I have an Airport Express, which gives an unexpected error message when you try to connect to an existing network of WEP.  Any ideas.  Tried the factory returned. He was knocked offline when someone dug into the telco cables.

Similar Questions

• Error when you try to connect to a shared network drive by car on the portable XP from VISTA desktop: "not enough server storage is available to process this command."

  Hello
  I was able to connect ok in a shared folder on my laptop VISTA from my XP desktop computer.
  but when I try the other way around (to connect to a shared drive on my desktop XP FROM my VISTA laptop), I get the following error message:

  "The mapped network drive could not be created because the following error occurred: not enough server storage is available to process this command."

  Desktop is HP Pavilion a1410n
  Windows XP SP3 Home Professional 3 GB RAM
  Laptop is HP dv5z
  Windows Vista Edition Home Premium SP2 4 GB RAM

  I would like suggestions.
  Thank you very much.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Steve,

  Thanks a lot for the link to this article.
  It was most helpful.

  I also found this forum useful post:
  http://www.techsupportforum.com/Networking-Forum/networking-support/114373-cant-map-new-network-drive.html

  In particular, he said to check the event log of the computer that you are trying to connect to (the remote computer) to search for an event ID 2011, which would be entered in the time you finally tried to connect and does not.
  I did alt-click on the icon MY COMPUTER (from the remote computer) and the menu HANDLE, click the EVENT VIEWER folder (in the left pane), and then the SYSTEM folder under that.
  On the right pane, I found an ad for the event ID 2011 at the time wherever I finally tried to connect.

  To test this, I went to the VISTA laptop and tried to connect the computer to Office XP again, which gives a different error message on the VISTA laptop.
  When I went back on the XP desktop I tried to connect to and looked again to the event log, of course ANOTHER event ID 2011 has been registered with the new time of my additional attempt to connect.

  He confirmed that it was likely that the IRPStackSize was the problem, as your proposed article.

  Then I printed article how DO TO SAVE AND RESTORE the REGISTER to: http://support.microsoft.com/kb/322756/
  then backed up the registry (both by running a restore system to register and by exporting from the top level of the regedit).

  I then went in regedit on the desktop in XP for the
  HKEY_LOCAL_MACHINE\SYSTEM\CURRENTCONTROLSET\SERVICES\LANMANSERVER\Parameters file described in your article.
  There was NOT an entry for IRPStackSize in the right pane, so I followed the instructions in the add - it and change it to decimal 15.
  I rebooted and tried to connect but still got the same error.
  The article said that the default value is 15, so I assumed that adding input IRPStackSize to 15 has not changed anything.

  So I went into regedit and changed the value of IRPStackSize of 15 to 18, restarted and it solved the problem.

  I found that the following articles is also useful in the resolution of this problem (aside from the one you gave):

  http://support.Microsoft.com/kb/285089

  http://www.smartcomputing.com/editorial/article.asp?article=articles/archive/r0803/10r03/10r03.asp

  I typed this all this while this might help others who may encounter this same
  Error "not enough server storage is available to process this command" when you try to
  Map a network drive (or just try to connect) to a XP computer from another computer.

  Thanks much for the lead.

• When you try to connect to a wireless network I get this error: "If you want Windows to configure this connection, start the Wireless Zero Configuration service.

  original title: WiFi

  I want to connect to a wireless network on my laptop. When I go to the page of networks wirelss under the "choose a wireless network" it says "Windows cannot configure this wireless connection. If you want Windows to configure this connection, start the automatic Wireless Configuration service. My other laptop does not, and I don't know how to make the wireless network options appear. Any help is appreciated!

  Hi AshleyHenley,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You have security software installed on the computer?

  See the article and run the Fixit tool available, check if it helps.

  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless

  http://support.Microsoft.com/kb/871122

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

• My camera on the bridge that worked, but since I moved it gives me an error message when I try to take the file from the captain not found

  I used to be able to use the camera on my web cam, but now it does not work...

  Don't know why...

  He tells me that the file does not exist... Don't take the pic is also my microphone does not work either

  Hello

  1. What is the brand and model of the computer number?

  2 did you change on your computer?

  I suggest you to update the drivers for the webcam and check.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I also suggest you to perform the system restore and check.

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

• "Unexpected error" message when running Extension

  When I try to run an Extension in Photos (DxO OpticsPro) I get the message "Cannot edit with DxO OpticsPro for Photos".  The message reads, "an unexpected error has occurred." Can someone please help with this?

  ... The error does not appear for all the photos I try to open.  Only for one so far...

• What should I do when I can not enter a password when you try to connect to a wifi network

  I'm currently traveling but I am unable to choose a network from the list of networks that appear.  (I entered it from a family computer.) Then when I click on connect, it takes me to the screen to enter the password.  However, it won't let me type the password.  I tried to copy the password of a MSWord document and it copied 8 nine characters, but still wouldn't let me add the last character.  Any ideas?

  I must point out however that I have just went to Starbucks and was able to connect to their wireless network without having to enter a password, and I don't have a problem connecting to my home network either.  Thanks for your help.

