I have a question about the network configuration

Similar Questions

• Newbe question about the network configuration of ESXi 3.5

  I have ESXi 3.5 works well on a Dell Poweredge T300 server.  I want to connect a Netgear ReadyNas Pro Business Edition for this Dell and connect by iscsi.

  I want to connect 1 network card of the ReadyNas for 1 network card on the Dell printer.

  My question is on the Dell when I go to the ESXi server and customize by pressing F2 and goto network settings I see the following:

  X vmnic0 embeeded nic1

  NIC2 integrated vmnic1 used by vswitch1

  I'm may be thick but can you explain what NIC on the ESXi server is used for access interenet and I need to configure for iscsi?  I thought that it should be obvious, but it is vmnic0 or vmnic1?

  Your ESXi host has two vswitchs configured what uplinks to physical NIC in the system.

  vSwitch0 what uplinks to vmnic0 (who, although a red x, indicating a problem seems to be very well) this vswitch holds you management interface (IP 192.168.2.107) and a portgroup of VM for your virtual machines. You also have an another vswitch vswitch1 what uplinks to GB NIC vmnic1. This vswitch has unused virtual machine port group. Also a VLAN ID has been set for this vswitch which would lead me to believe that VST is / was operating on that host in the past.

  Haven't you set up this? If this isn't the case, I would get with one who did.

  Order "the great vSwitch debate" parts 1 and 2 to start.

  http://kensvirtualreality.WordPress.com/2009/03/29/the-great-vswitch-debate-part-1/

• I have a question about the functionality of Oracle Identity Manager...?

  Hi friends
  I have a question about the features of Oracle Identity Manager.
  Here's my question:
  Self-management is possible network passwords (reset / unlock) with Oracle Identity Manager 9.1.0.2
  
  Very grateful.

  What Kevin suggested this means that you are managing accounts and their password by IOM. If your condition is the same then follow:

  Re: error during password reset using the self-service portal

• I have a question about the time machine. I recently updated my Quicken 2015 and there was something wrong with the update. Can I go back in just the Quicken file and restore it until I downloaded the update do I have to restore the entire

  I have a question about the time machine. I recently updated my Quicken 2015 and there was something wrong with the update. Can I come back in all the Quicken file and restore from time Machine before I downloaded the update to do, I need to restore the entire computer?

  Yes, you can just restore this file or application. Use Time Machine to back up or restore your Mac - Apple Support

• HTML (Web), I have a question about the models.

  Hello CC animate developers.

  New features are really good.

  HTML (Web), I have a question about the models.

  <! DOCTYPE html >

  < html >

  < head >

  < meta charset = "UTF-8" >

  < title > $TITLE < /title >

  < meta name = "ad.size" content ="width = $WT, height = $HT" > "

  $CREATEJS_SCRIPTS

  $SCRIPT_START

  var canvas, stage, exportRoot;

  function init() {}

  $CJS_INIT

  }

  $PLAYSOUND

  $SCRIPT_END

  < script type = "text/javascript" >

  "clickTAG" var = "";

  < /script >

  < / head >

  < onload = "init (); the body"style =" background-color: #D4D4D4; " margin: 0px; ">

  < a href = "javascript:window.open (window.clickTag)" >

  < div style = "position: absolute;" cursor: pointer; box-sizing: border-box; border: 1px solid #000000; overflow: hidden; height: $HTpx; Width: $WTpx; Background: rgb (255, 255, 255.0); "> < / div >

  < canvas id = "$CANVAS_ID" width = "$WT" height = "$HT" style = "background-color: $BG" > < / canvas >

  < /a >

  < / body >

  < / html >

  In the example above, the model;

  < Meta name = "ad.siz of" content = "width = $ WTI height = $ HT" > "

  and

  < Div style = "position: absolute;" cursor: pointer; box-sizing: border-box; border: 1px solid # 000000; overflow: hidden; height: $HTpx; Width: $WTpx; Background: rgb (255, 255, 255.0); "> < / div >"

  I use labels. But these tags in the template and import, it gives an error does not occur.

