I have a problem with my iPhone 6 s more battery. When he arrives less than 30% the phone will stop and will not restart unless I connect it to the charger. Once it reboots it shows the same battery as the entry stop percentage.
I have a problem with my iPhone 6 s more battery. I had to 'support' from Apple telling me there is nothing wrong with the battery, I was at the store and had them test and I had two replacements and they all did the same thing, even to start the replacement up as a new phone so that there are no applications that could contribute to the problem. I told them repeatedly it was their software problem, but they said they had never "heard of someone having this problem. I have not updated to the latest version of the software to see if the problem still occurs and initially it didn't, but then he was back at close to 30% or less, even if there is a power adequate to continue much longer. I've updated to the latest version because it refers to a "correction of battery problems. Unfortunately, it makes no difference at all. I had iPhones for many years and have always been a fan, but my next phone will be a Samsung unless Apple admit to their problem and sorting.
When you've got additional phones you restore from a backup or set up as a new device? If the first case, then this is probably your problem.
Restore the configuration as a new device / phone and be on your way.
PS None of your fellow users on these forums really care if you get a samsung and I don't know that apple will do fine without you as a customer.
Tags: iPhone
Similar Questions
-
Please read above, thank you.
What I mean is I want as an installer for each a Flash available that requires no (need) as an administrator to install.
This way if for example a man by the name of Mack is a library and it is on the account invited library on a computer at the library, but it requires the latest version of flash to play a game online
It can download the do not have to run as administrator in any new version of flash and install it and then he can play the flash game he wants to play.
Hello
Thank you for your comments, however, Flash Player saves files to and written in, the high file system locations, administrator rights are required for installation.
--
Maria
-
Hello.
I am building an application that can find a PnP USB audio device and play a tone if the device is connected. I am able to search audio devices using "Sound Device Info.vi" of the lvsound2.llb that comes with labview.
The vi can find the USB device in good conditions, but there are problems - I'll try to describe 2 scenarios.
1. the USB device is connected before 'Sound Device Info.vi' is called for the first time.
In this case, the program can find the USB device. If I unplug it, the device disappears from the list of found audio devices. If I reconnect to the same USB port, it reappears in the list. It's all good.
If I reconnect it however a new USB port, the device is not found. This is not good.
2. the USB devices is not connected when 'Sound Device Info.vi' is called for the first time.
"Sound Device Info.vi" is not able to find the device. Disconnect and reconnect does not make a difference.
I'm under labview 2012 on windows 7.
I am running the application as an exe to build.
I call 'Sound Device Info.vi' as a 'call for reference"and the reference is closed between calls to the vi. I was hoping this would unload the dll used in "Sound Device Info.vi" and would solve the problem, but it didn't.
Is there a way to reset the information usb labview during execution?
Concerning
Stephan.
Hey Stephan.
The sounds screws require a DLL located in:
C:\Program Files (x 86) \National Instruments\LabVIEW 2012\resource\lvsound2.dll
Internally, LabVIEW uses the DirectX API to enumerate devices. The one caveat is that probe us for devices when loading the DLL. We probe not later. So that it works for Bluetooth, USB, fire wire, etc. devices that can be inserted or removed at any time, you control somehow when this DLL charge and discharge. To do this, please see the following document:
Dynamically that I can load and unload a DLL in LabVIEW?
http://digital.NI.com/public.nsf/allkb/77594203D78D12278625729100758BE5
I would also recommend that you provide a Kudo to this idea:
Updated library lvsound2 (Sound Input/output Sound live) to support audio devices change on the fly
-
Hello people, I have 2 problems with my iPhone 4S. I'm in IOS 7.1.2
1. I cannot turn off the power button more it seems to be broken.
2. sometimes, when an alarm internal turns off the whole phone freezes. The only way I can unlock it is to plug it into a power outlet. Has anyone else had these problems?
Thank you
Dave
1. you can get the power button replaced/fixed to any repair service provider.
2. try to reset the phone. Go to settings - general - reset - Resets all settings
-
have a problem with my Windows Services.
I have a problem with my Windows Services.
Every time when I run the Windows Services window, I get a warning:One or more activex controls could not be displayed because that is:
1. your current security settings prohibit running activex
the controls on this page, or
2. you have blocked an editor of one of the controls.
for example, the page may not display correctly.The warning popup opens only when I click on the extended tab.
The problem has nothing to do with the security of IE, because I can open pages with ActiveX controls on them and so.I installed the Spybot spyware/malware removal tool. Then uninstalled.
I don't know if this is the cause of the problem. But I assume that it is.So, maybe someone faced the same problem and knows the cause for it.
Thank you.
Hi faisalzaman,
Check out the link below to put on with similar problem and check if it helps.
-
I have a problem with a graphic refreshing after its related data provider changes.
I have a problem with a graphic refreshing after its related data provider changes. After calling the subsetHighLowData.refresh () I expect the table to redraw, but he looks always the same. I even checked the debugger to see if the range had occurred and he had.
Ideas of friend codes?"nikos101" wrote in message
News:gib6aa$PRR$1@forums. Macromedia.com...
> I have a problem with a graphic refreshing after its related data provider
> changes.
> After calling the subsetHighLowData.refresh () I expect the graph
> to
> redraw, but it still looks like the same. I even checked the debugger to see
> If
> the slice took place and he had.
>
> Any ideas friends coding?
>
> subsetHighLowData.source =
> highLowData.source.slice(slider.values[0],slider.values[1]);Just use the removeItemAt collection ArrayCollection, and it must handle the event
a distribution for you.HTH;
Amy
-
When windows update, the restart may end, it says please wait and do not restart unless I closed it and open it in safe mode, what can I do?
