I have an After Effects project and I want to re-do edge animate. What is the best way work for this?

Similar Questions

• I bought CS6 extended yesterday (yes I did). I have CS4 and many photos in bridge (keywords tag). What is the best way to make my photos in bridge cs4 cs6? Is there a guide how to go about so I do not lose one of my keywords/photos? WH

  I bought CS6 extended yesterday (yes I did). I have CS4 and many photos in bridge (keywords tag). What is the best way to make my photos in bridge cs4 cs6? Y at - it a guide how to: so I do not lose one of my keywords/photos? Who can help?

  Keywords travel with the file, so it shouldn't be a problem. Here's how export you key word of CS4 information and import it into CS6.

  How to import metadata and keywords Bridge to CS6 in CS4 so that I don't lose if CS4 is not

  I hope that your situation is not as complicated.

  Gene

• What is the best way to change this program and to read 1 sample of each channel?

  The initial program was conducted with NOR-traditional DAQ. I change it to DAQmx the best I could. The program, he is already the application of voltage to generate code (Daqmx Write.vi). But I have problems with the acquisition of tensions, give me readings rare (Daqmx Read.vi) I don't know if I have to make a (Daqmx start Task.vi) for each channel in the program or if I can make it work with a single. Notice I have no significant changes a lot because this program is already running in another lab, and they send us the program so we had no problems so much but rather than get the BNC-2090, they got the BNC-2090 is who uses DAQmx instead of the traditional. If anyone can help?

  A BNC-2090 is just a connection block.  It has no effect on the question of whether you should use traditional DAQ or DAQmx.  Which is determined by the DAQ card that you are connected to the terminal block too.

  You can refer to this document, differences between the BNC-2090 and connector BNC-2090 blocks has, but it's just saying to change the label of the Terminal Board to reflect the new DAQ cards.

  What problems are you having with the new VI you just posted?  You get an erro rmessage?  I don't know what mean "rare readings.

  You really shoud look at some cases DAQmx in the finder of the example.  Some problems that you are experiencing, is that your blocks of data acquisition are all kinds of disconnected.  Generally, you should connect the purple wire from your work function of creation, through the beginning, reading or writing, then the narrow task.  Many of your data acquisition functions are sitting there on the small islands now.  You should also connect to your son for the error.

  With DAQmx, you should be combining all your analogue channels in a single task.  It should resemble Dev0/AI0... AI7.  Then use a sample of channel 1 N DAQmx read to get an array of the readings, you can then use array of index to break.

  Other things you need to do is to replace the structures sequence stacked with flat sequence structures.  Turn on automatic growth for some of your structures such as loops.  At the end of the day, you might find, you can eliminate some of the structures of the sequence.

• I have an ERROR CODE 36 during the backup of my library of PHOTOS from one external drive to another. What is the best way to solve this problem? Also, what is someone used 'dot_clean '?

  I have a MacBook Pro that is primarily used for PHOTOS and use 2 external drives 1 for holding my PHOTO library and one for the back up. I have about 1 TB of data of photos. My back ups have worked perfectly since the establishment more than 12 months ago. However, I just got a CODE of ERROR - 36 problem which prevents the backup after that about 700 GB of data has been processed. I need to find a solution and I was wondering if anyone can advise me on that. I saw something called "dot_clean" on the web and I was wondering if it is safe to consider option.

  If the Photos or iPhoto is running, exit it and try the backup again.

• Try to line up and the image of the product turn to all air essentially uniform - what is the best way to do this in a jackpot?

  Hi all

  
  

  I recently did a photo shoot with about 150 different, but very similar products on a white background totally blown away. Each is turned a little differently and positioned slightly differently than others. I want all upward line them in the same place on the chassis so that when you view a catalog online page they appear uniform.

  
  

  What I come up with so far is to bring them into a photoshop file stacked in the layer, then slide guides where each corner should be (they are roughly square, but turned to a sort of diamond) and adjust each layer and turn to adjust. Subsequently I toggle visibility on each layer and save it in JPG format.

  
  

  Any thoughts on a better process? I have the creative suite together to work with.

  
  

  Thank you!

  Without some of the images to test, the following is offered as a possible solution that spin, align and Center the image. It's the strategy:

  Write an Action that will be:

  1. open the file and garbage of the lock.

  2 Cmd + click click the new layer in the layers panel to place a layer underneath the product.

  3. return to the upper layer and double-click it in the layers panel to bring up the layer Style.

  4. in the section mixture if at the bottom of layer Style, move left until that disappears white blown in the illustration the high gray-scale slider to the right page. (It will be the same for all).

  5 layer > merge down (image precision silhouette is now a single layer and has a transparent border)

  6 file > Automate > Crop and straighten photos (since the skin is transparent, it will turn the picture. Selection not required).

  7. save the file

  Then:

  Load files into a pile

  Choose all layers

  Select the Options toolbar move and align on the center vertical and horizontal (or low) of each image

  Save layers as files

• What is the best way to share a project hearing and/or creation with other users of adobe on other devices?

