I have a Macbook Pro. I upgraded 10.9.4 one downloaded the demo for creative cloud. It downloaded and installed, but does not open. I stopped and tried to reinstall. The same problem.

Similar Questions

• I have a Macbook pro (2011 model). It gets stuck on the start screen on to half way through commissioning. This happens whenever the mac turns on. The problem is solved when I reinstall Yosemite to boot to Recovery Mode disk utility.

  I have a Macbook pro (2011 model). It gets stuck on the start screen on to half way through commissioning. This happens whenever the mac turns on. The problem is solved when I reinstall Yosemite to boot to Recovery Mode disk utility. However, the next time you start, the startup process is blocked to halfway to new (on the screen with the toolbar and the status of apple). I want a more permanent solution to reinstall the operating system every time. Would appreciate someone's suggestions and thanks in advance.

  Replace your hard drive.

  You have a backup of trust? If not, buy a disc of exterrnal for that as well.

  The progress bar from the left end at the beginning of the commissioning indicates that your drive has been so damaged, it could not be mounted. Five minutes of progress bar is shown as it does the equivalent of disk utility (ERD [Directory]). If you have reinstalled several times and the problem is not fixed, your drive is in solid form.

• Cannot download eBooks after upgrade of PC.  Recently I upgraded my laptop to one from the same supplier so all I had to do was to upgrade a few drivers on the hard drive.  My copy of ADE is unfortunately not too cooperative.  Whenever I try to download a

  Recently I upgraded my laptop to one from the same supplier so all I had to do was to upgrade a few drivers on the hard drive.  My copy of ADE is unfortunately not too cooperative.  Whenever I try to download an eBook, I get the message "E_AUTH_BAD_DEVICE_KEY_OR_PKCS12".  Uninstall ADE (three versions), as well as cleaning the registry does not clear the error.  And I can't cancel and reauthorize my new laptop as to authorize is greyed out.  Anyone else having this problem?

  Problem solved finally.  Used regedit.

  https://helpx.Adobe.com/Digital-Editions/KB/error-e_act_not_ready.html

• I have problems with Lightroom. I just downloaded the creative cloud with LR and PS PS works fine, but does not open LR. It is stuck on the license screen and freezes. Please advise...

  I have problems with Lightroom. I just downloaded the creative cloud with LR and PS PS works fine, but does not open LR. It is stuck on the license screen and freezes. Please notify.

  reset your preferences-

  Acrobat: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html

  Adobe media encoder: https://forums.adobe.com/thread/1713540

  Legacy: http://helpx.adobe.com/after-effects/using/preferences.html

  Bridge: https://helpx.adobe.com/bridge/kb/troubleshoot-errors-freezes-bridge-windows.html

  Dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html

  Flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html

  Illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html

  InDesign: https://forums.adobe.com/thread/526990

  Lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html

  Muse (mac): https://forums.adobe.com/thread/1246022?tstart=0

  Photoshop: https://forums.adobe.com/thread/375776

  Photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm

  elements of first: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html

  First pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html

• upgrade to windows 10, cannot open itunes, it opened the first time, and imported all my songs, but does not open a second time, get the error that the path is not correct and file not found

  upgrade to windows 10, cannot open itunes, it opened the first time, and imported all my songs, but does not open a second time, get the error that the path is not correct and file not found

  Try to repair the security permissions for iTunes for Windows and the empty/corrupted after upgrade/crash iTunes library.

  TT2

• I have trouble reading my Yahoo email. It highlights a message but does not open the e-mail message.

  Hello. I have trouble reading my yahoo mail. It highlights a message, but does not open it. Can someone help me?

  Thank you.

  Contact Yahoo support. It's their program.

  http://help.Yahoo.com/l/us/Yahoo/helpcentral/

• I'm trying to open an a 810 nikon raw file but does not open. said gross can't camera model. I have re installed nx2 with erroe u43m1d207. How to open raw files?

  I'm tryng to open an a 810 Nikon raw file, but does not open. Said GROSS CAN'T camera MODEL.  I have re installed nx2 with error code u43m1d207. How to open a file.

  You can use the dng converter if update your adobe programs fails.

  Adobe - Adobe Camera Raw and DNG Converter: for Windows: Adobe DNG Converter 8.7

• Creative programs will install but will not open with the same error message

  Hello thank you guys for any help you can provide.

  I installed creative cloud and install a few programs. None of the programs opens and I get the same error message for each of them.

  Adobe first Pro CC 2014 cannot be opened because of a problem.

  Check with the developer to ensure that Adobe first Pro CC 2014 works with this version of Mac OS X. You may need to reinstall the application. Don't forget to install the updates that are available for the application and OS X.

  Click report to display more detailed information and send a report to Apple.

  
  

  All creative programs say they are up-to-date. They have not been registered as I could not opened a still. I'm running one ate 2014 MBP with a 2.8 i7 processor, 16 GB of ram and an SSD 1 TB with 600 GB of free space.

