I have a HP G62 with Win 7, takes about 10 minutes to start,

Similar Questions

• Problem with Windows XP takes a long time to start

  Hello, I am running Windows xp3 House. I have a problem with my firewall loading Windows. It takes about 2 minutes to load and it is that nothing works (Avira antivirus, Lynksys wireless monitor, etc.) until it starts. Sometimes it loads immediately, and then it's not? Weird. In a search, I found this, http://support.microsoft.com/kb/823612 I ran it.

  He stopped and not responding so I had to turn it off and restart it manually. When I did I got a pop up telling me to activate my Windows, 3 days to activate. I did nothing to mess with windows, it has been installed on my pc when I bought it used and I have no cd or manual as I assume that it is installed at the factory. I know not where the i386 file is and have never been able to actually identify because I'm familiar with it. If my pc becomes unusable because of that I won't be able to use it and I don't know what to do. I did a system restore and it did not work. How to activate Windows if I must / I have to? How can I stop it? I don't know what to do and I need help. Thank you
  Dell Computer Corporation Dimension 4600
  Windows XP Edition Service Pack 3 family
  AVIRA Desktop Version 12.3.0.15
  Linksys Wireless-G PCI adapt
  Piriform Ltd - CCleaner Version 3, 20, 0, 1750
  SUPERAntiSpyware Version 5,
  GlarySoft Ltd. - Glary Utilities Version 2.46
  Malwarebytes Anti - Malware Version 1.60.0080

  GlarySoft Ltd. - Glary Utilities Version 2.46

  It is quite possible that all your problems are due to this dangerous program!

  Of course, any software can have a phenomenon of chance but, I have been using Glary Utilities for years and have never had a single problem.

  To the OP

  Malwarebytes Anti - Malware Version 1.60.0080

  I guess you use Malwarebytes as a scanner at the request since the version you list is obsolete. There are several malware that can cause false activation. My advice to you is first, make sure your computer is not infected. To do this you must first update Malwarebytes and run a full scan. Once that is completed and you have deleted everything which, on the contrary, that was detected you should do the same with SuperAntispyware. View your results.

  On another note, by the unlikely chance, you have the professional version of Malwarebytes and SuperAntispyware know you can't run both at the same time by using the real-time protection. As long as you use one of them as an on-demand scanner, you're ok.

• Satellite L500: Revovery Vista needs more than 8 - Win 7 takes about 10 h

  Hello

  in my Toshiba Satellite L500 with Vista 64 bit after bad start has not started.
  I try to choose recovery, but his departure +/-7 h and nothing. I try to install win 7, but it takes about 10 hours.

  Then W7 starting about 40 minutes.
  I have no idea what may be wrong.

  Thanks for help

  Maybe the HARD disk works bad 40 min to start system is certainly too long.
  Try to replace the HARD drive and reinstall the system.

  You know how to replace the HARD drive?
  If this is not the case, check this box:
  [Satellite L500 HDD replacement | http://aps2.toshiba-tro.de/kb0/CRU0B03210000R01.htm]

  You will need a common HARD SATA 2.5 disk. Its regardless of what rates would support the HARD drive: the 5200 rpm or 7200 RPM is good.

• I have a gateway laptop with microsoft 1989 solo and it does not start

  We have an old laptop and it won't go past the security settings and etc. Now it is stuck and it will say only operating system not found. How to place this at the start of the system or at least go beyond that?

  Looks like you'll have to reinstall windows 98.  There was nothing called windows 1989.  I don't even think, it would be interesting to try to reinstall it, but if you still need this computer, you will need to install readers.

• I have a dell xps with vista and get the error "unable to start windows.

  I can then choose the launch startup repair or start windows normally.  as soon as I clicked launch startup repair, he says that it is not able to PC repair.  I tried to enter safe mode, it restarts, flashes a blue screen and takes me to start the reboot system again.  I tried to run a recovery from a previous version of my sw windows (via the options in advance in the Startup Repair menu), but this does not solve the problem of boot loop.  I can get to a c prompt, but that's all.  I prefer not to use the dell factory image restore and losing all my files.

  today

  Run dell diagnostics

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_A9E3A15597A04AFBB02EE16785D39C5C&isLegacy=true

  Data recovery

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method 3 depends on your hardware in the computer that failed

• After pressing the button my XP sent me a screen with a long message about how he will start not harnessed. After that, it switches between this page and windows logo screen and no command works.

