I have a problem in the program... Why does not work? :(

Similar Questions

• I have a Hp and the micro build does not work how to fix this?

  Can someone help me please? I have a HP T5800 and the micro build does not work how can I solve this problem?

  Hello

  Check with HP, their drivers support and documentation online and ask in the forums about known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ========

  It's probably the pilots who are responsible and who may not really be later or they need to be
  re-installed anyway. The best way is to manually review using the methods below.

  References to Vista also apply to Windows 7.
  
  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek High
  Audio definition (this is an example and you can have an other name/maker).

  Write the description and the model double click on it - tab drivers - write down
  Version. Now click on update drivers who cannot do anything as MS is far behind certifying
  drivers. Then CLICK RIGHT on it and UNINSTALL - REBOOT - this will rebuild the driver
  stack.

  You can have the default windows or a former certified pilot and it's all or part of the
  issue.

  Now, go to the site of the manufacturer of the system and get the latest Audio/Sound drivers - download - SAVE - go to
  where you put - right-click on Reboot - RUN AS ADMIN-

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
  and then install the latest version. Restart and check after each test, not
  rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
  installed shows upward on the tab of the driver.
  
  Go to the site of the manufacturer of the device, and then search for the even more recent drivers and install repeat
  operating mode. Download - SAVE - go to where you put them - click on - RUN AS
  ADMIN - Reboot

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (updated drivers manually using the methods above is)
  to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  The volume of the audio recorded by sound recorder in Windows Vista or in Windows 7 is less than
  in Windows XP (or Vista)
  http://support.Microsoft.com/kb/973446

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• the problem with the wi - fi does not work on windows 8.1

  Hello dear forum users (sorry for the English, use a translator)

  I have a laptop HP Pavilion dv6-7055er, 8.1 Windows 64-bit

  Card Broadcom WiFi 802.11b/g/n 1 x 1 4313GN worked on windows 7, but fails on windows 8.1. Tried to find the driver on the broadcom , but not found. Device Manager indicates that the problem with a PCI device. Specifies no problems with the Wi - Fi adapter.

  What could be the cause and how to fix it? Thank you!

  It seems that your WIFI adapter is not supported by Windows 8.1

  There are a few options available.

  The first and simplest is to purchase a USB wifi adapter to plug into one of the USB ports on the laptop. I have a dual ASUS USB-AC56 band that meets the 802.11ac specification.

  The second option will be to take a look at the installed optional wifi adapters to see if they have Windows 8.1 supports, buy one to replace the Broadcom card installed with.

  Ok. The two following adapters are compatible with your laptop and Windows 8.1. They have a BIOS support.

  The Qualcomm Atheros AR9485

  The Intel Centrino Advanced - N 6230 WLAN module

• Running Vista Home Premimum Service Pack 2. Why DEP now prevents Photoshop 7 launch when it still worked before? DEP to load the program exceptions does not work according to the instructions.

  Photoshop 7.0 version worked. Since the last round of updates, now DEP is prohibiting its launch. Following the instructions online to allow certain programs to be exempted from DEP is not no longer works. Program in the list do not use DEP profile but doesn't always open.

  Hello

  You can read these articles and check if that helps.

  Data Execution Prevention: Frequently asked questions: http://windows.microsoft.com/en-us/windows-vista/data-execution-prevention-frequently-asked-questions

  Change Data Execution Prevention settings: http://windows.microsoft.com/en-us/windows-vista/change-data-execution-prevention-settings

  What is Data Execution Prevention? : http://windows.microsoft.com/en-us/windows-vista/what-is-data-execution-prevention

  Why Windows close my program? : http://windows.microsoft.com/en-us/windows-vista/why-is-windows-closing-my-program

  Thank you.

• I have a problem with the Microsoft Fixit does not.

  Original title: MR FIX IT don't BLOODY STOP 2 DAYS now STILL Won't STOP

  I've got Mr fix it opens and it won't go away even after I run another he said nothing wrong, it is on win/7, he has recently installed explore 10 and I installed domalq to take a peek and I can't uninstall it keeps on asking I want to uninstall visual c when I try to get rid of it.

  I initially run on it to check for problems of slowness and, eventually, he did not mention an and it's happening all over the world know

  Hello

  You can ask your question in the Microsoft Fix it Center - NOT for general support questions: http://social.microsoft.com/Forums/en-US/fixitcenter/threads

  Thank you.

• I have a problem with the payment: (why charge me 44,99 EUR (cost 61.99 euros) then block system and I can't use the programs :(

  I have a problem with the payment why charge me 44,99 EUR (cost 61.99 euros) then block system and I can't use programs

  Please click Accounts & billing link here https://helpx.adobe.com/contact.html to have a conversation with our billing support team.

  Thank you

  Stéphane

• I have already uninstall the program but does not control panal icon

  I have already uninstall the program but does not control panal icon

  Hello

  Thanks for posting the request in the Microsoft community!
  Before troubleshooting, provide us with information.

  1 are. what program you referring?
  2. you receive an error message on the computer?

  You can try the solutions and check if the icons are removed from the control panel.

  Method 1:

  Run the fix it and check.
  http://support.Microsoft.com/mats/program_install_and_uninstall/

  Method 2:
  This could also be a problem with the virus. You can run a Microsoft security scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

  Method 3:

  If the previous step fails, check if it has all the facilities waiting on the computer using the registry.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see the link below.

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Empty registry key "InProgress".

  Check the following registry key:

  HKLM\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress

  Empty/rename "PendingFileRenameOperations" registry key

  Check the following registry key:

  HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\PendingFileRenameOperations

  Just reply with the results. I'd be happy to help you more

• When I enter a Web site in the url of the Enter key does not work. I have to click on the arrow at the end of the line. Is this a configuration problem?

