I have a HP Photosmart C5280 of Japan... Now I'm in the Philippines...

Similar Questions

• Photosmart C5280: a component ' to ' falling apart after the paper stuck. "

  I wanted to spring 6 pages, 2 of them when printed, then a stuck. I pulled it out, but when I tried to continue printing a stuck. This time when I pulled it out (it came out softer the usually), I found a black plastic piece down on the document reader.

  Here's an album with 4 photos of this component:

  https://drive.Google.com/folderview?ID=0B0K5k8LpitTlUDVJMnZMWGlrVXM&USP=sharing

  Please can someone tell me how to put it back in its place?

  Thank you.

  Hello @DimitrisPl,

  Welcome to the Forums of HP Support!

  I understand you have problems paper jam printing of your HP Photosmart C5280 All-in-one printer and after removing a jam you found a piece of black plastic at the bottom of the printer that needs to be reinstalled. I would like to help you to solve this problem today.

  To begin, please can I you click here for the jam troubleshooting steps. Once the support document opens please run through the Solution one, two, three, Solution solution and four Solution. This includes all sub-steps under the listed Solutions. Once we have determined that no other debris or jams are stuck in the print on your printer path, we will be able to reinstall this piece you found. Now, normally parts like this are non-replaceable. Therefore, it is not supposed to get out of the printer. However, I find in your printer which parts seems to come from a sector.  In the support document, I'm going to have run through to see the Solution three: step 1. The rear access area of your printer where the paper pick roller seems to be where will this piece of black plastic.

  

  The image is under "Figure 10' in the support document. I think that you can just cut that part into its slot. Once you have reinstalled the game, please try again to print.

  Please reply to this message with the result of your troubleshooting. Good luck!

• I have a HP Photosmart C5280 printer that has a jam of transport.

  The transport on this printer C5280 is blocked.  It seems to be very close to its place natural resing, but not altogether and do not manually move in both directions.  The machine also will turn off.  I unplugged the power to judge so that he can reset and nothing changes.  Any ideas?

  Hi jimdykstra,

  I see that you are having problems with your carriage of the printer.  I'll take a look at the document below.

  Jam of transport

  Let me know how it goes.

• I have a computer with Windows XP and now they block in the monitor just to see my name and ask for the Ican t password remember

  my computer is locked

  Hello

  If you are using XP Home Edition, the built-in Administrator account probably doesn't have a defined password. You can start in safe mode, where this account will be selectable when connecting. It allows to connect and change the password of your normal connection.

  To start in safe mode, keep hitting F8 twice a second after turning on the PC until you get the start menu where safe mode is selectable by the up/down arrow keys, and then press ENTER.

  If you are using XP Professional, try to connect using the built-in Administrator account. You don't need to do it in safe mode (although you can if you wish). If your normal login screen is a display of the user symbol and hit ctrl-alt-del twice to get to login to text entry. Type administrator as the user name and try a blank password.

  See also http://support.microsoft.com/kb/321305

  Tricky

• Photosmart C5280: 5280 all-in-one printer front panel C does not

  I have a HP Photosmart C5280 All-in-one printer. I am able to print and scan through the software on my pc, but the buttons and the screen on my printer does not work. The screen is dead and nothing happens if I press the buttons. I lift the lid (the m crept about to change ink) for the printer start work before I can print. Please give advice on how I can solve this

  Welcome to the HP community @Anthony1707,

  I read your post on display problems you are facing your Photosmart C5280 and wanted to drop. My suggestion would be to try the steps that are in the article link below to see if they can help. If the problem persists, I think that somewhere there is an internal failure, and could then recommend contact HP directly to see what your next printer options. I'll leave their contact details below for you also.

  HP all-in-One, Fax and copy machine products - product HP off several times

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

  I hope this helps you!

  Contact HP:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• Jam clear carriage on my HP Photosmart C5280

  Help! Never had this happen before... I have a reading on my printer: clear carriage jam

  I have a HP Photosmart C5280

  Can someone help me. I looked inside tried to get out of the cars, but they are hit in there. Any info on how to delete it? It is greatly appreciated.

  There is a document with steps to help solve the congestion of transport in the D5280. The document can be accessed here.

  If the steps do not address the issue, then it is probably a hardware problem in the printer. If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  HP Technical Support call case form:
  http://goo.GL/w7Hgh

• When printing from the print size internet is too small - HP Photosmart C5280

  I have a HP Photosmart C5280 All-in-one printer-scanner-copier.

