I have a problem with the help of Windows 8.

Original title: Samsung and windows 8...

I use a new laptop sumsung (with Samsung apps, of course) and windows 8 not I used before!  I used Vista with my old computer which was a more basic model, I learn my way around these and (Yes), I read the instructions!  However, some of the most basic things still escapes me.  for example stop/close a page! Logging and disable Microsoft outlook (which keeps asking connect every day.)  I thought I was.) Can someone help please! Thank you... Julia X

Also. The full stop and comma buttons are transposed on the new laptop... Which raises a few problems in itself with pages of e-mail and https. More annoying than anything else!

Never mind... Problem solved thanks! Make a right-click on any page solves the problem of the closure of the pages, list of open pages then goes down!

Also good Outlook account now, don't know how or why, but it is!

Thank you

Tags: Windows

Similar Questions

  • I have a problem with the help of the touchpad.

    Original title: cannot zoom with touchpad etc.

    Cannot set my pad touch, tempted several times.

    Hello Shelly,
    Please go to the Microsoft Community Forums.
    Description of the question, we understand that the touchpad is not working properly?
    Let us move forward and help the issue.
     
    If you could answer a few questions that would help us resolve this problem:
    1 have you tried to install the touchpad of the website of the manufacturer drivers?
    2. What is the exact problem you are facing with touchpad?
    3. don't you make changes to the computer before the show?
     
    We invite you to check out the link and follow the steps in the article:
    Mouse, touchpad and keyboard with Windows problems

    I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

  • My facebook does not work on my laptop. theres a delay of 10 to 20 sec and it freezes.it works on my phone and kindle fine.and fair facebook is the only site that I have a problem with the help!

    My facebook is not loading properly it freezes and theres a delay.it of 10-20 sec worked very well for any other device.and that my laptop works properly on another site

    Hi Bobbi,

    The issue can be caused if the date and time is not properly defined.

    1. what browser do you use on your computer?

    2. you receive an error code or message?

    3. have you checked the issue with a different browser?

    First of all, let us try to launch the tool Internet and network by right clicking on the network in the notification area icon, click on solveand click Internet Connections. This utility can you ask questions or reset common settings as he tries to solve the problem. If running the tool network and Internet did not resolve this problem, follow the steps described in the following link and check if you are using Internet Explorer.

    Can't access some Web sites in Internet Explorer:

    http://support.Microsoft.com/kb/967897

    Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

    If you need further assistance on this topic, let know us and we will be happy to help you.

  • I now have a problem with the update for Windows Live Essentials 2011

    I don't understand how it happened, but maybe someone could enlighten me?

    First of all, I was informed of an update for Microsoft Security Essentials. So of course, I did the update because I didn't want to be protected.

    I don't know if this is related somehow. I think that my update understood also as a Windows Live Essentials package. When I checked my e-mail and instant messaging, I noticed that the format has changed, and now, I think it's the new WLM 2011.

    It may seem very nice and put up-to-date, but it caused a series of serious problems for me. Let me explain:

    First of all, I must clarify that I am disabled and use the speech recognition, Windows speech recognition Dragon NaturallySpeaking both, because I can't use my hands.

    In the original WLM before the update, if I were using Dragon NaturallySpeaking, I was able to dictate with great ease and had no problem. If I wanted to then send the email I would say just 'send' and e-mail would go. With WLM 2011, if I say that now, it does not work.

    It's just a problem that I have. The next problem is much larger. In some cases, Dragon NaturallySpeaking speech recognition will not work and I can't dictate anything. I then have to close WLM completely and then open it again. Then only, it'll work. This happens many times and it's very frustrating, as you can imagine for someone like me.

    Forgive me for saying, it may seem very well with all the new bells and whistles there, but it makes my life a misery at the moment. In my view, there are a lot of bugs that need to be sorted out first with her.

    My question is, can I go back to the original WLM somehow until the update meets my needs? Can I go back to the status quo when WLM 2010 worked well with speech recognition for me?

    If so, can someone tell me how to do what you please?

    If not, then how am I supposed to use these features now?

    Thank you

    HB

    You will find support for Windows Live Messenger in these Windows Live help forums: http://windowslivehelp.com/forums.aspx?productid=2 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • I have a problem with the startup in windows xp

    OK, this is how it goes end-to-end.

