I have a windows xp 32-bit sp3 and a 3CRUSB10075 com 3, which will not recognise wpa2-psk

Similar Questions

• Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another progr

  Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another program.

  Hi rkusa1,

  Thank you for using Microsoft Windows forum

  QuickBooks worked very well under Vista? It should also work reliably on Windows 7.

  However, you may want to follow these steps.

  1. right click on your quickbooks start exe file and open properties.

  2. on the Compatibility tab, select the compatibility mode and run this program in compatibility mode for Windows using the following link: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows (only if she worked very well with former Windows operating system)

  3. the control privilege level "Run this program as Administrator". Press apply/OK to close properties.

  4. start - devices and printers - add a printer - add a local printer - create a new port - local port and name it QBD_PDF.

  5. Choose install AMYUNI Technologies - Amyuni Document Converter 300 (click the button update windows if it is not on your list).

  6. If windows detects you already have a driver and then choose to replace the current driver. The printer name Quickbooks PDF Converter - do not share the printer - NOT set as the default printer. Finishing

  7. start right click - devices and printers - printer QB, choose printer - properties and go to the Advanced tab.

  8. remove the checkmarks in the 4 elements with square next to them (lower part of the screen) boxes, and then select "Print directly to the printer" press OK to close the window.

  9 restart you computer and open Quickbooks. Open the file - printer installation and make sure of Quickbooks PDF Converter is selected for any operation PDF printer that you use frequently. (on rare occasions, you will see not of Quickbooks PDF Converter on the list, reboot again and you'll get it).

  You can now perform operations of PDF in Quickbooks (works for 32 and 64-bit Windows 7)

  For a similar question, see: http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/2bd30024-0a64-4f6b-a831-8cb7c1e4cce5

  If the steps above do not post your question in this link: http://community.intuit.com/quickbooks

  Kind regards
  Aziz Nadeem - Microsoft Support

• I have a windows xp computer, I try to download adobe reader, but it will not allow me, so I can't open any files I download?

  It is said all the downloads are completed but when I try to open one, it goes to the box to open it, then when I do, I get a blank screen and says new tab!

  Hello

  -Did you change on your computer due to which the question has begun?
  -Which version of Adobe reader you are trying to install?
  -What web browser do you use to download programs?

  I recommend you follow the steps in these articles.
  The problems of download
  Impossible to download, to install Reader | Quick fix

• I want to migrate to windows 7 64 bit now all programs on my current windows xp 32-bit sp3?

  I want to migrate to windows 7 64 bit keep all programs and definition / references of the on my current windows xp 32-bit sp3?

  I want to migrate to windows 7 64 bit keep all programs and definition / references of the on my current windows xp 32-bit sp3?

  Is not possible.

• I have windows vista Home premium 64-bit installed on my sony vaio cs36gj, which was not install updates. Or running fixit is. How updated?

  I have windows vista Home premium 64-bit installed on my sony vaio cs36gj, which was not install updates. \niehter is running thing fixit. How updated?

  Hi Vishal,

  1. what happens when you try to install Windows Update and the fix, you get any error message or error code?

  2 have you made changes on the computer before this problem?

  3 is the limited issue during the installation of specific updates?

  Problem when installing windows update, see the following Microsoft article.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2: http://support.microsoft.com/kb/2509997

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services: http://support.microsoft.com/kb/906602

  
  Notes:

  The following steps include changing the system registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  CHKDSK: Data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.

  Microsoft safety scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.

  Keep us informed on the status of the issue.

• How can I retrieve or recover my file "Download"? I have a Windows Vista 64 - bit operating system. Thank you?

  I have Microsoft Windows Vista 64-bit operating system.

  I have lost my file "Download".  How retrieve/recover my file "Download"?

  Thank you

  Elliott

  e-mail: * address email is removed from the privacy *

  Hello

  1. did you of recent changes to the system before the show?

  2 are. what file download you referring?

  3. have you deleted the file using option DEL or SHIFT DEL?

  Method:

  If you have downloaded the file with success and deleted, I suggest you to check if the files are in the trash and check if it helps.

  If you are not able to find the files in the Recycle Bin, you can use all of the third party tools and check if you can recover the files.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  In addition, for more information, see the link below.

  http://Windows.Microsoft.com/en-us/Windows7/recover-lost-or-deleted-files

  Let us know if it helps.