  This message continues to say that a change in software or hardware may have caused this yet, none has been done.   I had problems with registry and for two weeks failed to update norton antivirus protection after repeated due to the delay of message attempts. This has happened in the two weeks of this current problem. Very reluctant to spend more money on it by taking it to a professional, because it has been a problem since I bought it in 08. Any help will be appreciated.

  This message continues to say that a change in software or hardware may have caused this yet, none has been done.   I had problems with registry and for two weeks failed to update norton antivirus protection after repeated due to the delay of message attempts. This has happened in the two weeks of this current problem. Very reluctant to spend more money on it by taking it to a professional, because it has been a problem since I bought it in 08. Any help will be appreciated.

  Hi Gary. Is the message that you receive "Windows did not start successfully, a recent hardware change might have caused this?

  When you see this message you should be in the Advanced Options menu that is in Safe Mode, Mode safe mode with networking, last known good configuration ect... Using the top and the arrow keys on your keyboard scrolling to the last known good configuration work and then press ENTER. Let the computer ample time to start. If she does not always load windows restarts the computer. When the Advanced menu Options scroll mode safe mode with command prompt and press ENTER. Again, give time for windows to load. Command prompt window once charged will appear. Type or copy and paste the following command, and then press ENTER. Follow the prompts to perform a system restore.

  %SystemRoot%\System32\restore\rstrui.exe > press ENTER after you type or paste the command

• HP Pavilion dv9548us with Win 7 Home Premium 64-bit. I have HP Cool wInstall sense 2.0

  I have HP Pavilion dv9548us with Win 7 Home Premium 64-bit. I tried to install HP Cool feeling 2.0 but the installation was completed with error massage 'there is a problem with this Windows Installer package... "The same problem with Cool sense 2.1. Please help me solve this problem.

  Thank you.

  Hello

  What follows is certainly not what you wanted to hear, but it is frank and honest.

  There is no support for Windows 7 on your laptop. If you were able to get to the top and running, so you were lucky.

  The only provided HP drivers and applications that are available for your laptop are for Windows 2000, Windows XP and Windows Vista.

  You can try to install the Coolsense driver in compatibility mode, but there is absolutely no guarantee that it will work.

  Just as it says on the download page of Coolsense, "this feature is available on mobile phones supported running a supported operating system." Unfortunately, your laptop is not grave in either categeory.

  Best regards

  ERICO

• T61 with Win 7 RTM will not sleep on the current, will sleep on battery

  You wanted to start a new thread on this since the similar to the previous thread presents the beta version of Windows 7 and other issues while I and at least one other people have this same problem with Win 7 RTM.

  My T61 (8891-CTO) won't go to sleep / suspend when it is plugged into the current running Win 7 RTM and the current drivers Win 7 Beta.   It will be put into hibernation on current alternative.  He'll sleep / suspend very well when it's on battery.

  When the current alternative, the display dims when I try to sleep, but it will never actually suspend.   Move the rear mouse lights up the screen and gives the Windows login screen.

  Like everything else works very well and sleep works on battery but not AC, I have to assume that it is a driver problem.

  Any help appreciated.

  Thank you

  Michael

  I realized what was causing the problem on my system, so maybe this will help someone else.

  The Windows Media Player Network Sharing Service prevented my T61 to sleep.  I stopped and disabled this service.  Sleep works fine now.

• Custom built computer with windows 7 takes 20 minutes to boot to the desktop

  Hello
  I have a computer with windows 7 32-bit custom installed on the computer. It worked fine last year, lately I am facing a problem with my system. Computer freezes on the windows logo and takes like 20 minutes to start on the screen. After that it starts on the desktop, it does not recognize my DVD player. I tried in safe mode and it freezes on the ClassPNP.sys driver. I have remove the connection from DVD player and the computer absolutely perfect without any probs. I replaced the readers of DVD and also the SATA cable and checked and still find the same problem. Please suggest me as to what can be done to solve this problem.