  Jim

  Hi Jim,.

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, you have problems to access wireless networks.

  This problem may occur if there is some incorrect settings in the network.

  Perform the steps from the link below and see if it helps.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  Answer to us if you are experiencing problems with wireless networks or any other problem of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• Java Virtual Machine Launcher displays, "Unable to access c lib\MP3Rocket.jar" from recently, I get this error message when I try to open my file sharing program "MP3 Rocket". HOW CAN I FIX OR STOP THIS?

  I tried to uninstall and re install MP3 Rocket and the same error message appeared.  The error message window is titled "Java Virtual Machine Launcher" and the error message said: "Unable to access c lib\MP3Rocket.jar" Please HELP!  Any ideas on a fix so I can get my music back!

  Hi I have just solved this problem by going to Java Virtual Machine Launcher poster, "Unable to access c ... . and from there to the MP3 Rocket help site and the connection. From there on, I was able to download MP3 Rocket Pro, but I've changed where I put it, I created a new thing entirely next folder that I knew I had the program back and working again. I did it without having to go through the default programs bit. Give it a try. It is simple and easy. Sometimes I think that we have an overload of information and I found happened to me. I'm not a computer whizz at all. Just a cranky older woman tired of all this.

• I'm trying to convert a word doc into a pdf file (which I've done 100 times) but now when I connect and press 'convert' after selecting the file it gives me a error message that says "player doesn't have the ability to access this service?

  I'm trying to convert a word doc into a pdf file (which I've done 100 times) but now when I connect and press 'convert' after selecting the file it gives me a error message that says "player doesn't have the ability to access this service?

  Install and use Acrobat Reader DC. You can not use previous versions more.

• I am a student and I have a free subscription to adobe (who, when I go into my membership, says I have free membership of Creative Cloud) again, when I try and download the Adobe Photoshop CC 2015, it gives me an error message that my trial has expired an

  I am a student and I have a free subscription to adobe (who, when I go into my membership, says I have free membership of Creative Cloud) again, when I try and download the Adobe Photoshop CC 2015, it gives me an error message that my trial has expired and then heading to an error 'No subscription found' when I type in my ID. My other updates for the applications worked and they open yet Photoshop is not.

  Hello

  Free trials of Adobe are for 30 days by app and it's clean and not mail electronic id specific, which means that if anyone with any email used Photoshop test on your machine, then it won't work not it will show you that the trial is expired.

  But if you think that this is the first trial for Photoshop has been downloaded on this machine and is not expired, please see the links below:

  Adobe trial software has expired at the beginning

  Please HELP in "Trial Expired" is anyway to reset my account so I can reuse them?

  Let us know if that helps.

  Kind regards

  Bani

• When my DVD drive would not work, I bought an external. I get the same message when I go into properties. Pilots have been disabled.

  When my DVD drive would not work, I bought an external. I get the same message when I go into properties. Pilots have been disabled.

  Hello

  Check with the manufacturer of the system, their online documentation and drivers, diagnostics, and
  Ask problems known in their forums. You may also check those similar
  resources on the site of the manufacturer of the actual device (for the original drive).

  =================================================================

  It is not surprising that the same issue affects the old and the new drive.

  This problem may be caused by the presence of too many CD/DVD programs competing for resources,
  especially by these programs that run at startup.

  Even if the error is not Code 22 check these:

  Code 22
  http://TechNet.Microsoft.com/en-us/library/cc731267 (v = ws.10) .aspx

  How to fix the Code 22 errors
  http://pcsupport.about.com/od/errorc/a/code-22-error.htm

  How to enable a device in Device Manager in Windows Vista
  http://pcsupport.about.com/od/windowsvista/HT/enabledevvista.htm

  If necessary:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

   

• My iPad is no longer the automatic backups in icloud. When I try to do it manually it gives me an error message

  Automatic backup on icloud no longer works. When I try to run it manually it gives me an error message

  Please check that your device is correctly connected to the wireless internet (settings > wifi) and is plugged into a power source, check also that you have enough space in iCloud for your back upward.

  You can check the space available in settings > iCloud > storage and the space needed for the next backup to the settings > iCloud > storage > managing storage > backups > appliance > Back Up Options > next backup size (wait for the spinning until the gear icon).

  Assuming that you are eligible for iCloud upward, you should try a forced first stop, hold down the buttons side in top and home together until the unit stops, then restart by pressing the side/up button.

  Then, try to connect the device to a new location (different WiFi network)

  If your backup continues to fail, you can try to disable the backup on your mobile device (settings > iCloud > BackUp), reboot the device and then turn on BackUp on new.

  If it does not help disable backup again, remove your existing back to the top of the settings > iCloud > storage > managing storage > backup > appliance (scroll down) > delete backup, restart the device and then turn on BackUp.

  If you are unable to make a return to the top, try to connect on iCloud (settings > iCloud (scroll down) > Sign Out (you will need to enter your password at this point), restart the device and sign in iCloud to settings > iCloud.)

