I have a problem in installing Service Pack 3 on my Dell Inspiron 510 m laptop running on Windows Xp home edition. Help, please!

During the installation of Service Pack 3 on my laptop Windows Xp Home edition, I get a message 'Insert CD - Microsoft Office Xp' Professional with Front Page.  I don't have all the CDs of origin provided by Dell but that you can't find CD with a name of file/label - "Microsoft Office Xp Professional with Front Page"

Could you please give your advise how I can fix this?  My computer is not updated for a long time due to this problem.

Thank you

Hi Paul B.

Thank you for visiting the Windows Vista community.

The problem is related to Microsoft Office, and will be much better suited to the Office Discussion groups.

Here is the link for the Office Discussion groups:

http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

Kind regards
Amal-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • I am running Microsoft Windows XP Home edition Version 2002 Service pack 3, use the 32-bit or 64-bit upgrade to Windows 7 Home Premium?

    running Microsoft Windows XP Home edition Version 2002 Service pack 3, used the 32-bit or 64-bit Windows 7 Home Premium upgrade?

    I followed the instructions on the card that came with the software... indicating that, if I look at my computer it was telling me that my computer works... either 64 or 32, but it does not work.  So my question is, how do you know?

    You probably have the 32-bit version of XP (in most individuals, and if your system properties page does not have 64-bit, then you have 32-bit.)

    However, if you now have XP 32 - bit or 64-bit XP isn't the issue that relate to your decision to install 32-bit or 64-bit Windows 7.  This decision depends on the question to know if your hardware can support a 64-bit operating system.  In this regard, the main reason for users to install a 64-bit operating system is to allow the use of more than 4 GB of RAM.  If your hardware does support more than 4 GB of RAM, there is no interest to install the 64 bit version of Windows 7.

    You run the Windows 7 Upgrade Advisor?  With what results?

    Click Start > run and type msinfo32 in the "Open" box and click OK.
    After the system information window has had time fill, click Edit > select all, and then click Edit > copy.
    Paste (CTRL + V) into your next reply here.

  • Problems to install Service Pack 1 for Vista

    Hello

    I'm running my computer on Vista Home Premium 32 bit only.

    I'll just say everything that happened to that meets anyone knows exactly what is happening. Recently, I received a few DVDs of the trial version of Adobe, who quickly, I tried to install. The installer says I need Windows XP Service Pack 3 or Vista Service Pack 1. I found this curious because I thought that I had installed SP1 long ago when it appeared on Windows Live Update. After checking, I discovered that I had not installed for some reason any. I watched in Live Update for download, but it wasn't there, so I came on the Microsoft site and downloaded the stand-alone version of the service pack. I have closed all the programs that I had running and run Setup. He got to halfway through the installation bar (first?) and has stalled for a while, then extended to the end of the bar and displays an error, which contained a link to this page: http://support.microsoft.com/default.aspx/kb/947366. I followed the steps in resolution 2 and downloaded system update readiness tool. I ran the installer, but it seemed just to stall for a long time, so I canceled and he run. This time I got an error before he began to install (Code: 0 x 80240009). I looked for a solution and came across this http://support.microsoft.com/kb/929833, with some people claiming it fixed.
    I followed the steps and restarted my computer and it is no longer displayed the error, but it just keeps stalling at the installation screen. I decided to see if I could find an alternative
    solution to the original problem with the Service Pack and came across someone who says that McAffee was responsible, which is the virus scanner, that I installed it on my computer. I disabled
    pretty well all of the program, as well as my firewall and restarted the computer again. I ran the installation but got the same error. I have reactivated my firewall and McAffee and now I'm
    at a loss on what to do next.
    To sum up; I can't install SP1 or system analysis tool and I need to.
    If you need more information, let me know.
    Thanks in advance

    Hello, Ember09

    This seems to be an invalid data error code, Service Pack 1 installer was corrupted when you downloaded it, try to download it once more and check if you get the error again.

    Download the stand-alone update: x 64 | x 86

    We can't wait to hear back on your part.

    David
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I have a problem, try to uninstall the ask toolbar. get the error message: cannot access the VB script... need help please

    I have a problem, try to uninstall the ask toolbar. get the error message: unable to access the VB script... need help

    Hello

    How do you try to uninstall the toolbar?

    I would suggest trying the following methods and check if it helps.

    Method 1:

    Try the steps in the following Microsoft article and check if it helps.

