I have a new hp running windows 8.1 in turn and have tried to install the adobe reader software.  The installer downloads (1) and I choose to run it, but it is just a blank screen appears.  I checked the Task Manager and it takes memory, but does nothing.

I have a new hp running windows 8.1 in turn and have tried to install the adobe reader software.  The installer downloads (1) and I choose to run it, but it is just a blank screen appears.  I checked the Task Manager and it takes memory, but does nothing.  After you let it run for 3-4 minutes, I kill the task.  What can I do to get the player installed on this machine?  I tried using chrome, firefox, and explore and get the same results with everyone.

Try the Installer http://get.adobe.com/reader/enterprise/ offline

Tags: Acrobat

Similar Questions

  • I tried to move the OLD pilot programs, remains lost on FDI from the previous PC, I could have accidentally taken on the Task Manager.

    I moved my maxtor IDE 120 from a computer AMD I was using for the last five years and then made an attempt to upgrade the RAM on it and messed up! So, I (US) out the HD and reinstalled on your OLD computer from my friend that he had to get a newer, faster and I did a repair or installation upgrade when that has a little more updated with all latest drivers because it just not has not been exactly smoothed again and I accidentally ran scanning drive and a few other additions little support for repair on it still is a little speed I have a out(I guess) Manager of the tasks off my OS. Now anyway within another procedure to repair (upgrade) installation to get it back? And that somehow I'm able to move safely in some dusty OLD programs without a clean install? You are very appreciated for reading my explanation jumble!-Alweed

    Hello

    1. How did you remove the Task Manager?

    2. what happens when you try to open the Task Manager? If you receive an error message and then, after return the exact error message.

    Check out the following articles that might help you remove unwanted programs and improve the performance of the computer.

    Slow PC? Optimize your computer for peak performance
    http://www.Microsoft.com/athome/Setup/optimize.aspx
     
    How to make a computer faster: 6 ways to speed up your PC
    http://www.Microsoft.com/atwork/maintenance/speed.aspx

  • my windows 8 pro responds with indicated 100% disk usage in the Task Manager

    my PC pro 8 windows stops responding and when I check in Manager tasks, it indicates 100% disk usage while the CPU is not used and not even alone is open. I don't know what the problem with my system since this problem started recently. I use windows 8 months that it released until yesterday, I had no problem. I can restore pc to the normal operating mode after several forced off using the power button. This especially happens first start to the top of the day while all day if I'm constantly using pc I don't encounter any problem, but if I put it to sleep and again once I wake up get similar problem. I am really worried please help me solve this problem. When I checked in the Task Manager it is the system that is causing the issue

    It's my system config

    Win 8 pro 64-bit

    AMD fx cpu 4100

    4 GB of ram

    Thank you

    Help, please

    Hello

    Just disable superfetch service...

  • Windows 2000 SP4 shows no more than 1 CPU in the Task Manager

    Hi all...

    My environment:

    ESX 3.5 Update 3

    VM: Windows 2000 SP4, 2 GB of RAM, 2 Vcpu

    Problem: The Task Manager does not appear 2 CPU.

    This virtual machine has been migrated from a VMware Server 2.0 VMware Converter standalone 4.0.1 and if I add 1 to 2 Vcpu and 4 Vcpu, Manager still shows only a single CPU tasks.

    VC on, selecting the machine, performance TAB, I can see CPU 0 and CPU 1, but CPU shows minimal use.

    I have attached the 1 document with 2 images, the Task Manager and the other Virtual Center.

    Go to the Device Manager to the computer object.  If the layer Uniprocessor HAL, you need to change to Multi.  Google, a lot of info out there.

  • I downloaded Windows 10 to my laptop.  It did not come with Adobe Reader software.

    I downloaded Adobe Reader DC and I get a pop-up message every 30 minutes which States that "this application requires a version of Adobe Air cannon located.  Please download the latest version of the form of the run-time Http://www.adobe.com/go/getair or contact the author of the application for an updated version.  Whenever I try to download, I get the same version of Adobe Air.  How can I get the latest version or get rid of the popup message?

    Hi rubyl17097164,

    You can try running this cleanup tool:Download Adobe Reader and Acrobat tool - Adobe Labs

    Restart your computer and download a new copy of the CD from the mentioned link: Adobe - Adobe Acrobat Reader DC Distribution

    Let us know if that helps.

    Concerning

    Sarojini

  • I have a document on my Adobe Reader software that I want to delete, and I'm not able to do, can anyone help me?

    How can I remove a document from my Adobe Reader?

    If you are on Windows or Mac, the file is deleted outside the drive. You can select the new file to open it. Then use file > properties to find the location. Then you can delete it.

