I have a Macbook connected via WiFi to a Canon MG7520. The destination of auto scan does not work

Similar Questions

• Cannot update apps. Impossible to reach on the adobe servers. What continues? Its bad enough I have to rent the apps now and it does not work yet. Ive turned off the firewall and my internet connection works perfectly. How to upgrade my applications?

  Cannot update apps. Impossible to reach on the adobe servers. What continues? Its bad enough I have to rent the apps now and it does not work yet. Ive turned off the firewall and my internet connection works perfectly. How to upgrade my applications?

  Hey, if the problem has finally been fixed! I thought you would like to know the solution.

  Select Preferences - network - system - advanced - DNS network - click + symbol - Type 8.8.8.8 - Ok - apply.

  That's all. Works perfectly now. Very much appreciate your help, thank you.

• OfficeJet 8500 a 910 scan does not work with my Macbook Pro Snow Leopard 10.6.8

  OfficeJet 8500 a 910 scan does not work with my Macbook Pro Snow Leopard 10.6.8.  I tried to reload of apple and HP.  My drivers and software are up to date.  I tried to scan from preview, Capture and print browser.

  It worked finally.

  Why doesn't HP have updated the drivers for a Macbook Pro 10.6.8 Snow Leopard?  I couldn't find one for 10.5 or 10.6 Leopard.  I tried everything I could find. I found a note on the edge of Disussion which suggested someone try a driver for another HP printer may be similar.  I found if I used the full program for Macbook Pro 10.6 Leopard I could scan.  The fax appeared to be installed via blue tooth.  I have not faxed anything, but it has been tested during the installation of the program.  Complete program of the HP I can't print.  I loaded via Apple an another whick of printer HP Officejet 8500 A910 allows me to print.  It is the only way that I could make use of my HP printer, scanner and fax.  Crazy, but I think it works and I can put some scans and, hopefully, fax to my Macbook Pro.  I appreciate the help.  Please encourage the HP programs and drivers for my Macbook Pro Snow Leopard 10.6.8.

• My internal camera on my MacBook at the beginning of 2008 Pro does not work

  My internal camera on my MacBook at the beginning of 2008 Pro does not work.

  One of them will solve your problem of camera:

  (1) If your Mac restart does not solve the problem,

  (2) use http://support.apple.com/kb/HT2090 from Apple.

  (BTW - troubleshooting section called an "iSight" camera.  However, after that article was published, Apple has changed the name of the built-in camera on the recent "iSight" Macs "FaceTime", then "FaceTime HD."  Whatever the name of your built-in camera, the same info and troubleshooting applies.)

  Be sure to test several Apple app (photo booth, FaceTime, iMovie, QuickTime Player, etc.) in more than one user account.  Do NOT use the 'Guest' for this test account.  If you don't have more than one user account for testing, create one now.  If you need help, how is explained in http://support.apple.com/en-us/HT201754.

  A 'Standard' user account is all you need for the tests.

  (3) If your camera will work correctly even with Apple applications, use OS X Recovery to completely reinstall your Mac OS since system recovery stored on your startup disk.  Don't bother test Skype or other 3rd party apps until you have your camera works with applications Apple.

  (4) If none of the suggestions above resolve your issue, contact Apple or one of the Apple-Authorized Service Provider to have your Mac professionally repaired. Don't forget to back up your Mac and Deauthorize iTunes before the call for tenders for the service.

  Post edited by: Jim EZ

  Mac OSX 10.11.3

• I have re-installed Windows Vista on my laptop (Dell Inspiron 1525) and now my wireless does not work.

  Hi, I have re-installed Windows Vista on my laptop (dell insparon) 1525 and now my wireless does not work. ive tried re installing driver, but it says operating system not supported. I used the disc that came with the computer of the re install and I even tried to install service pack 1. .

  original title: Wireless problems after install.

  I just tried both, the dell is one that says OS not supported"and the intel, it went very well, but my 'network controller' still have a yellow top thing in Device Manager. and I always wireless. any other ideas? Thank you for the help

  Question...  You have whatever it is listed in the "Network adapters" section of "Device Manager" now?

  While ensuring that the exclamation point is not for your wired network device (plausible) or bluetooth (plausible) and you just need to configure your wireless network to connect to * your * wireless network now.

