I have a SSIS package that uses ODBC to connect to a progress database that does not work in SQL Agent

Similar Questions

• I have a HPw2207 monitor that does not work in the vertical position operating under Windows 7 64-bit.

  I use a HP Pavilion p6-2033w PC. It was fine on XP. Any suggestions?

  Hello

  I had no problem downloading the driver for monitor for my PC.  You should be able to download and save the driver from the monitor on your PC.  Then try the installation again.

  Turn off your PC and try a reset monitor. Unplug the power cord from the monitor and hold the power button of the monitor for 30 to 60 seconds. Plug the monitor back in and it lights up.

  After you download on the Windows desktop, right of the mouse on the desktop and select the resolution.  You should be able to select the desired screen orientation.

• I have Photoshop CS and when I tried to open it I got an activation screen that does not work.  I have used this product for years and want to continue.  I paid for him and all of a sudden I can't use it!  Please help me to get the program I pai

  I have Photoshop CS and when I tried to open it I got an activation screen that does not work.  How can I get my program works?

  Hello

  Activation for CS and CS2 products now unavailable server.

  In this case the best you can do is to install Photoshop CS2 at the bottom of the link with the serial number that is mentioned on the Web site

  Error: Unavailable activation server | CS2, Acrobat 7, pass a hearing 3

• "Windows 7 Home Premium SP1 64-bit, an error message indicates" the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade.

  Tried using Windows Anytime Upgrade. Bought at Staples have product key is entered correctly. "Following instructions, accepted USA get error message says ' the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

  Which edition of Windows 7 is installed on the machine?

  Which edition of Windows 7 you are trying to do an Express upgrade to?

  Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed. Some licenses for Windows distributed to tertiary level students are not perpetual, which means that you cannot continue to use the software after a course or graduating.

  ---------------------

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Error, "the upgrade key you have entered is for an edition of Windows that does not work with Windows Anytime Upgrade." Enter a different upgrade key. "When you try to upgrade to Windows 7 Ultimate

  I have Windows 7 Home Premium and bought a Windows Anytime Upgrade to Windows 7 Ultimate. After extraction in the online store, I got a download link and product key.

  However, when I try to run the Express upgrade and enter the key that I got from the online store, the operation fails and the window says:
  "The upgrade key that you entered is for an edition of Windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

  What should I do?

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• No aero effect. I have a hidden partition on my HARD drive and my clone of samsung software does not work.

  Hello

  I used tune up utility (now uninstalled) and can no longer apply themes - I have try the effect Aero troubleshooting but convenience store says it cannot identify a problem. How can I get Aero goes again?

  2. I am trying to clone my HARD drive through of an SSD, but I have a hidden partition on my HARD drive and my clone of samsung software does not work. Any thoughts on how to work around this problem?

  Original title: two issues with win 7 Home premium

  Hello

  I used tune up utility (now uninstalled) and can no longer apply themes - I have try the effect Aero troubleshooting but convenience store says it cannot identify a problem. How can I get Aero goes again?

  2. I am trying to clone my HARD drive through of an SSD, but I have a hidden partition on my HARD drive and my clone of samsung software does not work. Any thoughts on how to work around this problem?

  1. with respect to the first question: your system files have been corrupted. Do a System Restore before the app was used.

  Try you "tune up", "maximize", "registry cleaners" or any what kind of app that promises to improve the performance of your PC somehow. None of them improve anything, often at the antipodes (as you discovered). Microsoft W7 already has all the apps. you need to keep your PC in tip-top condt. Try not to add anything.

  All these various named apps. are all 'snake oil' and very dangerous to use. However, you will find a lot of 'logic' online promo. material from "authoritarian" sites as to how will be beneficial for your PC. Not drawn in by these Advertorials :)

  2 the hidden partition is probably "restore to factory condt." partition rescue/recovery of the manufacturer of your computer. This can be used for the rescue of PC when things diabolically wrong with your operating system and cannot be set by any other means. You need an ISO image (clone) of the OS partition and MBR (master boot record) only, not the entire HARD drive.  Including the partition of relief are a very good idea but I'm not familiar with the software cloning you use.

  Download Macrium Reflect free edition for purposes of cloning and recovery and make the CD

  image recovery disk. He advises you to do so (by steps in the simple wizard driven) before using the program for anything regardless of whether the image.

  What computer brand and model you are using?

• Get "key to upgrade is for the edition of windows that does not work with Windows Anytime Upgrade"

  The PC is running Windows 7 Starter.  I'm trying to upgrade to Windows 7 Professional. I bought the card from Windows Anytime Upgrade Key.

