I have a problem with programs on the computer of fence on switching between users.

Similar Questions

• I have a problem with Autoruns on the computer.

  Original title: Autorun problems

  I wonder if anyone can help. I have Windows 7 64-bit edition.

  Unfortunately I bought antivirus Bitdefender a few months previously. He tried an 'autorun Media"and recommended to turn off, that I allowed him to do. I then fed up as it stopped all the DVDs and USB keys from popping up automatically. But... and this is! There is no way in Bitdefender to reverse this trend. I emailed and received many unnecessary responses, which did not work. The same was told to download and run this file:

  http://www.sevenforums.com/attachments/tutorials/200584d1330364432-autoplay-enable-disable-enable_autoplay.regBut nothing changed. I finally found a solution, surfing the internet. There were strings in my registry called something like nomediaautorun or similar, and I deleted them. Now USB sticks and DVDs pop up with a choice of options again.
  
  However, the automatic content of the DVDs does not load! In other words, if I put a game DVD in the computer, I don't get the automatic screen with the "install" etc options... I'm really fed up. I've looked around everywhere and can't find a solution. Can anyone help please???
  
  Thanks.
  

  Hello Ulrich,

  As the problem persists after performing all the troubleshooting steps, it could be because the system of corruption files. To retrieve or replace these files, we will perform repair installation of Windows 7 that will not affect your personal files and settings. But, it will replace the missing or corrupted operating system files.

  You can check the link:

  http://support.Microsoft.com/kb/2255099/en-us

  Warning: On-site upgrade device: before performing an upgrade on the spot, you should be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

  Please let us know if you have more queries on Windows.

• I have a problem with access to the computer after forgetting the password.

  Original title: I forgot my password to connect you now I can not access anything that has to with the hard disk drive please help... Computer is going to crash

  My laptop monitor is broken, so I stopped using it... haven't used in awhile... now I'm using again and not the password journal-gin admins that I remember... I tried everything... it of not that big of a deal... the biggest problem is that whenever I try to do something that has to do with the hard drive including anything, including updates or access to anything or change all the settings download, he asks for the admin password... My computer will cause crash soon I can't save anything without the password. Help, please!? WHAT SHOULD I DO?

  [Moved from comments]

  Hello

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• Problems with Windows Defender, the computer support.

  I have spyware doctor™ installed and registered on my computer. Yet windows defender has repeatedly popped up and resumed my computer turning off not only spyware doctor™, but also all the other programs on the computer. I do manual restore just to remove the program. Also when he takes over the system it starts automatically from the internet and brings up all kinds of advertising. How this program can be stopped. All my firewall and security settings are set to high. Windows allows however in it because it has the certificate of microsoft.

  This is like Microsoft's Windows Defender. It seems that your computer is infected, probably by a rogue security program. The real Microsoft Windows Defender doesn't not part of Windows XP.

  Your system is infected with a rogue antivirus program. It's called "thugs" because he pretended to be a good guy but is really bad. Don't pay them!

  Search for removal here Bleeping Computer how removal steps - of - http://www.bleepingcomputer.com/forums/forum55.html
  or here - Malwarebytes malware removal Guide - http://tinyurl.com/5xrpft

  Malwarebytes' Anti-malware (MBAM) or SuperAntiSpyware will often do the job. Both have free versions and you don't need to buy these programs.

  These can work for you, and all can be good. However, in many cases the computer will also infected with other horses of Trojan and protected by a rootkit. These machines are extremely difficult to clean. If your machine is one of these cases, either the interactive assistance to one of the specialty forums listed in the link below, OR take your machine to a professional on the local computer OR backup your data and do a clean install of Windows. It's your choice. I do not recommend using BigComputerStore/GeekSquad types of places.

  http://www.elephantboycomputers.com/page2.html#HJT-links MS - MVP - Elephant Boy computers - don't panic!

• Hi, I have a problem with threats in the temp folder

  Hello
  I have a problem... Apparently, about 26 files in the windows/temp folder are infected. All files names begin with game, for example set625D.tmp and my antivirus program wants me to remove (on average). The problem is that I'm not sure if I have to remove, more exactly if my computer works perfectly if I delete them. Should I remove them, or look for an alternative? BTW, I have Vista...

  Friday, February 1, 2013 16:41:14 + 0000, Marie-Claude wrote:

  Hello
  I have a problem... Apparently, about 26 files in the windows/temp folder are infected. All files names begin with game, for example set625D.tmp and my antivirus program wants me to remove (on average). The problem is that I'm not sure if I have to remove, more exactly if my computer works perfectly if I delete them. Should I remove them, or look for an alternative? BTW, I have Vista...

  You can delete all the files in the folder temp without problem, unless
  they are used. If they are in use, Windows won't let you delete
  them.

  However, if they are part of a virus, AVG may be able to remove them.

