I have a TX2000 and the screen goes black when starting up - please help

Purchased 2008 HP TX2000 Windows Vista 32 bit 2 GB memory

Laptop trying to load Windows but fails when the lines are moving on the screen - the screen is black or with lines across and the computer is frozen

We put an adapter on the hard drive, it is difficult to see just looks like it's all a part, you should be able to just pull the part plastic on the pins and that will let you plug your new case, I've experienced the same thing about 3 years ago, it really seems that it's just one piece... It should first come fairly easily, simply pull... Please let me know if it works for you

Here's a photo I hope this can help, if it please click on accepted solution or glory, but only if I helped.

Tags: Notebooks

Similar Questions

  • Satellite L405D-11V - freezes and the screen goes black when you watch the video

    OK, so I have the Toshiba Satellite L405D-11V, I had a breakdown, basically, the computer freezes at any time and the screen would go black, with the fan and lights still ongoing, this could be at the start, or a few hours using the laptop, so I decided to ring Toshiba technology support and they arranged for my laptop to collect and be expelled for repairs.

    I was able to track repairs online via the tracking service and was able to see what they were doing to my laptop, he said that they have ordered a part, it was underway and the repairs are completed.

    However, I got the laptop back today, I turn it on, all right, I start using the cell phone that everything is fine, so I decide to watch a video on youtube, and it freezes again, so I turned off now pressed the power button, hoping he wasn't that a large, I turn back to and load the video once again it freezes and the screen goes black again, after that whenever I am watching a video or a game, it causes the computer to crash and freeze as before the repairs. So there is always a mistake, but I'm not sure what to do

    Its still under warranty, I bought the laptop from the Comet, but I really don't want to send the laptop for repairs again and find it comes back with the same fault, is it interesting sending distributed, maybe see if the comet will replace the laptop as its still less than a year to buy the laptop, or it'll just be useful to save all the hassle and buy a new laptop? If this fault happened to someone else, I could use you some help, and if someone could shed some light regarding what could be bad?

    Thank you

    Hey Buddy,

    You changed something on the configuration after you got your notebook back from repair? You update a driver, or something else?
    What operating system you use on your L405D satellite?

    To be honest it is really hard to say why it happens because technicians test to check if your laptop is running correctly.

    In my opinion you should try to update the display driver. Maybe it's the origin of the problem of s
    If this isn't the case, I recommend installing Windows from Toshiba Recovery disk to restore to factory settings. These parameters are pre-tested by Toshiba and should work.

    If you still have the problem, you must contact the technicians again. I mean you could track the online repair and according to your assignment, everything worked well during repair, so in my opinion he should t be a problem to contact guys exactly.
    Explain your very detailed problem. I think that everything can be clarified then. :)

  • a sound signal and the screen goes black after start

    Hi, I have a problem with my HP G62 a38se laptop pc.when I start my pc after startup pc saying not to answer with 3 beep sound(beep...beep...beep).after it displays a black screen and goes restart... plsss help me for this

    You are able to access UEFI to perform material tests?

    Perform the start-up and testing of the long system. Please post your results here.

    Kind regards

    ERICO

  • The screen goes black when I click and drag text, use the version on my 18.0.2. Thank you

    I'm entering text in the space of your question and click on a Word to drag it to another location, or if I am writing something in an email on gmail and click on a part of the text to drag it to another part of the text, the screen goes black as soon as I start to drag the text

    -Installing and re - install, it's what makes work - although I've still "hardware... use" unchecked.

  • Satellite U920T - the screen goes black when you drag the keyboard

    This morning, I turned on my U920T-10 days but the screen remained black.

    At first, I thought the screen was broken, but in mode 'Tablet', the screen became. Now when I slide the keyboard the screen goes black again.

    How can this problem be solved?

    Hello

    For me, it looks like a bad connection somewhere between the screen and the motherboard.
    This could be possible reason for failure to display while sliding in and out.