  My pc runs Windows7 Home Premium 6.1

  I've been printing pages of the internet ok so far.   I looked at 'Properties', but cannot see where it is a mistake.

  I'm not aware that I made no changes to my system.

  It prints my documents well, just Web pages or emails are so small that they are hard to read.

  Advice please?

  I have it discussed with my colleagues and they noted a framework in the layout of the browsers themselves.

  In IE9:

  1. Click on the Tools icon (it looks like a gear and is under the red x).
  2. Printing of highlight and a submenu will appear.
  3. Select layout on the submenu.
  4. The page Setup window will open.
  5. Make sure the shrink-to-Fit "Enable" is not checked.

  

  In Firefox:

  1. If the menu bar does not appear, right click on the top of the browser and select "Menu Bar".
  2. Click on file.
  3. Select page layout.
  4. Make sure you adjust Page Width is not checked.

  

  Who should get things to normal.  Let me know what happens.

• I'm trying to connect my photosmart 2610 to a wireless network. Following the online instructions, I have

  I'm trying to connect my photosmart 26110 printer to my wireless home network. By following the online instructions, I find when I get to the network menu on the printer, I don't have a network configuration option. So now what?

  The printer is currently connects to a PC via USB. I want wirelessy this network printer for my Mac to print to it also.

  LAN means Local Area Network.  It comes to your home network.  WAN means Wide Area Network.  This is the port to connect to your service provider, or in other words, where the Verizon's Internet connection needs to connect.  It shouldn't be to hard to get the Macbock to install the printer on the network.  The document below will guide you in the process.  Let me know what happens.

  Install the software from the product under Mac OS X for a wired network connection (Ethernet)

• I replaced all 3 colors on Photosmart Premium C309 series, now she says remove pinhead, help

  I replaced all 3 colors on Photosmart Premium C309 series, now she says remove the head of a PIN, lift the black latch? where is it?

  If the print head can be removed, it is a replaceable part. Look at the print heads where the contacts are found; There should be an end date of guarantee that there are listed. If this date is not passed back into HP Total Care and they can solve the problems it more, as they can help with the purchase of a replacement printhead. The number for U.S. and Canada customers is 800-474-6836.

• Can't print Photosmart C5280. Error "object GPCore COM has stopped working and was closed".

  I have problems printing my Photosmart C5280 All-in-one on my desktop of Windows Vista 32-bit. I felt for a few years and have only recently met this issue. A few months ago, I set up a home network so I could print from my Toshiba laptop. The printer is connected to the computer via a USB cable and the laptop is connected via a Bigpond Modem/Router which is connected to the desktop via an ethernet cable. More recently, I have also configured for my son to be able to print from his HP laptop. Initially, we were able to print from any computer. The two paltops are running Windows 7 64 bit. However, in recent weeks, we noticed that we were no longer able to print from a laptop, and a few days ago, I was unable to print from the office. When I try to print from the office, the print job seems to go to the print queue, but is then removed from the queue. I then get an error message

  "GPCore COM object has stopped working and was closed".

  
  

  This applies to all applications even the test print. I just went through the steps on the HP site, including downloading and execution of printing HP troubleshooting and doctor Scan and uninstall then reinstall the printer. I'm a bit of a novice at the side Computer Hardware and wonder if there is anyone out there who has had a similar problem and found a solution. Any thoughts would be appreciated.

  Hello MikeF48,

  Sometimes to do a simple uninstallation / reinstallation is not do the trick, and we try to remove all the software from the computer completely. Most of the drivers available at HP have a scrubber utility that removes all traces of the software on the computer and allows you to reinstall the software fresh. We should start there and see if that gets us running.

  I recommend you to do all this on the Vista machine. Once we have a working computer we can then pass from there to other laptops.

  Here are the instructions to use the tool of the scrubber. There are two sets of instructions, one for if you have installed the drivers from the HP website or if you have installed the drivers from the CD that came with your printer. Follow the instructions for your installation accordingly.

