I have a HP compaq cq40-340tu
I have a HP compaq cq40-340tu and I can't have my disk for my drivers. I tried to watch any downloadable driver for my laptop but I do not find anything on the site of hp, on site there are 343 cq40 drivers cq40-346 but none for my laptop... can someone help me please?
I am using Windows 7 32 bit... btw...
Tags: Notebooks
Similar Questions
-
Downgrading to Windows XP to Vista - drivers CQ40-340TU need it please!
I just bought a laptop yesterday, Compaq Presario CQ40-340TU. It came with the operating system Windows Vista Starter. Due to limitations with networking, I need to install Windows XP on this laptop now. I have my own installer of Windows XP and cannot afford to buy a different version of Windows Vista, so this isn't an option for me.
I really hope someone can help me find drivers for Windows XP for the following items. I don't even know if they have the right plug for my laptop model, but I found them on a site selling the same model and HP's product information page.
I already have nLite and I'm ready to integrate with my installer of Windows XP SATA drivers but I don't know what drivers to include. Please, help me!
Technical specifications
Processor Intel Pentium Dual Core T4200 (2.00 GHz, 800 MHz FSB, 1 MB L2)
Chipset Mobile Intel GL40 express chipset
Free DOS operating system
Graphics Intel GMA 4500 Graphics card
Up to 1759 MB of Intel DVMT 5.0 video memory (64 MB of memory dedicated, up to 1695 MB of shared memory)
Screen WXGA 14.1 inch Panel high-definition * widescreen
Memory 1 GB DDR2 800 Mhz
Housing of 2 memory Slots
250 GB SATA HDD
Optical drive Super Multi 8 X drive with Double Layer Support
10/100 integrated network/wireless implementation high-speed 56K modem, LAN, 802. 11 a/b/g WLAN, Bluetooth
Integrated 5-in-1 memory slot digital media card reader (xD, SD, MMC, Memory Stick and Memory Stick PRO)
Webcam integrated i/o, RJ-45, headphone port, microphone, omnidirectional microphones (2), power adapter, output S-video, Kensington lock, VGA, USB 2.0 (3), Rj - 11, HDMI port
6-cell Li-ion battery
65W AC adapt Power
Dimension (Lxwxh) 33,40 cm (W) x 23.70 cm (L) x 3.3 cm H
Speakers Sound Altec Lansing® speakers
Approximate weight of 2.29 kg (5.03 lb)* edition: profile for www.asianic.com.ph
I would appreciate a response from anyone... I have not enjoyed my new laptop because of the problems with the networking. Help, please.
Message edited by JuzAnotherGurl on 03/24/2009 09:33Message edited by JuzAnotherGurl on 03/24/2009 09:34Rakhmads post should work for you:
http://h30434.www3.HP.com/PSG/board/message?board.ID=OS&message.ID=6092&query.ID=569151#M6092
http://h30434.www3.HP.com/PSG/board/message?board.ID=OS&message.ID=625&query.ID=568781#M625
-
SPDIF out on Compaq CQ40-122AX
I have a Compaq CQ40-122AX, running VISTA home basic sp1.
There IDT High Definition Audio built in and a HDMI output. He also says that it will be an available SPDIF output using a HP/Dock. Now, I'd like to use the SPDIF output, but I am reluctant to by the docking station for £200 as advertised on amazon. In the options for the Soundsetup there is a definition available also SPDIF.
IDT HD Audio Codec driver version: 1.0.5934.0
For IDT HD Audio DEVICE driver version: 6.0.6000.16386
Only the input/output Audio/video are:
VGA
HDMI
Headphone 3.5 mm
Microphone 3.5 mm
I had a browse autour and found that some HP models spdif output available via the Jack 3.5 mm as optics, when the adapter is plugged it activates an LED inside and that it moves the optical signal to the Toslink cable.
Adapter cable and optical at Maplin
My question is, the SPDIF is accessible on my model of laptop CQ40-122AX with this configuration without the HP docking station or could there be another way? Since there is not in there, it must be possible to access it somehow, and the docking station just seems too expensive to make sense.
Look forward to hearing responses.
Message edited by Sven on 18/01/2009 05:27何思凡
Compaq CQ40-122AX, Vista Home Basic 32 bit, AMD Athlon x 2 1.9 Ghz, ATI Radeon HD3200, 1 GB of RAM,
-Each one favor Post back your results, resolved or not - LET BRAVO!No solution is presented using computers laptops, built in the ability to use SPDIF for DD and DTS streams. The only solution that I found satisfactory is the external soundcards next via a USB port.