    How to fix script errors in Internet Explorer on Windows computers:

    http://support.Microsoft.com/kb/308260

    Correction of errors in Internet Explorer: http://support.microsoft.com/kb/822521

    Method 2:

    Try to uninstall the toolbar, programs and features and check if it helps.

    Uninstall or change a program:

    http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

    Hope the information is useful.

  • On Windows XP, I can't install Service pack 3. Keep saying cannot find the specified file and install shut-off valves

    I have re-uploaded service Pack3, about 3 times, each time in the middle of the installation, it gives a message with no error saying number cannot find specified file and stop the installation, I tried to do this with the firewall disabled, and even with the antivirus disabled. I can't use some programs because they require service pack 3. Please help me get installed so I can use the programs I already paid for.

    Release notes for Windows XP Service Pack 3
    http://support.Microsoft.com/kb/936929

    The space of hard disk required for Windows XP Service Pack 3
    http://support.Microsoft.com/kb/947311

    Steps to take before you install Windows XP Service Pack 3
    http://support.Microsoft.com/kb/950717

    How to troubleshoot an installation fails on Windows XP Service Pack 3
    http://support.Microsoft.com/kb/950718

    How to obtain the latest Windows XP service pack
    http://support.Microsoft.com/kb/322389

    Download Service Pack 3 (SP3) from the Microsoft Download Center if you have any problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

    Download the Windows XP Service Pack 3 package now

    (http://www.microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4)

    Important These service packs apply only to 32-bit versions of Windows XP.

  • Problems with Service Packs - when you try to install Service Pack 2, it says I have to install SP1. When I try to install SP1, it says that I have already.

    My automatic update did not work, so I went to the site to try to download Service Pack 2, one seemed to have trouble with my computer. After I downloaded it, I tried to run, but he said I had to download Service Pack 1. So I did it. When I try to run this file, it says I have already installed Service Pack 1. So I tried to restart the Service Pack 2, but she is always claiming that I need Service Pack 1. I don't know what I'm supposed to do. Can anyone help? I'd be happy.

    Hi mistyrayns


    You can check if the below steps help-
    Step 1:
    I suggest you to check if you have information that service pack 1 is present on the computer. You can click
    Start and run. Then type msinfo32 and press ENTER. Check if Service pack 1 is present in the information provided.

    Step 2:

    If you have service pack 1 installed, and mentioned in the information from the computer, then I suggest you refer to the article below and uninstall service pack 1 computer.

    http://support.Microsoft.com/kb/948537

     

    Step 3:
    After successful uninstallation of SP1, try to install both service pack 1 and 2. Check if the issue is resolved.

    I hope this helps.

  • Problem installing Service Pack 1

    Hello I recently restored my computer to System. I was installing all the updates for my system to speed, however when I downloaded and installed Service pack 1, it tells me it has installed, but doesn't show that there in the installed updates section. And when I try to download Service Pack 2, he said that I should install Service Pack 1... I have about 5 times. I'm stuck with what to do so that my computer is not running very good with some programs

    Hi Chris,

    Thanks for choosing Microsoft Community!

    You have reached the right forum. Let us work as a team and try to solve this problem.

    If I understand correctly, you have problems with Windows Vista Service Pack 1.

    Let us see the following and see if they help you:

    Method 1: You can read the following article.

    How to fix the Windows Vista and Windows Server 2008 service pack installation issues:

    http://support.Microsoft.com/kb/947366

    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: You can also check the following items:

    Learn how to install Windows Vista Service Pack 1 (SP1)

    http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

    What you need to know before you install Service Pack 1 KB936330

    http://support.Microsoft.com/?kbid=936330

    Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

  • Vista - do I have to re - install Service pack 2?

    After a reinstall of Vista, I downloaded service pack 2. Set to automatic update asked draft.exe service pack 1. Both are in the history of the update installs successfully. When I check my system specs, it says that I am running service pack 1. McAfee, told me that their software will not work unless I am running service pack 2. DoI have to re - install service pack 2?

    Hello

    Yes, you have to re - install Service Pack 2.