  Hello Sikanderkhn04,

  Have you tried Microsoft FixIt for problems of CD/DVD?
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Let us know if that helps.

  Marilyn

• Sync Palm with Outlook 2007 takes 10 minutes

  When I sync my palm Centro works (finally!), but it takes about 10 minutes to synchronize everything.  The e-mail and the information I have is on the MS Exchange Server, but I was able to sync this perfectly well with my office (also on the Exchange Server), but not with my new laptop.  It only takes 20 seconds to synchronize my Palm when I don't synchronize calendar or contacts.  I will not sync any message.  Any idea?  Thank you!!!

  Well I have seen people for an exchange account sync and do not have this problem. So I would say that you talk to your IT and see if the data are correct in outlook and Exchange. What is hotsync is to see something and in regard to 'confuse' however to cross data. Or you can remove the account turned off the PC create new impetus of Outlook profile data from the device to the PC and reconfigure the Exchange to use only the account e-mail (if possible)

  If you want we can install a different profile for your outlook contacts and calendar, so it does not synchronize the Exchange. But I would still recommend that you talk to your TI and see if they can do that anything first. They can solve this problem and keep everything in the outlook profile even if you do not have to switch back.

  Message relates to: Palm Z22

• Satellite Pro L100: USB2 drivers do not have compatibility with Win XP

  SAT Pro L100 - I loaded the USB 2 drivers received using a prolific USB to Serial Comm Port (Sunix - UTS1009B) a single port USB to serial port cable.

  In each instance of loading the drivers message appears "did not the Windows Logo test for compatibility with Win XP. If continue or stop, drivers do not work.

  Seems as if there is a problem loading the USB 2 drivers. need assistance?

  Expensive branded

  That s nothing unusual.
  Many 3rd party drivers have not been tested by Microsoft and the message appears so that the pilot didn't make the Windows logo test for compatibility with Win XP!

  But if you use a driver that was designed for Win XP, you just continue and finish the installation.

  So, don t worry not and follow these steps!

  Best regards

• I always have an Aspire One D250 series laptop with Win XP. All updated to windows 7?

  This Aspire One still works under Windows XP and I want to update at least to windows 7.  I have a CD with Win 7, but without a CD player on this model, I'm not sure how to update.  Win 10 work on this model?

  You can create a USB bootable for a downloadable iso file from Microsoft Setup disk. However, you will probably be satisfied with performance of slow your system on Win7 or Win10.

  Jack E/NJ

• I have a HP 3970 scanner that does not work with Win 7.

  My new computer came with win 7 is installed.  I have a HP 3970 flatbed scanner

  It will not work with win 7.  Before that I had win xp and the scanner worked fine.

  How can I solve this problem?

  Hello

  It probably won't work because they don't have windows 7 drivers written for her by HP

  HP has written drivers for their products non-microsoft

  read the information about the available drivers below

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=298549&TaskID=135&prodTypeId=15179&prodSeriesId=298547&submit.y=1&submit.x=6&lang=en&cc=us

  You can try the vista drivers or contact HP or buy a new scanner

• new computer with win 7 pro when it is connected to a Flash drive or external hard drive poster, you have currently not authorized to access this folder or location is not available

  There are now 4 computers in front of me.

  Two are laptops 17 inch hp (consumer)

  Two are workstations mobile hp 17 inch (company)

  On the consumer books, I can view the files on my external hard drive 1 to and 1 GB player.

  On the company workstation (mobile), I'm not able to view the files on the hard drive or flash drive.

  I need your help so that I can save files from the internal hard drive of the mobile platform of book z hard disk external.  And I need to be able to reconnect the external drives and readers to the Zbook mobile workstation to transfer files to transfer flash.

  These are the pop ups that appear for each when displaying of readers by opening my computer:

  When left click hard disk drive a pop up appears with the title bar: location is not available.

  H:\ is not accessible.

  Access is denied.

  Make a right click on the hard drive allows FreeAgent GoFlex drive opening (h :)) properties)

  The tabs are ReadyBoost, previous Versions, Quota, customize, general, tools, hardware, sharing, security

  By clicking on security of advances and then permissions then continue and then change my name owner or administrator... both methods result in the same access denied result once again.

