I have a problem with ITunes running in compatibility mode for Windows XP on a Windows 7 computer.

Similar Questions

• Hi, I have a problem with finding drivers - PCI SOUNDPRO CMI8330 for Windows XP SP2, it is a Pentium1 old computer motherboard, but put up-to-date sound card is integrated... Everyting works well, but there is no sound on speakers? __

  P1 with hardware Ram A - max 128 MB Seagate HD 8, 4 GB memory card mother TXProII
  its an old model but there is no sound... Windows XP Professional...

  Disable the onboard sound from the BIOS and throw them into a basic PCI sound card that comes with the drivers. A basic PCI sound can be had for under $ $20. MS - MVP - Elephant Boy computers - don't panic!

• Problem with uninstalling the Toshiba Bluetooth Stack for Windows

  Guys, I have a problem with uninstalling the Toshiba Bluetooth Stack for Windows v4.00.22 on my laptop Windows XP SP2. Whenever I choose to remove the "battery Bluetooth for Windows by Toshiba" (or "Bluetooth HID Switch Service") the installation program starts to prepare, but crashes after a few minutes - the only way to continue is to turn off the laptop.

  The same thing happens when I try to update the stack to the latest version - the installer says that the old battery has to be removed first and crashes after trying to remove it. So is it possible to remove it by hand? I really don't want to reinstall Windows!

  I don't have a copy of the original Software v4.00.22 to recharge so if you have a copy or know where I can get a copy I would gratefully

  Thanks in advance.

  I would try to delete the folder: "C:\Program Files Toshiba Stack.
  Registry settings will remain, but should be repaired after a new installation of the Bluetooth stack.

• Asslam o aliakum. I have a problem with itunes 12.3.2 it is not downloaded the 10 windows and when I connect m iphone with itunes and want to update to 9.2 says please download itunes new version for ios 9.2... help me with this... How to solve this probl

  Asslam o aliakum. I have a problem with itunes 12.3.2 it is not downloaded the 10 windows and when I connect m iphone with itunes and want to update to 9.2 says please download itunes new version for ios 9.2... help me with this... How to solve this problem.

  Greetings Dani56777,

  Thank you for using communities Support from Apple!

  I understand that you run Windows 10 and you must update iTunes to the latest version so that your iPhone will be recognized when connected. I do not know if you receive an error when you try to update iTunes or not.

  If you need information on how to update iTunes, please follow the instructions in the following link.

  Download the latest version of iTunes for Windows - Apple Support

  If you receive an error or alert, you can consider removing iTunes and all of its associated components and then reinstalling fresh iTunes on your computer. That would give you the latest version of iTunes. If you need execute this process, please follow the steps described in the following article.

  Remove iTunes Control Panel and its associated components

  Use the control panel to uninstall iTunes and software components in the following order:

  1. iTunes
  2. Apple Software Update
  3. Apple Mobile Device Support
  4. Hello
  5. Apple Application Support 32-bit
  6. Apple Application Support 64-bit

  On some systems, iTunes can install two versions of the Apple Application Support. What is expected. If both are present, do not forget to uninstall both versions.

  Do these elements in a different order, uninstall or uninstall only some of them. This could have unintended effects. After you uninstall a component, you may be asked to restart your computer. Wait to restart your computer until you finish remove all components.

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

  Have a great day!

• I have a problem with the DVD drive not detected on Windows 7.

  I built a new PC (I've built a few of them).  This time is not considered my ASUS BD player with Windows 7 DVD burner.  It is not in either Device Manager just do not at all recognized.  The BIOS for the ASUS P9X79 of luxury see the SATA drive without problem.  Sometimes after restarting the BD Player looks and functions perfectly, but when the computer goes to sleep or shuts down is usually not there when it is restarted.  Please help me solve this problem :-)

  Original title: optical drive not recognized...

  Hello

  Please contact the Microsoft Community.

  You have a problem with the driver DVD being missing on the computer. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) that you get an error message or error code?

