I have an error, missing wxmsw262u.dll and I don't know how to fix this error, please help.
Try to find a solution to this problem and do not receive the case? I have read that I need to get the file off her recycle bin but that is empty. My PC Tools has been clean the tray for me is not that nice. I tried a recovery tool, but the file has disappeared for a long time to recover. I have the game Unreal Tournament 3 abd she needed a server crash bu patch that he would charge not because of the missing dll file. I can't play my game and I'm going to cry, I.; m 57 years and don't have a lot of time left in the world so please help me soon.
Hello
There is a long list of things to try to solve this problem
you have to work your way through them
http://pcsupport.about.com/od/findbyerrormessage/a/wxmsw262u-DLL-not-found-missing-error.htm
Tags: Windows
Similar Questions
-
I did not any changes to my computer.
This "error" is displayed whenever the computer tries to update.
It says code XXX.
And I like many updates that says they don't have to settle.Hello
You must always specify the actual error codes.
Try this 1st to see if it helps, and it should:
Description of the Patch registration cleanup tool
http://support.Microsoft.com/kb/976220/------------------------------------------------------
If necessary :
Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)Those who will take you to a page where you can download the update.
Or go here and the KBxxxxxx number to download it.
Download Center - mount the KBxxxxxx.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en----------------------------------------------------
Then run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------------
Because these are all Office updates you might get more information if necessary in the Agency of those groups that
may have experienced the same problem.Office newsgroups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxMicrosoft.public.office.misc discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us------------------------------------------------------------
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
What can I do to get Adobe to download a pdf file that he transformed into a doc or docx? Any help is appreciated!
Hi ebbelby,
Try to use the web interface to pdf export: https://cloud.acrobat.com/exportpdf
Kind regards
Rahul
-
Adobe Bridge in CS6, the metadata model is wrong, and I don't know how to fix it
(Windows 7 64-bit) Adobe Bridge in CS6.
Until two weeks ago, I could open any of my picture files, and then click file, information file. Categories of metadata would be displayed, including the first category of page that has the copyright, author, description, keywords, etc..
Recently, the first category of the page is missing. I don't know how it happened, and I don't know how to fix this to return to the metadata with all categories.
It is not a question to edit new metadata, because the correct category is absent, there is no correct place to put the missing metadata.
I tried to create a new metadata template which has categories, but I can't understand how Adobe Bridge to use for picture files.
Any suggestions?
Click on the arrow down in the upper right to bring up the panels you want to display.
-
I get this error code and I don't know how to fix it please help!
Photo Gallery
I get this error code and I don't know how to fix it please help! Windows live Photo Gallery encountered an error loading WLXPhotolibarymain.dll error code: 0x800736b1
You will find support for WL photo library in this forum: http://windowslivehelp.com/forums.aspx?forumid=cafb0556-8959-49b9-afeb-635314aa02f3
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
I have a toshiba satellite T135D laptop and I don't know how to start my built in webcam which program should I use?
Hello George,.
I could not find this model number on the Toshiba site, so I suggest that you look at this page as a place to start your search: http://support.toshiba.com/drivers . They had a driver for a webcam, which is perhaps what you are missing. But in all cases, the Toshiba site is where you are most likely to solve the problem with the help of your webcam.
Let me know if this helps you.
Kind regards
BearPup
-
I have been designing a new Web site and when I publish on BusinessCatalyst the index page shows a sign 'coming soon '? This has never happened before and I don't know how to solve this problem?
I have published on an existing site, but also a new site, but I get the same message?
Hello
Open the page that wants to set as your home page,
Click on more action-> set as start page
Now visit the site again, it should be good.
Let me know if you have any question.
-
I use photoshop elements 12 on Macbook air and the screen freezes when I try to use the tools. Then I have to force quit if I lose my job. someone knows how to fix this?
What version of Mac OS X are you using? If the Yosemite, you will need to upgrade to 10.10.1 or higher version.
In any case, start by going in the editor preferences > general, click this button and the restart of the Editor:
-
I've been to see the BLUE SCREEN lately and I don't know how to fix it. I already checked the NVIDIA graphics card updates, but it's not! I also uninstalled and Reinstalled but I don't think that worked.
