJ3600.

    Please consider trying this as a possible solution:

    (1) uninstall the driver CLJ3600 by opening printers and fax machines, driver selection and right-click on it and select Delete.  Once it is removed, right-click on an empty space in the windows printers and faxes and select Server properties.  Click the driver tab, click the CLJ3600 and then click on remove.

    One when you're done, restart, and then install the CLJ3500 driver.  This is a previous version of the driver that has been implemented for the CLJ3600 and is compatible with the CLJ3600.

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=315862&prodNameId=315867&swEnvOID=228&swLang=8&mode=2&TaskID=135&swItem=LJ-16838-3

    After installation, try printing again.

    The output I have indicates it will print is more negative.  Please let me know if you have success.

    One caveat about this solution.  The Color LaserJet 3500 doesn't support duplex.  Of workaround only works for two printing on the package of basic or the Color LaserJet 3600 N.

  • I have a samsung s3 android. How can I print from my hp wireless printer? How to intsaller it?

    I have a samsung s3 android. How can I print from my printer hp DJ3525 wireless? How to intsaller it?

    Hello

    Please use the following application:

    https://play.Google.com/store/apps/details?ID=com.HP.Android.print & hl = in

    (Note: you printer must support this otherwise it will not work).

    Good luck.

  • HP Color LaserJet 2840 confused with 2830

    Hello, everyone

    We had problems with our HP Color LaserJet printer 2840, so I took it to a store of the local computer for repair.  (The problems were that the printer has been really bad grinding and tray 2 had stopped working...)  So, I came back from the shop, and these problems persist...  But it is a different matter, with the store I had this 'repaired' at...

    Here's my new problem: I plugged the USB cable into the printer and put the power cord back where it belonged.  Interestingly, Windows XP decided to not detect it as a new piece of hardware, but he insisted on detect it as a HP Color LaserJet 2830.  Again, we have a "2840", not a "2830.

    I don't know what the difference between the two models, all I know is that Windows XP has never detected this printer as a "2830" before.  I then proceeded to delete all printers and then re - install the appropriate driver.  Unfortunately, the installation failed.  Who, even once, never happened to me before with this printer.  At half-way I suspect that if I could get Windows XP to detect this printer as a "2840", which it IS, instead of a "2830", which is NOT, that maybe the driver install might work.  But that's pure opinion

    A reasonable question you may have is "are you sure they gave you YOUR printer back?  What I know for sure right now is that the model number printed directly on the top of the unit says "2840", not "2830" there was at least a note that one of our Church stuck on the printer.  For this, I'll watch the next time I see the printer...

    So, I have two questions:

    1A this problem never happened before, and what could be the cause?

    2, and the BIG QUESTION: How can I get Windows XP to understand that it's a 2840 and not a 2830?

    Thank you for your help

    Steven P. Ulrick

    Hit the cable for card reader lose - if you pop the side cover you can put the cable on.  If the cable is firmly attached, then the card reader is dead.  He was supposed to be a released 2830 who had the fax but no card readers, but at some point, they cancelled this decision.  However, the firmware was written for all 3 models, so when the printer detects a fax but no card readers, he is noted as a 2830.

    The carousel grinding and not by pulling the tray 2 means he needs an interview by a truly qualified on this particular model HP technician.  Tray 2 should be easy enough to fix, but the carousel may have to be realigned and this isn't an easy task.  You may need to call anywhere or to go out of your way, but find a service center authorized in this model of printer.

    I worked on this model myself for a few years - if you think a carousel of Squeak is bad, try to listen to 4 or 5 of them all at once!

  • Color Laserjet Pro M452nw: Not accepted print job

    Just installed a new HP Color Laserjet Pro M452nw today, it connects using wireless to my network.  I followed the installation instructions and everything seemed fine and I was able to print the test sheet.  However, when I try to print a document from my MacBook, I get an error message in the print queue, declaring: "Print job not accepted."  I saw the support log, find others with the same question, but maybe on the models of different printers.  In any case, I have followed the instructions for the patch, installed a new printer driver Apple, reinstalled the printer, reset the printing system and I keep having the same problem.  Furthermore, he sometimes interrupts the print queue after encountering the error.  Do not know what to do...

    Hello @sanovogo

    You can try the following changes

    Go to the network set up on the printer and network services, disable ipv6 (disable)

    Go to the link (always within the network set up the menu) speed and the complete change to 100TX

    Sent a new print job to the unit

    If it fails while you see the error on the PC to the printer and try to deal with a report of configuration in the menu reports

    Get the IP address on the right side on the 1st page under settings of the printer

    Enter the IP address in the URL of web browsers, this online application should open indicating the status of the printer in this way can isolate you the connectivity to the printer

    If by this desire to point showing the error on the PC, you can print the configuration report and Web site opening, I'll suggest another pilot, because it must be the one having the problem I could give other recommendations but will like to know what happened first

  • LaserJet MFP M177fw Pro: Pro LaserJet MFP M177fw can't print in color

    I recently bought a new printer and decided to go for the color option. I am wanting to set up so it appears only in black because I only print in color occasionally! I've changed all the settings that I can see and put them in black and white, but always through a program called bistrack, which he still print in color! I've even increased the low threshold of are color cartridges and said to the printer to print in black when the threshold is reached... but still, it prints in color through a program.

    PLEASE HELP SOMEONE!

    Hey @robertsinclair,

    Welcome to the Forums of HP Support!

    I understand that you have problems with printing in black only from your printer Laserjet M177fw range when you use Bistrack. The printer works properly black from other programs, the problem is with Bistrack. I suggest you contact their support solve your problem.

    Either way, I'll mention that the printer still uses a little color when printing in black as a base to give your impressions the sharp looking you would expect from a Laserjet. If the printer gives you a warning that you are very low on a color toner, replace it. This time will keep your bright impressions and will prevent the printer to get damaged.

    Please let me know if this resolves your problems or if you go to a resolution. If you do, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  • HP Color Laserjet Pro M252 - not to print a PDF file

    Hey Adobe Forum,

    I have a problem with a M252 Pro of Laserjet of color HP which will not print all PDF documents. When you try to print a PDF file, the document is idling to "print...". ».

    Information about the current configuration:

    1. the customer is on a Windows 7, 64-bit workstation.

    2. the pilot is the last on the site - HP Color Laseret M252 PCL6. I tried the PCL5, PS and HP universal printer drivers.

    3. the printer has been added as a local printer TCP/IP (10.45.157.31/24) and a shared printer from the server. The two did not work.

    4. the workstation has Adobe Reader X installed the latest updates. The upgrade of the revision to XI or higher version is not an option.

    5 other files can be printed such as images and Microsoft Word documents.

    6. I tried setting Adobe for 'Print As Image '; It did make a difference.

    If anyone has any suggestions, please let me know.

    Thank you

    Max

    It turns out that, the question not print was the result of an incompatibility of duplex on the switch port to which it was connected. I tried an administrator account that does not correct the problem. Print jobs were still sitting in the queue up to 5 minutes after selecting printing. A PDF file passes finally after minutes of waiting, but was cancelled by users after assuming it was the slightest error / stuck.

    When checking switch, there was a lot of duplex mismatch errors in newspapers. Double-sided printing has been on before auto however there may be problems with automatic duplex printing. I put the port 100 Mbit/s/full that if it is in offline mode. I put it at 10 Mbit/s/full and it came online and all problems solved.

    Thank you for your help.

    Max.

Maybe you are looking for