I have a problem in the use of 'DAQassistant '.
Hello world. I am a new learner to labview and China. When I use labview 2014 and DAQassistant with advantech USB4750, it will display ´error-536805376· "¢ Euou ToErrorCluster.vi ' and 'Get a unique temporary file name.' I reinstalled times serval labview and win7, but it still has the same problem (initially, I work well., but finally it did not work sorry for my english.and happy Chinese new year to all.
a version of this tool also have problem then try using a different version of the
Tags: NI Software
Similar Questions
-
I have a problem with the use of bluetooth.
I am not able to Bluetooth on my pc in pc settings it shows a blurry icon and is not able to click on it?
How do I on bluetoothMandeep Hello,
1. is your Bluetooth device detected on the computer?
2. What is the brand and model of the Bluetooth device?
3. have you checked if the Bluetooth device is compatible with Windows 8.1?Method 1: Check if your Bluetooth Support Service status is started in the services:
1. press Windows key + X key together on the keyboard.
2. Select run.
3. in command type "services.msc" without the quotes, and then click OK.
4 search for the Service of Support of Bluetooth and click on it to check the status that appears on the left side of the services window.
5. If the Service is not started, click right on Bluetooth Support Service.
6. click on start.
Method 2: I suggest you follow the link which explains everything below:
Why isn't Windows find my Bluetooth or other wireless device?
http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-deviceHope this helps, reply with the status of the question for any further assistance. -
I have a problem with the history of Bing. I clear the history and turn it off. Later, when I use bing history is preserved and turns. How can I keep decommissioned and erased history? What a Bing, IE8, Microsoft problem?
Hello
1. is the question confined to the history of Bing?
2. what web browser do you use?
3. If you are using Internet Explorer, which r version of Internet Exploreris installed?
If you are using Internet Explorer 8, it gives you the option to automatically remove your browsing history each time you quit the browser. The type of data that is deleted is dependent on of which options are checked in the delete browsing history.
one) to set up IE to delete browsing history on exit first click on the Tools menu, located to the far right of the tab of your browser bar.
(b) when the drop down menu appears, select Internet Options.
(c) click the menu Security , located to the far right of the tab of your browser bar. When the drop down menu appears, select the option delete browsing history... .
(d) the window delete the browsing history should now be visible coming to overlap your main browser window.
(e) check the options you want to remove and click OK.
-
I have a problem with the payment why charge me 44,99 EUR (cost 61.99 euros) then block system and I can't use programs
Please click Accounts & billing link here https://helpx.adobe.com/contact.html to have a conversation with our billing support team.
Thank you
Stéphane
-
I have a problem with the installation of ADOBE ILLUSTRATOR using creative cloud. It gives me:
Exit code: 117
-------------------------------------- Summary --------------------------------------
-fatal error 2, 0 error (s), 0 warning (s)
FATAL: Fatal Error ' 117' occurred in download
FATAL: An error has occurred in the download package (name: AdobeIllustrator19-Core Version: 19.2.0.111). Error code: '117'
-------------------------------------------------------------------------------------
N ° 1)
Click on the below link, Sign In and open Photoshop Elements download link.
Do not close the page, just keep it open.
https://www.Adobe.com/cfusion/TDRC/index.cfm?product=photoshop_elements
Note: * If we do not keep the page of items in Photoshop, we will have access denied error message when file downloading install direct.
Then click on the link below and download the installer directly mentioned in step 2.
Step 2)
http://prodesigntools.com/trials3/AdobeProducts/ILST/19/Win64/Illustrator_19_LS20_win64.7z
Step 3)
Unzip the installer using 7zip or winrar and then install the product.
-
Since I load Acrobat Reader DC, when I try to save the document, word to PDF, the pdf file pages are cut on the width. I use Microsoft Office Word 2007 and I have no problem with the previous version of Adobe Reader. Should what settings I adjust?
Hi judithl34724699,
If you want to convert Word files to PDF with the Adobe Reader application then it is possible with the service Pack of PDF. Try to use the service on the web: https://cloud.acrobat.com/convertpdf
Also try to use a different file type.
Thank you
Abhishek
-
Hello.
I have a problem with the content of spam. Somewhere in the Fox appeared script that's choking me audio spam. Every 30 minutes he's playing an audio clip that is malicious. I can't find the settings as it eliminated. Now, I don't have any plug-ins and Add-ons strange that were not initially in the Fox, but the problem is there.
I use the Fox years. The problem, he had 1.5 months after Fox cleaning. If the problem can't win, I'll be forced to give up the browser, and I wouldn't.Could test you mode without failure of Firefox? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.
Does not work if Firefox: Hold down the SHIFT key when you start Firefox.
