I have a problem with reading the free cells.

Yesterday, I played solitaire free cell. Today, I tried and received a message, "cannot open was moving" can't find it

Try to uninstall the game, reboot, and reinstall the game.

(then "view by" small or large icons)

(then, at the top left)

Once the list fills, click the [+] sign box games, uncheck FreeCell, and restart the PC.

Then repeat the process but ticks FreeCell.

Tags: Windows

Similar Questions

  • Problems with reading the series bytes

    Hello

    I currently have a PIC18F microcontroller serial communication with LABview using the base read and write.vi series. The PEAK sends strings such as "V222! (V is the character of the header, and! being the end character). Then, I have a program to take each individual character read and concatenate them in a larger string for data extraction. The port has been configured to 38400 baud and be only a single byte of long.

    The captain sends this one byte at the time and the problem here is that LABview seems to be only reading V most of the time, and occasinally has 2. Since it doesn't seem to be never read the end character, the sequence of extracting data from my code is never executed.

    A few questions I have are:

    The captain may send one byte at a time, but also all other devices communicate through a serial port.  The definition of the serial port involves both a byte.  Actually it's really a LITTLE at a time.  But serial port parameters leads to the gathering of 7 or 8 bits to produce a byte.  The PEAK sends a follow-up byte to another byte, etc.  The time between shipments of the byte may be too small to read contiguously in your Labview program.

    At very slow speeds, it could really work.  At 300 baud (3mS / bit), there are 33 mS to send a byte (8-bit + stop bit, start bit).  So if your loop runs fast enough, you get every byte one at a time.  But there is the overhead of other code to store the bytes, etc..

    38000 baud to only 0.2 mS to send a byte.  LabVIEW is not fast enough to loop at this rate to capture all the bytes individually.

    But why bother?  Simply capture all the bytes and treat them as a complete message.

  • I have a problem with installing the driver bluetooth for Windows 8.

    Original title: cannot install the bluetooth driver

    I have Windows 8 Pro 64-bit (upgrade of Windows 7 Ultimate 64-bit).  I have problems with the bluetooth (Intel Centrino Advanced-N 6230) driver that will not be installed.  The

    error I get when using the driver (downloaded directly from Intel) Intel says "did not write the SupportDLL value in the \SYSTEM\CurrentControlSet\services\BTHPORT\Parameters key.

    \Radio support.  Check that you have sufficient access to that key or contact your support team. »

    Windows Update also displays several times this driver, but it fails to install as well.  If I remember correctly, the error is "access denied."  I contacted Microsoft earlier

    technology has taken control away from my computer and found the same problem.  It disabled all startup and restarted, but we do not have to reconnect after reboot, that's why I'm

    contact you again.  I'm guessing that something has gone wrong in the remake because precisely, I noticed it has disabled my facial recognition software, yet when he

    restarted, it took even my face.

    I am logged as administrator and I have also tried to right click on the .exe file and run as administrator, but it does not help.  I tried

    uninstall/reboot/reinstall with no luck.  I also tried several programs microsoft fix - it, but even once, no, I also tried to contact Intel by CAT and they

    were no help either.

    I tried also to navigate to this key in the registry editor, but I get an error message that says "error opening key.  Parameters cannot be opened.  An error is

    This key prevents open.  Details: access denied. »

    Finally, I'm frustrated and ran a repair of Windows 8 (could not restore because when I upgraded to Windows 8 Windows 7, somehow restorations have been disabled and I did not notice for about a month).  Then, I used the bluetooth driver directly from intel and everything works again.  I will say that when I ran the repair, he removed Windows Media Center (since it is therefore more part of the OS, but an add-on), but it's a very small price to pay for everything works correctly.

    Thanks for the help everyone!

  • I have a problem with all the files and folders on the computer appearing as 'read only '.

    Original title: scourge, each folder and file on each disc are read only and I can't change an any of them

    What happens on my main server. When I choose to change something to read only to normal, he said read only status of disabled, but if I try to change the file or folder I can't change it and if I re - check its properties I find once again, it is read-only. I looged as the admin and I tried everything to put the file or folder read-only point and nothing happening. I plugged a flash drive for only to find that it was read-only.

    Full Scan Virus and there are 10 viruses in my computer, 8 of the virus could be eliminated by removing the leader and two of them were to be eliminated by deleting the infected file.

    The result is that my computer works fine now!

  • I have a problem with reading. WAV files.

    So I tried to mix these sounds to make cool music, but when I open something like Audacity, it sounds completely different when played in windows media player, I am really confused. Has it to do with codecs or bit rate or something like that? Any help is appreciated. Thank you!

    Evan,

    What is the version of Windows installed on the computer?

    Is the question limited to Audacity?