  • I tried to install the Exchange management tools 2010 for Windows 7 Pro x 64. When it comes to check the pre - req, it always fails with this error:

    "Cannot load Windows PowerShell Microsoft.PowerShell.Security snap-in due to the following error: could not load file or assembly 'file:///C:\Windows\System 32\WindowsPowerShell\v1.0\Microsoft.PowerShell.Security.dll' or one of its dependencies." The system cannot find the specified file. »

    I checked the path specified and the file is not located there, however, watching another installation of windows 7, the file is missing from this situation as well, but works very well.

    Since PowerShell V2 is already installed, of course it cannot be reinstalled.  I tried to run a repair with the DVD of Windows 7, but as it is patched SP1, the original disc does not work.  Nor will re-apply the Service Pack.

    About abandoned on the installation of exchange tools and will likely be on a different computer, but would be nice to have powershell works again.

    Hello
     
    The question you posted would be better suited in the TechNet Forums. I suggest you post your question in the Exchange Server 2010 Forum.
  • __I have tried to install the latest update of soft security microphone, but it will not download. I get error 80240016 OECD

    I tried to use standard messages helo, but have not been able to get the upgrad to load. This will help to uninstall essentials Micorsoft and reload?

    http://support.Microsoft.com/kb/957307

  • running windows 7, I can't launch the Task Manager.

    I get a message saying that windows cannot locate C:\Windows\System32\taskmgr.exe

    Don

    You have installed Process Explorer?

    It is likely that you have chosen to replace the Task Manager in the Process Explorer Options. Disable the option and you can run them both.

  • The Explorer starts do not, the Task Manager does not, just background image and cursor.

    Last night my Windows did 18 updates. This morning I started my computer opens the browser and my computer is stuck. I tried, but I couldn't get it to work again. So I reset it. After I received the welcome message from my background and my slider appeared but no icons, no start no bar, nothing else. I tried to open the Task Manager, but it did not work. After that I restarted my computer on Mode safe and I tried to do a system restore, but I have no restore points. I don't know what else to do. Please help me!

    You must first make sure that your computer has no malware on it. Restart the computer in safe mode with network. Click the second link below and download Malwarebytes. Update Malwarebytes and perform a full scan. Choose to quarantine found nothing. View your results and we'll go from there.

    How to start in safe mode

    Malwarebytes.org

    How to use Malwarebytes

  • The Task Manager appears for a second and disappears immediately

    Little matter how to open the Task Manager, it appears a second and then immediately disappears.

    Here's how I tried to open the Task Manager

    Right-click on the taskbar

    Ctrl + alt + delete

    Start-> run-> taskmgr.exe (tried it in the start menu)

    CTRL + SHIFT + ESC

    I didn't change any setting on the PC and recently noticed that it is not open even for a second.

    Thanks for your help!

    Shayan

    Hello

    1 have you tried the steps mentioned in my previous post?

    2. What are the results?

    If you need to run an anti-virus program, I suggest using the scan Microsoft security online and find all infections.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.

  • Windows XP pro, can not see desktop (just a blank screen) at startup. can access only via the Task Manager. How can I fix? __

    Windows XP pro, can not see desktop (just a blank screen) at startup. can access only via the Task Manager. How can I fix?

    In the Task Manager, click on "File" and select "new task (run).

    Type explorer.exe, and then press the ENTER key.

    If you are able to connect successfully to the windows, scan the entire computer using updated anti-virus software and check the virus.

  • After the last update on Wnidows 7 Firefox opens just a blank screen (black).

    After the last update Firefox on a machine Wnidows 7, Firefox opens just a blank screen (black). It worked fine until the latest update. It does not open in "safe" mode I tried several facilities clean and using various other compatibility settings. I also tried various changes of display. Closing X is still under the black forest as I can by conjecture activate this.

    Get a black screen after updating to Firefox 33 can be caused by a problem with hardware acceleration in Firefox.

    You can check if there is an update for your graphics display driver.

    Try to start Firefox in Safe Mode by holding down the shift/Options key.

    Disable hardware acceleration in Firefox.

    • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

    You will need to close and restart Firefox after enabling/disabling this setting.

  • Cannot stop a task from running in the Task Manager. Windows 7 premium every time I have...

    starting my computer and go to the desktop, I get a window that displays C; / ProgramFilesx86webarcade.  The specified module could not be found.  I tried to end the task in Task Manager, but it does not stop.  It always appears when I start my computer.  In the Task Manager when I check the box show processes from all users, I am able to complete the task.  If I do not check this box, I get denied accsess.  Someone please help me with this.

    Thank you!  Thank you!  It worked!

