I have a Vista Enterprise desktop connected to the local network, but the notification icon still shows disconnected state

I have my Vista connected to the network and the "network and sharing Center" shows that it is connected and network is accessible, but the network in the status bar icon displays an icon showing disconnected state. How to solve this problem? Restart does not help

Guru

Check and make sure you have these services defined in this way. This initiative will establish whether there is a connection.

1 - on the road - network Manual connections
2 network list Service - auto-
3 network Location Awareness - road - automatic
4. bad Service Network Interface - on the road - automatic

Tags: Windows

Similar Questions

  • I have Windows Vista, can not connect, is the file 'another user '.

    Hi, I have Windows Vista Ultimate Edition.

    my computer restarted somehow while I was with her and now the only way I can connect is a folder named "other users". It asks me a username and password but I don't know what it will be. How can I solve this problem?

    Hello

    Try the methods here, but not exactly the same question that they should help to correct yours.

    Your files must be accessible by any ADMIN account in C:\Users if necessary to migrate
    to another account.

    -----------------------------------------------------------------------------------------------------------------

    You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
    Mode has no default password (unless someone has changed the password so it should be available).

    Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
    has been known to cause this problem.

    Error message when you log on a Windows Vista-based or Windows 7 using computer a
    Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
    http://support.Microsoft.com/kb/947215

    How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
    http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    How to fix error "your user profile was not loaded correctly! You have been connected with a
    temporary profile. "in Vista
    http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

    BE VERY CAREFUL IF YOU USE THIS ONE:

    DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

    How to enable or disable the real built-in Administrator account in Vista
    http://www.Vistax64.com/tutorials/67567-administrator-account.html

    Use the Admin account hidden to lower your user account APPLY / OK then wear again to
    ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
    above message.

    You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
    password (or two with the same password) use a test or difficulty to another.

    You can run the Admin account hidden from the prompt by if necessary.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
    always leave to an Admin who is not used except for testing and difficulty account).

    Difficulty of a corrupted user profile
    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    I hope this helps and happy holidays!

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • In Vista when I hover over the battery icon, it shows plugged in, does not support

    When I hover over the battery icon, it shows plugged in, does not support.  Why my battery not charging?

    Hi Retha_T,

    1. What is the brand and model of your laptop?

    2. when the problem started?

    3. did you of recent changes to the computer?

    You can read the following article and check if it helps to solve the problem:

    Solve battery problems

    Hope this information is useful.

  • I have windows vista Enterprise edition and trying to connect to a PPTP VPN, I get an error 691.

    I have windows vista Enterprise edition and trying to connect to a PPTP VPN, I get an error 691 name of user and password are fine, I can connect to the VPN on XP without problem.

    original title: VPN Error 691

    I was able to find a solution by the way that the domain has been configured. I was adding the complete domain name and extension (i.e. domain.local). The .local was me screwing up. I edited the domain field to only reflect the domain name without any extensions. One that I did this it worked like a charm. I have been using a VPN PPTP on a computer Server 2003 domain mixed with 2000 and 2003 domain controllers and Windows 7 Pro laptop computers. Hope this helps someone.

  • Remote Desktop connection abandons the connection permanently

    When I connect to my office with Remote Desktop constantly gives up the connection in a few minutes. I have Windows Vista. I heard there were problems with Vista and this program. Someone has the answer on how to fix this? I can connect with my Wired PC without any problem. Thank you!

    Hi Drifter5,

    Welcome to Windows Vista answers Forums!

    You can try the following steps and check if you can solve the problem.

    Here are a few possible causes of connection problems:

    The port of remote desktop can be blocked by a firewall.

    If you are using Windows Firewall, follow these steps:

    1. open the Windows Firewall by clicking the Start button, click Control Panel, clicking Security, and then clicking Windows Firewall.

    2. click allow a program through Windows Firewall. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    3. Select the Remote Desktop check box.

    If you are using another firewall, make sure that the port (usually port 3389) remote desktop is open.

    Remote connections might not be enabled on the remote computer. To resolve this problem:

    4. on the remote computer, click the Start button, right-click computerand then click Properties.

    5. in the left pane, click remote settings. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    6. under Remote Desktop, click allow the connection of computers running any version of remote desktop or allow the connection of computers running with NLA authentication remote desktop.