I use the product bought in Hong Kong, works well with XP and Vista, that's what I tried ebay. The least expensive solution to the s/PDIF output, I found. It is an optical output.
-
Monitor leaving them a 2-inch screen on the right side of the computer laptop hp Compaq cq40
Original title: full screen
After that I installed Windows 7 in my hp Compaq cq40 laptop monitor leave a 2-inch screen on the right side of the screen. I have set the screen resolution, reinstalled the latest driver. but still the screen is not displayed in full screen. If I install Windows Xp, then the display is in full screen mode. How can I get a display full screen with windows 7?
Hello
I suggest you to check if the steps help.
In Windows 7, click on the F11 key at the top of your keyboard. This will make Windows return a mode full-screen.
To cancel the mode full-screen and window restoration to normal display, press the Esc (Escape) key at the top of your keyboard.
Check your graphics card catalyst Center and change the settings from there.
I also suggest you go through the help article and check that it helps.
Use and adjustment of your monitor
-
Compaq cq40 flashing led forever
Hai. My compaq cq40 is 2 years old. Now, after I connect my mobile samsung usb mode s2. My laptop freezes. I force shutdowned. Now its not not opening. NUM and caps lock led blinking forever. I tried the battery cmos ram of permutation of compensation. Removed wifi card. Nothing helped me. Plsss help me. Also tell me if there is problem in motherboardm how much does cost inr.
If the blink code blink, pause, blink, pause, which indicates that the processor has failed the POST test.
I'm afraid that this will require the processor needs to be replaced to correct the problem. I'm sorry.
You can try to contact HP to get a quote for how much it would cost to repair and compare that to the cost of having a local PC shop to be repaired.
-
Annoying green line glisten under Compaq Cq40 LCD screen
I don't know if it's because of the new BIOS I installed that caused it that I improved F.24 F.30 version and after that all of a sudden there's this green line boring glisten under my LCD... and my temp CPU reaches now to + 60 degrees Celsius, while before upgrading my CPU temp only amounts to 32 degrees Celsius.
I already flashed the BIOS F.30 and now he's back to F.24 the temp went down, but the green line which sparkle under my LCD screen is still there... I checked the new updates to the graphics card but it says that it is up-to-date. so theBIOS has nothing to do with the flickering line after all I thought that it was caused by the high temperature. Haven't bought my laptop in Singapore in February this year no problem until this one
BTW, my laptop is a Compaq CQ40 319TU with Vista Home Premium OS license.
Message edited by amps on 12/05/2009 16:09@ Topz25 I brought to the HP service center, it's a hardware problem, they replaced the LCD screen and they didn't charge me a dime no problems yet so far
-
currently I have windows vista on cq40-108tu. can I use windows 7?
currently I have windows vista on cq40-108tu. can I use windows 7? I ask because I had the problem using windows xp on this laptop. Advice of pl as soon as possible.
Hello
You should have no problem running on this laptop W7. Basically, if it can run windows Vista, it can run W7.
Use this guide to update the link below for some tips. Watch the news in the title of level 1.
Paul
-
Please help me
Hello
You have the Windows XP installation CD? Did you read that?
Kind regards.
-
How can I get my E drive working again? I inadvertently stopped a backup file and ejected from the disc without it completed stopped. Now, he does not recognize the disc. Please help me. Computer: Compaq (Desktop), Windows Vista Home Premium, Service Packs 1 and 2.
Hello
Check with the support of Compaq, their online documentation and drivers and their forums for
known issues.Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
I not create recovery disks, in fact could not create because the DVD could not be the installation program appropriate for the burn. When I realized how do it, I had already deleted the recovery partition and had lost data recovery. The name of product HP Compaq pressario C797ee, the operating system is Windows Vista Home Basic Edition. Please tell me the link where I can download the recovery disks from which any alternative appropriate.
Hello
Please use this:
http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00810334
Kind regards.
-
Compaq CQ40: CQ40 unlock password key: 80768533
Hello
I need CQ40 unlock password key: 80768533.
Thank you very much.
Hello
You can use the link below to generate the BIOS password reset key. Enter the system code stop or the serial number of the device to generate a.
Or use the code below
35640515
You can:
1. use the unlock code you generated to enter BIOS
2 disable all passwords that are enabled in the Security menu of BIOS.
