I have a windows vista Home premium and want to connect to a network that is set up on a workstation after running windows 7 can not find the network why?

Similar Questions

• I am running Windows Vista Home Premium and want to know if I can upgrade to Windows 7 using Windows 7 anytime upgrade?

  I am running Windows Vista Home Premium and want to know if I can upgrade to Windows 7 using Windows 7 anytime upgrade [starter to home premium]

  original title: Windows Update

  I am running Windows Vista Home Premium and want to know if I can upgrade to Windows 7 using Windows 7 anytime upgrade

  No, it will not work.

  Windows 7 anytime upgrade: you have Vista or XP currently installed?

  If the product you have Windows 7 'Anytime Upgrade' does not allow to move from XP/Vista to Windows 7. You can buy the product at retail of Windows 7 Upgrade not the ' Anytime Upgrade '.

  Windows 7 'Anytime Upgrade' is for moving from one version of Windows 7 to a higher version, such as Windows 7 Home Premium to Windows 7 Professional.

  http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102

• Windows 7 can not find the network

  Hi guys I hope that someone can help me, I walked trough the forums but none of the above helped me. I also do not really understand some of them. But that's what happened. My internet was fine yesterday, I was watching some stuff on aliexpress when my mouse froze, I tried to restart the laptop, but nothing worked so I had to remove the battery. After that the computer took forever to turn back and when he did my computer did not find my wifi more. I ran the following anti-virus, I tried the steps in the verification of all past system. I went in Sync Center, I have trid addition in manual, I tried to search for a wifi switch (I don't think I have a) I tried to restart the pc and the internet, I tried the system restore, I don't really know what else to do. Any suggestions?

  Hi Kate,.

  Thanks for posting your query in Microsoft Community.

  I understand that Windows 7 can't find the network and I appreciate the efforts made to try the patches. Let me ask you;

  • Restoring the system led?
  • What exactly happens when you try to connect to the Wi - Fi?

  This could be due to several reasons, including any third party software conflict. Try the following methods and check.

  Method 1: Start the computer in Mode safe mode with network and check if the problem persists. If the problem does not persist in SafeMode with network, put the computer in a clean boot state and check.

  Step 1: Start the computer using safe mode with networking

  Safe mode with networking is an option of troubleshooting for Windows that starts your computer in a limited State. Only basic files and drivers needed to run Windows are started. Safe Mode with networking appears in the corners of your monitor to identify which Windows mode you are using. You can use the internet connection in this mode.

  Please refer to: , start your computer in safe mode

  Step 2: Perform a clean boot in order to avoid any conflict of third party software.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Method 2: Update the network adapter

  Step 1: Update the driver through Device Manager

  a. click Start , type Device Manager and click on it

  b. expand network adapters

  c. make a right click driver, and then click Update driver software

  Step 2: Install the Windows updates pending

  To check the updates:

  1. Open Windows Update by clicking the Start button . In the search box, type Update, and then in the list of results, click Windows Update.

  2. In the left pane, click check for updates, and then wait while Windows searches the latest updates for your computer.

  3. If you see a message telling you that important updates are available, or you say to look at the important updates, click the message to view and select the updates to install.

  4. In the list, click the important updates for more information. Select the check boxes for the updates that you want to install and then click OK.

  5. Click install updates.

     Read and accept the terms of the license and then click Finish if the update requires it. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Step 3: Visit the computer manufacturer's support Web site and install the latest network for Windows 8 for the same model of device drivers.

  Additional information:

  Wireless and wired network problems

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Need help badly - WIndows 7 can not find the Xbox and Xbox can't find Windows 7

  This is the case, for the last 6 hours trying to connect my PC and Xbox. I am running Windows 7 and tried everything I could find on the internet for this problem. All my services are enabled firewall disabled, participation is. When I look at my network card, I see my Xbox (see photo below). However, it is the only place I see. My PC is going through wifi and the xbox is connected to the router. Why is the only place where I can see the Xbox? Any help would be great, I'm about to throw this piece of * by the window.

  Hello

  The question you posted would be better suited in the Xbox Forums; We recommend that you post your question in the Xbox Forums to get help:

  Xbox forums: http://forums.xbox.com/

  Welcome to the Xbox support: http://support.xbox.com/en-us/home

  Keep us informed on the status of the issue.