  Of the Original installation CD:
  1. Insert the CD in the drive and then cancel Setup
  2. open my computer and click right then on the CD from the drive and select open
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://get.Adobe.com/flashplayer/
  9 download drivers and full software features
  Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
  10. run the download to reinstall the printer
  
  If the software has been downloaded and extracted to your system:
  1. type % temp % in the field of race
  2. Locate and open the folder starting with 7z (example: 7zS2356)
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://get.Adobe.com/flashplayer/
  9 download drivers and full software features
  Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
  10. run the download to reinstall the printer

  After having uninstalled the software and did a reinstall of fees. Let me know if the problem is still the Outlander.

• Photosmart C5280: Photosmart C5280 All in One

  I have a new HP laptop and want to use my HP Photosmart C5280 printer all in one with her. I need to know what I should do to be able to use my C5280 with my HP laptop. I need to be able to use it with this phone, but there is not anything showing you what who or where you need to download the files, you need to be able to use the new laptop HP Photosmart C5280. My new HP laptop is a Pavilion with Windows 10 64 bit which was already about this when I bought my new laptop. Any help is greatly appreciated...

  Have you been to the HP here web site?

  http://support.HP.com/us-en/product/HP-Photosmart-C5200-all-in-one-printer-series/3204462/model/3204463/drivers

  Everything that you need.

• Rollers which collects the paper in my Photosmart C5280 printer make any movement.

  I have cleaned the rollers, checked the settings, changed the paper, dusted off the printer, but rolls that are supposed for the paper do not move, and the printer gives me a message 'Out of Paper' and do not print.  Any suggestions?  He is an all-in one Photosmart C5280, running on Windows XP, directly connected to the computer.

  If the entry of paper rolls do not move, then it is possible there is something stuck in it or the sensors that control are having a problem.

  * I start by remove all paper from the paper tray and check at the front and the back of the printer to make sure nothing is caught in the rollers

  * Hard Reset the printer by unplugging the unit while it is turned on, wait 30 seconds and plug it back to.

  Thus, there is a document provided by HP with the steps to resolve when a printer does not have paper in the unit.  The document can be accessed here.

  I hope this helps.

• Broken in HP Photosmart C5280 plastic gears

  I have a problem with my beloved printer) HP Photosmart C5280 broken part (10 + PC GF) and specifically small plastic gear.
  In this part got 3 speed, while broke which is in the middle and attached to a metal rod.
  Where can I find these pieces, or you can send me by mail section?
  I don't want to throw the printer because of this very little damage.

  

  Sorry to hear that your printer broke. Unfortunately these parts are not available at the part store. One possibility would be to contact the HP Support to see what deal they can offer on a new printer?

• I can't reinstall HP Photosmart C5280 AllInOne. All the drivers are up to date.

  I can't reinstall HP Photosmart C5280 AllInOne. All the drivers are up to date.

  Have you done research on HP website?

  1. http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00292078&cc=uk&lc=en&dlc=en&product=3204464&tmp_track_link=ot_search

  2. http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00027840&cc=uk&lc=en&dlc=en&product=3204464&tmp_track_link=ot_search

  From:

  http://h10025.www1.HP.com/ewfrf/wc/searchresults?tmp_product=HP+Photosmart+C5280+All-in-one+printer&product=3204464&tmp_qt=install&LC=en&DLC=en&cc=UK

• E14 ACER: EXPIRY DATE OF CARTRIDGE IN HP PHOTOSMART C5280 ALL-IN-ONE

  HOW CAN I REPLACE EXPIRED INK CARTRIDGE IN THE PRINTER ALL-IN-ONE PHOTOSMART C5280 HP?

  Hey @mmaxxor,

  Welcome to the Forums of HP Support!

  I understand that you are looking for a way to override the expiration date for all-in-one printer, HP Photosmart C5280 ink cartridge. I want to offer you information about expiration dates.

  Expiration dates can be reset on cartridges. But expired cartridges should work correctly in your HP Photosmart too long that the cartridges have been installed on your printer before expiry. If you bought new cartridges that have already expired they likely won't work in your printer and there is no replacement for that cartridges are expired. If this is the case, you may want to consider bringing back them to the store or speaking with our Technical Support phone queue to explore additional options.

  If you had a cartridge installed in your HP Photosmart camera and would use very well and at random, to get the message that the cartridge has not expired, you should be able to hit OK on this message and continue using the printer as per normal.

  For more information on the guarantee one couverture coverage for ink cartridges and printheads, please click on here.

  Please let me know if the information I have provided solves your problem. Good luck!