  (2) did you have performed the steps in troubleshooting?

  (3) have you made changes on the computer before the show?

  I would like more information about the issue.

  Method 1-

  I wish that you are running the fixit-

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2-

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
  Back up the registry - http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  I would have you look at the article-

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116#top

  Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.

• I have connection problems with Skype video chat (Internet Explorer 8 - Windows XP pro). What I haveto do to fix this?

  I have connection problems with Skype video chat (IE 8 - XP pro.) What should I do to correct this?

  Hello

  go to skype.com and make sure you have the latest version of their software.

  Kind regards.

• I have a problem with recording a music file to the Windows Media Player library.

  When I download music on the internet, it automatically records the music in windows media player but I have problems with the 2 files that are not in the library, I deleted and redownloaded them even tried to play them they played, but not added to the library. What should I do?

  Hi Henry,.

  Thank you for keeping us posted and I apologize for the delay in the reponding to you.

  You get an error message or error code?

  What is the format of the file music?

  I'd like to run this fixit-

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

  Let us know if it works for you.

• I have a problem with Realtek HD Audio output devices. Windows XP Professional SP2 operating system.

  My speakers worked fine for two years, since I bought a laptop. I was connected to the Internet recently and my brother was cleaning my computer against malware with Avast. Since then, my occasionally speakers have not worked. I used the cd that I got with a high tower, reinstal drivers for the audio device and it worked, my speakers worked again. But sometimes, not all the time, when I turn on the computer for my speakers do not work. Again, I insert the cd with the drivers and speakers will highlight function, until next time, when this problem is repeated. I don't know if my brother may had deleted files while scaning my computer with Avast, because he found a few malwars - win 32 I have a Trojan horse.

  Search for files in which pilots must be, but I think that I have not found some of them. Is that possible, I ask that the speakers are working somentimes?

  If please answer me if you know what is causing this problem and how can we challenge. Thank you!

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Problem with the security sysytems update KB3110329 for Windows 7 64 x-based

  Microsoft is aware of this problem with security update KB3110329 for Windows 7 x 64 systems? Have they fixed it? Thanks to John Butler to isolate the problem of configuration updates from January 12, 2016.

  Bill Blair

  Dear Jayant Gupta,

  Thank you for your response. When I tried to install the updates from 12 January 2016 on my Windows 7 computer, I met a problem at the stage where I have to shut down the computer to complete the process. When configuring updates, he remained at 12% for a very long time and then permanently returned to the opening of session and when I checked the history update based on the x 64 updates eleven have been identified as having failed.

  I ran to the resolution of the problems of Windows Update. I did not try to reset the Windows Update components for fear of making things worse. I see at least another user, John Butler, has encountered the same problem and he identified the update of security KB3110329 as the cause of the problem of configuration.

  Later, I downloaded the updates again and hid and then successfully installed their KB3110329 leaving unchecked everything.

  Currently, I have hidden KB3110329 and wait for the opinion of its repair.

  Thank you for your help.

  William Blair

• Problem with drivers HP Pavilion 15-n204ej for windows 7

  Hello.

  I bought a HP Pavilion 15-n204ej, because I liked this brand. There is not since the model without an operating system had no choice. Bought with unwanted windows8.

  While oppened a box I saw that my plastic - around keyboard cover was bolted as he left takes place, with spaces. so I called the service, and after a few phone calls that they dicided to send it for fixing. After 10 days at least, her arrival fixed return.

  After that, reinstalled windows 7 ultimate 64-bit.

  I entered your site to download drivers for windows 7, you put. but almost all of the drivers was wrong...

  After much work and reading, I installed on site and an other sources (including microsoft), but still left 3 uninstalled devices (bluetooth controller, ethernet controller, pci device) and my touchpad does not work.

  Fix all driver and help me urgent.

  all that makes me less love this brand and this service, so I'm not sure I'll find a reason to buy products in the future.

  (it'sw is not first, I surprised & "got a burn" with hp quality and service (for example my printer officejet 4500)).