    My brother is still using xp and one day, as his computer just took a dump...
    It starts, runs through the bios screen, then head to the start screen. As soon as there is almost no loading, a screen very very very very rapid rises. then it restarts... Well, the error, I discovered, was the unmountable boot volume error. Although it doesn't have the recovery disk for his computer... Is there a way can I fix?

    By the way I can't boot in any mode without failure or other way. I can't even a prompt back. I tried to use ubuntu, but I'm stumped on this review that I don't use on a daily basis, is close to 100%.

    FOR any help would be greatly appreciated.

    It's a shame that forums MS Answers do not ask for any information system when a new question is asked, because it knows absolutely nothing about your system (except it does not start).

    Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

    For this error, I would like to start here:

    Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

    Boot into the Recovery Console Windows using an XP bootable installation CD.

    If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).

    This is not the same as recovery disks that might have come with the acquisition of the system store.

    You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

    The ISO bootable image file you need to download is called:

    xp_rec_con. ISO

    Download the ISO from here:

    http://www.mediafire.com/?ueyyzfymmig

    Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

    http://www.ImgBurn.com/

    When you install ImgBurn, DO NOT install the Ask toolbar.

    Here are some instructions for ImgBurn:

    http://Forum.ImgBurn.com/index.php?showtopic=61

    It would be a good idea to test your bootable CD on a computer running.

    You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

    When you start on the CD, follow the instructions:

    Press any key to boot from CD...

    Installing Windows... going to pronounce.

    Press 'R' to enter the Recovery Console.

    Select the installation that you want to access (usually 1: C:\WINDOWS)

    You may be asked to enter the password (usually empty).

    You should be in the folder C:\WINDOWS.  It's the same as the

    C:\Windows folder that you see in Solution Explorer.

    The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

    For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

    A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

    In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

    Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

    Assuming your boot drive is C, run the following command:

    CHKDSK C: /r

    Let chkdsk finish to correct the problems, he could find.

    It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

    You must run chkdsk/r again until it finds no error to correct.

    Remove the CD, and then type "exit" to exit the RC and restart the computer.

    You have not to set the BIOS to boot the disk HARD since the CD won't be.

  • I have a problem with the download of Windows Vista Service Pack 2.

    Original title: Vista SP2 help for download

    I just download Vista SP2 on my Compaq Presario PC and it seemed to install correctly.  However, after it restarted my computer, nothing happened.  The computer was on, but he was not making a noise and the screen was black (and eventually appeared in mode 'sleep').  After about 3 hours of this, I restarted my computer manually. When I turned it on the Tower made a lot of noise (sounded like a blowing fan), but the screen remained black and didn't try again to exit mode 'sleep' (even when I moved my mouse and restarted my monitor).  I am unable to do anything on my desk now, then, what can I do to fix this?

    Thanks for the help.

    Hello

    See if that helps you.

    Do a Safe Mode system restore to before the problem started.

    http://bertk.MVPs.org/html/restoresysv.html

    How to access Safe Mode

    http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

    Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

    Here is the guide to repair Options using a Vista DVD from Microsoft.

    If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

    http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

    Table of contents

    1. Overview of Windows Vista repair options
    2. How to perform an automatic repair of Windows Vista using Startup Repair
    3. Advanced Tools Overview
    4. Conclusion

    If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

    Unfortunately, you have to buy it.

    Here is a link to it:

    http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    Installation of the Service Pack information for when you arrive, it fixed:

    Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

    It will also tell you which SP you have installed.

    Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

    Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

    Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

    Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

    Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

    This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

    http://support.Microsoft.com/kb/947366

    See you soon.

  • Problems with the help of Windows 8 Mail

    Hello.

    I encountered some problems with Windows 8 Mail that I hope you can help:

    I configured the other IMAP email accounts on my Windows 8 Mail. But facing problems with it;

    (1) emails took very long to cool. Also I'm unable to delete e-mails. As soon as I delete a message, it appears again and gives an error - Email is not available

    (2) cannot create new folders. Gives an error - the action I'm doing may not be completed.

    (3) I am also unable to save an Email Signature with links. It won't let me save a plain text signature.

    Y at - it a setting that I missed? I thought that the option of e-mail with Windows 8 has been very effective, that's why I chose to merge my other accounts work for this.

    Help, please. Thank you

    The Mail app can not handle the mail POP and is limited to Basic for IMAP mail functions. Use the post office to work. You'll have more control and features.