  
  

  I uninstalled the programs and have reinstalled with the same result. I also followed solutions to other problems for programs starting or loading, without success. Any help to solve this problem or the direction of a former validated solution would be greatly appreciated.

  
  

  Thank you

  
  

  
  

  Do as he says - click on the button and provide the detailed information.

  Mylenium

• Firfox is always loaded on my computer, but does not open. Would not open after that I did a restore (have XP).

  I did a restore (Windows XP). After that Firefox would not start. You can see the "Hourglass" for a second, but nothing happens. I tried the Mode SAFE Start and it wouldn't work. I went into the program file and tried to open with the .exe of the fie. Nothing, I don't don't want to lose my favorites by installing a new version. I have tried creating a new profile becauae I don't know if I can do it right or even if it would work.

  Would appreciate any help. Thank you. Bearcat78

  Hello Bearcat78.

  I advise that you think... a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. But it's not too difficult.

  Note: You can print these steps or consult them in another browser.

  First, save your profile by saving a copy of the profile file... See: profiles of boards - where Firefox stores your bookmarks, passwords and other user data.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

• service pack 1 said it installed but does not have...

  I have downloac

  DED sp1 several downloads and installed. my computer doesn't recognise it, causing all updates and upgrades impossible.

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you here what Service Packs, if any, are already installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, first of all the installation of SP1.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  And if you have any problems:

  There is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  See you soon.

• Problems with .dll and WPD files Volumn Driver Windows files is installed but does not work

  I wondered about the .dll files... I have internet explore as a default package as well as Java (TM) web start launcher by Oracle. Can you suggest other programs. I have all the Adobe programs. I would really be able to bind the DLLs of Visual Basic... but VB 08 also do not install and run on my computer, but also the Framework.NET version 4. Be an error in C:\Windows\system32\mvsvc.dll

  I couldn't install Windows WPD files Volumn driver and here's the windows diagnostic ran for me: what can I do to get this driver to run. Device in Windows systems manager is not supported on my system.

  Description

  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 10.

  Signature of the problem

  Problem event name: PnPDeviceProblemCode

  Architecture: x 86

  Hardware ID: wpdbusenum\fs

  Configure the class GUID: {eec5ad98-8080-425f-922a-dabf3de3f69a}

  The PnP problem code: 0000000-a

  Driver name: WUDFRd.sys

  Driver version: 6.0.6001.18000

  Driver date: 01/19/2008

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  Files helping to describe the problem

  DMI9C45.tmp.log.XML

  LOG9C46.tmp

  wpdfs.inf

  Thank you. I tried for days now to get this driver to run.

  Jann B

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forum. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

• I have app that is installed but does not how to open

  I watched all the videos, read the FAQ and it still did not help, should I completely remove it and try and redownload creative cloud? I'm new to all this and so desperate and frustrated and in tears! I needed to do this bc I have a project that I really need to work on, and I paid, this is not the trial and its does not work

  Parischic84 wrote:

  I'm working on

  Mac OS X Lion 10.7.4 (11E53), now it says that I have downloaded Adobe Illustrator should I just uninstall all creative cloud and try and reinstall?

  Yes.

  Uninstall with this tool

  http://www.Adobe.com/support/contact/cscleanertool.html

  then try to reinstall

• Have installed but does not work, any ideas?

  Have Windows Vista and Internet Explorer 9, the 32-bit version. Flash Player is installed, uninstall, restarted my computer, laptop and installed new corn cannot operate. It is being installed, but whenever I try to view what anyone who uses Flash Player, I am prompted to install it.

  You can see the animation Flash (red rotation 'f') to http://www.adobe.com/software/flash/about/ ?

  On IE9, tools, you have activated ActiveX filtering?

  On IE9, tools, manage add-ons, don't you see Shockwave Flash Object, and it is enabled?

  What files do you have in C:\Windows\system32\Macromed\Flash?

• I can't install service pack of windows one. Computers it says its installed but does not have initaite it.

  I tried to install Winows Service pack 1 for Vista repeatedly. The PC says its installed. But other programs can seem to find. for example, Norton 360 say it can not be installed because I do not have windows service pack 1

  Adding to the suggestion of Anoop, you can also try the following

  See the section under the tool File Checker system - how to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista http://support.microsoft.com/kb/936212>

  http://support.Microsoft.com/kb/822798/en-us>

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates>

  http://support.Microsoft.com/kb/971058/en-us>

  UTC/GMT is 09:08 on Sunday, July 8, 2012

• my virtual memory is low, how can I get more virtual memory for my games is all i want to do i have deleted programs, but always says I have no virtual memory and a lot of mistakes appear downloads game but does not open for play

  I get a lot of errors when I start the computer as kernal32.dll.and memory low andvirtual momery canyou help me

  -----------------