  You may have to contact Dell to see why none of their drivers receive your wireless device works on the original operating system, what they included.  This could be a hardware problem PURE.

• I have Photoshop CS5 extended version 12.04 with camera RAW version 6.7. It does not work with files. NAVE. Help me please

  I have Photoshop CS5 extended version 12.04 with camera RAW version 6.7. It does not work with files. NAVE generated by NIKON 610. What can I do?

  Hi danielem,

  Need you minimum Photoshop CS6 & Camera Raw version 8.3 use of Nikon 610 RAW files.

  

  see the related link: supported by Adobe Camera Raw devices

  However, if you cannot upgrade to Adobe Photoshop CS6, then you can use the DNG Converter to convert your images to DNG and use it with Photoshop CS5

  Mac: Adobe - Adobe Camera Raw and DNG Converter: for Macintosh: Adobe DNG Converter 9.3

  Windows: Adobe - Adobe Camera Raw and DNG Converter: for Windows: Adobe DNG Converter 9.3

  Let us know if that helps.

  Kind regards

  ~ Mohit

• I would like to stop my paid subscription to Adobe, the creative cloud because adobe does not work on my computer. In addition, it is not possible for me to stop my subscription on the site, because it does not show I have this subscription. That's why I

  I would like to stop my paid subscription to Adobe, the creative cloud because adobe does not work on my computer. In addition, it is not possible for me to stop my subscription on the site, because it does not show I have this subscription. That's why I need to helo, please, thanks :-)

  Hi Stephanie,

  Please let us know the problem you are having with your Adobe Creative cloud so that we can fix it for you.

  For cancellation requests, please contact customer service.

  Reference: cancel your creative cloud membership

  Kind regards

  Sheena

• When my Macbook connect to WIFI my normal PC to the internet cut

  First off sorry for my bad English, but as say the title "when my Macbook connect to WIFI my normal PC to cup of the internet.

  I was playing online games (WoW) on my normal PC I opened my macbook to work with her, and then I saw that I was disconnected from my game online so I test a few times and the problem is that whenever my macbook is connect to my Wifi my router send... my PC internet is disconnected (my PC is using cable connect to the router)

  Thanks in adv

  That would be a problem with the way you have the router or computers configured for wifi. It could be that they are all both use the same ip address. Usually, when configuring a router you begin by setting up a computer with cloning the mac address of the computer to the router and then the other set up. If you do not have a mac address on one of your computers, it's the problem.

• When I connect wifi or lan but it is not connect and began to turboshoot still appers a message "diagnostics policy service does not work.

  Separated from this thread.

  I ve acer aspire e1 - 531, now I am having problem about the internet, when I connect wifi or lan but it is not connect and began to turboshoot still appers a message "diagnostics policy service does not" can u tell me how to fix it... Please stp by step... Thank you

  Hello

  Thanks for posting your request.

  I would ask you to follow the steps below and check.

  While you are on the start screen, type cmd. Right click on cmd.exe returned and select 'run as administrator'.

  Once the command prompt window opens, type the following commands and press ENTER after each:

  net localgroup administrators / add networkservice

  net localgroup administrators / add localservice

  Type exit to close the command prompt window, or simply X starting at the top right.

  Restart computer and check if you still receive the message.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Unable to connect to the WLAN because FN + F8 does not work!

  Can anyone help or I have to do my warranty book. I have some problem with my computer WiFi functionality because FN + F8 does not work. I bought my laptop 3 days ago, and it's a very big problem for me. I do the Wi - Fi connection.

  Help, please

  Riuno

  Dear Ruino

  At first, I must say that it will be interesting to know what model of laptop you have. It will also be interesting to know the flash cards exist at the top of the screen if you press the FN key.
  Otherwise please go to START all programs utility from Toshiba and click on restart Flash Cards.

  Please also make sure that the WLAN antenna is turned on. WLAN LED should be on.

• You have to go back to 5 FF... can't find it. RoboForm does not work w/6.0.2

  I've updated to 5 FF. ? 6.0.2 and now Roboform password manager does not work. FF5. ? had an addon to make Roboform work with FF. I need to get back to 5 FF and can't find anywhere on the FF site.