• Internet worked well until I have Reinstalled windows vista 64 bit, now my Internet does not work, says that I don't have a driver from the Internet.

  Internet worked well until I reinstalled windows vista 64 bit on my Dell laptop, now my Internet does not work. Went into Device Manager and there is no network adapter. I tried to reinstall the driver that came with my laptop disk but it doesn't seem to work, says that I need an updated driver. I don't know what else to do, I have to install a new driver from the Internet? Ugh becomes very frustrated!

  http://support.Dell.com/support/downloads/index.aspx?c=us&l=en&s=Gen

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• I have portatil windows 7 64 bit y no puedo grabar DVD don't con nero

  I have portatil windows 7 64-bit y no puedo grabar DVD don't con nero Vision, Maneras despues pelicula al ir a grabar me saca el error y no me already.  Grabar CD y DVD worm if puedo, y con otros programas puedo grabar por Arum if. Windows DVD Maker, por lo no creo are culpa of the unidad of DVD RW Drive (D :). Me can help?

  Hello

  Sorry, this forum is in English only.

  Please select the language icon at the bottom of this page English and select your native language from the popup list to view the forums in the language of your choice.

  If you can't find the language of your choice, support for international sites additional options can be found by clicking on the following link:

  http://support.Microsoft.com/common/international.aspx

  Concerning

• I have OS Windows 7 (64-bit) and MS Office 2013.

  I have OS Windows 7 (64-bit) and MS Office 2013.

  I am installing BI Publisher Desktop (for the Word Plugin).

  What is the correct version.

  The plugins are stored in the admin folder and when those that are copied in my MS Office file I can't see them.

  Thanks for the help

• Bootsect.dat file is corrupt, NTLDR is missing/compressed on x 86 pc with Windows XP Home Edition Sp3 and Ie8

  I have a x 86 pc with Windows XP Home Edition SP3 and IE8.

  While preparing for a possible update for Win 7, I thought repartioning and "multiboot" my HARD drive.

  I tried to get WinXP operating as best I can.  I was also check out how to use the Windows Recovery Console to reinstall WinXP and transfer files to a clean reinstall.

  Found while searching "All boot paths" to Start\Run\msconfig\BOOT. INI that one boot path has been highlighted with errors indicating that "file is corrupt because playing a disc error has occurred" and that NTLDR is missing or corrupt.  In fact, it is blurred.  It points to "Recovery Console Microsoft Windows/cmdcon.  I've not used the Recovery Console, ever.

  I have a desktop Gateway 5310 S (detail) and no original XP disc, apparently.

  I have, but never used, a 4ea. set of recovery CD as of 12/05/05 I need to have created after purchase.

  I also had many, odd, problems that come and go, including worth displaying various websites, Yahoo Home Pages and E-mail that keep switch to compatibility mode or outright deletion.  The video and audio on Hulu and video-on-demand online services are always out of sync.  I have problems with editing posts on sites like this even if I can edit my profile fine pages.

  This particular set of problems started recently and very suddenly, from one day to the other.  It was after he worked actually pretty good for a change.

  I don't know how long the boot.ini file has been damaged, I actually discovered by chance.

  I can also not to reinstall some programs such as Family Tree Maker 2005 and 2008, when it was suggested to me by ancestry.com to uninstall/reinstall.

  I have the latest Java and Adobe Flash Player.  I've defragged and disc verified my discs.

  I used CCleaner to delete temp and unwanted files per day.  I ran Hitman Pro, MBAM, MBAR, MSE and SAS several times without detected virus or malware.

  And, as I mentioned above, I have problems with the editor of this site, right now.  Sometimes it just freezes and I have to leave to clear.  Other times it's duplicating entire sentences.  He also flip/flip flops between a Publisher full page and, as now, a half page window of the editor on the half left of the page.

  Suggestions from what people you can come would be greatly appreciated.  This gets really annoying.

  Thank you

  Vernon

  When you check the paths in the boot.ini file, and the recovery console is installed, you will always get an error message indicating that the startup path is not valid.

  If the recovery console is actually corrupted just to uninstall, you can reinstall or burn a cd with the recovery console.

  go here for instructions on deleting the recovery console.