  I'm not a professional and I am very new to adobe, but I'm working on group projects with other people and they asked that instead of export of audio and video files, hearing, or first, I actually just give them the project so they ca works on it, as well in case any changes need to be made.

  Is it possible to share the concrete projects (not exports) WITH all the video and audio still in place with other people on other computers? If Yes, what is the best way to do this?

  Thank you very much in advance, even if it's completely impossible.

  Hello

  You might find better answered in the forums of Audition CS5.5, CS6 & CC to your question.

  Thank you

  Warner

• What is the best way to copy a large poster and print it?

  I am doing a project of great art (about 5 feet by 5 ft), where I'm going to learn things by hand and would like to make a copy of this project by analysing the it in the computer, or to take pictures high resolution project and their compilation together in the computer and then print the image at this size, or larger. So, I'll have the original, 5x5ft and one printed copy.

  What is the best way to achieve this?

  I heard that vector images are ideal for this, so is recommended for Illustrator this?

  I know it is a vector graphics program, but is it possible that I can take a bitmap of a scan or photo and somehow become a vector? If this is not possible, what are the recommendations would you?

  I have Illustrator CS2.

  I do not believe that the scanners large format are flat, if I'm wrong. In my view, they have a mobile head that scans the original bottle then made up the data with the software.

  It is not cheap, if the original can be easily damage they'll probably damage it unless you make sure that beforehand what they know about it
  and that they accept that they can scan without damaging it.

  Photography is a good solution if you know how the art of light and you use a long distance goal.

  The reason is shooting with a normal or wide-angle will give an effect of stretching the edges especially bandwidth due to the proximity of the camera to subject distance. The lens and the longer distance will accomplish the same capture without you stretching effect.

  Now, if you really have a service experience work fine arts or large commercial then scanning might be the way of.

  In both cases, I don't think you want to vectorize the art.

• What is the best way to have an indicator that scrolls the content of a table that is updated during the execution of a program?

  I have a program that runs continuously. During this time the errors are produced and I store them in a table. What is the best way to display the table in a window that the user can scroll upwards or downwards, while the program is running?

  Thank you.

  Hi chuck,

  If allowing you to feed two tables to the table you will see also all of these channels in the table

• What is the best way to make a second copy of a series of photos on a hard drive after that I imported and made changes?

  What is the best way to replace the second copies of photos created during import with revised versions? Export, seems to be an option, but is there a method named? I use Lightroom CC/6

  I don't think you understand the concept of Lightroom. The settings are stored in the catalog. They are not applied to the images. The catalog is the key. If the images in the main location are damaged or lost, then you can copy the backup images at that location and any adjustments that have been made will be implemented. The main thing you want to be sure to do is have a backup of your catalog, as well as a backup of your images. You can export copies of your images as JPEG, PSD or TIF images, and these copies will have all the adjustments included.

• What is the best way to get a SVG file generated from After Effects?

  What is the best way to get a SVG file generated from After Effects?

  Is there a script to do this? I use the SVG file directly in my work. I did research online, but find that it has no native support of EI to achieve.

  I found some scripts online, but they convert output Adobe AE to the JSON file. Is there something similar available for the SVG file?

  Thank you

  AE makes pixels not vectors, so it's not possible.

• I have Acrobat 9 on a PC, I no longer use. I want to download and reinstall on another PC. What is the best way to do it?

  I have Acrobat 9 on a PC, I no longer use. I want to download and reinstall on another PC. What is the best way to do it?

  Hi Chaos2015,

  Could you specify if you have Acrobat 9 Pro or Standard version.

  You must turn off Acrobat from the old machine and then install on the new of a CD/DVD and then activate with the same serial key.

  If you don't have installation media, you can download the Pro version of the below mentioned link:

  Download Acrobat products | 9, 8

  Please note that you can activate the software on the computers of two maximum. For example: your office at work and laptop at home

  Kind regards

  Ana Maria

• I want to rename and move files from a shoot 5 d. I would like to use the functionality of the increment to count, but since I have to get out of each file to the following file, it starts again at 1. What is the best way to do it?

  I want to rename and move files from a shoot 5 d on a new drive. I would like to use the functionality of the increment to count, but since I have to get out of each file to the following file, it starts again at 1. What is the best way to do it?

  HI -.

  As a prelude to 2014.0, we have added a feature allowing you to choose what number to start the increment of.  Look in the section ingest Rename dialog and change your preset. When you click the button, you should see the option "Custom Auto Increment". This will allow you to choose what number to start on.  We've also added a few newspapers to try to remember where let prelude last successfully interfere the operation by using this option. So, in theory, to remember the number for you. But if it isn't (maybe you want multiple kickoff ingested at the same time) you can always manually set the number to start with.

  Check that out and let me know how it works for you.