If Firefox is running: You can restart Firefox in Mode safe mode using either:
- button "3-bar" menu > "?" button > restart with disabled modules
- Help menu > restart with disabled modules
and OK reboot.
Two scenarios: A small dialog box should appear. Click on 'Start mode safe' (not update).
Any improvement?
If the problem persists in Mode without failure, could reinstall you Firefox in this way:
Clean reinstall it
We use this name, but it isn't about deleting your settings, this is to ensure that the program, files are clean (not incompatible, corrupt or exotic code files). As described below, this process does not disrupt your existing settings. Don't uninstall NOT Firefox, that does not need.
(1) download a fresh Installer for Firefox 38.0.5 of https://www.mozilla.org/firefox/all/ in an ideal location. (Scroll down your preferred language).
(2) close Firefox (if applicable).
(3) to rename the program folder, either:
(Windows 64-bit folder names)
C:\Program Files (x86)\Mozilla Firefox
TO
C:\Program Files (x86)\OldFirefox
(Windows 32-bit folder names)
C:\Program Files\Mozilla Firefox
TO
C:\Program Files\OldFirefox
(4) run the installer you downloaded in the #1. It should automatically connect to your existing settings.
Any improvement?
Note: Some plugins can only exist in this OldFirefox file. If it is missing something essential, present in these files:
- \OldFirefox\Plugins
- \OldFirefox\browser\plugins
-
Problem with the use of MID/LEFT functions
I have a problem, see the point of these functions if (as seems to be the case) they will not allow another cell to be referenced.
I want to do a SUMIFS with match being the first four characters of another cell data. I can't find any way to do it without manually copying the first four characters in another cell.
If I use only LEFT like this:
LEFT ('ABCD', 3) to derive 'ABC '.
so why would just enter ABC in the first place? But that's what show examples and any attempt to do what I really want
that is LEFT (F19: 3)
causes a syntax error.
I believe that I'm missing something really stupid, but I'm darn if I can see it.
Hi jon,
LEFT (F19: 3)
causes a syntax error.
Try a comma in place of the colon
= LEFT(B2,3)
It's your area used for the decimal point. If you use the comma for decimals, use a semicolon in the formula, = LEFT(B2;3)
Kind regards
Ian.
-
Hello.. Please I have a problem regarding the extensions library folder... I eccidentally deleted all the stuff in this folder and then I restarted my mac. His picture and it does not start... What have I done? I can somehow it repair? Sound on the screen to restart 2 hours... Thank you
You must wipe the drive and reinstall OS X. In the future, you need to stay away from the data in the system until you know what it is and the consequences of the removal.
Install or reinstall OS X from scratch
Make sure that you have backed up your files because the following procedure will remove all of the hard drive.
HD recovery start:
Restart the computer after the ring, press in and hold the COMMAND and R keys until the menu screen to appear.
Erase the drive:
1. select in the main menu disk utility and click on the continue button.
2. once the charges of THE select your boot volume (usually Macintosh HD) in the
list on the left. Click on the Erase tab in the main window of THE.
3. set the type of format Mac OS extended (journaled). If necessary, click
Security and button all the option data from scratch in a single pass. Click
the clear button and wait until the process is complete.
4 leave FROM and return to the main menu.
Reinstall OS X: Select reinstall OS X and click on the install button.
Note : You will need an active Internet connection. I suggest to use Ethernet if possible
because it is three times faster than wireless.
This should install the version of Mac OS X that you had installed it.
-
How can you check if you have a problem with the ghost attack
How can you check if you have a problem with the ghost attack.
My ISP (Virgin) sent me a letter saying I could have an attack on my apps by the phantom virus.
How is this true and what can do
The XcodeGhost malware affects the apps, mainly Chinese, created using a red version of Xcode. It is not a 'virus '. (Look at the difference between computer viruses and malware). Remove the Apple listed here and get updated with the latest versions of the App Store.
-
I have a problem with the simulation in Matlab 6.5 and LabVIEW for PID controllers
I have a problem with the simulation in Matlab 6.5 and LabVIEW. I have a few methods for granting regulators PID in MATLAB to go but not of LabVIEW. Degree of international teams of two transfer but when I passed to the fourth degree is no longer working. We have changed the formula to calculate the parameters for the fourth year and gave me some good values for assignment of Matlab, but when I put on LabVIEW are not resolved. the formulas are available in PDF format and are. Please help me and me someone if possible. Thank you
Lim.4 generation in comparison methods and the MATLAB program settings are for the service of transfer to the second degree.Hello Lascarica,
I noticed that you are using the screw of PID. Gains on these screws are based on TIME instead of GAIN. You should be able to build a PID regulator and vary the gains and then compare the results.
