I have a Photosmart Plus B210a all in one. Automatic adjustment of photos.

Similar Questions

• Photosmart Plus, e-all-in-one B210a... product #CN216A

  Photosmart Plus e-all-in-one B210a... product #CN216A.

  I need to know how do I set up my printer so I don't have to retype the security key whenever I turn it on?

  Okay, well, the router is not the problem.  Printer is very close to the router?  You can change the router 11 channel to another?

  Another idea is to not turn off the printer.  He will go to sleep on its own after a few minutes of non-use and use about the same amount of power as when you turn it off.

  Now, if you turn power completely off to the printer (as in cutting its power strip) that would explain the loss of password.  The printer must always at least a little bit of power to maintain its clock and some memory functions.

• Size of printing HP Photosmart Plus e-All-In-One B210 series has sent a

  Hi, sorry in advance if I am dumb.

  How can I make sure the photo by email to my HP Photosmart Plus e-All-In-One B210 series are printed on 10x15cm photo paper?

  In fact, how I want to print any photo is printed on paper 10x15cm.

  Thanks for the research and forecast of some indication of this dilemma, I have

  Hi tabby1471,

  All photos sent by e-mail to print prints on a default size of the format 4 "x 6" photo. "

  There is currently no way to change the size of the paper.

  Thank you

• HP Photosmart Plus e - all in one, failure ink system, Oxc190013

  HP Photosmart Plus e-all in one, read the error message failure, Oxc190013, ink on iMac system, ' the printhead has failed and can print is no longer.  3 color cartridges work but does not print black ink. I checked the surveys of the cartridge and the black is about half full, and it's a HP 564XL. I also removed the cartridge and the pad has not dried out. Is - fixable?

  zekefreak

  See the following link

  http://support.HP.com/us-en/document/c02142902

  If you have followed all the steps, contact hp support and see if a replacement print head resolves the problem. Good luck!

• HP Photosmart Plus e-All-in-One B210 series: addition of a 6 x 6 custom paper size

  Help!  I would like to print on a sheet of paper of 6 x 6.

  Please tell me how I can get the printer to recognize that it is a normal piece of paper - I have to add as a custom for the printer driver size?  How do I do that?  I tried many things and I am yet to come errors.

  Hello linnylin22,

  Yes, you will need to add it as a custom size.  To do this, you need to install a different driver.  Please, take a look at this post for instructions on how to do this, depending on your operating system.  Deskjet 450 driver should allow you to change the paper size and the size of the document to 6 x 6.

  Please let me know if this helps solve your problem.

  Good luck!

• How can I know which B210 series I? a, b, c and d? HP Photosmart Plus e-all-in-one B210 series

  Unable to find information.

  Check the label on the bottom or back of the printer.  If this isn't there, open the door as if to replace ink and look for a label.

• Photosmart HP B210a more: HP Photosmart Plus B210a shows a blue screen with error B8145558 and restart.

  For two weeks now my HP Photosmart Plus B210a was wrong to behave. Until that time, I was a happy user, but since it says there is an error in the printer and that I should turn it works again.

  Putting out voltage is actually not possible using the button, as this will trigger a reboot, ending up on the same screen as before. During the start cycle, I have a brief moment where I can access the regular menu before it shows a blue screen with the B8145558 error code. 2 seconds after it is shown, a white screen appears with the title of printer error and the message to reboot.

  So far, I have cleaned the print head and the connections of all dirt and residues. I even managed to start and finish in a copy process, before it gives me the error. However, the error will come, and then it's over.

  Someone has encountered this problem before? Currently, I find only 1 reference to this error in Google and not on this site. Any suggestions that I could try?

  Hi @kootstra,

  From your description, I suspect there is a problem with the firmware that may be irreparable. We can try a reset, but because the printer will not stay on very long main screen until the error appears that we are not able to access the menu of support, we need to reset.

  I'll send you a PM (private Message), but before I do, please see the HP Privacy Statement.

  This privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online activity is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.

  There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers.  Reset to will sometimes fix problems, so resetting is not the issue.

  A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access.  These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results.  A wrong button push and you might no longer have a printer, but rather an expensive paper weight.  On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!

  Reset the printer: what you need to know

  Please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

  

• HP Photosmart Plus B210a won't come out of power save mode.

  The printer works fine until it sits awhile and goes into 'power saving mode'. Nothing it comes out that mode except unplug the power cord and back running the printer. I disabled the: power saving mode and have had no problems. Is there a fix so I can turn the: energy safe mode: back on?

  I have a HP Photosmart Plus B210a and it's brand new. I am using Windows 7 32 bit and I get no error message. When I ran the HP print utility, all checked in green except when I tried to print a test page and test page remained in Quebec and a red X.

  Technical support told me that the problem was a hardware problem. They sent me a new printer!

• HP Photosmart Plus (B210a) - part way freezes by printing

  Product name: HP Photosmart Plus (B210a)

  Operating system: Windows 7 (64-bit)

  I recently had experinece problems when you try to print. The printer starts printing the paper, freeze for a minute or two and then spit the sheet on incomplete. He will then proceed to print another sheet, outside, with black strips, running through it, either with a series of letters and symbols on the top. It seems very occasionally to print without any problem at all.

