I have a HP officejet V40 and have lost the driver cd could you let me know an address where I can download a free driver for this please? thanks___Andydeee __many.,.

Similar Questions

• I get the blue screen in the LR development mode, even though I have updated the driver for the graphics card on this new laptop. It's an AMD Radeon R5 M335 4 GB memory DDR3, core i7 6th gen processor. What should do?

  Hi guys, I get the blue screen in the LR development mode, even though I have updated the driver for the graphics card on this new laptop. It's an AMD Radeon R5 M335 4 GB memory DDR3, core i7 6th gen processor. What should do? Thank you

  This Eizo has a normal resolution of 1920 x 1200 pixels. I expect not to see a lot of benefits of using the GPU. You really see the advantage to screens that are at least 4K (3840 x 2160 pixels) or more. On small screens, you can see some benefits with smoother updates if you ONLY use the base sliders to develop. If you use brushes, turning on the GPU can actually slow you down a bit. In most cases, loading images in develop is also slower when you activated! There are a few illustrative notes to an engineer from Adobe that you can read here: notes for Lightroom CC GPU (2015) in order to better understand what is happening. Currently, in most cases, I recommend leaving off the coast. I think that Adobe is trying to improve and have more cards supported, but it is not yet completely there.

• Add/Remove components error and DVD driver error: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Original title: Add/Remove components error and DVD driver error

  Yesterday, I removed several components of windows to attempt to clean my cpu. After the reboot, I noticed that my DVD drive disappeared. I tried to update the driver but told me I have the most updated version, I uninstalled and reinstalled the drive, but I still get the same error. Under Driver Details, it shows that I have a lot of drivers for my Phillips DVD player. However, the status of the device is the following: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. I've done the troubleshooting, and the two options has not fixed the problem.

  Then I tried to add windows components that I removed, thinking maybe that was the problem. However, when I try to add them, I get an error message that says: 'Setup cannot copy the file zClientm.ex_' it shows the location of this file as being in windows/i386, and of course, the file is located in this folder. So when I go to browse to locate the file, I find and click on it to open it, but I keep getting the same error message that the file is not found and Setup cannot continue.

  I realize that this problem seems very rare and weird, but any help at all would be appreciated. Thank you.

  Hello
   
   
  Code 39: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Explanation of error codes generated by the Device Manager in Windows XP Professional http://support.Microsoft.com/kb/310123

   

   

  Method 1.
  Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then automatically solves the problems that he finds and offers additional resources if the problem is not resolved. Click run now in the article below.

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

   

   

  Method 2.
  Also, try the methods listed in the section below and check.
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 7 will not recognize that I have installed the driver for my MICROSOFT xbox wireless gaming receiver

  Hello
  first of all, let me say thanks for reading this e-mail message. I have a problem with windows 7 64 bit recognizing that I have a driver installed on my compuetr, I installed the tha tcame with the cd software and that did not work, it appears as an unknown device in devices and printers, I tried to download the driver for windows 7 64 bit on the microsoft site after uninstalling CD. then I have insalled Traore, one on the microsoft site and it says the same thing, I can't then turned to devices and printers and he said that this device does not a driver installed. I tried so many times with the same results. I restored the system time ind time new and re-installed windows 7 two times and still the same problem, I've done alll I can again and again until im just sitting at the computer that I'm beyond angry, now just totally lost it please can you help as I think I've tried everything

  Thank you for the hope

  creepyz

  Hi creepyz,

  Please see things to try when the game Microsoft Xbox wireless receiver is not detected in Windows PC.

  1. check that the accessory is an accessory wireless Xbox 360 officially licensed.

  2. examine or replace the batteries to make sure that you loaded the batteries of the accessory wireless Xbox 360.

  3. move the receiver away from other devices that may interfere with the communication between the receiver and the accessory wireless Xbox 360 Wireless.

  4. Note: devices such as wireless routers, phones wireless and microwave ovens can generate Wireless interference.

  5. If the light on the receiver does not light, check the USB connection between the receiver and your computer. Make sure that the receiver is connected to a powered USB 2.0 port.

  6. If you use a wireless keyboard or mouse, disconnect the keyboard or the mouse, then reconnect the wireless gaming receiver. Then try reconnecting your device wireless Xbox 360 to the PC.

  See please visit the link below which deals with this subject.

  http://support.Xbox.com/support/en/us/Xbox360/KB.aspx?ID=933709&lcid=1033&category=hardware

  Please check How to configure and use your Xbox 360 Wireless Gaming receiver for Windows, for more help, check out the following links below.