  Do not downgrade to a version not support Firefox. Only Firefox 3.6.22 and Firefox 6.0.2 are fully updated for security and stability issues. all other versions have stability and security problems that do not have and will not be corrected. (Dated Sept. 7. 2011).

  You have updated to the new version of Roboform? It is compatible with Firefox 6.

  • http://www.RoboForm.com/support/news

  You can get a free upgrade on Roboform: http://www.roboform.com/support/faq/roboform-v7

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You must update some plug-ins:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• I have a computer running VISTA. The CD-ROM/DVD-rom does not work and can not read the CD of the program that I placed in it.

  It won't read a DVD.  It will not read ANY CD or DVD.  I tried 12 different CD/DVD.  This isn't an upgrade to Vista; the computer came "made for Vista" with Vista installed on it.  I had added Nero.  I removed Nero.  I did all the updates. I have not released the driver and reinstalled.  He claims to have the latest driver software, but it won't work.  The computer can see the CD/DVD, but he calls it a 'CDROM '.  It is not the case.  It is a DVD/Cd-RW with Labelflash.

  I did everything suggested that past discussions.  I ran FIXIT program that claims that the drive works properly.  It is not the case.

  I tried to get various programs to recognize.  They cannot see the installed media.

  I uninstalled iTunes.

  Please do not give me the answer of cut-and - paste stock; It does not work.

  Please tell me what to do to make Vista see the media inserted in the CD/DVD-RW drive.

  Thank you.

  Hello

  Well, if you have tried all the usual bugs try this:

  Make a Restore Point:

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ------------------------------------------------

  Then go to right click on UNINSTALL - - CD/DVD - Device Manager CHECK THE DRIVERS to REMOVE and
  continue.

  Reset.

  Occasionally, install an upgrade or a re - install will fix the problem and of course the drive or other hardware issues
  could be at stake.

  =====================================

  Here's the answer, just in case there is something you don't have, and I start up and down.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable
  or slight corrosion on the contacts (usually for a laptop) and other issues.
  

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===========================================

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Problems connecting to a projector. Laptop recognizes the new monitor but projector does not display anything.

  I have a Macbook Pro (non-retina display) mid-2012. I have a mini VGA screen that worked throughout the year and all of a sudden, it doesn't seem to work. My computer recognizes the new monitor (screen flickers and flies all content secondary screen) but the projector does not display anything. I tried to reconnect the cable, the cable VGA switch to turn on the projector and turn off, restart my computer and clouds of dust on the connections. Sometimes if I move the connection just that will work, but if I so much as breathe on it or watch funny it stops and I can't get it back.

  Jiggle the cable or adapter is something different, you have a physical adapter or cable problem. Any bit-reversal can help that.

• I am unable to connect to my router wirelessly to parents. I tried to reset the modem and the router and it still does not work.

  Presented labtop parents and can connect via ethernet, but still cannot connect to the wireless router. Ive rebooted both the modem and the router and ive also unplugged the power source. Help, please...

  original title: unable to connect to the wireless router?

  Hi Brandon,.

  What operating system do you use? (Windows 7, Vista, XP?)
  You receive any type of error message when you try to connect?
  What exactly happens when you try to connect?
  You receive an internet connection when you connect with an Ethernet cable?
  There are a few good troubleshooting in this thread. I suggest to look to see if it helps at all:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/unable-to-connect-to-a-wireless-network-Windows-7/734ecdef-99fb-4862-b63a-04cfa448cc06

• I have problem with new Explorer Firefox, because I need Lukutulkki translation program. I even does not work with the new firefox Explorer. What can I do with it?

  If I download the most recent firefox Explorer I can't use Lukutulkki program translation. This program is very important for me becauce I
  do not quite understand English. Should I start to use Googlechrome
  Explorer or do you have some other fix it

  See the help page at

  • www.lukutulkki.fi/ohjeet_faq.php

  If this does not resolve the problem, contact the author of the add-on for the support

  • www.lukutulkki.fi/Yhteystiedot.php

  You can also use various other modules or Web sites to translate

  • https://addons.Mozilla.org/Firefox/search/?tag=translate
  • http://translate.Google.fi
  • www.microsofttranslator.com