    I'd like you try to play different music files.

    In addition, I would have you read these articles.

    http://support.Microsoft.com/kb/316992#top

    http://Windows.Microsoft.com/en-us/Windows/codecs-frequently-asked-questions#codecs-frequently-asked-questions=Windows-7

    We know if that helps you.

  • I have a problem with disabling the touchpad.

    Original title: isolate the touchpad

    With the help of Windows 7 on a laptop Lenovo G570.  When I isolate the touchpad keys FN/F6, it only lasts a few minutes before that change in return.  This causes the screen to jump erratically.  How can he stay until I want to once again become active?

    Hello

    Keyboard shortcut and mainly and configured by the manufacturer of the computer, take a look at the manufacturing site and see if there are updates for access keys.

    What program you want to activate?

    Take a look:

    http://forums.Lenovo.com/T5/ThinkPad-edge-knowledge-base/how-to-access-hotkey-settings/Ta-p/511845

  • Problem using: read the spreadsheet file

    Hello

    I have 2 problems with reading spreadsheet file:

    (1) for the use of .txt file I can get the first column and not the other (even if I chose the correct output...)

    (2) this does not at all when you use my .xls file

    I must do something wrong but can't find what...

    Has anyone an idea?

    I have attached the .VI and my two files.

    Thank you

    User

    A native Excel file is NOT a text file.  It is a format of custom file created by Microsoft.  This is why you must use ActiveX to interact with him.

    The worksheet ' ' folder features found in the work of LabVIEW with text files (delimited by tabs, CSV, etc.).  The text files are a format more generic that can be read by programs such as Notepad.  Tried to use Notepad to open an .xls file?  It does not work.  Excel can open a text file, because it is a generic format.

    So even if everyone automatically thinks "Excel" when they see the word "Spreadsheet", the two are not synonymous.  In the case of LabVIEW, 'Spreadsheet' made reference to a delimited text file.

    Who is?

  • Problem with reading file xls with text inside

    Hi all

    I have a problem to read the excel (xls) file with the first line containing chains of different length.

    I wonder how can I skip the first line and continue reading of the second line.

    Thank you very much.

    I only have saved VI.

    So here are the names.

    Downstairs: open the file.  Text reading file with lines of selected reading (right click for the menu to find).  Read the text file with lines of reading not selected.  Close the file.  At the top is spreadsheet String to Array.

  • Problem with uninstalling the Toshiba Bluetooth Stack for Windows

    Guys, I have a problem with uninstalling the Toshiba Bluetooth Stack for Windows v4.00.22 on my laptop Windows XP SP2. Whenever I choose to remove the "battery Bluetooth for Windows by Toshiba" (or "Bluetooth HID Switch Service") the installation program starts to prepare, but crashes after a few minutes - the only way to continue is to turn off the laptop.

    The same thing happens when I try to update the stack to the latest version - the installer says that the old battery has to be removed first and crashes after trying to remove it. So is it possible to remove it by hand? I really don't want to reinstall Windows!

    I don't have a copy of the original Software v4.00.22 to recharge so if you have a copy or know where I can get a copy I would gratefully

    Thanks in advance.

    I would try to delete the folder: "C:\Program Files Toshiba Stack.
    Registry settings will remain, but should be repaired after a new installation of the Bluetooth stack.

  • I have a problem with importing photos from iphone to photo

    I have a problem with importing the photos from the iphone to the photos. I have the OS X El Capitan 10.11.1

    It seemed to me that I can't push the button import. It is grayed out.

    Your picture-click the camera icon to add a picture

    How the phone is connected?

    LN

  • Problem with finding the SmartGlass an Xbox to Store or App Store

    Original title: xbox a smartglass

    I can't find that the smartglass an Xbox on the windows store or the appstore please help

    Hi Ibrahim.

    Please contact Microsoft Community. I understand that you have a problem with finding the SmartGlass an Xbox to Store or App Store. I will surely you help with this.

    You can download Xbox a SmartGlass from the following Windows store link.

    http://apps.Microsoft.com/Windows/en-us/app/Xbox-one-SmartGlass/c3a46cb8-e733-4579-B716-862e123fa831

    For more information you can check the link.

    http://support.Xbox.com/en-us/Xbox-360/apps/SmartGlass-Info

    Hope this information helps. If you need more assistance or information on this question, reply to this message. I'll be happy to help you.

  • I want to download free applications, but it doesn't let me do it cause I have a problem with my payment, I try to remove my debit card and the option did not appear, I can't choose no for the payment, what can I do?

    I want to download free applications, but it doesn't let me do it cause I have a problem with my payment, I try to remove my debit card and the option did not appear, I can't choose no for the payment, what can I do? This happen after I bought some coins for a game

    You must settle the debt until you can download something else of the podcast episodes on the iTunes Store or select None as the payment option.