  This is NOT official HP customer service and I, like most other people on this forum do not work for HP. It is a forum for users of peer-to-peer supported for class for the HP consumer products. HP maintains no official presence on this forum and it is unlikely that HP will respond in an official capacity. Response of an employee of HP represents his own opinion and not that of HP.

  HP is not recommended to install Windows 7 on any computer comes with Windows 8 / 8.1, or it will support installing Windows 7on of that computer. HP cannot provide the drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 may not support some of the hardware or software designed for the computer.

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  Based on the specifications of the laptop HP Pavilion 15-n204ej, this model shipped from the factory with Windows 8.1 64-bit installed. You need to change some settings in the BIOS, and you may need to provide Intel SATA/RAID drivers to install Windows 7.

  Many of the 64 - bit drivers Windows 7 on the page of Quad Edition CTO Notebook PC HP ENVY 15 t-j100 drivers should work for your computer.

  Driver and Intel Chipset Installation utility

  Intel Management Engine Interface (MEI) driver

  Intel Smart Connect driver technology

  Intel USB 3.0 Host Controller Driver

  Realtek LAN driver (LAN)

  High definition (HD) of Intel Graphics Driver

  NVIDIA driver graphic of high definition (HD)

  Synaptics TouchPad Driver

  After installation of Windows 7 and the above drivers, please post to the "Hardware ID" Device Manager (text only) for all remaining missing or unknown devices, as shown in the example below.

  

  If the "Touch Pad" continues to not work, please contact the official HP support in your region / country, via the Portal of HP worldwide support, warranty service.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• I have a problem with the running SFC/scannow?

  My computer is Windows XP Pro SP3. I want to run sfc/scannow, but was prompted to insert the CD of the operating system; my installation CD original authentic is Windows XP Pro SP1, which I've updated online to SP3. Does this mean that I can never run sfc utility because the two service packs are different? If you cannot run the sfc, is there a way to bypass the request for the installation CD? Is it possible for sfc replace the corrupted files or folders with a good the INF, I386 or Swsetup folder (forgive my ignorance)? I would be grateful to anyone offering a solution.

  You will need to open regedit and navigate to-
  EntVersion entVersion\Setup

  Double click on the "ServicePackSourcePath" key and change the value to read-
  %windir%\ServicePackFiles

  You may also change the SourcePath to C:\

  I can't double check what I slipstreamed sp3 in my installation cd.

  Make sure you have backed up the first key in regedit, go to file, choose export, choose office, once it is saved on the desktop, then you can change to test CFS.

• I have a problem with the installation of the drivers for the Belkin card.

  Hello

  I just bought a new Belikin N150 USB Wifi Adapter. I went through the installation disc and all except that tooth was installing the drivers. I tried to install the drivers, and it gave me this error. Help, please! I am also on an Administrater account

  

  ~ Matt

  Hello Matt,

  Thanks for posting your query on Microsoft Community forum.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. You are able to install other software/drivers without any problem?
  2. You have security software installed on your computer?

  Try it out below mentioned methods and check if it helps.

  Method 1

  I suggest you to disable the temporary security on the system software and check if it helps.

   

  Disable the antivirus 

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  Method 2

  Note:

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  You can use the following link to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756/

  This error can occur due to permission problem in the registry for the USB controllers. I recommend that you take the permission to the registry editor USB. To do so follow the steps below.

  • Run regedit from the Start menu. Be sure to export a backup copy of the registry before continuing.
  • Browse to the location:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\ENUM\USB

  • Right click on the USB folder and select permissions...
  • In the dialog box, make sure everyone is a listed group and that the reading is checked.
  • Click the Advanced tab and make sure that include the permissions that can be inherited from the parent of this object is selected, as shown.

  

  • Go to the owner tab and be sure to replace the owner of subcontainers and objects is selected as shown.

  

  • Select Apply to apply these changes. A warning message may appear at this stage. Select OK to continue.
  • If necessary permissions for USB dialog box select , and then click OK to exit.