  • Windows 8 does not not log on screen, all black dekstop, explorer.exe, disc missing from the Task Manager

    Hey. I am a newbie in this forum. And I really like to make my PC more 'me' even though my parents and brother told me that my PC did not differ from how difficult. But, I still like my PC... ^ ^
    But my PC encountered a problem in my birthday (March 8, ehehe just FYI). Its a terrible birthday gift: (...) Oh, there. Its all started when I accidentally install a skin pack or win 7 in my PC 8 victory. There is nothing wrong with installing proggress except a notification which inform on win 7 Starter has not installed correctly. :( Well, I ignored, first. But after I have it reboot, my dekstop went all black but it still can open the Task Manager. And then I try the system restore. It did not work properly. The only thing made worse. Somehow, my "(le seul compte dans mon PC) DELETED account." In fact, the log on screen consist only of the ease of access and power button with backgorund optomistic. Where are the data of the user, I mean a place where we inserted the password? XC its make me super bad mood. And after some restoration system with various restore points, I restarted my PC in safe mode successfully. Yippie, its worked perfectly in safe mode. I created a new account in safe mode. I thought that my problem more but no. and the bad news is that there is only one user account (a new one) in the journal on the screen! It'll be better I have the new account very well work, but it didn't! The dekstop always all black with no taskbar and it's the same problem as the first.
    I am not really confusing. What should I do? Should I remove a skin pack safe mode? or reinstall win 8 in PC COUNTER? Or do something that you already know the guy?
    Help me. I am so irritated by this problem. In any case, I want to ask one last thing, you prefer something after me or just think it was a charitable organization? Well, I just want to know. And I'll do my best to show my appreciation once you help me. I am so TROUBLED even if today is my birthday! I want a big anniversary with neither party. But its seems no big birthday. Please, help me. His will probably be my MOST BEAUTIFUL GIFT to a person who I know in internet. If you need something detailed about my problem, ask me. I need your response. :") SURE ME MY CRAZY MOM, IF SHE KNEW IF I AM WRONG IN MY PC AGAIN.

    Oh, there. The explorer.exe does not start in normal mode, but it works fine in safe mode. Also, I discovered that the disc is missing from the Task Manager. :) Help?

    Wish you a very happy birthday, Damaris.

    Of course, I can understand the situation you're in right now, and it's a shame. I will be happy to answer your query and try my best to offer my help as a gift for your birthday.

    Let me ask you;

    1. What happened when you tried the system restore?
    2. What was the last time that the computer worked well?
    3. What security software is installed on the computer?
    4. Remember to no particular change in the computer before the show?

    The issue may be due to any dispute of third party software, virus or any system or missing files / corruption. Let's try the methods below and check the status.

    Method 1: Since you are able to start the computer in safe mode without any mistake, I you suggest to start the computer in safe mode and then perform the clean boot to avoid software conflicts.

    Step 1: Start the computer in safe mode (as you are able to start the computer in safe mode with the steps you tried).

    Step 2: Perform the clean boot

    To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

    How to perform a clean boot in Windows

    Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

    Method 2: Run Microsoft Safety Scanner

    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

    Microsoft safety scanner

    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Note: Data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

    Method 3: Run the tool File Checker system in case where any system files are missing or corrupted.

    System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

    Enter in the right edge of the screen and then click on Search. Or, if you use a mouse, point to the corner bottom right of the screen, then click on Search. Type the command prompt in the Search box, right click invite, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

    At the command prompt, type the following command and press ENTER:

    sfc/scannow

    Note: Not close this command prompt window until the audit is 100% full. The results of the analysis will be posted when this process is completed.

    Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

Maybe you are looking for

  • Why is the search bar in firefox about: Homepage is not responding?

    When I try to search something on everything: home, either by clicking the search button or press return, nothing happens.

  • Satellite A100-095: problem of graphics - Vista OS but says driver is not

    I have a toshiba A100-095 with nvidia geforce go7300. I use my pc for developing .net applications, today after a few hours, I put the laptop in standbymode, when I reboot the system, vista windows told me that video drivers caused problems and had r

  • home vs pro question

    I'm looking for a reputable dealer that still has copies of XP in stock so I can move a portable older that someone gave me form Vista to XP (it has only 1 GB of RAM). I realized something. I intend to take the laptop to my night school and connect t

  • Change the LCD SL500 of WSXGA + 1680 x 1050 to WXGA 1280 x 800

    Hello. I have laptop: model Lenovo ThinkPad SL500 2746-9AG with 15.4 "screen lcd anti-reflective screen WSXGA + 1680 x 1050 display. I wish I had a crystal clear screen resolusion 1280 x 800. Under XP, I turn on clear type font and the effect is quit

  • Convert illustrator color mode in extendscript

    I have a series of images drawn d3 svg I bring into illustrator, which I can run a script on. before the script to work properly, I have to go to the file menu and pull down the color mode of the Document and change RGB to CMYK. How would this code a