  • Before installing FF26 & the previous version, we did not have a problem with the pop-up windows or redirecting to other sites, now we do, how fix us this?

    We performed three different software malicious and software spies, trying to find a Trojan horse or another program that causes popups and many cases takes control and redirects the browser to other sites that we are trying to open. These programs have not found in the routines of trojan or spyware.

    As noted, this did not arise until FF26 and the previous version.

    Try to get rid of this extension 1.0 ArcadeParlor .

  • I have a problem with the help of Firefox. When can we hope to get answer to a question? Are there any available expert?

    I posted a 3 weeks ago and 9 people have also had this problem, but still no answer. My problem was that FF 5 open is no longer the pdf in the browser window and will not only install the patch supply, Dafizilla ViewSourceWith and greys on menu bar.

    Here are the steps I have done on my own system, several months ago. I could not view PDF files in Firefox with Adobe Reader and installed Foxit.

    1. Closing of Firefox (file > button OR exit Firefox > exit)
    2. If you don't the have not already done so, uninstall Adobe Reader 9.4.5 using Windows start > settings > Control Panel > add or remove programs, click the item, click on delete. You may need to restart your system.
    3. Open Foxit in your list of programs Windows start > programs
      • in the menu of Foxit, click Tools > Preferences
      • Click File Associations and be sure "view IN browser" is checked 'Make default PDF Viewer' and click OK
      • Foxit Reader nearby (File > Exit)
    4. Launch Firefox
      • Open the Control Panel Applications (Tools > Options > Applications OR Firefox button > Options > Options > Applications)
      • type of the pdf in the search box; You should see "PDF Foxit Reader"
      • in the Action column, click on the arrow down to the right end
      • Choose "use Foxit Reader plugin for Mozilla (in Firefox).
        • If the full name is not displayed, move the cursor to see the full name in a ToolTip box
    5. Test on a PDF from the internet
      • If there is no toolbar at the top of the display PDF in the tab (just a blue band), press the F8 key to get the basic tools bar, or do a right-click the blue top for display/no strip show other toolbars by clicking on it (checked = display;) UN - check = not displayed)

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  • I have a problem with the help of SkyDrive.

    Original title: SkyDrive

    I try to use SkyDrive, he always tells me that I am not connected to my PC I have download.

    Hi Pattom,

    I suggest you try the steps from the following link on how to share files and photos with Sky drive app.

    Tips from SkyDrive to try

    http://Windows.Microsoft.com/en-in/SkyDrive/sharing-files-photos

    I hope this helps!

  • I have a problem with the download of windows 8 with error code 49

    Can someone help me and explain the error code 49 please

    Hi John,.

    Please specify the application for which the error comes up.

    Until then see: error download or update Adobe Creative Cloud applications

    Kind regards

    Sheena

  • I have a problem with the canon 5dsr with Lightroom 6 connection I can't drop images directly in Lightroom the camera connected only by the EOS utility help

    I have a problem with the canon 5dsr with Lightroom 6 connection

    I can't drop images directly in Lightroom

    The camera connected only by EOS utility

    Help, please

    Hi mateuszm,

    You cannot drop images directly in Lightroom.

    You need access to the file menu in Lightroom 6 > import Photoshop > and choose your camera as source > select the images to import and import.

  • Help, I have a problem with the PS and CC - I get and error measure in PS - "this program cannot start because ONCoreFoundation8.dll - is missing... and it crashes, and now creative cloud will not be open to all."  I spent more than 2 hours to speak to so

    Help, I have a problem with the PS and CC - I get and error measure in PS - "this program cannot start because ONCoreFoundation8.dll - is missing... and it crashes, and now creative cloud will not be open to all."  I spent more than 2 hours to speak to someone in tech support that I did not understand, and I don't know what to do next. The tech gal was run, but once she hung up he returned to broken.  I have an idea, but that's just a guess - trouble started about the time I tried to open On1 of ps there has been a perfect icon effects 9 (for some reason, they decided to add the icon when I got it - I have 8) I clicked it and it loaded the update and then asked me if I wanted to try or buy - that's when I realized that I should have clicked on 8 and tried of back , but is either too late - I think, maybe this dll. 8 or 9 in with perfect On1 effects - and it has changed my settings in PS - and is the reason why it is not compatible - ideas? I have a pc with window7-Carol

    Try to run Photoshop without loading third-party plug-in. hold SHIFT keys when you start Photoshop.  The missing module is not Adobe software.