  Feel free to post them here if you need further assistance.

  Thank you.

• I have a problem with the touchpad does not not on Windows 7.

  Original title: help. My touchpad scroll has stopped working.

  I have a laptop of Acer Aspire 5750z-4830. Touchpad scrolling does not scroll when I try. How can I put it to the top after that I took it to be repaired? Since I got it home now it won't work. And I don't have the cd to reinstall.

  Hello

  Thanks for posting your question in the Microsoft Community forum. I understand that the touchpad scroll has stopped working.  I'll help you with this problem.

  Before troubleshooting, provide us with information.

  1. don't you make changes to the computer before this problem?

  This problem may occur if there are some differences in the file system or the associated scroll Touchpad drivers. Follow these methods:

  Method 1.

  Open the hardware and devices Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Method 2.

  You can also follow this link and check if that helps.

  Mouse, touchpad and keyboard under Windows problems: http://windows.microsoft.com/en-us/windows/help/mouse-touchpad-and-keyboard-problems-in-windows

  Method 3.

  Check if control panel touchpad mouse is enabled or not. Follow these steps.

  1 - click on 'start '.

  2 - Select 'Control Panel' click the icon of the '' mouse. '' If you don't see the mouse icon, select Classic view of the control panel.

  Tab 3 - Click the "peripheral" in the window that appears. Select the 'enable '.

  4 button - Click on the 'apply' and select 'OK '.

  Method 4.

  Alternatively, you can also try the following steps.

  1 - Locate the "Fn" button in the lower right or left side of the keyboard of the laptop. The 'Fn' key has different text color on it or the key itself is a different color.

  2 look for the function key (F1-F12) on the top of the keyboard that disables or active the touchpad on the laptop. The key usually has an icon that looks like a touch pad with a finger touch she or a touchpad with a diagonal line through it.

  3 - Press "Fn" both the touchpad function key simultaneously to reactive the touchpad on your laptop. Move your finger on the touch pad to make sure it works. Press to disable the touchpad again at any time.

  If you need help on this particular issue or any other related Windows issue, let know us and we will be happy to help you.

• I have a problem with the printer works is not on Windows 8.

  Original title: device

  my printer has stop working.  Convenience store tells me that the coils do not work.  How can I solve them?

  I suggest you to uninstall the printer and install the latest printer driver for the printer model you are using.

  I see an error message about "spooler" problems

  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print.

  If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, you may have to restart the spooler to print on your computer.

  To restart the spooler, the simplest method is to save your work and restart the computer. Alternatively, you can try the following steps:

  To restart the print spooler service

  1. You must be logged on as administrator to perform these steps.

  2. Press Windows key + R
     Type: services.msc
     Press enter on your keyboard

  3. Right click on the print spooler service, and then click Properties.

  4. On the general tab, next to startup type, make sure that automatic is selected.

  5. If the service is not already running, under Service status, click Start and then click OK.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

• I have major problems with Photoshop CS6 after the upgrade of Windows 8 to 10 of Windows.

  Just upgraded to Windows 10. I had 0 issues before upgrading my system. When I first opened the program I couldn't use any tool correctly because the jury of art was covered in black and flashing/alternating between black and transparent background. I have close to reopen and try again. Now I can't even open Photoshop at all. I get an error indicating that the program has stopped working. From now on, it seems that it is only of Photoshop with the question and not my other CS programs. How can I fix? He couldn't start comes at the worst time in the middle of a project.

  Hi dropj

  Thanks for the update.

  Here are a few steps you can try

  • Check your system must meet all requirements for Photoshop (especially graphics cards) system requirements | Photoshop
  • In Photoshop, check open Cl must be enabled in preferences > performance > advanced settings. Also check how is the VRAM

   

  • Create a new user account on your computer How to Set Up and configure on Windows 10 user accounts

  Then try to work in Photoshop in there

  • Temporarily disable the use of your card from the Device Manager and try to use Photoshop.

  Concerning

  Assani