    7. click on OK.

    For more information, please visit the following links:

    http://Windows.Microsoft.com/en-us/Windows-Vista/changing-remote-desktop-settings

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Remote-Desktop-problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/Remote-Desktop-connection-frequently-asked-questions

    If you use a wireless connection, then try to configure Windows to manage your network connections.

    For more information, you can consult the following link:

    http://TechNet.Microsoft.com/en-us/library/cc505913.aspx

    Hope this information is useful.

    Jeremy K

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Desktop connects to the local wifi only, when the netbook to connect to internet

    Hello. My netbook and phone connect to wireless internet, no problem with my wifi network. And until recently my desktop computer connected ok too, using a usb adapter. However, I now have a problem. my pc connects to the wireless network, but only locally. Can anyone help please? There must be a setting that I or someone has changed?

    Hello

    You did changes to the computer before the show?

    Method 1: I suggest you temporarily disable the antivirus software or firewall and check if it helps:

    Disable the anti-virus software

    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    Enable or disable Windows Firewall

    http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

    Warning: turn off Windows Firewall/antivirus can make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.

    Method 2: reset the default router and check if this solves the problem:

    Next to the electric power plug, there is a pinhole reset button. Remove all the cables from your router except the power cord. Press reset button with a PIN for 10 seconds. Wait 10 seconds then unplug the router. Router will be at default values, reinstall using the software that came with the router. You may need to reinstall the software of NIC as well. Then write your password on a piece of tape and stick it to your router.

    Method 3: Try the steps in the link and see if it helps:

    Network connection problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

    Reference: Wired and wireless in Windows network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Method 4: Try the steps from the link and see if it makes a difference:

    Of network connectivity status incorrectly as 'Local' only on a Windows Server 2008 or Windows Vista-based computer that has multiple network cards

    http://support.Microsoft.com/kb/947041

  • Why Vista will not connect to the internet wherever I'm connected with my XP machine?

    Why my computer won't get online wherever I like Xp only

    Why Vista will not connect to the internet wherever I am?  I thought what to see that there is a link to a site to repair this, but when I found the site the link had disappeared.  Thank you

    Hello

    1 are you facing issue while trying to connect to public Wi - Fi hotspots or private home network?

    2 have you tried all of the suggestions of Fahimulla K?

    I suggest you to go through the steps mentioned in the link and the Coachman.

    Solve problems, find wireless networks

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

    See also:

    Wireless network card: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  • Network Vista and XP - connection to the network printer problem

    I try to print to a network printer connected to a vista from a computer xp machine

    Two computers on a network
    Vista machine is connected through the ethernet card and has a connected printer
    XP machine is via wireless network

    Both machines have the same network name "mshome".
    Open ports on the firewall and also left Software Firewall

    When I print a job, I see it be wound on the info from the printer on both machines, but then, it is automatically deleted.

    I am able to access the hard disks from two computers

    The printer works this way, when you share a printer between XP and Vista where the printer is connected to Vista, XP will communicate with the printer and its drivers Vista.

    So as I suspected it was due from pilots, in your case XP will be offered 64 bit readers which it does not recognize

    If we rely on the printer connected to the Vista 64-bit operating system operating system 32-bit, we need to install the additional drivers (especially the XP must be with 32 bits, only 32 bits of the operating system will not show if it's 32-bit or 64-bit)

    So in this case, you must right click on the printer on Vista and go to the sharing tab, and then click additional drivers, it will be the operating system and Version to select and you will need to select Windows XP x 86 and install the drivers

    Now your Vista will be the 32-bit and 64-bit drivers installed. Now, when you share the printer, when the Contacts XP Vista, Vista has drivers and it will be able to share the printer correctly. Anish

  • Cannot create the remote desktop connection in two different networks.

    Original title: Windows 7 PRO through internet Remote Desktop connection.

    Two windows 7 Machines Pro. They want to be able to connect to the main computer (Internet router) when they are away at their House on the other.

    It connects via DSL behind a router

    A modem connection cable Roadrunner

    The customer has upgraded to pro. Computers aren't workgroup and domain just PC. What would be the best way to have to allow them to connect to the router. I tried the port on the router, nothing helps.