    I guess this can be resolved easily and I think that it is a job for a technician (authorized service provider). I recommend you contact the service technician in your country to get the laptop fixed. I hope that the warranty is still valid in order to repair for free.

    I hope that this can be corrected. I keep fingers crossed.

  • I click on "SET UP" on my Motorola XOOM and the screen goes black and does not settle. " I have uninstalled and installed the man times. What to do next?

    Cannot install Firefox Mobile o my Motorola XOOM. I have download and start editing the page and the page become black and back can not be configured.

    By clicking on the "Android Zoom" and select "Stretch to fill screen" and restart the tablet. The "Zoom to fill the screen" breaks Firefox mobile and it's a shame Android this suggests for our application on the first run.

    We are working to solve this with the creation of our Tablet UI.

  • system freezes and the screen goes black or watch horiz lines

    When you use my laptop I'll hear a little wink (could be in the 5 min or 2 h) as his and my screen will go completely dark or display horizontal lines.  This crashes the system.  I am unable to do anything.  The only way to restart is a strong power down.  No idea what is the cause?

    Hello

    The first thing you think when you have lines, etc. on your screen graphics/video drivers are corrupt and we normally recommend that you download the latest drivers for your computer from the website of the manufacturer of your laptop.

    But you say that you receive a beep at the moment that the problem occurs, which suggests a hardware problem (loose connection, inverter, backlight connection while your screen is black?).

    If it is not corrupted drivers:

    If under warranty, contact the manufacturer.

    If it is not under warranty, contact a good computer repair workshop, local.

    See you soon.

  • Movie Maker problem: music stops and the screen goes black

    Have loaded slides and music for Windows Live Movie Maker and I'm reviewing before creating the movie.  At one point, the music stops playing, but still slides.  If I stop and move the cursor over a photo and continue to play... no music will play and darkens the display great movie on the left.  Pictures always appear on the right.  Any thoughts?

    Maybe it's a compatibility issue with the format of the music file.

    The project plays correctly if you delete the file from music/s?

  • The screen goes black when the laptop is disconnected

    The LCD on my DV6 becomes black when the laptop is disconnected the power supply cord.

    Help, please!

    Hi, have you checked the brightness on the energy savings?

  • Update CC 2014 on the Mavericks. Now, I get the message "your computer restarted due to an error". When I try to reboot, my macbook freaks out and the screen goes black or I get pink and blue pixels. Help!

    I have no idea what to do now. I have a MacBook Pro running OsX 10.9.5

    uninstall all cc, clean by use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6 and then restart your computer.

    If that solves the problem, install the application of cc, Download Adobe Creative Cloud apps desktop | CC free trial Adobe

    Test your computer again.

    If no problem, install a program of cc using the desktop application.

    Restart your computer.

    If no problems, proceed with the installation of programs cc.

  • After I Log In, the screen goes black.

    After that I have enter my password and click on enter, it says welcome with the thing to load next to him. Then that disappears and the screen goes black and all I can see is the pointer. Sometimes the bar on the bottom with start on it, is also displayed. Any suggestions on what to do? It works fine when I run it in safe mode.

    original title: after I Log In, the screen goes black. Help me!!!

    Hi Kooper93,

    You can also try theclean boot to see if this is due to a program/process.

    Dena
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • screen goes black when you use windows live mail

    In the last week or two, the screen goes black when you use windows live mail. I use windows vista home and I suspect it has something to do with some windows updates, I installed recently. How can I find and fix the problem? Thank you

    View all Windows Live and Hotmail questions in the appropriate forum found here:
    http://windowslivehelp.com/

  • screen saver; have a screen saver password photos. As he passes, the screen goes black and stays black. What can I do?

    have a screen saver password photos.  As he passes, the screen goes black and stays black.  What can I do?

    have a screen saver password photos.  As he passes, the screen goes black and stays black.  What can I do?

    ===============================
    I don't know what is causing this problem but would be
    suspicious, it is related to a corrupted or obsolete
    video driver.

