I have a hp m175nw printer. email prints from my iphone, but the image does not work
M175nw printer. email prints from my iphone, but the image does not work
If the DPI (dots per inch) is less than 100, the printer will not print the photo because it would be too low in quality. Draw the image on the computer, then right-click on it and click Properties, check the horizontal and vertical dpi and see if these figures are less than 100. Have you tried to connect the iPhone to the same network as the printer and try to AirPrint peak? AirPrint road doesn't have the same requirements on IPR as the ePrint.
Tags: HP Printers
Similar Questions
-
I have rebuilt my laptop Gateway MX6625, did not drive recovery, is went to the gateway web site, all the drivers have worked except the multimedia sound. The gateway was no help, they told her, but the there does not work
Hello JesusVigo,
Thank you for visiting the Microsoft answers community.
Have you tried to use the disk of Windows XP, or Windows Update running default drivers to search for best driver for your sound card?
Also, I found only 1 driver on your system gateway Web site is located here.
Hope this helps Chris.H
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
When I print a document the header and the foot seem to print but the body does not work.
I tried all the troubleshooting patches. I downloaded the new drivers. I have a temporary icon on my desk top that
I downloaded to fix my printer. Now it prints; but the parts of the document are not printed. It doesn't look like the header and the footer print but not the body.
It is corrected - I put two new cartridges and it works very well.
-
Hey @Manu37520,
Welcome to the Forums of HP Support!
I understand that you have some problems with the scanning of your PSC 2210 all-in-one printer to your PC for Windows 10. The printer has no drivers for Windows 10. You will need to use a computer with an operating system prior to analyze.
Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.
-
ImageClass MF4350d. printer works well, but the scanner does not work.
Canon Toolbox4.9 cannot connect it. Each time, I followed the instructions and put back driver and Toolbox (in the process, I have to restart my computer twice), it works for a while. But when I restart my computer once more, no link once again, and I need to uninstall and install all driver and toolbox4.9 again to make it work temperarily.
I use windows 10.
Thank you
This simple fix I found online worked for me:
Start > in the Run dialog box type. Services.msc
Scroll down to Windows Image Acquisition (WIA)
Right click, select Properties
Verify that the startup type is set to automatic
Click the journal tab of
Make sure that Local System account and allow service to interact with desktop is activated. Hit apply.
Click on recovery... Click on the window next to the first failure, scroll to restart the Service. Hit apply.
As a MF Toolbox work and stay working even after a reboot. Only problem is Windows Fax Scan no longer works, but I can't use MF Toolbox.
I hope that helps!
-
For example, I went to the site of Netflix (which I am registered on) and immediately I get a screen that asks me to enable cookies and gives me links to instructions on how to enable cookies for different operating systems.
Always good to start with a fresh reboot with Windows XP, if a question just happens.
Check your security software settings, you can block at this level, firewalls and modules FF.
(1) FF settings: tools, Options, Privacy tab change, keep until: ask me every time, click OK at the bottom of the box. Then try to go to NetFlix, if you're not invited on the cookies, they don't get FF, get back to your other software security settings and modules of the FF.
https://support.Mozilla.com/media/uploads/images/2011-03-13-10-18-14-e458fa.PNG
(2) next FF settings: tools, Options, privacy, Exception button tab, add the web address of Netflix, and click allow, ALSO check all the parameters of BLOCK. Click the close button, ok button and test the results.
https://support.Mozilla.com/media/uploads/images/2011-03-13-10-18-05-ed2938.PNG
(3) following FF settings: tools, Options, Security tab, click on the Exceptions button, add the web address of Netflix and click allow. Click the close button, OK button and test the results.
-
do I have wacom tablet or other brand draw on my pc? the mouse does not work.
been trying to use the paint on my computer Windows vista, Home Premium edition, but as you know drawings do not well: irregular line, colors overshot, etc., honestly speaking, I need to get the sometype of wacom tablet or other brands that blow my mind early, you could send thoughts on this subject to me, evil go to "The Art Institute this Summer" I want to just be prepared. Thanks for help past and keep strong! PFC Brian Noble, U.S.Army veteran
Hello
· What is the problem with the mouse?
· What is the mouse works on another application?
· What is the number and model of the mouse?
· When did it stop working?
To understand more about paint used in Windows Vista, you can consult the following link:
http://Windows.Microsoft.com/en-us/Windows-Vista/using-paint
-
Hi, I'm new to CS6 and worked through the book of Adobe After Effects. Some of the shortcuts do not work for me, probably because I use a German keyboard. In Chapter 11, I have problems because I need to select a layer, go to a specific time and then set to the point, but the [key does not work. Does anyone know a German equivalent or another way to set the point to? Otherwise, if I look at the colored bar in the timeline representing the layer that I want to put a point, can I get the same effect by dragging the edge of the colored bar until I reached the time limit? Or that fails to preserve the relationship of all images existing keys, etc. that I have implemented for a layer in a way that the [key would be? Grateful for any advice.
Shift + o/a, o/a and so on. Also kann man mit Sttrg + shift + D die ebony einfach und den Teil parts, den man nicht parish, löschen. Ansonsten einfach evil die die Shortcuts.txt Datei deepening und oder das KeyEd Up Script dafur use squad.
Mylenium
-
I have a HP printer 6500 that do not print. It seems that the rollers do not work.
Roll the rollers, but the book does not advance in the printer.
Troubleshooting page here can help. If this does not resolve the problem that, please indicate what model of printer you have, there are a number of models Officejet 6500 with a few differences.
-
I have a form in which the text area can be developed to accept more text, but the text does not appear on the printed copy. How can I get the text to print?