    How to obtain the latest Windows Vista service pack
    http://support.Microsoft.com/kb/935791

    How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
    http://support.Microsoft.com/kb/947366

    Support for Vista Service Pack issues (after access of the page, you may have to refresh)
    https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1&wfxredirect=1&SD=GN

    Service Pack Center
    http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Problems installing Service packs after re intalations of windows xp home edition

    I recently reinstalled windows xp home edition, but I'm unable to download the necessary service packs and critical updates. Please can someone help me.  I tried to use control panel/sytem but nothing happens.  Please tell us how can I update mainly service packs. 1, 2, 3 as without these I have various problems it is upgrade from flash, internet explore Adobe, the list is long and please can someone urgently advise or help me. Thank you

    I recently reinstalled windows xp home edition, but I'm unable to download the necessary service packs and critical updates. Please can someone help me.  I tried to use control panel/sytem but nothing happens.  Please tell us how can I update mainly service packs. 1, 2, 3 as without these I have various problems it is upgrade from flash, internet explore Adobe, the list is long and please can someone urgently advise or help me. Thank you

    Refer to:
    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/how-can-i-get-Windows-Update-error-x8024400a/35ba7694-c9b2-4043-a4c0-777d4b7736dc

  • Toshiba satellite which is stuck in the installation of service Pack 1. I have service pack 2, can not fix with this cd, can I install service Pack 2 on it without loss of data or files?

    I have the laptop (Toshiba satellite) friend who's stuck in the installation of the service Pack 1.  I have service pack 2 and am wondering, since I can't fix with this cd, can I install service Pack 2 on it without loss of data or files?

    PC claims service pack1 cd with file asms

    When you use service pack 2 cd can not load product catalogues, it is fatal error, the Setup logs files should contain more information.

    Why not integrate Service Pack 2 and Service Pack 3 on her XP CD by following the instructions here (using another PC):

    http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/1443.aspx
    Copy all data on an external hard drive, do a clean install using the XP CD updated (preferably on the BIOs)
    Then, install the drivers from the system, then Microsoft Security Essentials, Windows 7 Firewall Control (XP free Version) and Malwarebytes' AntiMalware (free or Pro) or whatever you prefer security.
    Then copy the files over.
    This will probably lead to the best performance.
  • I am running Windows XP Home Edition Service Pack 3 (build) 2600 and have a lot of problems.

    Hi all

    I am running Windows XP Home Edition Service Pack 3 (build) 2600 and have loads and loads of problems. Windows keeps hung and everything I tried didn't seem to help.
    I brought this second hand from a company computer, I used to work and I don't have the original installation cd or rescue disk. I meet a lot of problems and everything takes forever to load and work. I was advised to run maleware, spyware, antivirus and defrag on the computer analyses and I did all that and nothing works. Also, when I tried to run the system restore it wouldn't let me, and when I try to run the scan disk after a reboot it does not work. As a last effort, I tried running SFC and it looked as if it was working, but then it asked me for the initial startup disk, that I don't have. so I tried to cancel it, but now every time that I reboot/restart my computer load SFC and I have to start the entire process. Also, none of my cd drives work. Please help me
    Also, I'm now a message that says minimum virtual memory is very low.
    I would be very grateful for any help or advice anyone can offer us on these issues. a million thanks in advance.
    bfchild

    Hello

    1 how long have you been faced with this problem?
    2. don't you make changes on the computer before this problem?
    3. what exactly happens when you try to run the scan disk or system restore? You receive an error message? If yes then after return the exact error message.

    No software XP, Microsoft no longer offers that you will need to make arrangements for windows XP windows installation CD. You can check the question in the clean boot state.

    From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

    Reference:
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
    1. click on start and then click Run.
    2. type msconfig and click OK.

    The System Configuration Utility dialog box appears.

    3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
    4. When prompted, click on restart to restart the computer.

    See also the following articles that may be useful.
    How to make a computer faster: 6 ways to speed up your PC
    http://www.Microsoft.com/atwork/maintenance/speed.aspx
    Slow PC? Optimize your computer for peak performance
    http://www.Microsoft.com/athome/Setup/optimize.aspx

  • I have an Apple Mac computer (about 2 years) and on many occasions I tried to install Service Pack 3 and every time it does not have enough space whne the system has a large empty space

    I have an Apple Mac computer (about 2 years) and on many occasions I tried to install Service Pack 3 and every time it does not have enough space whne the system has a large empty space

    Error message when you try to install XP Service Pack 3 on some Intel processor Apple computers, 'more space':

    http://support.Microsoft.com/kb/950716 MS - MVP - Elephant Boy computers - don't panic!

  • Vista Home basic - problem installing service pack

    My updates are horribly outdated and I try to install service pack 1 on Vista Home basic and receive an error - 0 x 80073712.  I tried microsoft tech people advised but are unable to install.  Can someone help me?