• Windows 7 can not find the driver for shared printer hp LaserJet 3380

  When I try to add a shared printer on my laptop Windows 7, as a network printer, Windows 7 it locates on the network successfully, but I get the following error messages:
  Windows cannot find a driver for hp LaserJet 3380 PCL 6.
  The file ' *. INF' (unknown) is needed.

  The printer is connected to a desktop pc XP on my home network.

  I tried to attach the printer locally via USB to the Windows 7 laptop and loaded correctly the printer drivers and I printed it. But when I reconnected it the printer on the XP computer I got the error again.

  It is shared, not a network, printer, in order to put up with the TCP - IP option does not work.

  This printer successfully under Vista. I did a clean install of Windows 7.

  Thanks for any help you can provide.
  Jim

  The name of the 32-bit driver is different from the name of 64-bit driver.  You create a Local Port which will basically copy the formatted print data from the part of xpmachine.

  This is the KB how to perform this task
  http://support.Microsoft.com/kb/282842

  on Windows 7
  Add a printer
  Local printer
  Add to the local path
  \\XPMACHINE\printersharename (make a word share name or you must ' "quote all)

  Select the installed driver if you have connected the USB device

  Complete the wizard

  test page printed.

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• Windows 7 can not find the driver for the shared printer, IBM infoprint 1352

  through the network, that I have connected to my infoprint 1352 (on a XP machine), but when my 64-bit machine w7 is to install the printer, he said:

  'No driver found - windows cannot find a driver for IBM Infoprint 1352 on network. To locate one manually, click on OK. Otherwise, click Cancel and consult your network administrator. »

  When I click CANCEL, another window comes up with "unable to find the" * INF 'pilot'. "

  Help

  Hello

  The IBM infoprint 1352 is not compatible with Windows 7 64 bit and this must be the reason for the question.

  For more information see the link below.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=IBM infoprint 1352

  I suggest you to refer to the link provided below for the list of the drivers for the printer.

  http://www-01.IBM.com/support/docview.wss?uid=psd1P4000300

• HP 1315 all in one printer, windows 7, can not find the solution Center.

  Mr President

  It was working fine, 1315, printer all-in-one. lately every print, I had off and ON the machine. Today, to uninstalled and then downloaded from the additional driver section all the reqd. I installed. but the main exe from the file ' AIO_CDB_NonNet_Full_Win_WW_130_141 '.

  do not settle. ...

  " Solution Center is not installed and to get hp support, I downloaded hp printer scan cylindre diagnosis and when I run... another message comes" hp photosmart essential scan.msi isn't available... what shud I do?

  I don't know what to do next?

  kindly help.

  Hello pajitmenon,

  Seems that the installation of the software is corrupted somehow. I recommend "rubbing" the software current and 'nine '; To do this, follow the instructions below:

  1. click the Start button and type %temp% enforcement

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.bat

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download (again) the drivers and full software functionality from the link below

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-75052-1 & CC = US & DLC = in & LC = on & os = 4062 & Product = 374568 & sw_lang =

  10. run the download to reinstall the printer

• Director of Windows can not find the file

  I made a presentation / film in windows movie maker, and it worked fine.  Then when I went to access the movie a month later, all photos in the film are absent, and the Director of windows message can not find the file you want to locate the file... There are a lot of pictures, I don't want to go to each of them... What's happening on why it does not find the photo files now?

  I made a presentation / film in windows movie maker, and it worked fine.  Then when I went to access the movie a month later, all photos in the film are absent, and the Director of windows message can not find the file you want to locate the file... There are a lot of pictures, I don't want to go to each of them... What's happening on why it does not find the photo files now?

  =============================
  The source files have been moved or deleted?
  The only records of the files project makes it the path...
  check the source file.

  If you navigate to the folder, they are saved in...
  the path must be restored. You should not
  to go to each photo. John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Can not find the button Delete in my windows media player 11.

  I don't think you understand me... they ask something.no you won't miss them but my windows media player... when I right click on my files or files .it's not remove button only remove from the list button.when I click on this file disappears for a while but returned then again.this is not good because I want to delete a large number of my files in my library .so what is the answer do I have to remove windows media player, and then download it again.must be a response,.