  ·         http://support.Xbox.com/support/en/us/NXE/contactus.aspx Support for Xbox

  ·         http://forums.Xbox.com/ Forums

  Concerning

  Arona - Microsoft technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• HP Pavilion a1118x/PX757AA-ABA: I have upgraded to Win 7 64 but lost the driver for the Ethernet connection and unable to connect to the internet

  I can't connect to the Internet, because none of the network drivers are showing. I'll use this for Microsoft Flight Simulator so what card Ethernet buy to install or usb wireless driver do I need to buy to install. The current Ethernet is built-in to the motherboard. The number on the Ethernet Jack real housing is p53-153-11z9, and it's a salmon motherboard.

  Hello:

  I compressed upwards and tied the ethernet driver that shows support for the hardware ID you have validated, below.

  You will need to manually install the driver as follows...

  Download and uncompress the file that I attached to his record.  Do nothing with the files in the folder.

  Go to Device Manager and click on the ethernet controller requiring driver.

  Click on the driver tab, click on set to update driver.

  Select her browse my computer for driver software option and navigate to the folder you unzipped.

  Make sure that the include subfolders is selected, and I hope that the driver will be installed.

  Then restart the PC and see if you have network connectivity.

• Code 39. Could not load the driver for this hardware device. USB, Audio and Ethernet. Œuvres's driver CD.

  Hello this is the first time I posted about people here so sorry if I get this thread a bit messed up, but to cut a long story short, I plugged in my USB iPhone and then the iPhone has crashed, so I had to uninstall iTunes, to complete the unistallation I had to reboot my computer on that next time that my computer started. My Usb drivers, Audio and Ethernet were no longer works. I tried a lot of thing to solve this problem, I downloaded the drivers and has moved across on a dvd and has not worked, I reinstalled the drivers, didn't work and I also moved my ram in a different solt because a friend told me that this could work. It did not help. I took a screenshot of the problem and transferred to it via CD.

  http://i30.Tinypic.com/ae32vk.PNG

  http://I27.Tinypic.com/2w4jy14.PNG

  When I put my driver of motherboard of the computer disc he also says 'Don't detect any good point. "

  I don't know what to do with this issue but it's really bugging me, any help would be Grateful.

  Thank you.

  I am currently using a:

  Card mother ASRock G31M-GS

  ATI 5970 Gtx graphics card

  On board sound

  2 GB ram cheap

  Windows 7 64 bit

  I just noticed that I posted this in the section wronf my bad for it.

  Zippers, I mentioned would be just compressed the executibles (EXE) versions. If you
  has ran versions EXE of the drivers for the NETWORK card and WiFi and were there any error messages?

  Download the Intel chipset drivers and install them - restart and then try the others.

  If no joy repeat the repair facility.

  Drivers for your computer would come from the machine system and various device manufacturers
  as Intel.

  You need to check on the site of the manufacturer of the system for your model, so you can get the basic
  drivers for the system. Be sure to get and install the Intel drivers for your chipset first.

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• where I can download windows 7 and serial key what would you say?

  Hello

  because of the problem of gel, a computer expert suggest me format all the drivers and reinstall the window.

  now I can't take the image backup or windows because of the frost. my pc is not working now.

  where I can download windows 7 and serial key what would you say?

  Please please help me in this regard

  Thank you & best regards

  When you request support, please provide the number of name and/or product of comprehensive model of the HP computer in question. HP/Compaq made thousands of computer models which are all different. Without this information, it can be difficult, even impossible to help you solve your problem.

  You can download a (ISO) image of Windows 7 SP1 by using the links provided in this HP forum thread titled "How to install Windows 7 without the disc". During the installation of Windows 7 you must use the product key of Windows 7 from the Microsoft COA on the underside of your computer. If your computer came with a different operating system, you will need to purchase a copy of Windows 7 with a COA and a key valid unused product.

  Please send BRAVO

• I have an officejet j4580 all-in-one and I lost the cd, how do I set up my laptop?

  I have an officejet j4580 all-in-one and I lost the cd, how do I set up my laptop?

  Hey mbuyi

  Please visit the link below to download the driver full features

  HP Officejet J4580 all-in-One Printer Drivers

• want to set up Analytics for my Officejet, but have lost the CD with the printing software

  I have the OfficeJet 6500 E709n all-in-one, and I want to set up the function of scan on my Macbook Pro.  The printer function works very well from the laptop.  I have lost the CD with the software on it.  What are my options?  Thank you.

  Hi Dannyp43,

  You can download the software and drivers for your HP.com E709n.