    Hello

    Remote Desktop connection uses port 3389 in order to listen to the incoming connection.

    When done over the Internet, you will need to forward the port to the IP of the computer.

    Alas, a router can send a specific port only to a single computer.

    Since you have two computers, you must change the listening port for one of them to a different port number and transfer the new port to the IP Address of the computer.

    Let a computer uses the default port 3389.

    In the second computer, change the port to another port of your choice, http://support.microsoft.com/kb/306759/en-us

    Assign static IP to the computers (make sure that it is in the DHCP range).

    In the router open port 3389 to the IP address of the computer with the default setting.

    Open port you used for the second computer to its IP address.

    When you connect, if the connection is a connection by default, he would go to a single computer. When the connection is made with on the second track, he would go to the second computer.

    This page describes another remote program but it represents the principle more in detail,http://www.ezlan.net/vnc.html (towards the end of the page).

    Method to deal with the external IP address here, http://www.ezlan.net/myip.html

    Windows 7 RTD, http://windows.microsoft.com/en-US/windows7/allow-remote-desktop-connections-from-outside-your-home-network

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • I have to disable firewall to connect to the Internet. Also pop-up windows to make a dial-up connection, but we have a 2 connection wires to broadband?

    Program network networking Internet website website URL website network

    I have to disable firewall to connect to the Internet. Also pop-up windows to make a dial-up connection, but we have a 2 connection wires to broadband?

    Help!

    Hi Barry,.

    MSE is not the cause.  I suspect two things.  One, some ports in the firewall must be enabled to access the internet (your ISP should be able to tell) or you use a wrong port which is not activated, while the is correct.

    Second, you set up like a dial instead of a connection to the local network through the router (which must also be configured and secured if there is no wireless capability), and then the LAN must be connected to the internet.  Essentially, your network configuration is incorrect and must be corrected.  As a general rule, all you need to do is contact your ISP technical support and if you walk through the process over the phone.

    That's how I would handle it because even the experts here is perhaps not able to determine the appropriate settings for your ISP gave your versions of Windows and brands of routers and modems (and everything that needs to be connected).  They lose your business if you can't connect, and they have people who simply as for a life - often 24/7 - they are generally useful and really good in this.

    If that doesn't work (and I bet than that), and so that I could take you through it here in general with more information about your hardware, OS, ISP and other, this is the wrong forum for this.  You start here: http://answers.microsoft.com/en-us/windows/forum/networking?page=1&tab=all&tm=1300700638376.  Near the top, select your operating system from the drop-down menu to access the appropriate forum for your system.  Then post here like you did here, but give them all the details (manufacturer, brand and model of computer, network equipment, your exact version of Windows, what browser you are using and your network configuration).

    Good luck

    Kosh

  • Vista no poster more internet connection in the notification area (2 peak of small TV) - how can I get that back?

    I lost the icon of internet connection in the notification area (2 small pic of TV) - how do I get it back please?

    Hello

    There are different ways to fix it

    read all the information on the link below

    Try Method 1 or 3

    Method 1. :

    1. right click on the taskbar and click Properties.

    2 tab Area of Notification .

    3 check the (on) or disable (off) the options you want or do not want to display on the Taskbar Notification area

    Method of reading 3 etc. in the link below

    How to enable or disable the Notification area system icons in Vista

    http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  • I have CC on my laptop now have bought a new desktop computer and downloaded top CC, but failed to get a second organized plan

    I have CC on my laptop now have bought a new desktop computer and downloaded top CC, but failed to get a second organized plan?

    disconnect and then again on your desktop computer 2nd cc, sign, sign | Creative desktop application Cloud

    If this does not resolve the problem, attach a screenshot showing the problem.

  • I can connect to ad hoc networks, but cannot navigate

    I have a compaq laptop with VISTA home SP2 original base. I have can create and connect to ad hoc networks but once established connection, other computers on the network do not appear on my network card, so I can not navigate on their.

    they can see my laptop on their network, but they can't sail too not my camera. It is shown as "inaccessible" on their network

    I activated files and printers, sharing, file sharing and all the options.