• I have a problem with access to the content windows install.

  When you try to install a downloaded Update (Mr. Fix - it of the current version of MS and ATT Communication Manager) windows install stops before finishing and gives an error meesage. I had some instructions on the BITS. Reg, but don't know what to do or where he is. HELP cannot use mt no tethering, no wifi at home aand sick of sitting in Starbucks coffee shops trying to solve this problem.

  Hello

  1. What is the exact error message you get?

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  Make sure that the Windows Installer service is running:

  The Windows Installer service can be disabled on the computer.  
   
  a. go to "Start "-> "run ", type "services.msc " and press the "Enter " key.
   
  b. double-click on the service named "Windows Installer ".
   
  c. check the value the "start type: " field. Is currently set to "Disabled ", then that's the problem. Change it by selecting 'Manual ' in the menu dropdown.

  Step 2:

  Follow all the steps in this article to resolve the problem.

  Problems installing and uninstalling programs on Windows computers

• Problem with upgrade of the computer and activate Windows, he stated that "the failure of key you entered is already in use.

  Original title: problem with upgrading the computer and Windows activation

  I have improved my week to loast of computer of an Intel Core 2 Duo to an Intel Core 2 Quad processor.  Now Windows tells me I need to register my product.  When I tried to do, he said that "the failure of key you entered is already in use.  To activate Windows, you will need another product key Windows Vista Home Premium. "How can I get MIcrosoft to realize that I have not installed Windows on multiple computers. I just put my equipment?

  Hi Tkelleyaustin,

  I suggest to check the following items and check if the problem still persists.

   

  Resolve activation problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-activation-problems

   

  Activate Windows on this computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/activate-Windows-on-this-computer

  How to activate Windows Vista

  http://support.Microsoft.com/kb/940315

  I hope this helps.

• Problem with USB on the computer.

  Hi, I'm not very good with computers at all. I have a HP pavilion which all works fine until the other day, now it may just be a coincidence but I plugged my iPhone for the first time and since then none of my USB devices are appearing when I plug them in. his making the noise, but its all just not appearing on my Explorer of files of any suggestion?

  Hello

  Check their documentation online with the HP Support and drivers, diagnostics and ask to their
  Forums about known problems.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Also check with iPhone Support as there may be a problem with this phone.

  iPhone Support and community
  http://www.Apple.com/support/iPhone/

  ====================================================

  Troubleshooting you can try:

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the Office
  and the splash screen.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Windows key + X (or right click in the lower left corner) - (Admin) command prompt

  C:\Windows\System32\ >

  At the prompt, type in SFC/scannow above
  (There is a space between C and /)

  How to run the command "SFC/scannow" at startup or in Windows 8
  http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html

  -----

  Then run CheckDisk (chkfdsk/f/r)

  File (formerly Windows Explorer)

  Right click on drive C: - Properties - tab tools - error checking - Check

  Windows 8/8.1 - improve performance by optimizing your hard drive - see "to repair a drive:
  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  How to check a drive for errors with "chkdsk" in Windows 8/8.1
  http://www.eightforums.com/tutorials/6221-chkdsk-check-drive-errors-Windows-8-a.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are identical (and
  Windows 8/8.1)
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick three 1
  are there choices to see if any.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ------------------------------------------------------------------------------------------------

  Install USB 3.0 and other USB devices
  http://Windows.Microsoft.com/en-us/Windows-8/install-USB-3-USB-devices

  Hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Set up your PC - configure your devices
  http://Windows.Microsoft.com/en-us/Windows-8/set-up-devices#1TC=T1

  Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  What happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ===================================================

  If necessary:

  Try to do a "Refresh you PC without affecting your files" (or modification of your personal data
  settings) or even a restore.

  Windows 8/8.1 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8/8.1
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8/8.1
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Problem with sparkle in the computer.

  I use windows 8 pro. But I did not change my display screen brightness. Now that I have?

  Hello John.

  You can set the brightness and contrast for most monitors using buttons or other controls on the monitor. If you don't know how to adjust the brightness and contrast on your monitor, check the manual or the manufacturer's website. You can also check if your PC has an automatic brightness control. And if you have a laptop, you can adjust the brightness in Windows.

  Follow these steps to automatically adjust the brightness:

  Some PC adjust the brightness of the screen automatically based on the amount of light in the room where you use the PC. To see if your PC has this setting, follow these steps.

  -Drag the right edge of the screen, tap settings, and then tap Change PC settings.

  (If you use a mouse, point to the lower right of the screen, move the mouse to the top, click settingsand then click change PC settings).

  -Press on or click on PCs and devices, and then tap or click on display.

  -Make sure that the slider to adjust the brightness of my screen automatically is enabled.

  (If you don't want to automatically change the brightness of the screen, tap or click the slider to adjust the brightness of my screen automatically to turn it off.)

  -Press or click on apply.