  Please followthis link to access the download page. Click on the '+' next to the driver, then click on the link for your version of Mac OS X. you have the following options to choose:

  -How to install your product in 10.7.x (Lion) - this is a document that shows you how to install 10.7

  -Full Feature software and driver for® 10.6 (Snow Leopard) - after clicking this link, there will be a download button.

  -Full Feature software and driver (Universal) for 10.4 and 10.5 - after you have clicked on this link, there will be a download button.

  Once you have downloaded the software, double-click on the .dmg (download it), and then in the window that opens, double-click the HP Installer.

  If you install USB, connect the cable before beginning installation.

  If wireless, connect the printer to the network (using the front panel) before installing - this is not necessary, it just makes go more smoothly. You can also configure the wireless installation using wireless USB installation.

  Hope this helps

• All IT gurus out there who know Firefox... have lost the passwords saved when FF created a new profile and delete old files key3.dbf and logins.json profile.

  All IT gurus out there who know Firefox... have lost the passwords saved when FF created a new profile and delete old files key3.dbf and logins.json profile. Any ideas, anyone?

  So it's not a logins.json file?

  I see a signons3.txt file and a file signons.sqlite older, if you can try to see if you can import passwords stored in this file.

  You can force Firefox to re-import the passwords in the file signons.sqlite and regenerate the file logins.json with the following steps:

  • reset the signon.importedFromSqlite pref on the topic: config page by default via the context menu
  • Delete the logins.json file in the closed Firefox with Firefox profile folder

  When you restart Firefox, then you should have the pref signon.importedFromSqlite with the value set to true.
  You have passwords that are imported in the password manager, unless there were errors or signons.sqlite signons3.txt.

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

  You can use this button to go to the current Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• I downloaded the latest update and have lost the kiosk application

  I downloaded iOS 9.3.1 and have lost the kiosk application that contains my subscriptions to newspapers

  Settings - general - reset - Reset homescreen layout

• Now, I have no sound on my lapt top having a media player to "check the drive for errors" and laptop have no dound I did a windows update, but no sound came through, please help me

  Now, I have no sound on my lapt top having a media player to "check the drive for errors" and laptop have no d

  the sounds I made a windows update, but no sound came through it please please help with a link to something. Re, I did check the drive for errors and still after it again all the sounds left my laptop which is a vaio song

  Thanks for any help

  Hi, Pantha9,

  What version of Windows are you using?

  Start > right click on computer and select Manage

  Select Device Manager

  Click on the + next to sound, video and game controllers

  Right-click on the driver and select uninstall

  Restart the computer and Windows will reload the driver

  New attempt of his

  Access the site of the factory and search for driver updates

• I have a custom-made computer and it says that I need the driver for my network controller

  Hello!
  I have a custom office and tab device from my Office Manager, it says that my network controller is missing from the driver. I think I might have uninstalled on accident. My hardware for this device id is pci\ven_14e4 & dev_4727 & subsys_0010128 & rev_01
  Pci\ven_14e4 & dev_4727 & subsys_00101028
  Pci\ven_14e4 & dev_4727 & cc_028000
  Pci\ven_14e4_dev_4727 & cc_0280
  Please help or at least point me in the right direction. Thank you

  My advice would be to remove the adapter and know what brand is and go to the website of support to him and to find the right driver, he needs.  There should be some kind of identification tag on.

  There are literally dozens of broadcom drivers that might be, and since you said you have a custom built PC, I got hit with a driver, and unfortunately it did not work.

  It is a part not HP so it will take some manufacturers for this driver.

• I have a Toshiba Satellite A105-S361 and I get this message: Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)

  I have a Toshiba Satellite A105-S361 and I get this message: Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)

  Hello

  I suggest to refer to this link, scroll down to error code 41 and follow the steps and check if that helps:

  http://support.Microsoft.com/kb/310123

  It will be useful.

• Failed to open all files with the extension .exe in Vista Business SP2. Dialog box appears and asks which program to use. Seems to have lost the info file assoc after virus removal.

  Failed to open all files with the extension .exe in Vista Business SP2.  Dialog box appears and asks which program to use.  Seems to have lost the info file assoc after virus removal.  Any suggestions?

  Hello

  Try the methods provided below and check if the problem persists.

  Method 1:

  Try the fix it or follow the manual for troubleshooting to solve the problem.

  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

  http://support.Microsoft.com/kb/950505

  Note:

  The link above contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  Method 2:

  Download and run Microsoft Safety Scanner and check if the problem is caused by a Virus/Malware.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx