I have a problem, try to uninstall the ask toolbar. get the error message: cannot access the VB script... need help please
I have a problem, try to uninstall the ask toolbar. get the error message: unable to access the VB script... need help
Hello
How do you try to uninstall the toolbar?
I would suggest trying the following methods and check if it helps.
Method 1:
Try the steps in the following Microsoft article and check if it helps.
How to fix script errors in Internet Explorer on Windows computers:
http://support.Microsoft.com/kb/308260
Correction of errors in Internet Explorer: http://support.microsoft.com/kb/822521
Method 2:
Try to uninstall the toolbar, programs and features and check if it helps.
Uninstall or change a program:
http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
Hope the information is useful.
Tags: Windows
Similar Questions
-
When I try to uninstall a program I get an error message indicating the module not found
I followed the correct steps to uninstall programs, but it seems that I'm looking for a program file that does not work or does not exist,
Hello
you do not tell the name of the program or the exact error message
Try this free version of revouninstaller
http://www.revouninstaller.com/revo_uninstaller_free_download.html
or reinstall it and then uninstall it.
-
I have a problem after installing, I try to open applications, but I get an error message: "it is impossible to open it properly (0 x 0000022) application, click ok to close the application" anyone of you could help me? I paid the monthly rate but I can not use any application due to this error
Hello
This link may help: the application failed to start properly (0xc0000022).-Microsoft Community
Kind regards
Sheena
-
Original title: could not start the Service "Windows Defender" (WINDEFEND)
When you try to install Windows Defender, I get an error message that
"Service"Windows Defender"(WINDEFEND) was able to start. Make sure you have sufficient privileges to start system services.
How can I check which privileges I have and I need?
I noticed in the management of the tasks that Norton symlcsvc.exe ran and I was wondering if it was who collide with the Defender, so I temporarily stopped Symantec process running in the field of Services, but still had the same result, try to run the installation of the Defender.
Help please
Hello
This error message is because you have Norton installed on the computer. See the for more information section below.
http://www.Symantec.com/business/support/index?page=content&ID=TECH103119&locale=en_USLet's try the steps and check them off below if it helps.
Step 1: You can try to uninstall Norton and then check if the problem persists.
Note: Reinstall Norton after verification.
Reference: http://support.microsoft.com/kb/307895Step 2: Change the registry value and check.
a. Click Start, type regedit.exe and press ENTER.
b. navigate to the following location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Defender\
c. right-click on DisableAntiSpyware, on the right panel, then selectEdit.
d. enter 0, under value data, and click on the OK button.
e. close the registry editor.
f. restart the computer.Registry warning:
Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756
Thanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
access denied for the creation of a directory
When you try to install PDF Creator, I get an error message: "error 5 - failed to create the directory, access is denied." How can I fix this?When you try to install PDF Creator, I get an error message: "error 5 - failed to create the directory, access is denied." How can I fix this?
Only when you try to install this application?
What about BullZIP PDF Printer?
(You can uninstall - trying to figure out if it's a problem of Windows or the question of enforcement.)
-
Hi I am a newbie for windows 7 and a kind of desire, I was still with windows xp! It is simpler and much easier to use "I tried to start Windows defender (which I am informed is included in my Vista) but every time I try to turn it on I get an error message informing me then Defender is stopped, but if I restart my computer it automatically lights Defender..." but this does not happen, I use Mcafee site advisor "could you please tell me if there is any chance that's causing the problem?"
Hey JoanneWatson,
Because this thread was started by someone else, and the age of the son, I suggest that you follow the link below to start your own thread.Ask your own question, helping the community help you specifically to your question. Don't forget to include all the details (your version of windows, your system specifications, any error codes etc.) that you can when you start your own thread.Thanks for posting on the Microsoft Answers JoanneWatson site! -
I just got my 14 mailed items. I have NO card or anything else. I can't install it following the instructions online. I have no codes or numbers except the bar code. Help, please.
Hello
You can search the Redemption Code that would be a 24 digit alphanumeric code, you may have received or will need to get to the place where you buy first or Photoshop elements 14 and can access the following link to get the instructions to use the code to get the series license key to activate the product.
If you're still having problems getting the series license key, you can contact Adobe customer service to get the license key of series.
You can also access the following link to download installers for first 14 elements or Photoshop elements 14 accordingly.
Download Adobe Premiere Elements 14, 10, 11, 12, 13
Download Photoshop Elements | 10, 12, 14, 11, 13
Thank you.
-
I tried to download the creative cloud and it didn't download correctly (after a long time) and now I can't uninstall it. It takes place on my computer but I cannot uninstall the Adobe application. Help please!
Hi Julie,.
Please see the below help document to uninstall the application:
Using creative cloud | Download, install, update or uninstall applications
Otherwise, you can use the CC cleaning tool as well.
Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6
Kind regards
Sheena
-
I try to capture a Web page using the Acrobat "Convert" icon, but this no longer works. I get an error message: "no access to Acrobat WebCapture. Acrobat is posibly busy or waiting for input. »
Thanks Abhishek,
already, this option was unckecked. But miraculously it works now (after spending hours trying...).
Beste, Geert
-
Problem loading swf on the page-desperately need help html.
I recently made a website (www.doneanddone.co.nz) that has two sovereign wealth funds on him. The first is a sound swf that works perfectly, but my another swf is a video swf that runs again and again does not appear now, I have loaded on my host.