  When I entered the PK, error, "put key in level is for the edition of windows that does not work with Windows Anytime Upgrade"

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  Additional resources:

  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-windows_install/how-to-successfully-do-and-troubleshoot-Windows/47e1943f-8255-452A-a7ad-2ae14dc974af

• I am running windows xp on a computer dell laptop and just bought an acer H213H-screen that does not work. __

  I am running windows xp on a computer dell laptop and just bought an acer H213H-screen that does not work.

  I downloaded the driver appropriate on the acer site and installed.  Also, I tried to reduce my resolution.  None of them have worked.  I get a message on the acer monitor that says "Input not supported"

  You check the display settings and make sure that you do not have your resolution to high for this monitor. Its got to many many times.
  Please rate me upward if you find my post helpful. Thank you!

• Built an MSI that does not work under Vista but works under XP

  We have built a MSI file that does not work under Vista but works under XP. No errors occur in the installation.  Running the installation "as Administrator".  But the application does not start without errors.

  You'd better choose to post your question in the developer forum. You can try the MSDN forums below, but you should definitely provide more details when you do.

  MSDN forums - http://social.msdn.microsoft.com/Forums/en-US/categories MS - MVP - Elephant Boy computers - don't panic!

• Update Vista error 80070507 and peripheral system that does not work

  Title: updates Windows Vista installs not because of error 80070507 and there is a system feature that does not work, but I don't know that that or how to fix it.

  Windows Vista updates do not install due to error 80070507.  He also seems to be a problem with a device in the system does not and I do not know that who or how to fix it.  Had to do a system restore not so long ago and I've had problems since.  Help, please.

  Hello

  -You are aware of any changes made on the computer before this problem?
   
  Perform the steps from the link below and check if the problem persists.
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
   
  Hope this information helps.

• I already have an annual subscription to the export of Adobe and Adobe track, but it does not work on my new computer (Windows 10). Help, please.

  I already have an annual subscription to the export of Adobe and Adobe track, but it does not work on my new computer (Windows 10). Help, please.

  Look under Tools.

• I don't want to start a discussion! I just want to help with a product that does not work!

  I don't want to start a discussion! I just want to help with a product that does not work!

  http://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  Mylenium

• One calling CFC-another CFFUNCTION using 'that' does not work

  Hello, all,.

  I have a CFC (let's call it test.cfc) who is supposed to manage a lot of internal calls to other CFFUNCTIONs.

  I had read that using "this.functionName (args);" should work.

  However, for some reason it isn't.  I always use ' components.compName () .functionName (args); "to make it work.  Pseudocode:

  <cffunction name="functionA" access="private" output="no" returntype="any">
      <cfquery name="getThese" datasource="#application.thisDSN#">
        SELECT * FROM tableA ORDER BY ID
      </cfquery>
      <cfreturn getThese />
  </cffunction>
  

  and

  <cffunction name="functionB" access="private" output="yes" returntype="void">
      <cfset tmp = this.functionA() /><cfoutput>#tmp#</cfoutput>
  </cffunction>
  

  This results in the error: make sure that the name is correct and that the component or interface exists.

  But the following works fine:

  <cffunction name="functionB" access="private" output="yes" returntype="void">
      <cfset tmp = components.test().functionA() /><cfoutput>#tmp#</cfoutput>
  </cffunction>
  

  Any suggestions as to why "new this.test () .functionA (); ' does not work?

  V/r,

  ^_^

  The this scope is public scope. You will need to change your functions to be access = "public"

  
  

  Note: This scope identifier functions as this keyword in JavaScript and ActionScript. CFCS do follow the Java class model and the this keyword behaves differently in ColdFusion and Java. In Java, it's a private, field while in ColdFusion, it is a public scope.

  Variable scope - ColdFusion and CFC, English documentation - Adobe learning resources

• I have used FireFox for Linux. No problem, works fine, but I also use FireFox to watch fles .jpg. Now, it does not work.

  I use Firefox to watch files .jpg, worked last week, so I clicked a button to FireFox update, and now it does not work.

  Hello!

  Try this link:

  https://support.Mozilla.org/en-us/KB/how-clear-Firefox-cache

  If doesn't work, try this:

  https://support.Mozilla.org/en-us/KB/reset-preferences-fix-problems

• using firefox 24, yahoo toolbar disappears and the keyboard does not work on some websites

  We have installed firefox 24, yahoo toolbar sometimes disappears. On some web site when trying to enter a password, the keyboard does not work until you double click of the mouse on the registration form. This on two different systems of windows 7. Each thin seemed to work fine before the update prior to the installation of 24.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  I hope this helps!

  Curtis