  Kind regards

  Michael

• What is the best way (and possible) to remix a song mixed

  GarageBand 10.1.1

  10.11.4 OS

  Mac Book Pro

  16G RAM

  Hobby old YR 68 recording guy/try to leave a legacy

  What is the best way (and possible) to remix a song mixed

  I have a song that is most often improvised, I was told that his cool, however, re-registration is not possible.

  After reading a lot on the mixture, I now hear where the uneducated choice and errors that I made which explains the sound "not as good" that the song is.

  Before I just jump in and try to undo the settings on the tracks (one is DRUMMER) to return to the raw track before effects/eq/compression ect. is is possible to do?  Opens the unfavorable mix, rename it, save it and just go to work and cancel or disable 'things '.

  The basis of the lean mixture comes even to the root where I 'hot' securities, (orange and red)

  I guess by now you understand my question and I am open to a favorable opinion.

  Thanks in advance for your help.

  jojoguiitar_mn_usa

  I read this question so many times and I can't seem to figure out exactly what you're asking.  You just ask if you can go back in your GarageBand project and edit your tracks again?  Of course, you can, why not you?

• What is the best way to import and export images from the 5 d Mark II?

  Hello

  I have just finished what I plan my first masterpiece of shooting film.  Shot on the Canon 5 d (1080 p, 24 fps), and the film looks amazing.  Now, I'm ready to start editing and now use creating lately, but I still have to figure out the proper conduct.  I want to know the best way to keep the resolution before I dive into this project.

  My questions:

  (1) what is the best way to start a new project and import the images without having to make while editing, in order to keep all the resolution and the originality of the source footage?

  (2) what is the best way / codec / format to export these images even once done editing to maintain than crisp 1080 p for which the 5 d is therefore counted?

  (3) what is the best way / codec / format for import and export / rendering between the first and after effects?  I speak especially of Visual effects and color correction.  I also a few sequences of 30 images per second that I intend to slow down in AE and then import into first.

  I know that it's wide enough, but as a solo Director I really need advice from someone.  Rarely, I finished my films with the same look crispy as images.  I need help of pipeline and really appreciate it!

  > used first lately

  A list of tutorial in the #3 http://forums.adobe.com/message/2276578 message

  1 - Please NOTE that the PPro CS6 screen may be a little different (I use CS5)

  For CS5 and later versions, the easy way to ensure that your video and your project

  See 2nd post for the photo of a NEW ELEMENT of process http://forums.adobe.com/thread/872666

  - and a FAQ on setting http://forums.adobe.com/message/3804341 sequence

  2 - BluRay... but I'm not sure if 1080 p is supported (I don't use of BluRay)

  1080 p http://forums.adobe.com/thread/995191 some work, some are not

  In addition, for upcoming posts, information FAQ http://forums.adobe.com/message/4200840

  In addition, read the metadata contained in the file http://forums.adobe.com/thread/1015001?tstart=0

  And finally, read Bill Hunt on http://forums.adobe.com/thread/919388?tstart=0 installation project

• What is the best way to move the data from the app and Server data structures?

  Hi guys,.
  
  I developed my application locally with Apex 4.2 and Oracle 11 g XE on Windows 7. Not far away, it is time to move the application to a server Oracle Apex. I guess that Exim is the way to go app. But what about the APA tables and data (tables/as 'customer' and 'account' created specially for the application)? I've been using a modeling tool, so I can run a DDL script to create the database server data structures. What is the best way to move the application data on the server? Is it possible to move the structures and data in a single process?
  
  Thank you
  Kim

  There is probably another way to get here, but in Developer SQL, on the navigation tree, expand objects until your table, right-click, and then click EXPORT... you will see all the options. It is a tedious process and it sucks IMO, but yes, it works. This is zero especially because 1) it's a table at a time, 2) If your data model is robust and has constraints and sequences and triggers, then you will need to disable all for the insert and we hope you can re-enable constraints, etc. without hitch (good luck, unless you have only a handful of tables)

  I prefer to use the oracle EXP command-line to export an entire schema, then the server target, I use IMP to import the schema. In this way, it is almost true. This makes the dirty life if you develop multiple applications in a single schema, and I felt pain - however - it is much easier to drop the tables and other objects is to create them! (thus, even if the process of EXP/IMP moved more than you wanted to "move".. blow everything you don't want on the target after the fact...)

  You can use method datapump oracle too.

  If not, what can be done, IF you have access to both servers of your instance of SQL developer (or if you can tnsping both already from the command line, you can use SQL * MORE), is to run a script that will identify the objects of your applications apex (usually by the prefix for the names of objects, such as % EBA_PROJ_ etc.) and do all the manual work for you. I've created a script that does just that so that I can pass data from dev to prod servers on a dblink. It is difficult because of the order that must be executed to disable constraints and then turn it back on and of course, more complicated if don't always precede you ALL your "objects demand '... (tables, views, triggers, sequences, functions, procs, indexes, etc.)