I have acrobat installation, when I run the program it comes up with a script error

Similar Questions

• When I run the program it gives me a message (Please check your billing issues), but I already have a monthly payment. When I connect my account there is no billing issues. What should do?

  When I run the program it gives me a message (Please check your billing issues), but I already have a monthly payment. When I connect my account there is no billing issues. What should do?

  Please check the private message that I sent you.

• I am trying to install flipshare on my computer. I have vista. When I download the program and try it to install it, I get 2 errors.

  problems with windows install

  I am trying to install flipshare on my computer. I have vista. When I download the program and try it to install it, I get 2 errors. They are as follows...

  "There is a problem with the windows package install." A script required for this install to complete could not be run. Contact your personal support provider or the package. »

  Then when I click OK, this error comes in... "It seems you have an incomplete or corrupt installation. Please use Add/Remove programs to uninstall the previous version. »

  I don't have a previous version of flipshare on the computer, I deleted it and it isn't on the list of programs.

  I have installed all updates.

  I got a support to scan the computer and got a Windows Resource Protection found corrupt files but was unable to solve some of them.

  Does anyone have suggestions as how to do to solve this problem?

  I downloaded Speedy PC Pro in the hope that they could help and he did not. They resumed even remotly and could not understand it :(

  Any help? :(

  Jennifer

  Hi Jennifer,.

  Follow the steps in the article.

  Troubleshoot installing or uninstalling programs

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-installing-or-uninstalling-programs

• Signature problem when you run the program BluetoothDemo on Blackberry 8320

  Hello

  I try to connect from my computer to the Blackberry 8320 using a serial Bluetooth transceiver.  The "BluetoothDemo" program is not function properly.  When I run it, I first see a white screen with "Bluetooth Sample" at the top.  I click on the trackball and I get a menu with the options 'Listening to connections' and 'Full Meno'.  I click on listen for connections and a screen pops up that says "connect to an external device and then type something...» "I type something on the Blackberry and the letters appear, but no other options appear to verify a Bluetooth connection.  I have already associated the Bluetooth with Blackberry, but the connection failed appears when I run the program BluetoothDemo. When I click the trackball again, I see the full menu with "Serial Port close',"Get DB", etc..

  In my view, that there is a problem with secure API signatures.  Obviously the 'BluetoothDemo' program is not run after the first steps.  When I debug on Blackberry, I see the following output from the console, which leads me to believe that there is a problem with signatures:

  ocusHistory: Focus lost; Home screen App; Component net.rim.device.apps.internal.ribbon.launcher.RibbonIconField
  FocusHistory: Acquired Focus; Home screen App; Component net.rim.device.api.ui.MediaController
  JVM: bklt @286061: timer
  JVM: bklt @286061: idle 15
  JVM: bklt @292270: setTimer 15
  FocusHistory: Lost Focus; Home screen App; Component net.rim.device.api.ui.MediaController
  MWC: BluetoothDemo (4738) No sig 0 x 33
  From BluetoothDemo
  MWC: BluetoothDemo (4738) No sig 0 x 33
  BluetoothDemo (167) started
  BluetoothDemo (167) foreground
  FocusHistory: Acquired Focus; Home screen App; Component net.rim.device.apps.internal.ribbon.launcher.RibbonIconField
  FocusHistory: Lost Focus; Home screen App; Component net.rim.device.apps.internal.ribbon.launcher.RibbonIconField
  FocusHistory: Lost Focus; Bluetooth demo app. NULL component
  FocusHistory: Acquired Focus; Bluetooth demo app. Component net.rim.device.api.ui.menu.DefaultMenuListField
  FocusHistory: Lost Focus; Bluetooth demo app. Component net.rim.device.api.ui.menu.DefaultMenuListField
  BT: allocSerialPort a0d729a8
  BT: sdpAddRecord
  BT: allocSdpAttributeData
  FocusHistory: Lost Focus; Bluetooth demo app. NULL component
  BT: SppWrite-1 failed: 1
  Unable to write data. Exception: java.io.IOException: BtSppWrite failed

  I was puzzled at first running the program of BluetoothDemo and initially built and generated a file alx for the com_rimbluetoothserialportdemo program, which I think is used by the BluetoothDemo program.  The com_rimbluetoothserialportdemo program is currently connected to Bluetooth tx/rx, as indicated by the status of remaining devices firmly on instead of flashing (when BluetoothDemo runs the status light flashes, indicating no connection). When I switch between workspaces in which I have these projects, the set of keys is not signed, and I have to sign in again, which seems to cause the keys in the other workspace to become not signed.  As further evidence of the strange signature problem, sometimes when I run either on the Blackberry there is an error that says that the application is not signed.