  To try to resolve the problem so far, I've updated the software of the printer, it seemed to have no effect, and I ran printing HP and doctor scan, but it can't seem to pick up all the problems. This is a wireless printer that is connected to a network, it was connected to and has worked previously.

  I hope someone can help because I'm getting very frustrated! Thank you in advance.

  Hi A0805_JKS92,

  Welcome to the HP Forums, I hope you enjoy your experience!

  I understand that the printer is not printing correctly.
  I'll be happy to help you.

  I turns off all startup programs to make sure there isn't something blocking the printer from printing. Click Start, in the search box type to perform, enter, and then type msconfig, click OK.

  Click the Services tab to select the hide all Microsoft Services check box. Click Disable all, and then click OK.

  Then click on the tab at the top of the start page. Click Disable all.
  Restart the computer.

  Disable any antivirus software.

  Try printing right now to see if that makes a difference.

  Then, return to msconfig and enable all the Microsoft Services and enable all Startup tab turn on the Antivirus software.

  I think that this will provide a solution to your problem. Thank you.

• Photosmart Plus B210a will not print on the Windows XP computer, but works on the Windows 7 computer

  I just got a Photosmart Plus B210a printer. I was able to install it using the wireless for my Dell Dimension 3000 3 GHz computer with Windows XP 32-bit SP3. He will answer analysis, but it will NOT print, it doesn't matter what I do. I have a Netgear wireless router. I tried the Dell connected directly to the router using a USB of Netgear WG111v3 USB adapter and cable. No impression whatever the configuration.

  On the other hand, I was able to make the printer work with an Athlon II X 4 630 with Windows 7 Professional 64 bit AMD machine. Everything works independently to know if the machine is connected directly to the router Netgear or using the above USB adapter.

  How can I make work B210a with my Dell with Windows XP? Is this a problem XP because Windows 7 has worked perfectly, but Windows XP would only scan.

  Subsequently, I deleted all initially loaded B201a software. At the printer detects the network, then reloaded the software from the CD. The printer then worked fine. What a relief. Perhaps the problem I had previously was linked to my trying to use the USB port when the printer originally did not work.

• Ink system failure code... 0xc19a003... Photosmart Plus B210a... Help

  I have a HP Photosmart Plus B210a printer code

  My problem is the following: -.

  The printer screen is display the following information:-the 0xc19a003 ink system failure code. Please turn printer and then turn it on again.

  I tried several times with HP solutions. Nothing worked and I just keep getting the same results. Ink system failure... 0xc19a0003... Please turn printer and then turn it on again.

  Can anyone help me please with a solution.

  HI VTHapa,

  I appreciate your help. After trying to solve my problem with your suggestions and the HP suggestion, nothing worked. So I abandoned my printer and bought a new one.

  Now I don't know how to remove my ad?

  Scooter

• Photosmart Plus B210a ink level by computer will not work

  I have Photosmart Plus B210a. Running Windows 7.  The function to determine the level of ink by computer suddenly won't work.  The option will not even appear in the devices & printers screen.   I install only the HP cartridges.

  It is possible, it was lost if you did an update of the Hp software. To get the option on your computer, you can download the latest drivers. Don't forget to uninstall and re install with updated drivers. When pilots selection select features complete drivers.

  Updated drivers

• problems with the HP Photosmart Plus b210a Wireless

  Good evening. I have some problems with the HP Photosmart Plus b210a. Precisely after printing when the printer is not detected on the network and is defined as "not available". The works remain in the queue and the printer is turned on and on again unable to work in print queue.
  The printer on the network report says "Success" for each element

  It is the same for the iPhone 4 and iPad 2

  The system is composed of:

  MacBook Pro 13 "with OSX 10.6 update now
  Connected to the Internet router Wavewgate Digicom3G150 with key
  HP Photosmart B210 Pro Aio series with ultimate drivers Apple

  Network:
  D4 HW (MAC) address: 85...
  192 168 123 102 (non-static) IP address
  DHCP configuration
  Authentication: WPA - PSK
  Encryption: Auto (AES / TKIP)

  The same system also use a PC with Windows Seven Home, but in this case, the printer works PERFECTLY! Even with the iPhone and iPad!

  Thank you for the help that you can give me

  OK, I will assume that the connection of the printer to the router and the router are OK for 3 other devices work correctly.

  Make sure that your OS X is healthy:

  1. download and install OS X Combo Update.
  2. download and install the printer drivers HP from Apple.

  After that, you can reset the printing system once more.

• Photosmart Plus B210a will not touchpad as missing HP Solution Center scan

  Hello

  I'm on Windows 7 Professional 64 bit

  I have a Photosmart more B210a

  For 18 months he has been fine, but now the HP Solution Center disappeared.

  I tried to uninstall and reinstall.

  I did both the original disc and then using the software "full feature", but the Solutions Center is nowhere to be seen.

  I use the wireless printer and everything works except that I can't use the touch pad to analyze, because there is no way I can activate it.

  So, how can I get the HP Solution Center - please, do not say reinstall as I did 5 or 6 times using the drive and the software PSB210_231.exe.

  Thank you very much

  Mike

  Thanks again

  I'll try that as soon as I get home

  Mike

• black and will not print on hp Photosmart Plus B210a of Window Vista model

  black and will not print on hp Photosmart Plus B210a of model

  The post here could help solve the problem.  Be sure to check the vents.