3. If the request for current password - enter the unlock code
4. for the new password, simply press the ENTER key
5. repeat the same thing to check the password column.
-
I reinstalled win xp pro. When finished and restared the nic card was recognized that even if the lights are on when I joined cable ethernet an atheist. I installed the drivers but nothing has worked. Why this is happening and what can do? Thanks in advance.
You are the very welcome.
You have the small factor form (SFF) or convertible minitower (CMT)?
Electrical supplies and the form factor of the audio and video cards must be flat with low profile brackets if you have a LTS. Power supply power is also less than a SFF in a CMT.
I have a dc7800 CMT. I installed a very nice video fanless AMD Radeon 6570 1 GB card in mine and I love it.
I have installed a sound card, but I guess you could do it.
I don't know how that everything affects the audio settings in the BIOS.
Most video cards are the HDMI audio chips on board, and those disable the integrated audio system. He must therefore go back into the BIOS and enable the onboard audio setting.
It's so everyone guess what happens when you add a new sound card. It neutralizes the again integrated audio system (which would be nice in this case), it neutralizes the HDMI audio (not a problem if you never Hang PC via an HDMI cable)?
In any case, if you want a sound card, you can get a card PCI or PCIe one that there is a PCIe location in the dc7800.
If you have a Mini PC, I would not recommend add both a video card and audio, because that can overload the 240W P/S.
Paul
-
I have a laptop compaq persrio f500.
I have just dowdload updates on my computer and know it will start only works even using recovery disc, can anyone help or do you need more information? I'm buffled on it.
Hello
as it is a problem of update followed my original advice:
to update windows questions repost in the Sub forum
It covers the issues for XP, Vista and Windows 7 update problems
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
-
Hello
I have problem with my laptop, I try to open the wireless button but it is impossible to open the fixed red light
Help, please
Kind regards
Poper
Hello
Try the following.
Open windows control panel, open programs and features, right click on the entry for HP Wireless Assistant and select uninstall.
When this has completed, restart the laptop.
When windows has reloaded, download and reinstall HP Wireless Assistant from the link below.
http://ftp.HP.com/pub/SoftPaq/sp44501-45000/sp44700.exe
When the installation is complete, restart the laptop.
When windows rebooted, open the HP wireless Assistant, click the properties button, enter a tick against "Independent controls for wireless devices installed" and then click on the button "turn on all.
Kind regards
DP - K
-
I have a laptop Compaq CQ62 visitors who present a problem of power...
I bought two taken DC-in harness and tried both. No of them light up (the plug with the led on this issue), or make one of them turn on the laptop the battery. I also tried another adapter HP power as a generic, nor of what works with any of the 3 DC-in Sockets I have identical.
Is the light on the Jack supposed to light up under same voltage if not dragged into the motherboard? (still, I looked for when both connected and disconnected). Is there another type of problem that caused the same issue?
My client is the chomping little to have his machine backwards. Unfortunately, he discovered this problem just three days after the expiration of the warranty.
Well, no one ever gives the congratulations for the bad news, but obviously you have a very bad motherboard here. You've done everything you can with replacement power. Yes, if the motherboard is good, you should get the blue light when you plug the adapter into an outlet that is correctly connected to the card. If you do not, there is a power outage on the set. I'm sorry.
Maybe you are looking for
-
Nexus10 version does not support pdf files in the web site.
I have a new Nexus 10 and installed Firefox and the Epson Print software. When I go to the bath of Rockville and center of fitness, full screen, it will show me a button on the right side hourly. Click on that to start a download (it should just show
-
Why a case without a title opens whenever I start Firefox?
even if I delete the folder without a title from the office, he appears again when I open or reopen FireFox How can I prevent this keep happening?
-
My laptop has just changed to the 8.1 now he tells me to copy my documents from 8 to 8.1, and then delete windows.old. I can't find a way to do it. Someone who can help?
-
Get an overview of frameworks for display not TC
Hi guysI started a new project, and it is only showing images in the preview, not the timecode. I can't seem to find an option to change when I right click on either the frames in the preview window or in the sequence settings.I know I'm missing the
-
HP update conditions print shortcuts
Hi all I was wondering if anyone knows what conditions/triggers a shortcut to print to be added or removed on the client computer s/thin clients after have been modified on the print server. Seem to have a few shortcuts to hang out on customers after