  I want to delete the workspace and the file alx com_rimbluetoothetc could be a step in the right direction.  Do I have reason to assume that the 'no sig 0 x 33' is a problem with API signature secure?  Could BluetoothDemo access to com_rimbluetoothserialport and be denied because there no signatures?  Thanks for any help you can provide.

  Not sure that your reading of the code is correct.

  _dout.writeInt (JUST_OPEN);
  _dout. Flush();

  These two statements will write out - which seems to be the first thing the code does.  Then it goes into a loop of reading, but suppose a specifically formatted data.

  In my test, I removed these and replaced with something that I thought he would be working and I'm depending on the device.  As noted yesterday picked up O the data of a GPS puck - these things just send data, they never expect anything in return.  So my code looks like this:

  byte [] buffer = new byte [1024];
  for (;;) {
      int len = _din.read(buffer);
      String justRead = "Read: " + Integer.toString(len) + " bytes: " + new String(buffer, 0, len) + '\n';
      System.out.println(justRead);
  }
  

• Can I get a "schedule" of labview makes when it runs the program?

  Can I get a "schedule" of labview makes when it runs the program? that is how long it spends making each sub vi, and what order it's them.

  See you soon

  The execution Trace Tool kit is an add-on. If you do not your package of discs... maybe try a demo version?

  Spy OR get loaded with BT (or one of these things).

  Start > programs > National instruments > NI Spy?

  Ben

• I have can´t run the program after you install with creative cloud

  Hello!

  I have can´t run the program after you install with creative cloud, he do not appear the button to open it, but the status is installed, someonepeut help me with?

  Can you tell me what operating system you are using (windows/Mac) and some data on your computer (RAM, card graph, 64 or 32 bit,...)?

• How can I see the cluster move in Disk Defragmenter, when I run the program

  How can I see the clusters move in Disk Defragmenter when I run on my old computer I could see and my step dad had told me that anyone who has a computer can display when they run this program

  Due to popular demand, is no longer a part of Disk Defrag in Vista.

  Disk Defrag in Visa works quietly in the background.

  People complained the old Disk Defrag in XP style interface, as they had to do on her computer, not to watch the little squares moving.

  You can use 3rd party defragmentation products:

  http://www.SnapFiles.com/reviews/Auslogics-Disk-Defrag/adiskdefrag.html

  http://www.SnapFiles.com/reviews/IObit-SmartDefrag/iobitsmartdefrag.html

  http://www.SnapFiles.com/reviews/Diskeeper_Home/Diskeeper.html

  See you soon.

  Mick Murphy - Microsoft partner

• I downloaded Thunderbird, but when I run the program, nothing happens and it will not be installed.

  I tried to download and clicking on "run" in IE 11 and I tried using the current Firefox browser. Nothing works. I also tried recording and execution of the download itself. I click on "Thunderbird Setup 31.4.0" but nothing don't be going (waited 5 minutes). However, when I go to the Windows Task Manager, it shows "Thunderbird (32 bit)" in "background processes". I run on Windows 8.1 (64-bit). I've never used Thunderbird before, but I wanted to give it a try because the program e-mail, I use since nearly 20 years seems to be dead, and their society seems no more to support it. I saw good reviews for Thunderbird so what am I doing wrong? Any ideas?

  Restart your computer.
  When he is back yet once run the installer with administrator permissions.

• When I run the program I get a message "error loading C:\windows\dhax40.dll the specified module is not found.

  I have Windows XP service pack 3.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.

  A Google search on the name of the file means no "hits" which makes things even more suspicious.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it
  .  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

• When I run the Defragmenter I end up with large blocks of fragmented files that will not move much matter how many times I run.