  * original title - just had my question answer can not find the button Delete in my windows media player 11

  Hello

  ·          Are you a right click on the file in the playlist or library?

  Try the procedure described in the following article:

  You cannot view, add, or remove items from the Windows Media Player 11 library: http://support.microsoft.com/kb/925718  

• I have Windows Vista Home Premium and I lost my product key!

  I have Windows Vista Home Premium and I lost my case with the product key to this topic! I really need help! Can someone help me?

  If the operating system is running - use Belarc Advisor to retrieve the key. www.Belarc.com

  If the OS is always installed, but inaccessible, you can still be able to recover, depending on what is causing the problem - come back with details.

  If you have reformatted, about maybe possible get the key - but unlikely.

  If the HD is dead, or you have crushed the old installation, then you are out of luck.

• I am trying to activate windows vista Home premium and I give you the key that I have on the cd cover, but not activity

  can I buy new window vista Home premium and install, but same problem not activated and again once I buy Windows vista ultimate and install but I am facing the same peoblem I have no why it happens to my camputer

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.

• I have a HP Pavilion Windows Vista Home Premium, and the D: drive is full.

  I have a HP Pavilion Windows Vista Home Premium, and the D: drive is full. I don't understand how he got that way... but... I've never used windows to the top, however I do back up with my Norton Security.  I'm not a COMPUTER guru AT ALL and am very confused as to what must be saved for me to do a system restore.  I just made a backup on a 16 GB usb flash drive, which included photos, documents, email, contacts and music.  But what of my registry or my drivers I've updated on the latest updates of 2 years and windows?

  So in plain English for the layperson to the computer, lol, can someone tell me...

  1. where should I back up to? (windows, norton?)

  2. what should I back up? EXACTLY, please. lol (I have hundreds of games, I don't want to back to the top if possible)

  3 and... HOW MUCH ALCOHOL SHOULD I HAVE AVAILABLE WHILE TRYING THIS. LOL just kidding. Laughing out loud

  Hello

  Updates must be installed in a certain order and no Service Pack must be installed unless and until it is offered through Windows Update.

  However, try these options:

  Step 1: You can not reuse what already automatically downloaded and installed. You can however save updates and install them manually if you wish.

  Step 2: You can create a system image on the computer. A system image is an exact copy of a disc. By default, a system image includes the drives required for Windows to run. In addition, it includes Windows and your system settings, programs and files. You can use a system image to restore the contents of your computer if your hard drive or computer ever stops working.

  See:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-programs-system-settings-and-files

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  Also, you can see the following link for more information about Windows backup:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

• my computer acer have windows vista Home premium and I install Grand update pak2 and remained in safe mod can somebady help me

  my computer acer have windows vista Home premium and I install Grand pak2 and hestay update in safe mod somebady can help me

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• 80072efe I have Vista Home Premium and I can't download updates it keeps giving me this error code help!

  80072efe I have Vista Home Premium and I can't download updates it keeps giving me this error code help!

  ERROR_INTERNET_CONNECTION_ABORTED 80072EFE

  Service Pack 2 is installed? If it has been...
  How long this update problem occurred?
  What is the suite of security/antivirus installed and is a 3rd party firewall used?
  The current AV subscription and it detects malicious software the last time that the system has been analyzed?

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  You can reset the Windows Update components by running the Fixit on this page. But, if there is malware present, she will continue to reset the connection to the update servers:How to reset the Windows Update components
  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:
  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Vista firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

  MowGreen Services update - consumer safety

• I put a password for my computer with Windows Vista Home Premium and now I forgot the password and can not even enter the computer now. Is it all the same retrieve this password or what is the next step to use the computer again? __

  I put a password for my computer with Windows Vista Home Premium and now I forgot the password and can not even enter the computer now.  Is anyway to recover this password or what is the next step to use the computer again?

  Hello WillieBouma1,

  You can try this to http://www.wikihow.com/Reset-a-Windows-Vista-Password that will help you with your password (typed in) problem easily. Here is one link: http://www.youtube.com/results?search_query=trinity+rescue+kit&search_type=&aq=f for video detail to achieve this, if you have any problems. I used it a dozen times and it really works! Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)