  ===========

  Here's how to make a bootable xp recovery console cd

  Courtesy of JoseIbarra

  You need start by booting in XP using a CD Recovery Console, you can do (no XP media required) and run a chkdsk with error correction command enough times until it is clean and if it does not, you can create a new boot.ini file (this is usually one of two things).

  Here's how:

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  RC. ISO

  Download the ISO from here:

  http://www.thecomputerparamedic.com/?p=8    (courtesy of Daavee)

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient. If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  ===============

  as for the other problems:

  did you use Registry cleaners?

  These can damage your system

  You seem to be free of infection, it would seem that a part of your process cleaning has removed a necessary file.

  ===============

  Checkdisk with parameter/r should be run. and run it again until there is no error.

  ==========

  you are fully updated and patched to Microsoft updates?

• HP 15-p097tx: Synaptics TouchPad Driver for Windows 7 64 bit (sp69001 and sp67269) does not work

  Hello

  I just baught HP Pavilian 15-p097tx, which came with Windows 8.1. I like not this OS so I installed windows 7 64-bit Ultimate and after installation of the hp Synaptics TouchPad Driver (sp69001 and sp67269) support, the system Web site goes crazy, I mean windows deselect automatically and when I try to access the touchpad from the Control Panel options the system hangs. Help, please

  Thank you.

  Hi @SushmitMazumdar ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion Notebook 15-p097tx and the problems with the driver for the Synaptics TouchPad. If you uninstall the driver and restart the laptop, it will install automatically the best driver.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system.

  I hope this helps.

  Thank you.

• . What I have to buy windows 95/98 or y at - it a newer version which will still play older games?

  Original title:

  Windows 95/98

  Hello

  I currently have an Apple. There are a few games, I used to play (i.e. Rollercoaster Tycoon) which are mainly Windows 95/98.

  I have considered buying a less expensive to play PC. What I have to buy windows 95/98 or y at - it a newer version which will still play older games?

  I read a blog that says Windows 8 would not work with most, but perhaps Windows 7. I tried many different ways to play games on the Apple and in some cases, I can play them, but it will eventually stopped my computer during registration or something of that kind.

  Any suggestions? Of course, a suggestion at low cost is nice instead of buying a new computer.

  Good luck finding a windows 95 or 98.

  You'll have to do some research on Google or in the game forums to see what o/s these games could work. But I wouldn't count on much of this old games.

• If I have a windows vista dell optiplex 760 and 755 and when I reload with windows 7 can't me activation that is legal?

  If I have a windows vista dell optiplex 760 and 755 and when I reload with windows 7 can't me activation that is legal?

  "carlostorresWG" wrote in the new message: * e-mail address is removed from the privacy * _vista...

  If I have a windows vista dell optiplex 760 and 755 and when I reload with windows 7 can't me activation that is legal?

   

  If the machine came originally with Vista, and you charged it with Win 7 disc by the same manufacturer, it will go into a grace period and the non-genuine end - the key used for this installation requires data appropriate to the SLIC table in BIOS in order to activate it.

• Microsoft have all Windows 7 OEM ISO downloads and buy an a microsoft certified provider ok OEM key?

  Microsoft have all Windows 7 OEM ISO downloads and buy an OEM key provider Microsoft Certified OK?

  What I hear for question 1 is it a new Digital River (Microsoft ISO download service) since you can now no longer download the Iso of Windows 7 from Microsoft unless you have a retail key.  Question 2 is explicit thanks.

  No, there is no key only option sanctioned by Microsoft, so be prepared to find the rejected key if you try to download the ISO. The PID is actually built into the authorization key, all other sent by e-mail is meaningless

  Microsoft are selling more than Windows 7, all real dealers withdrew the product.

• I have LR 6 (upgrade LR 5and4) installed on Windows PC and switch to Mac. It will not install on Mac since the earlier version is installed. Is there a solution?

  I have LR 6 (upgrade LR 5and4) installed on Windows PC and switch to Mac. It will not install on Mac since the earlier version is installed. Is there a solution?

  Update should allow you to enter the serial number of the previous version during the installation

  If this does not work, you must communicate directly with Adobe

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html