Hello
1st thing to try is a restoration of the system in safe mode
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not read this information
the link below is how to download and get a vista disk startup repair, which you can start from the
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below
http://www.bleepingcomputer.com/tutorials/tutorial148.html
to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start
It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu
Change boot order it do dvd drive 1st in the boot order
http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/
If the problem continues to repost in the correct windows update forum
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
-
I have an iPhone with IOS 9.2.1 6. It does not open the jpg files attached to an email, although it opens the jpg files before a recent update of IOS. My wife 4 IPhone opens the jpg files attached to our email. I never had this problem with my iPhone 4, iPhone 5 or my iPhone 6 until a recent update, but I do not know what update caused the blackout. The mobile phone seller did a search on the web and not found any reference to it. A hard reboot was not helpful. Any suggestions?
What email provider? What happens when you try to open the JPG file?
-
I bought the new iphone 6 s more and I have not configured, I just opened the phone and charged, but after some time it stop by itself, is this normal or I have a problem with my phone?
You need to activate the phone. There is nothing that the phone can not be activated.
-
I have problem with my iphone 5 has no 4g 3g only. in Sweden in the works of 4g Malmö... can someone help me please...
Where did you buy this phone? 4G has already worked on this phone? Whatever the carrier said when contacting you? Have what troubleshooting you tried?
-
I have a problem with error 53.i have 6 + and I m out of warranty. I know this error is for people who have their iPhones fixed by a third party before, the thing is my iPhone 6 + was never taken to a third person before, error 53, it isn't my fault .i was going to do a upgrade to the new version
All view of what can be done
If your device is outside its warranty, you can always make an appointment at the Apple Genius Bar to have the studied unit. 53 error will also occur if there is other material errors that are not defined on the device. One of them has to do with contact IDS. Your Touch ID was never working, or did it stop working? Have you had damage to the device by dropping, water damage or damage to the 'home' button?
Apple can examine the device and determine your options. You will also be flooded with other options for independent repair facilities, however before turn you to this, understand that their work on your device will void any support post-warranty Apple, and there is no way of knowing that the qualities of these repair facilities, as they are not certified by Apple, as Apple does not certify independent repair facilities. If you decide to go this route, be sure to only find a way to check the reviews, etc..
-
Asslam o aliakum. I have a problem with itunes 12.3.2 it is not downloaded the 10 windows and when I connect m iphone with itunes and want to update to 9.2 says please download itunes new version for ios 9.2... help me with this... How to solve this problem.
Greetings Dani56777,
Thank you for using communities Support from Apple!
I understand that you run Windows 10 and you must update iTunes to the latest version so that your iPhone will be recognized when connected. I do not know if you receive an error when you try to update iTunes or not.
If you need information on how to update iTunes, please follow the instructions in the following link.
Download the latest version of iTunes for Windows - Apple Support
If you receive an error or alert, you can consider removing iTunes and all of its associated components and then reinstalling fresh iTunes on your computer. That would give you the latest version of iTunes. If you need execute this process, please follow the steps described in the following article.
Remove iTunes Control Panel and its associated components
Use the control panel to uninstall iTunes and software components in the following order:
- iTunes
- Apple Software Update
- Apple Mobile Device Support
- Hello
- Apple Application Support 32-bit
- Apple Application Support 64-bit
On some systems, iTunes can install two versions of the Apple Application Support. What is expected. If both are present, do not forget to uninstall both versions.
Do these elements in a different order, uninstall or uninstall only some of them. This could have unintended effects. After you uninstall a component, you may be asked to restart your computer. Wait to restart your computer until you finish remove all components.
Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components
Have a great day!
-
I intend to buy a Apple Watch, United States of America, but I own a European iPhone 6 Plus device. Anyone know if I have a problem with the sync between devices? I don't think, but it would be more useful to have a definite answer for this as my assumption...
Hi John
The devices normally work together.
There is no difference in the hardware specifications for the watch. It can be configured to use your preferred language and format of the region.
Adapter USB power to the watch will be located in the United States. To charge your watch via food in Europe, you can use the magnetic charge cable supplied together with a real 5W Apple (iPhone) or 12W (iPad) adapter USB power (or with a third party, Apple certified adapter).
-
No response to my problem
I have a problem with activating photoshop elements 14 upon activation of the server responses me that I am not bound. I start again and I still got the same message!
!
-
I have a problem with Canon PowerShot SX 60 HS-vamera wirh Camera Raw in Photoshop elements 12, cannot open raw files. I have the latest version of camera Raw plug in, what is the problem?
It's on our radar and hoping to incorporate it in a next update.
As soon as it is available, it will be updated in the article.
http://helpx.Adobe.com/Creative-Suite/KB/camera-raw-plug-supported-cameras.html
~ David
Maybe you are looking for
-
How and where to get ios gear4 smartlink app for older devices?
I would be grateful for help on getting the gear4 smartlink ios app. I buy it in 2012, but I don't have a working backup and install on radio 2/black bird ipad and an increase of 4/house party iphone. Thank you!
-
I want to disable the motherboard for a Pavilion p6232p video driver
I need to turn off or disable the driver for the card on mother built in video card in a p6232p of Pavalion. The manufacturers motherboard is an Asus IPIBL-LB
-
How to single space lines in the report for MS Money 2002?
When you print reports is it possible to single space lines as well as the report fits on a single page? My OS is Windows XP. Thank you.
-
Playlists on Linux...
... are the PITA that I expected them to be, but they can be made. I have installed Audacity and Rhythmbox. I couldn't Rhythmbox to create or export playlists that would recognize the "rocket". The list of native reading Audacity is also not recogniz
-
Need to install W7 professional to new SSD
My main hard drive with W7 crashed. I installed a new SSD drive and tried to install W7 on upgrade drive, but since There is no OS on the drive, it will only install as a custom installation and does not accept the upgrade product key. I spent about