    Hello

    This problem may occur if one of the following conditions is true:

    • A program on your computer interfered with the installation of the service pack.
    • There is an inconsistency in the store of Windows services. The store Windows maintenance is a required component to install service packs.

    I suggest you try the steps from the following link:

    How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

    http://support.Microsoft.com/kb/947366

    Keep us updated on the status of the issue.

  • Error when installing Service Pack 2

    I recently reformatted my pc through its card reader has been corrupted reinstall readers have not solved the problem. Then I had to reformat the HARD drive, but then I had another problem.
    Could not install service pack 2. no error code was displayed and I don't know what to do.

    Hello kamal

    Please don t be crazy about me, but it's the right question for the forum of Microsoft. You didn t write which laptop model you have. Is this laptop plu or perhaps newer?

    Sorry, but without any laptop concrete and description of the problem, you should try the Forum of Microsoft. Maybe the forum users that Microsoft OS will be much better understood your problem.

    Good bye

  • Error installing Service Pack 3 on XP because of the "disk space" despite 40 GB free

    Well, I was working on the installation of some programs for my school (ProE Wildfire 4.0) and to run it, we required some software VSP. When you try to run the software, it gave me errors on missing components and when he tried to download, it gave an error. So I decided to do a Windows Update for I hope to solve this problem and tried to install Service Pack 3 (this a bootcamp partition on a Mac, unfortunately, everything works great on my desk), who was absent, probably because I installed XP only a few months ago. However, whenever I tried to install the service pack, it gives me an error, saying: it took 4 MB more disk and cancel the installation. I got 40 GB free, so I just did a virus scan of the entire system with Symantec and Spybot S & D. Then I made the error of disk checking, defragmentation, disk cleanup, cleanup with CCleaner and cleanup with CleanUp!. And he always gave me the same error. During this time, I realized that Microsoft Security Center was not picking up on my Symantec Antivirus. I had a virus earlier and thought that Spyware S & D and Symantec may have missed something, so I did some research and took measures to protect themselves against a little guy called backdoor.haxdoor.cn. Apparently, I was not according to HSfix and HijackThis. So I thought that Service Pack 2 might have poorly installed and messed up the Security Center and my chances of installation of Service Pack 3. But when I went into Add/Remove Programs (w / visible updates), I couldn't find the upgrade to Service Pack 2 anywhere, that brought me to believe he was present on the XP cd, I have installed since. So I tried to take a break for Service, removing the repository, and then by him restarting. That no longer works. So I gave up on the antivirus error causing the service pack 3 error idea and tried to do some research on service pack 3 generally, but I couldn't find anything really relevant. And now I don't know what to do anymore. Any help would be appreciated.

    silentearth3,
    Well, it sounds as if there are a lot of things with your computer.  The first thing I would say is to clean your system startup and then try runnings Windows updates.  Make sure you have any antivirus or firewall programs that may interfere with Windows Update.
    Here are the instructions for the clean boot: http://support.microsoft.com/default.aspx/kb/310353

    If you still have a question I would then download SP3 to your desktop and try to install from there.  Here are the instructions on how to manually install SP3: http://support.microsoft.com/kb/322389/

    Let us know the results of these steps.  Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • corresponding to the period of mounting clips & background in fcp 10.2.3?

    How to match the duration of the timeline and background clips in fcp 10.2.3

  • Portege 4000 conflict between WiFi and Bluetooth on Windows 2000

    I recently replaced XP with Win2000 on my Toshiba Portege 4000. I also downloaded the latest drivers from the Toshiba site, using pref to Win2000 and Portege 4000. When you start the Bluetooth Stack V4.00.30 he wiped out the wireless LAN feature. I k

  • Need XP disc for eMachines T3516A

    I have a new, but 6 years old, not registered emachines T3516 that was bought as a back-up.  I decided to save up for my daughter, but miss me the "operating system MS Windows XP Home Edition emachines disk".  eMachines have this disc.  I thought tha

  • Xperia U of ROOTING

    Hi guys I'm new here. just got my first Sony/Android mobile phone yesterday. I've read many threads on phone rooting android and other things, but still have questions. I hope someone here can help me out. 1. I removed all apps like mcafee, desktop,

  • 3750 X stack and question wccp ACNS Content Engine (CE)

    Hello I work with 3 3750Xs in a 'carrot' and we have a directly connected content engine (CE) on a WAE-612 CNSE ce612 - filtering 5.5.23.2 running web services. We use the wccp with forwarding L2 and L2 return with assignment of MASK. The this is loc