    XP and 7 do not have this problem, vista laptop to have this problem

    Please help, I'm frustrated

    Thanks in advance

    Hello santu

    The link below has a multitude of steps that you can use to try to resolve this problem. I hope this helps.

    http://forums.techguy.org/networking/925138-solved-ad-hoc-network-CMPTR.html

  • I can connect to the local network, but not to the internet

    Why in an internet connection, I can connect to the Local network, but not to the Internet.
    I have valid IP address and configuration is good.

    I recommend you read some threads here in the forum about similar issues.
    If this problem occurs using the WiFi network, then check if you can use the connection to the local network.
    Using the WiFi network, you must check if the common WLan parameters are favourable;
    Check if the encryption key is right; turn off filtering by mac address, check the TCP/IP protocol settings if it has been set to automatic, disable the firewall settings, rest you WLan router, check if you connected to the right SSID.

    Good bye

  • HP OfficeJet Pro 8600: HP OfficeJet Pro 8600, connected to the local network but does not print a printer on the same LAN

    HP OfficeJet Pro 8600, connected to the local network but cannot print printer on the same local network.

    Work tried fixing it but all attempts fail.

    Firewall disabled.

    Printer recognizes the router's LAN.

    Was also pointed out that the port does not communicate, can not remove it; Cannot add another...

    Printer does not print.

    How can I fix?

    Hi @AnnisMonadjem,

    Welcome to the Forums of HP Support!

    I understand that you are unable to print to your printer HP Officejet Pro 8600. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    When you say 'LAN', are you referring to the network or you try to share the printer on the network?

    How is the printer connected? (Ethernet/WiFi)

    If you have noticed that the port is causing problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

    What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

    HP has several Officejet Pro 8600 series.

    What is the name and the product number of your printer? How can I find my model number or product number?

    • Update the firmware of the printer.
    • Don't hide the SSID (network name).
    • What type of encryption are you helping? HP recommends WPA and WPA2.
    • You have a double router broadband? Make sure that the two groups were not the same network name.

    If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

    To assign the static IP address, use the following steps as a guide.

    • Print a Page of Network Configuration menu of the printer front panel. Note the IP printer. IPV4 address
    • Type the IP address in the browser to bring up the SAP.
    • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
    • Select Manual IP.
    • Enter your IP address manual (192.168.0.232)
    • Enter 255.255.255.0 for the subnet mask, except if it is different.
    • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
    • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
    • Click on apply.
    • Restart the router, the printer and the computer.
    • Test printing and scanning.

    If the problem persists, download and run this patch rollup: resolving printing issues in Windows 7 and Windows Server 2008 R2

    • Try printing and scanning.

    In addition, if you are still having problems try the steps in this guide, HP printers - "offline" Status Message printer (Windows 7).

    Continue on, if the problem persists.

    Important!   Delete the temporary files and folders by using the disk cleanup utility

    1. Open the disk cleanup utility:

Maybe you are looking for

  • Problem of Exchange 2010 TLS 1.0

    Hi all I have a windows 2008r2 with exchange 2010 with RU11 TLS 1.1 and 1.2 active I installed the Update Rollup 4,6,7,8-v2, 10, 11 If I disable tls 1.0 mail will not be sent. This patch should be RU9. I thought that the UK is cumulative? I made a mi

  • Pavilion DV6-6119wm drive optical front

    I'm looking to sell my HP Pavilion DV6-6119wm, however, the optical drive does not work. I am able to find the optical drive without problem. What I need is the cover that goes over the optical drive. I can't find one on eBay and HP PartSurfer. Does

  • Missing ranks some excell spread sheet

    Just tried to use our HP ENVY impressions 4500 well with Microsoft documents, but what an excell sheet printing spread print all other lines line sometimes all 3 rows lines. Prints all the words, but not the lines?

  • key di conversion smarrita

    Salve a tutti,Kern una scheda audio Sound Blaster Z da some anno, ho smarrito scatola ed in essa it pure era (creed) the key by Magdalene casella degli multimediali musical...by riaverla sapreste tell come posso fare?Grazie

  • HO asked the restituzione della spesa cifra (RIGHT DI RECESSO)

    HO asked the restituzione della spesa cifra by price di Lightroom 6 licenza perpetua (No. CC) in Italia che definisce right di recesso if.MI avete better di seguire the istruzioni:(1) particular he number of series delprodottoOperation fatta my non e