  I came across this http://technet.microsoft.com/en-us/library/00d04415-2b2f-422c-b70e-b18ff918c281 is this something I need to study and learn before I am able to connect and use an external drive or flash?  Or is there another problem?  If the answer is in this link, do I have to put emphasis on and why wasn't windows 7 configured so that it is easy to use external drives as in win xp and win 8?  Are all usb ports do not or all drivers of failing or is it a software problem all?

  I was not able by trial and error to display all files on any hard drive or external flash on the two books of z of mobile workstation.

  Then I went to the flash drive.

  Left click on the flash drive produces a pop-up with title bar G:\

  You don't have permission to access this folder.

  Click on continue to get permanent access to this folder.

  After clicking on continue it opens another pop-up with title bar G:\

  You have been denied permission to access this folder.

  To access this folder, you will need to use the Security tab.

  When clicking on the Security tab he opens a new pop with the title bar: removable disk (g) properties

  The tabs are general, tools, hardware, sharing, ReadyBoost, customize

  He did not indicate what to do next.

  Summary:

  Two new computers hp zbook stations mobile work with win 7 pro

  Or computers with their multiple ports usb allows to access my external hard drive or flash drive.

  The external hard disk and flash dirve each work very well with the consumer portable computers hp with winning 8 and 8.1 of win and have worked with computers with win xp.

  How can I get the Replicator hp z book with win 7 pro for usb drives work with external hard drives or external flash drives?

  I have so far done the following:

  (1) run administrative guest with sfc/scannow and it found no violations of integrity

  (2) ran microsoft fixit will be all available Parameters which automatically checked and corrected each book workstation z mobile http://support.microsoft.com/mats/windows_file_and_folder_diag/

  (3) contacted HP support

  (4) checked for malware using microsoft security essentials, malwarebytes and spybot on each mobile workstation

  (5) updated drivers using HP support assistant on each computer

  (6) windows update the device HP support assistant on each computer

  How do two new computers with win 7 pro can be connected to external drives that allow to view the files as they do with win xp and win 8 automatically?

  How can I access my files on the external hard disk and flash the mobile workstation book z?

  The specifications for the mobile workstation of zbook are:

  Operating system: Windows 7 Professional 64-bit Service Pack 1

  Microprocessor: Intel core i7-4800MQ CPU @ 2.7 GHz

  Moemory system: 16 GB of memory on 2 1600 MHz dimm

  Graphics device 1: Nvidia Quadro K3100M

  Graphics device 2: Intel HD 4600 graphics card

  Hard drive 1: SCSI Disk Device

  C: 683.42 (613,62 free go-go)

  D: 12.21 GB (1,3 GB free)

  E: 1.99 GB (1.97 GB free)

  The hard drive is a seagate 1 TB drive that works very well

  The flash drive is a 1 GB drive which works very well

  This problem has been resolved.

  Right-click all methods have not access external external hard drives and flash drives.

  Sharing, permissions, ownership, administrative changes, all method all failed.

  This problem has been resolved by higher HP product support.  Other levels of support were not able to diagnose the problem or fix.

  The problem has been resolved by:

  (1) determine that he was not a NTFS problem

  (2) using the msconfig to isolate a single service

  When the unique service has been disabled the files on any external drives have been available.

  The service of the problem was the HP Client Security.

  This HP Client Security in its default value is set to deny access.

  Then right-click on the drive and change the permissions, ownership, to administrators, using everyone etc. will fail because they are all trumped by the HP Client Security that is set by default to deny access.

  When that client security is changed the drives become available.  It is not information about this when using the computer and this can be learned by trial and error.

  I hope this helps all those who have z book 17 mobile workstations or HP computers that are equipped with client security.

• I have a laptop of gigabyte with win 7 home premume .it cant factory restore. I tried restoer in Control Panel and the recovery. but it is imposible.

  I have a laptop of gigabyte with win 7 home premume .it cant factory restore. I tried restoer in Control Panel and the recovery. but it is imposible.

  The control panel is not where you go to restore factory settings.  You should consult your computer user guide because the procedure is different for each computer brand and model.

  Good luck.