  Refer to this article to learn more.

  Get the best display on your monitor

  http://Windows.Microsoft.com/en-us/Windows-8/get-best-display-monitor

  If the problems persist then, you will need to contact the manufacturer of the laptop HP for more information on setting up the brightness on your laptop.

  You can also post your request in the forums of HP.

  http://h30434.www3.HP.com/T5/notebook-computers-laptops/CT-p/notebook

  Please do not hesitate to write us again and we will be happy to help you come.

  Thank you

• Problem with disk on the computer management.

  Hello Sir,

  I get my phone by using the dell recovery, but after the end of the recovery. My volume (E) again a disk partition has been converted to the OEM Partition due to that I can't see and access this drive so please help me to get my all data and access this drive. Please tell me hoe to convert this OEM in main partition.

  Hello Paresh,

  Thanks for posting us at Microsoft Community.

  After my research, if you perform a factory settings on the computer then all data will be erased.

  Please see the note referred to in the link of Dell Support.

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/kcsarticles/ArticleView?docid=608277

  Unfortunately, it is not possible to recover data if you have a recovery system to factory settings.

  However, you can use third-party online software to recover lost or deleted data.

  Note:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope that the information provided is useful. Let us know in case you need more help.

• Problems with sound on the computer of Windows 8.

  my sound completely drops whenever I use my Dell inspiron 15R. IM tired of having to restart my pc every 20 minutes for the sound. IV tried all the stuff I can to fix the problem, but I get the same messages driver works properly and is up to date. the camera is used by another application but I haven't opened that it would use. Just WordPad which doesent use any sound I get no sound at all no sound sound of windows net or my hard drive. need this problem as soon as POSSIBLE

  The tab of the Windows driver will often say that the driver is updated, when in fact, the manufacturer has a newer version that Windows can detect.

  Instead of using the driver tab, I go to the website of Dell directly and manually download the new driver for Dell.

• I have a problem with printing on the HP Deskjet 5740.

  Original title: impression of the printer

  I just had a new office of HP (HP 6200 Pro) running Windows 7 Pro and have an old HP's Deskjet 5740 I can't print.  When I followed the link to install the driver, I get this message, "the drivers for your HP product are already included in the new Windows 7 operating system! You don't need to download the drivers to use the product . Simply connect the printer to your computer with a USB cable, and Windows Update automatically installs the driver for your product. »

  Hi Marc,

  I suggest you try the procedure described in the article and see if it helps.

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Check out the link for more information.

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• I have a problem with access to the C drive.

  Original title: lost access to the C: drive...

  When I was a noob after installing a new HARD drive, I have written an autorun.inf file to my C: drive to make it look cool (you know, give it a cool name, and change the icon). I was not allowed to save .inf in the root files, so I decided to open the properties and tinkering with security... when I turned on my computer later, I now do not have access to the c drive, and cannot do anything administrative (including rear safety switching)

  Please, please help!

  Hello

  Method 1:

  You can enable integrated admin and restore the system.

  Step 1:

  To activate the built-in Administrator account, follow these steps:

  a.Click theStart button, then type cmd in the Search box.
  In the list of research results, right click on cmdand then click run as administrator.

  b.At the command prompt, typenet user administrator / Active: Yesand then press ENTER.

  net user administrator , c.Type and then press ENTER.
  Note: Please replace the tag with passwords which you want to set for the administrator account.

  Type exitand press ENTER. Disconnect from the current user account.

  Step 2:

  System restore

  http://Windows.Microsoft.com/en-in/Windows7/products/features/system-restore

  Method 2:

  If the problem persists, perform a repair installation (upgrade on the spot).

  Check out the following link to do the same thing:
  http://support.Microsoft.com/kb/2255099

  Note:
  You can back up data to an external hard drive and no CD. It is essential to back up data even if you do an upgrade on the spot.

  Reference:

  Back up your files

  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  It will be useful.

• I have a problem with access to the previous page.

  Original title: confused in Alberta

  I know few things about my computer regarding terminology, etc. that I use only for info and email.  I have an Acer Aspire and run Windows 7.  For a while now, I was able to go to the previous screen with the arrow at the top left.  Any suggestions because it is only a disadvantage compared to several other questions that plague me now.  Thank you for taking the time to read this.

  Hi David!

  In Windows Explorer: you have folder options set to open in a new window? If so change to open in the same window (from the Explorer > tools > folder options)!

  Concerning
  Julia

• I have a problem with any of the applications on the computer.

  I just bought a new HP laptop in December and it came with windows 8 is already installed and working fine until a day ago. None of the apps will launch when you click on it, it just throws me back to the start menu with all the tiles. I tried all that I found with still no luck on fixing the problem so if you know what whether that will fix it that would be great! I mean absolutely no applications work very please tell me not reinstall because the windows store still doesn't work...

  Check below link
  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app