  • I have a problem with the numbers. Help, please!

    I have a problem with the numbers. I am trying to create a formula that can add a cell only when another cell with a pop-up menu returns on a specific pop.  I can't ignore the cell if it is not on specific pop upward.

    assuming the cell with pop's cell A1

    and if the context menu contains items:

    YES

    NO.

    MAYBE

    and the value you want to add in cell A2

    You can add the value in cell A2 when the context menu is 'YES' like this

    = if(A1="YES", A2, "") +.

    where is the expression that adds other cells if you want

    could be another cell

    = If (A1 = "YES", A2, "") + B2

    or a range of cells

    = If (A1 = "YES", A2, "") + sum (B2, D2, G2:H5)

  • I have a problem with the content of spam. Somewhere in the Fox appeared script that's choking me audio spam. Every 30 minutes he's playing an audio clip that is malicious.

    Hello.
    I have a problem with the content of spam. Somewhere in the Fox appeared script that's choking me audio spam. Every 30 minutes he's playing an audio clip that is malicious. I can't find the settings as it eliminated. Now, I don't have any plug-ins and Add-ons strange that were not initially in the Fox, but the problem is there.
    I use the Fox years. The problem, he had 1.5 months after Fox cleaning. If the problem can't win, I'll be forced to give up the browser, and I wouldn't.

    Could test you mode without failure of Firefox? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

    Does not work if Firefox: Hold down the SHIFT key when you start Firefox.

    If Firefox is running: You can restart Firefox in Mode safe mode using either:

    • button "3-bar" menu > "?" button > restart with disabled modules
    • Help menu > restart with disabled modules

    and OK reboot.

    Two scenarios: A small dialog box should appear. Click on 'Start mode safe' (not update).

    Any improvement?

    If the problem persists in Mode without failure, could reinstall you Firefox in this way:

    Clean reinstall it

    We use this name, but it isn't about deleting your settings, this is to ensure that the program, files are clean (not incompatible, corrupt or exotic code files). As described below, this process does not disrupt your existing settings. Don't uninstall NOT Firefox, that does not need.

    (1) download a fresh Installer for Firefox 38.0.5 of https://www.mozilla.org/firefox/all/ in an ideal location. (Scroll down your preferred language).

    (2) close Firefox (if applicable).

    (3) to rename the program folder, either:

    (Windows 64-bit folder names)

    C:\Program Files (x86)\Mozilla Firefox
    

    TO

    C:\Program Files (x86)\OldFirefox
    

    (Windows 32-bit folder names)

    C:\Program Files\Mozilla Firefox
    

    TO

    C:\Program Files\OldFirefox
    

    (4) run the installer you downloaded in the #1. It should automatically connect to your existing settings.

    Any improvement?

    Note: Some plugins can only exist in this OldFirefox file. If it is missing something essential, present in these files:

    • \OldFirefox\Plugins
    • \OldFirefox\browser\plugins

Maybe you are looking for

  • Can't hear any sound, volume keys use, etc.

    Using a retina 5 k 27 "iMac late 2015, 3.3 GHz Core i5 with Radeon R9 M395, El Capitan running. End of partitioned and installed Boot Camp with an iso of Windows 8.1 without any problem on OS X. When Windows 8.1 Boot Camp: keys of volume and numeric

  • Droid and T325 speakerphone

    Motorloa says they are compatible. Why not download from the list of contacts, and why can't I have voice dialing through the T325?

  • pop up menu drop-down

    I see that nothing has been posted on this during about a year and I was wondering if there was new information on how to solve this problem.  This menu appears constantly while I'm working, and it is impossible to get anything done.  I have not spil

  • How to use graphics.drawBitmap

    I have the 10 * 15 bitmap. If I want to draw a Bitmap occuping full displaywidth and the height of the image, I can do using this image. I tried to use this, but I can't get the single image to the required width. Method is graphics.drawBitmap (10,20

  • Update BIOS Pavilion d1010 is

    Hello I ve got a will-d1010 Pavilion which has BIOS version 3.06 27/08/04 installed, this is the latest version? Trying to find a newer version to download, but couldn't find drivers 2004 available on HP Web site.