I just get this error message-
SecurityError: Error #2148: SWF file http://www.doneanddone.co.nz/images/kissCouple.swf cannot access local resource C:\Users\Frazer\Desktop\
Files\iStock_000011299333Small Office We.mp4. Only SWF files local local - with system files and trust can access local resources.
at flash.net::NetStream/play()
to fl.video::VideoPlayer /http://www.adobe.com/2007/flash/flvplayback/internal::_play()
to fl.video::VideoPlayer /http://www.adobe.com/2007/flash/flvplayback/internal::_setUpStream()
to fl.video::VideoPlayer /http://www.adobe.com/2007/flash/flvplayback/internal::_load()
at fl.video::VideoPlayer/load()
at fl.video::FLVPlayback/doContentPathConnect()I did my swf using the video import wizard and adding an actionscript loop.Could someone help me?In the fla file, there must be sonething that is encoded in order to call this address. You must go through the code in the file and find it. If you used a FLVPlayer, check the \parameters put in place for this in the properties panel.
-
Whenever I try to load a program I get an error message
Whenever I try to load a program I get an error message / is not a valid bencoding, how can I stop this
original title: cannot load programs.Hello
- What is the name of the programs/Applications you are trying to install?
- Is the issue limited to a particular application or occurs with any application you are trying to install?
- What the exact error / message code you receive while trying to load?
- What antivirus do you use?
- You did it all changes to the computer before this problem?
Method 1: Resolution of problems running the program:
Open the troubleshoot program compatibility utility
http://Windows.Microsoft.com/en-AU/Windows7/open-the-program-compatibility-Troubleshooter
Method 2: We can use approach 50 / 50 to narrow down the root cause of the problem.
See the article below for instructions on how to start your computer in a clean boot state.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
Method 2: Click the link below to provide newspapers:
What are the information contained in the logs of the event (Event Viewer)?
http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
Reference:
Solve problems with programs that cannot be installed or uninstalled
http://support.Microsoft.com/mats/Program_Install_and_Uninstall/
It will be useful.
-
Issue of Windows install
I just bought a HP Photosmart printer and I am trying to install the software on my computer. (OS is Windows Vista.) When I try to install my software, I get an error message that "Windows Installer could not be accessed". I ran "msconfig" and found that the Modual from Windows Installer status is stopped. How should I proceed?
Thank you, Jeanne Vecere
You could try to go to the MICROSOFT website, go to KNOWLAGE database and in the search bar, try the search for WINDOWS INSTALLER. Look for any version that is newer than the one you have. If this fails, try searching on GOOGLE. You can also try to do an update to WINDOWS VISTA.
IF YOU ARE RUNNING 64-BIT WINDOWS, MAKE SURE YOU PRINTER WORKS WITH 64-BIT.
-
original title: PSHED.dll
Whenever I try to charge my laptop I get an error message saying: file: PSHED.dll status: 0xc0000098 Info: windows failed to load because a required file is missing or corrupt. and I lost my original disc to repair.
I believe that this has happened after I tried to update my windows update system.Hello
You can run file system analysis checker and see if the problem still persists.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
-
When I try to rename a folder in Windows 7 I get this error message: "the action cannot be completed because the folder or file is open in another program. Close the folder and try again. "Can anyone help?
I gave up and solved the problem by buying a third party software to use as a directory, Directory Opus. It is much more functional than the Microsoft Directory and I have never problem renaming of files. I am just amazed that so many people have this problem and Microsoft has not fixed.
-
Have noticed that my history of visited web sites is saved is more and the error message above appears whenever I start my laptop, I tried to download ie9 instead of run the ie8 I have, he (ie9) is not installed. I have also tried to use the repair and fix the items, but they don't work anymore. can anyone help? TY
Hi John,.
(1) how long have you encountered this problem?
(2) what is the complete error message you receive at startup?
(3) do you get an error message when you try to install Internet Explorer (IE)?
(4) are what patches you referring? What happens when you try to invoke?
Method 1: Put the computer to boot and then check if the problem persists
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
Continue with the remaining steps to pin-point on the third party service.
After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 3:
You can see the steps by Afzal T and Azeez N in the links below to solve problem of navigation history
Maybe you are looking for
-
How to recover lost photos?
Hello Recently, I got my iphone 5 after it said connect to itunes after having tried to write in my access code. I could not access my phone with password so I decided to put it in recovery mode. But I forgot to save pictures and other content in bot
-
"Allow the installation of an extension" popup is not displayed
I just installed Firefox 13 on my new laptop, and I try to install lastpass on their site so I chose Windows and I click on the button "Download" in firefox, and I don't get the usual pop-up asking me if I'm hosting the installation of this extension
-
HP Photosmart C4795 did everything BUT copy
HP Photosmart C4795 - less than 2 months old - worked fine 2 days ago. Nothing has been installed or changed my mobile during this period. Analysis PC - work Prints from PC - work (color, p.c.) Copy - does not work I hit "Copy" on the touch screen T
-
HP Envy 7640: Error 1224 and error 1726 failure Port Discovery
Hello I tried to install the driver for my printer after I upgraded to 10 Windows, but so far without success. I tried all methods I found mentioned in this forum. I first tried to install the driver full features software directly. I got error 172
-
'Create a Subvi' movements labels (LV2013) IMAQ image controls
Hello I noticed a strange behavior in LV2013 (x 64 and x 86) what SubVIs creation from a selection containing Image IMAQ son: The labels out of place of obtained characteristics Subvi on IMAQ controls/indicators, see the illustration below. This VI i