    Might be interesting to try to reduce your graphics
    Hardware acceleration instructions
    in the following article.

    How to put in back of graphics hardware acceleration
    http://www.pptfaq.com/FAQ00129_How_to_set_graphics_hardware_acceleration_back.htm
    (scroll down to: "If you are using Windows 2000 or XP")

    If they improve the question, you should look for the
    site Web of MFG. your video card
    a updated driver Win XP compatible video. Or...
    If your computer is a laptop... Search support
    site of the manufacturer of your computer.

    If you do not know the make and model of your
    Video adapter, see the documentation that
    supplied with the computer.

    Also you can find info on your video by driver
    go to Device Manager: you can launch
    By clicking Device Manager on... Start/run and
    type or copy / paste:
    devmgmt.msc
    And then press ENTER.

    Expand "Graphics cards" and right click
    the name of your graphics... then
    choose... Properties / tab pilot... FYI.

    You should find the make and model of your
    adapter display as well as the version of the driver.

    If the driver on the Web site is no longer
    current than you run...
    Download and install it. In addition, installation
    instructions that should be followed closely
    should be available on the support site.

    Once installed the new video driver... you
    can restore your full acceleration.

    Good luck...

  • my screen goes black when my laptop is in sleep mode and I have to move my mouse to get the sandbox screen

    My screen goes black and I have to move my mouse to return to the screen. It becomes a big problem when I watch a movie and the screen turns black during the good parts. How can I stop these interruptions?

    Hello


    It seems that the computer will sleep when it is inactive. I suggest you to change the settings on the computer's power options and check. Refer to the below links to change the settings of the sleep and other power options.

    http://Windows.Microsoft.com/en-us/Windows-Vista/turn-off-a-computer-frequently-asked-questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/power-plans-frequently-asked-questions

     

    I hope this helps.

  • Updated to firefox9 and now when I use extension of tree style tab the screen goes black, with the exception of the "window of the tab" and the part of the screen behind him

    Update firefox9. Using tree style tab extension. Everything works fine, except that my screen goes black when in 'tab window', with the exception of the window of the tab and the part of the screen behind him. Once out of the tab section everything comes back fine, but it is rather annoying. Checked homepage for the extension and have the updated version, firefox add-on page - it also says that it is compatible. Any ideas on that?

     Am realizing pages will stay on as long as I don't move the mouse,but as soon as I do move it,black goes the screen.
    

    Ok. A installed version 1.4? Manufacturers homepage. This is apparently what caused problems. Get rid of this and installed version 1.3? Since firefox add on the pages. Problems solved...

Maybe you are looking for

  • Z1 HP: Restore to the factory settings without disc

    Hello I'm trying to clean my computer (HP Z1) to its factory settings. I got my computer with windows 7 installed, so I don't have an instalation disc. I tried the advanced recovery methods, but I only have the options of using a system image I creat

  • Computer has stopped working properly after a Norton updated.

    Yesterday, my computer did a update of Norton, and since then I can't use my computer.  I double click on an icon & it just "chew" and does nothing.   Then I try & press "CTRL/ALT/DELETE" to stop this & nothing happens.  Or, other times I double clic

  • (Redirect) Possible to carry out work

    I have an Ispiron 570 and last year, I bought a dell graphics card, a Geforce GT 610, I realize that the computer is not a gaming PC, but it does the job, I was wondering that if someone could help me choose a graphics card that is a little better th

  • Digital networks.

    Ex2k3 CCM 4.0.2 (sr1a) Unity 4,0000 Sr1 I intend to deploy multiple servers of unity through several sites mirrored the existing Exchange design. I intend to set up digital networking mainly servers to take advantage of the license pool & of course a

  • Display the status of the connection on a virtual private network

    I hope someone can help me on my problem. I have two 2 PIX 501 between 2 offices with a VPN connection. In one of the offices users use Office remotely to connect to the other office. I m using restricted licenses on the pix so I m aware that there i