  The next thing to try would be to restore your network settings. (Settings > General > reset > reset network settings)

  Reset your network settings will erase your cell phones and wireless network settings, including saved networks, passwords for wifi and VPN settings, that you can use. It will affect to the Internet but will not be an impact on telephone services because these settings are automatically configured by your carrier. It may take a few moments to enter again all your network settings, but it shouldn't cause you any major problems. If you are comfortable re - enter your network settings, you can try this step earlier in the troubleshooting procedure, i.e. after the forced shutdown suggested above.

  If this does not help, try to disable some elements for the back upward in a model to try to establish if your problem is caused by specific data on your device. You can do it with settings > iCloud > storage > managing storage > backup > this device > Back Up Options.

  If you are still not able to perform a backup from iCloud, you can try to restore your phone which you should do by making an iTunes backup via your computer and restore from that.

  Be able to go back to the cloud can be very useful, especially if you have access to a computer or rarely have access to one, however unless you need specifically to use iCloud to go back, you'll find a backup on iTunes much more convenient and possibly more reliable. However if you save up to iTunes be sure to encrypt the back upward if you want to keep your data on health and passwords etc.

  More on v iCloud iTunes backup

• Problems connecting to an AirPort Express, which already extends another Express.

  Hey everybody, I just want to know if it is possible for an Airport Express to connect to an OTHER Airport Express which is already expanding an Airport Extreme.

  Post edited by: Kas1302

  It is possible for the Express to connect to another Express which is the extension of the network already... BUT... the 'last' Express will not extend the network once again, if that's what you're really asking here.

  This is because Apple doesn't allow the wireless signal to be extended only once, not two.

  It would seem that the last Exrress is the extension of the network, but it is not.  It is 'join' the wireless network, and when he "joined", it doesn't provide any additional wireless signal coverage.  However, the last Express could still work for AirPlay, or a USB printer remotely.

  Feature of "extend" Apple works as the hub and the spokes of a wheel.  The main router is the 'hub', and an Extender would be located at the end of "sticks". As such, he communicates directly to the main router.  You can have multiple devices, the expansion of the network at the end of the other rays, but each Extender must communicate directly with the main router.

• Just recently, I receive the following error message when you try to access the web sites. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" then I have to click ok. There is a problem with some plugin?

  Just recently, I receive the following error message when you try to access the web sites. I use Firefox browser version 10.0.2. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" as the web site page is displayed in the browser winder. So, I have to click ok. Any link/website I go to what happens. There is a problem with some plugin?

  It is only a problem for the SiteAdvisor users who are still on 3.4. This problem is resolved in the latest version of SiteAdvisor, which is 3.4.1.195. Go to http://siteadvisor.com and click on download. This will fix the problem.

  Meanwhile, SiteAdvisor team will push down a JS update in the coming days 1-2 to automatically resolve this problem in version 3.4.

• I have an AirPort Express 802.11n (I just got 1st generation) who does not appear in Airport utility? The Express flashes an orange light.

  I have an AirPort Express 802.11n (I just got 1st generation) who does not appear in Airport utility?

  The Express flashes an orange light.

  I tried to reset to factory by using a paperclip for a little more than 10 seconds (green LED flashes).

  The Express flashes a light - orange after the reboot - that seems normal to me.

  I use an iPad or MacBook Pro (without port cat 5) set up.

  I would like to extend my WiFi network and stream of music with it.

  Read the manual and did some research but I'm stuck.

  Thank you for taking the time to help...

  NOTE: I also have a second generation version which works very well.

  Let us first make sure that you really have a 1st Gen AirPort Express. To do this, look for the model number on the side of the Express. It is difficult to see, with grey lettering on a white background, but the number starts model with an 'A' followed by four digits.

  You do not want to see A1264... not A1084 and A1088.

  Share your findings.

• I run pc photoshop CS6 on my windows 7 (mac). I have stupidly? the Applications Adobe Manager to update all my Adobe apps. Since that time I now get the following error message when you try to create the Contact Sheet II in my SP6 or 64 PS5.5

  Greetings

  
  

  I run Photoshop CS6 on my windows 7 Ultimate (MacPro 2008 via Bootcamp). 12 GB of ram, 512 on the video card. A lot of disk space. None of the questions of knowledge, viruses, malware, etc.
  

  
  

  I have stupidly? the Applications Adobe Manager to update all my Adobe apps. Since that time I now get the following error message when you try to create the Contact Sheet II in any of my SP6 or PS5.5 64-bit or 32-bit versions. «Cold is not complete the plug of command because Photoshop was unable to locate the plugin JavaScript» Re, I installed the latest update, but no change. My installation is built on CS4 extended, then with a version Standard 5, 5.5 and 6 facilities upgrade.

  
  

  The Contact Sheet function was working well, until I ran the updates.
  

  
  

  I'm in a bad place, as I am in the middle of multiple projects, everything I need to create Contacts for.  I thank any help or give advice on how to fix this...
  

  
  

  Help, please!

  Try to run Photoshop with the SHIFT key is pressed and skip loading part tird plug-in and try to use the Board contact II.  A version of plug-ins from third parties have been known to break Photoshop Scrippting.