    (142394)

  • Since I load Acrobat Reader DC, when I try to save the document, word to PDF, the pdf file pages are cut on the width. I use Microsoft Office Word 2007 and I have no problem with the previous version of Adobe Reader. Should what settings I adjust?

    Since I load Acrobat Reader DC, when I try to save the document, word to PDF, the pdf file pages are cut on the width. I use Microsoft Office Word 2007 and I have no problem with the previous version of Adobe Reader. Should what settings I adjust?

    Hi judithl34724699,

    If you want to convert Word files to PDF with the Adobe Reader application then it is possible with the service Pack of PDF. Try to use the service on the web: https://cloud.acrobat.com/convertpdf

    Also try to use a different file type.

    Thank you

    Abhishek

  • Have a problem with Lightroom 5.4.  Given that the program crashed yesterday, will not start, it comes up with the message "Lightroom has encountered an error when reading the preview cache and need to quit."  "Lightroom will attempt to fix this ti net pr

    Have a problem with Lightroom 5.4.  Given that the program crashed yesterday, will not start, it comes up with the message "Lightroom has encountered an error when reading the preview cache and need to quit."  "Lightroom will attempt to solve this problem, the next time he throws."  Except that it isn't, I get the same message and the program closes.  Anyone know what I can do to fix it?  Can not backup, can't do anything.

    There are dozens of discussions in this forum that describe the fix

  • Hi, I have a problem with a basic movement scroll effect.  I've already looked and read every tutorial out there about it and even tried the cat to adobe support, but the guy at the other end of the line disconnected me..., he probably didn't unde

    Hi, I have a problem with a basic movement scroll effect.

    I've already looked and read every tutorial out there about it and even tried the cat to adobe support, but the guy at the other end of the line disconnected me..., probably he did not understand what I wanted him, because English is not my native language, so one will try to be very clear on this one...

    Please note that I am new to dream, this is my first project ever.

    My idea is as follows:

    When the customer comes to our site of companies, he sees just our logo on a white background. the logo is composed of, say, four elements. When the client makes a scrolling down, the logo begins to transport: first the first part of the logo flies on the left side of the site, then the second part of the logo disappears down, then the third part of the logo flies to the right, then the fourth part of the logo flies upward and out of sight of customers. given what I've seen, it is possible to do...

    so...

    now I have four parts of my logo imported as png files in muse and was assembled in design mode to build our companies logo. I select each of the four parts and go to the effects of scrolling to the left tab next to the tab layers first I get the same values for each of the four parts: first movement: x 0 and x 0 again for the movement of the left and right; key position (t-handle): 0px; final movement: x 0 and x 0 for the value of left and right.

    now, I hit "Preview". : the logo is "pinned" to the correct location, I can scroll but the logo stays where it is. So far so good...

    now, I select all four components again and go to the tab scroll to 'final motion' effecs, I click on the drop down arrow and enter 1 x. I struck an excerpt...

    When I scroll the WHOLE grave logo down... well.

    NOW, I want the first part of the logo down, THEN part II to move left, THEN the third part to go to the top, THEN the fourth part to go right.

    so I select ONLY the first part, go to the request of scroll, to the 'final movement' tab, I click on the left arrow, then I go 1 x. (the value of up-down, I put to 0 again)... I struck an excerpt...

    the first part of the logo is left as soon as I start to scroll, the other three parties still go down at the same time...

    NOW, I want the second part of the logo to start to move, when the first part left, not at the same time as the first part.

    THEN I SELECT THE SECOND PART AND DRAG ITS HANDLE IN T (KEY ITEM) DOWN, LETS SAY: 200PX. THEN IT STARTS TO MOVE ONLY AFTER THE CUSTOMER HAS REACHED THIS POINT, RIGHT?

    BUT WHEN I SAW THAT *, THE LOGO IS NO LONGER TOGETHER, THE SECOND PART IS FLOATING ANYWHERE, BUT WHERE IT SHOULD BE... WTFF?

    short: when I move the t-handle, the initial position of the object changes. That's what I said to the adobe employee, but he said, this is the expected behavior...

    But if that's the case, how can I have my four parts correctly together, so they form my logo, but with different t treats, so they all start to move at different times?

    Pleeease help me, I will die of frustration here...: () this behavior is not normal, right?

    Thank you very much to everyone who reads this message and tries to help him...

    All the best,

    Niki Lapan

    I'm not good at explaining things that im going to download the file, I did for you. hope this helps you solve your problem

    https://www.mediafire.com/?xiild0yhr5cna7s

Maybe you are looking for