Hi robinm6200,
Make sure that you have selected 'Document and annotations' under 'Comments and forms' when printing.
Kind regards
Nicos
-
HP5610 All in One Printer and for some reason any fax does not work
* - Original title - the printer does not properly
I have a HP5610 All in One Printer and for some reason any fax does not work. What could be the problem? I don't have the CD installation disc.
Hello
To provide a proper resolution, I would need more information on your side.
1. what operating system is installed?
2. don't you make changes to the computer before this problem?
We can refer to this article and check if that helps.
Unable to send or receive Fax: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01670485
You can also ask your question in the Forums of HP Support (scanning, fax and copy): http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/bd-p/Scan
Thank you.
-
What impression of recipes, photo prints, and the name, but the recipe does not print. I heard do that before, but not of Noah
Hello
OEM for the printer manufacturer is responsible for the proper functioning of the printer
and their drivers. Check with the printer manufacturer's support, their online
documentation and drivers and ask in their forums.Good luck, you need to update or reinstall the latest driver.
================================================
Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printerSolve printer problems (Vista)
http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1Solve printer problems (Vista)
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problemsSolve printer problems (Windows 7)
http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1Open the printer (Windows 7) Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-TroubleshooterDiagnose and automatically fix problems printing and printer (XP, Vista, Windows 7 &)
https://support.Microsoft.com/en-us/mats/printing_problems?WA=wsignin1.0Find the manufacturer's Web site
http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-websiteFind and install printer drivers in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers-------------------------------------------------------------------
Windows 8/8.1 - Fix printer problems
http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1Windows 8/8.1 - How to solve printing problems in Windows
http://Windows.Microsoft.com/en-us/Windows-8/How-to-solve-printing-problemsWindows 8/8.1 - install a printer
http://Windows.Microsoft.com/en-us/Windows-8/install-a-printerWindows 8/8.1 - set or change your default print
http://Windows.Microsoft.com/en-us/Windows-8/set-change-your-default-printerWindows 8/8.1 - device drivers - print & drivers
http://Windows.Microsoft.com/en-us/Windows/devices-drivers-help#hardware-drivers-help=Windows-8&V1H=win8tab3-------------------------------------------------------------------
Windows 10 - Fix printer problems<- printer="">->
http://Windows.Microsoft.com/en-us/Windows-10/fix-printer-problemsSupported Windows 10
http://Windows.Microsoft.com/en-us/Windows-10/supportI hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">-> -
Hello, anyone have any experience to try a plan after a trial, but the site is not opening after clicking on buy...
It was useful, now everything works fine!
Felsherif December 23, 2013 right answer 12:51 AM
I had a long discussion with a Support Agent and finally solved my problem in activating my root user... after a lot of trial and error/attemtpts. Here is my summary just fyi, I hope this works for you also.
I'm on MacBook Pro OS X 10.8.5.
- They had me first go to ~/Library/Applications support/Adobe/OOBE and delete the file 'opm.db '... Creative cloud question remained.
- Then they asked me to go to support/Adobe ~/Library/Applications and rename the files "AAMUpdater" and "OOBE"... and go to the library/application support/Adobe (note this is a different path) and remane the files "AAMupdater" and "AAMupadaterInventory"... question remained.
- They had me also go to my Netwrok Prefrences, Proxy server to configure, and enusre all boxes are unchecked and "use Passive FTP Mode (PASV)" also unchecked... did not help, the question remained.
- Of course they had me uninstall and then reinstall the creative cloud application, which I did (Applications > utilities > Adobe installer and run the "uninstall Creative Cloud")... but the question remianed.
- Finally, they had me to visit this page on the Apple support page, http://support.apple.com/kb/ht1528 and activated the user root for OS X Lion.
- After allowing the root user (and create a new password for it), I rebooted my Mac
- Saved in my Mac once as 'root' and connected to Adobe Creative Cloud using my usual Adobe user/email name and password.
- Go to the 'Applications' tab, and it worked perfectly!
- I disconnected the root on my Mac, then that reconnected me.
- Launched the creative application of Cloud, connected and went to 'Apps'... works great!
-
I get emails with pictures and when I send them to others. they open
their place but the images are not displayed. The photos are there when I send a
them. Thank youMake sure that your security software (antivirus) is not blocking attachments.
-
My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do? Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.
When connected to the charger make a forced reboot: hold the home and sleep buttons, wait for the Apple logo, release the buttons. May take a few tries.
Maybe you are looking for
-
My Mac Mini (end of 2012) will support a MHL HDMI 4 k monitor?
Hi all.. I'm a little confused about two things. I'm in the market for a new monitor and thought getting a screen of 4K, but I came across 2 questions... 1 - is my Mac Mini w / 1.5 GB HD4000 support a MHL HDMI monitor? (I know that my current monito
-
How change/reset the folder owner?
I have two folders and 1 file at the root of my part with the owner/group value "0-98. All others are "65534 65534". I am able to access the files without problem, but I want to delete them, and who does not. How can I reset the owner (or remove them
-
Original title: google update on startup, I get C:\Users\Jerrold\AppData\Local\Google\update\1.3.21.65\goopdata. DLL is not designed to run on Windows or commercial error what should I do to correct this? And what is the update anyway?
-
Problems of browser to blackBerry Smartphones. Missing service book.
Hello! I have a blackberry storm 9500 from the Germany. I am located in Yerevan (Armenia). It seems that there are several problems with my smartphone: 1. when I try to connect to the browser, the following message appears: «your device has no curren
-
WMP 12 icons in the area of reading in the library view controls
The other day, during playback of an MP3 file in particular, at one point a strange icon appeared to the right of the oval containing playback controls. He disappeared very quickly. I tried to find a reference showing all the icons that may appear in