  The report telling me I need to defragment this volume.  Total of 20% of fragmentation, 41% free space fragmentation 0% file fragmentation.  The last time I've run the defragmentation tool I don't remember this existing problem.  I think I would have noticed these large areas of red and he questioned.  It was about six weeks ago.  My computer worked more slow and sometimes simply hanging.  I downloaded Firefox a few weeks ago, but slowdown problems existed before this and I have not downloaded anything else except a program to deal with DOCX. files that do not seem to help me so I got rid of him. That's four months ago or not.  I ran so many tests I can think... hard drive check... cleaning disc etc...  I don't know how I got in this mess, nor how to correct.  I seems to me just that I close up with a disk full of files that are fragmented if I can't find a solution.  Any help would be appreciated more with gratitude.

  Please answer the following questions:

  1. What is the size of your hard drive (C :) and the amount of free space is left? (Open my computer, right-click on the icon for drive Local (c), select properties and declare what you see in the 'Général' tab for the used space and free space.)
  2. Even if you have the properties of the State open, (c) if the box down to "Allow the Indexing Service to index this disk for fast searching of files" is checked or unchecked.
  3. Right click on desktop, select Properties, and select the tab "system restore."  Is the drive (C :) followed by the system restore?  Assuming that the answer is 'Yes', make sure the drive (C :) is selected and click on the 'Settings' button.  What is reported as the amount of used disk space?  For now, simply "Cancel" your way out of these settings screens.
  4. You use integrated Windows XP Disk Defragmenter or are you a 3rd - party for this program?
  5. What version of XP, including the service pack is installed?
  6. What do you use to apply antivirus (include the version) and your membership is up-to-date?
  7. Have you scanned your system recently with MalwareBytes Anti-Malware or SUPERAntiSpyware?

• I've updated Muse CC 2014, but when I run the program makes shows a window saying there is a new version and an option to install now or later. When I click on install now, it does nothing and the old version of Muse is always apparent

  The Muse CC 2014 update does not work. He says his place check date - Green, but when I run Muse is the old version. Can you please help.

  Don't worry - I see now that there is a separate version installed. Thank you

• Computer crashes when you run the program

  Hi all

  I have a 5 year old computer that directs that a measure based Studio 6.0 program Visual C++ using 6071E PCI data acquisition. I did not modify this program but tried to install Labview 8.6 so that I can run some based Labview programs that I wrote recently. In the process, I had uninstalled Measurement studio accidentally but it then reinstalled back with the data acquisition driver. This program of Visual C++ 5 year, written by someone else, now causes the computer to freeze at random times once it begins to run. I tried everything from audit of spyware, lack of RAM etc but have not been able to fix it.  Could someone help me? I was faced with this for more than 15 days now...

  The former C++ program using NITimer (measurement studio provides it?) to do a function call every 25 milliseconds which checks the values of voltage DAQ and update the screen. Change the timer event to be generated every 75 millisecs led to the fall of 100% to 60% CPU usage. Accidents produce is no longer. How this incorrect code, used to work without crashes earlier remains a mystery to me. If someone knows the parameters to the MAX, or a place that makes a program to run in real time priority and therefore cause these programs to run without crashing, let me know.

  Thank you all,

  Yashwant

• I downloaded the file to click and install creative cloud, but when I run the program my computer starts to "blink". I get an error message, but it never starts to install it either. What is the problem and can I fix it?

  When I click on the icon to start the whole process, my computer starts to blink, but I get an error message. It does not begin to install creative cloud either. Any advice? This happened to someone else?

  
  

  Tyler, please try to remove remove creative cloud app - https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html & creative cloud install app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

  We would like to also know what version of OS are you using?

• Problem when I run the program

  

  This is the problem please help me

  Hey thanks

  I have uninstall Skype and re install

  now works

• I use Lightroom 5 on a PC. When I run the program, I get the message "Lightroom has encountered an error when reading the cache and must leave the preview. Lightroom will try to solve the problem next time. In french: Lightroom a r

  I have not found any solution. You have an idea? Thank you.

  Your preview cache was damaged and should be removed.

  Using Windows Explorer or the Mac Finder, navigate to the folder that contains your Lightroom Catalog - usually within my pictures or photos.

  Delete the folder with the name ending by Previews.lrdata. Do not remove anything else. Now, launch Lightroom.