  I think it was a mistake. I want to help in this regard.

  $ HT or Properties $WT , I get an error when I use elsewhere.

  I think I should be able to use anywhere I want.

  The same problem here - I worked around by some DRM models with different values of ad.size, but it's a solution quite short-seight

  Also - you are not able to create the model with transparent background by removing style = "" background-color: $BG ' as it also throws errors - is the only solution that I managed to get updates style = "background-color: $BG; background: none; ", but it's a really bad way of coding things.

  It would be really great to have freedom in changing patterns.

• I have a question about the license.

  Hi , I have a question about the license.

  I'm going to play a game online non-commercial (real property services). And I'll use an Adobe Photoshop to make a picture. In this case, can I use single license (non-commercial)? If there is no problem, is it normal that I have use a student permit? Just for non-commercial and not business.

  
  

  Thank you.
  

  Yes, it's fine.

  You can even use a student for commercial work permit to make money while you are studying...

• I have a question about the delivery of the school.  If I start paying $19.99 a few months before that I control, I keep getting this price for the rest of the year?  Or will I stuck having to pay $50.00 per month until the contract is in place?

  I have a question about the delivery of the school for creative cloud.  If I start paying $19.99 a few months before that I control, I keep getting this price for the rest of the year?  Or will I stuck having to pay $50.00 per month until the contract is in place?

  Student discounts are good for a full year, without worrying if you drop out during this period.

  Mylenium

• My hard disk crashed - I have questions about the network now.

  My hard drive crashed on the computer that was the computer on which the files shared.  We had a T: climb together on this computer where we recorded the files and programs that we wanted to share.  My questions are this... We have replaced the hard drive on this computer.  Do I need to set up the drive w: in this computer once again, on the other computer as well, since I'm not there, and if so how do I?  Thank you.

  Hello

  Yes, you must redo the sharing.

  Most of the network news are stored on the system which is located on the drive crashed, and now he's gone.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• General question about DHCP network configuration

  In the past, I've always set up printers on network with a static IP address. With the proliferation of networked printers and progress in the printer driver software, I wonder if the static configuration is always recommended and necessary.

  Let's say I have install an Officejet 6500 wireless printer configured for DHCP and it gets an address 192.168.1.7. To continue, the printer driver is installed on the computers all networked and the printer port is listed as HPxxx192.168.1.7. After a break from running, say that the address assigned dynamically changes printer 192.168.1.5, leading to the question... to will the computers still be able to print to the printer who has now a new IP address? Basically, is the intelligent print driver so that he will direct the print jobs to the new address without additional configuration? (perhaps the answer varies depending on the printer model and the operating system of the client)

  I have installed HP network printers on a regular basis in a variety of operating system environments. So the question in more specific general. I don't feel a particular problem at this stage. But when I configure network printers in the future, an answer to the question will be useful.

  Thanks in advance.

  It depends on.  On older printers a static IP address is very important on the latest not so much. It is really dependent on the platform on which rests the HP software.  HP printers currentlyon market, in theory, do not need static IP addresses.

  In addition, when you set a static IP address, I always put one outside DHCP pool.  If the range is the range (.2 a.254) I reduced the scope and then put printers outside the pool.  This way there is never any conflict.

• Questions about the network resource class.

  I am running Windows 7 Enterprise x 64 SP1.

  In Windows Explorer, if I click on 'Network' in the navigation panel, it will browse the network and show me resources available network (see photo).

  The resources are grouped into categories, such as 'Network infrastructure', 'Media Devices', 'Storage', 'Computers', etc.

  I have two network storage devices: one of them is Western Digital MyBookLive (host name is "MyBookLive"), the other is QNAP TS - 469 Pro (host name is "QNAP").  I can access both by UNC (\\MyBookLive\Share, \\QNAP\Public, etc.).

  I noticed that 'MyBookLive' shows in the 'Storage' category, which is the desired behavior.  But "QNAP" shows as "other devices."