-
Hello! I have a problem with the #2 Microsoft tun miniport adapter. It cannot start. FileVersion pilot because it is 6.0.6001.18000 (longhorn_rtm 080118-1840). I have a problem because my internet is not working because of the adapter, so I'm not able to use your forum solutions requesting that my internet is working. So, can you give me some advice on how to deal with this problem.
Hello
Refer to the answer posted by Sabrina Shen in the following link to resolve the problem:
See also:
-
I'm AT & T PACE router connected to Internet. However, I have a problem connecting the Netgear model No. RPV3000 Extender. So I can not see my network_EXT computer and therefore cannot link to this Netgear. I tried to use another network with the name of my network_ext and provide the same passkey that my router, but it was impossible to connect to the Extender.
I would appreciate it, if I can get any suggestion/help to bind and connect to this extension of NETGear. I have WIndow7 system on my computer.
Thank you
Harshad João
First, make sure that the netgear device is not a router. An Extender is very good. You can't have more than one router in a network. Also make sure that if you use the router wireless integrated into your modem, the router ONLY in use.
There is a very specific configuration for the Extender. It should have come with detailed instructions. If you can't find them, call Netgear for assistance.
-
I have a problem with the cursor on the computer.
Original title: How can I stop this? When I click on a window to make it active, he admits that as a real click click and move the cursor on the page. Windows 7 pro
Windows 7 pro 6.1
I do web development on several screens with multiple applications open at the same time. When I want to use a program that is on my second monitor I click it to make it active. This click has also acts as a true clicks and moves the cursor on the page. This can be very annoying because whenever I want to spend the programs I mouse over a sidebar of this application or try to click exactly where my cursor is in the document.
Looks like a trivial question, but through the course of a day it gets very boring very quickly. I don't remember that it works this way in older versions of windows, and I hope that there is a way to fix it. What I would like is the first click on an app just make active in order to quickly click the apllication anywhere and start typing there where I left.
Hi Vanamp,
Thanks for posting your question in the Microsoft Community forums.
I see from the description of the problem, you have a problem with the click of the mouse to activate a window.
I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
To provide the proper resolution, that I would need more information on your side.
This problem occurs only with a particular application?
This problem can occur if the mouse settings are poorly positioned.
I suggest you try the procedure described in the article and see if it helps.
Change the settings of the mouse
http://Windows.Microsoft.com/is-is/Windows7/change-mouse-settingsCheck out the link for more information.
Make the mouse easier to use
http://Windows.Microsoft.com/en-in/Windows7/make-the-mouse-easier-to-useLet us know the status of the issue after you perform the troubleshooting steps. If you need help or information about the issue with the mouse settings, I'll be happy to help you. We, at tender Microsoft to excellence.
-
I have a problem with the Narrator, repeating words and phrases.
original title: NARRATOR in WIN7 SUPPORT
I use windows7. The annoying Narrator sometimes voices repeat words and phrases. I also need help, change of voice and using Narrator to read aloud my text book I downloaded. It is in PDF format.
Original title: Narrator sometimes repeat words and phrases
Hello
Thanks for posting your query in the Microsoft Community.
You have a problem with the Narrator, repeat words and phrases. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.
Please answer these questions-
(1) exactly where you run the Narrator?
(2) the Narrator extends from a particular document?
(3) have you made changes on the computer before the show?
I would like more information about the issue.
Method-
I wish that return you the items for assistance-
Narrator doesn't read what I expect him
http://Windows.Microsoft.com/en-us/Windows7/Narrator-doesn
Hear text read aloud with Narrator
http://Windows.Microsoft.com/en-us/Windows7/hear-text-read-aloud-with-Narrator
Let us know if you need assistance regarding the issue. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.
Thank you.
Maybe you are looking for
-
When the pages load, freezing unless I move the mouse
He took me to always happen. I always have to move the mouse to get the computer to do anything.
-
My monitor is 90 degrees to the right
My monitor looks like 90 degrees to the right.How can I fix?
-
HP Office jet 6700: disabled network HP office jet printer capabilities
Please help, my Hp office jet printer will not conect to internet it says the built in network capacity have been disabled and contact the network administrator
-
Family Tree Maker no longer supports this version, but I don't want to upgrade to a new complex program. Do a search, I found a page of FTM, who explained that the program needs a set of files to display and manipulate images. These files are suppo
-
Hello I am Setup VN-Link in HW to UCS and wondered what the HOST IO NETWORK PERFORMANCE in Port profile properties mean. The options are 'None' and 'High Performance'. I found no information on such a feature. I know that VN-Link in HW improves the p