  The Enter key does not work in the line of the URL. If I go says:
  www.Bing.com
  and then press the Enter key, nothing happens.
  I have to click the arrow at the end of the field in order to activate the link.
  If I am anywhere else on any page the Enter key works as it should.

  Please click the button of resolved next to the answer that solved your problem of Firefox support, when you are connected.

• The text on the Windows Paint program icon does not work

  I use Vista and do not know if this is the reason why the text icon does not work. All other icons work. Any ideas on how to solve this problem?

  Hi bipsvic,

  Since when are you facing this problem?
  If it works well before?

  I suggest that you want to run the file system (CFS) Checker scan that might help you to solve the issue.
  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  3. at the command prompt, the following line, and then press ENTER:
   sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved. If the problem you are experiencing is not resolved, use the procedure that is described in the section "the System Restore tool.

  Follow the instructions in the link below for more information on scan SFC.
  http://support.Microsoft.com/kb/936212/

  Check whether the problem is resolved.

  If this does not work, you can try to create the new user account by following the instructions in the link below and check if it works.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• I have Adobe Lightroom installed on 2 computers. One works perfectly. On the other machine, the adjustment brush does not work.

  I have Adobe Lightroom installed on 2 computers. 1 works perfectly. On the other machine, the adjustment brush does not work. You can hear the fans in the Gallery of the computer up as if he is trying to work. All the other features do not work. I uninstalled and reinstalled Lightroom cc, but this does not solve the problem. Both computers are running windows 7 Professional 64-bit

  Hi Marc,

  Suggest you to reset preferences in Lightroom and then check out.

  Refer to this article: to zero (or "Screw up") the preferences of Lightroom - Lightroom Forums file

  Kind regards

  Claes

• Why the object_not_found exception does not work?

  Posters,
  
  I have the following statement in a package.procedure:
  
  -- (...)
  Start
  
  Select dbms_metadata.get_dependent_ddl ('INDEX', 'OWNER', sTableName)
  in the cDDL - clob for index DDL
  of the double
  -- (...)
  
  exception
  When dbms_metadata.object_not_found then
  null;
  
  end;
  -- (...)
  
  Execution is stopped in the select, not enter the exception and the following message is displayed in PL/SQL Developer MicroHelp:
  
  + "ORA-31608: specified object type INDEX not found." + "
  
  I did it another way by adding the following clause:
  
  -- (...)
  Start
  
  Select dbms_metadata.get_dependent_ddl ('INDEX', 'OWNER', sTableName)
  in the cDDL - clob for index DDL
  of the double
  where exists (select 1+)
  of all_indexes+.
  where table_owner = 'OWNER'+.
  and table_name = sTableName); +
  -- (...)
  
  exception
  + When no_data_found then +.
  null;
  
  end;
  -- (...)
  
  It works, but: why the object_not_found exception does not work?
  
  Thanks in advance for everyone!
  Philips

  Oh I just noticed:

  What happens if instead of this:

  Select dbms_metadata.get_dependent_ddl ('INDEX', 'OWNER', sTableName)
  in the cDDL - clob for index DDL
  of the double

  you say:

  cDDL: = dbms_metadata.get_dependent_ddl ('INDEX', 'OWNER', sTableName);

  ?

• Question of Safari and Chrome. indicates on the navigation screen. "An element of the Protection of the family filter does not work as expected. Restart your computer. If the problem persists, contact support.  Error: failed to hose CPI. »

  Question of Safari and Chrome. indicates on the navigation screen. "An element of the Protection of the family filter does not work as expected. Restart your computer. If the problem persists, contact support.  Error: failed to hose CPI. »

  Quit Safari, Chrome to quit smoking. If necessary Forcequit.

  Start Safari while holding the SHIFT key, select the menu Safari ClearHistory, then after this check that the homepage is the one you want.

  Do the same for Chrome.

  Close all browsers, restart the mac.

• I have a Toshiba satellite L455D laptop and the touch pad does not work

  If I plug my usb wireless mouse that works, but when I unplug it the touch pad does not work

  Have you checked to see if your laptop model has a physical button around the mouse pad that allows & turns off?  If it does not, many cell phones often have a software switch that can toggle the on & off power mouse pad.  It is usually triggered by a combination of function keys (key Fn + one of the F1 to F12 keys).

  Take a close look at the row of the top of your keyboard and see if you can find a key that has a small symbol that looks like a mouse pad.  If you find one, try pressing it in combination with your Fn key to see if your mouse pad features returns.

• No matter what I try to play, I get this message, "Windows Media Player has encountered a problem while playing the file." And the media player does not work

  Windows Media Player

  No matter what I try to play, I get this message, "Windows Media Player has encountered a problem while playing the file."  And the media player does not work

  Reset the WMP.

  Step by step instructions are given here: -.

  http://www.mydigitallife.info/how-to-uninstall-and-re-install-Windows-Media-Player-12-WMP12-in-Windows-7/

• Connection problem: The DHCP service does not work.

  Original title: connection problem

  After got rid of a virus, my computer is always trying to get the network address. I found that the DHCP service does not work on my computer. How can I reinstall. I am running windows xp service pack 3

  Hello

  Follow these steps and check if they help.

  Step 1:

  Look for the DHCP Client service and DNS Client Services if they are started.

  a. Click Start.
  b. click on run and type Services.
  c. click right on - run as administrator.

  Check if the below mentioned services has mentioned State and type start.

  Client DHCP started Automatic\Manual.
  Client DNS started Automatic\Manual.

  Also check the dependency that are required for the DHCP Client services and DNS Client Service runs.

  To verify that double-click the service, and click the Dependencies tab.

  Step 2:

  I suggest you to reset TCP/IP settings to solve the problem.

  How to reset the Protocol Internet (TCP/IP)