  My question is - how does windows rank network resource?  How does Windows know if a resource is 'Storage' vs 'Network Infrastructure '?

  Thank you very much!

  

  Hi Mihcael,

  Advanced networking issues are supported in the TechNet Forums. I suggest you send the request in the TechNet forums.

  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Hope this information helps.

• Hi, I have 2 questions about the miniatures in Muse:

  1. is it possible to have the photos in sizes different-how can I do this?

  2. is it possible to make an in black and white - where is the option of the desaturation of the image?

  Thank you in advance for your help!

  Maja

  The answer is 'no' to both questions, but the short answers are rarely complete.

  The slideshow widget does many things for you automatically, but it is limited to images and a single block of legend. It is also limited to all thumbnails and images of heroes have the same size.

  The composition widgets are in many ways more powerful and much more flexible than the slideshow widgets, but they do very little for you automatically. If you have a small number of images/elements to display, you can probably get what you are looking for using a widget of Composition as the trigger of a composition containers may vary in size and you can use different background for the States of the trigger images for the desaturated effect.

  Composition widgets are very powerful, but perhaps too labor intensive if you have a larger number of objects/images available.

• A question about the network card set

  Hi all

  In the vSphere Client, I can not change the type of a network card. But with PowerCLI, in case of power off the power of virtual machines, I can execute the following line:

  get-vm <virtual_machine_name> | get-networkadapter | set-networkadapter -type "vmxnet3"

  Is it correct method to change adapter type? (I need to keep tha MAC address)

  When you change the type of NETWORK card, Windows treats it as a new device.

  You will have to redo all the IP settings on the map 'new '.

  The easiest way is first get IP parameters, with the Get-VMGuestNetworkInterface cmdlet.

  Then change the type of NETWORK adapter and then redefine the IP parameters with the Set-VMGuestNetworkInterface cmdlet.

• I have a question about the export of a small movie to burn it to a DVD.

  OK, it's me again.  You have been so much help last night, I'm back for another piece of advice.  I made a movie of 23 minutes in Premiere Pro CS3 using 200 still images and music.  I realize that this program is much more that I need, but it's on my computer and I photo, I have the DVD and I have Movie - who are the major programmes for the small fast thing, that I do, but you can only choose 1 Transition between each still in all three of these programs, and it becomes very unpleasant.

  Therefore, I used the Premiere Pro CS3, but now I want to export twice - once for a website and once to burn it to a DVD to watch on a standard TV. Can someone walk me through there - way, way to many choices and I tried to read the 11 pages of the user manual - it may as well been in a foreign language.

  Thank you all.

  Michele

  Michele,.

  To go of CS3 (and CS2 Production Studio), it was included in the first installation discs. It's a DVD/BD big application creation. Now, you could not install, but you certainly get it. EncoreDVD 2.0, was also available as a standalone program, but from CS3, this is no longer the case.

  Good luck

  Hunt

• I have several questions about the configuration of Windows Media Player XP

  original title: subtitle in WMM as subtitle

  Hi, I use windows XP and when you use WMM under XP, I want that

  • legend is placed as the subtitle to the picture or just scrolling out of bottom right below on the left.
  • How can second thing, I change background for title slides
  • Third legend fonts
  • I can add some animation while going for tranmission

  Hello

  1. what version of Windows Movie Maker is installed on your computer?

  You want to return these items to help.

  Publish a movie in Windows Movie Maker
  Change Windows Movie Maker advanced settings

  Note: The items above are for Vista, but they are also applicable for XP.

• I have a question about the processors on my G50-80

  I have a G50-80 with a dual core i3 proccessor and I was wondering if I could get a processor quad core in my computer or it wont work. kind just a random question but if anyone knows it please share.

  According to the specifications indicated in the manual of use and maintenance manual CPU of your device is soldered to the motherboard and as such are not likely to be upgraded or replaced.

  If you're looking to improve performance, try to increase your memory (live RAM) or pass to an SSD.

  Good luck.

  CB