Signature of the problem
Problem event name: BlueScreen
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 1033Files helping to describe the problem (some files may be is no longer available)
Mini092911 - 02.dmp
SysData. XML
Version.txtSee a temporary copy of these files
WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.Additional information about the problem
BCCode: 116
BCP1: 9CEE7510
BCP2: CA 8, 16700
BCP3: 00000000
BCP4: 00000002
OS version: 6_0_6002
Service Pack: 2_0
Product: 768_1
Information about the server: ce621e4c-18c8-469e-8f97-42590f35c1d9AND:
Description
A problem with your video hardware caused Windows to stop working correctly.Signature of the problem
Problem event name: LiveKernelEvent
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 1033Files helping to describe the problem (some files may be is no longer available)
WD-20110929-1029 - 01.dmp
SysData. XML
Version.txtSee a temporary copy of these files
WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.Additional information about the problem
BCCode: 117
BCP1: 9CEE7510
BCP2: CA 8, 16700
BCP3: 00000000
BCP4: 00000000
OS version: 6_0_6002
Service Pack: 2_0
Product: 768_1
Information about the server: a59df662-85fc-45dd-a4b0-537bf6e212b3Hello
Check with support of the manufacturer of the system (motherboard for customized systems manufacturer) if the video device
is integrated on the motherboard. Also check with Nvidia Support, their drivers and documentation online
and ask in their forums known issues.NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
http://www.nvidia.com/download/index.aspx?lang=en-usNVIDIA Support - check with the support that she might be a known issue
http://www.nvidia.com/page/support.htmlNVIDIA forums - also check for the forums it might be a known issue or others likely to have
http://forums.nvidia.com/-------------------------------------------------------------
Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
Troubleshoot BlueScreens - answers top 3 (+ 1 more).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files.
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65------------------------------------------------------------
References to Vista also apply to Windows 7.
Have you updated your screen/video or other large recent drivers - check in Control Panel.
Updates of Windows to see if a driver has been loaded it. Use this generic utility below
and when you get to the section driver use the methods in the next message and then back to
the troubleshooter as needed. In rare cases, antivirus/antispyware/security programs can
cause this error.Also check with the support of system Maker and video/display of the map because he could be called
questions - also check in their forums.BCCode: 116 0 x 00000116
Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This indicates that an attempt
to reset the display driver and recover a time-out has failed.BCCode: 116 0 x 00000116<-- read="" this="" link="" read="" this="">
* 1275.html http://www.faultwire.com/solutions-fatal_error/attempt-to-Reset-the-Display-Driver-and-recover-from-0x00000116-----------------
BCCode: 117 0 x 00000117
Bug VIDEO_TDR_TIMEOUT_DETECTED control has a value of 0 x 00000117. This indicates that the display driver failed in a timely fashion.
BCCode: 117 0 x 00000117<-- read="" this="">
* 1276.html http://www.faultwire.com/solutions-fatal_error/the-Display-Driver-failed-to-Respond-in-timely-Fashion-0x00000117-1. update the video driver - also look for the BIOS and chipset of low level drivers at the manufacturer of system
of (card mother manufacturer custom systems). Check with Nvidia Support and forums.2 are looking for Virus/Malware.
3 check the hard disk for errors - run Checkdisk (see below)
--------------------------------------------------------------------------------
The inclusion of 116 error in the troubleshooting code is the only coincidence and holds no.
special meaning (other than pilot caused bluescreens occur with some frequency).Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard event viewer
Windows. TIP - Options - Advanced filter allows you to see a time rather
of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death '.
http://www.NirSoft.NET/utils/blue_screen_view.html
hangs and displays information about all accidents of a table - freeBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do without if needed fail or the Vista DVD or recovery command prompt mode
Options if your system was installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all the)
possible driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">
-
in the past I have installed the cd into my itunes to mp3, then I transferred to my sandisk mp3 player and now I don't remember how to do this again, please help, what I forget
Select Edit > Preferences > General (if necessary, press ctrl-B to activate the iTunes menu bar), click import settings..., then select MP3 encoder from the first drop-down and choose the setting of the quality required in the second dropdown. This then becomes the default format for imported CD media.
-
I have this message that appears constantly, and the only way to minimize it is to go to Task Manager. Here's what the message says... "this application has failed to start because AegisE5.dll was not found. Reinstalling the application may fix this problem. »
How to re-install the AegisE5.dll?
I have this message that appears constantly, and the only way to minimize it is to go to Task Manager. Here's what the message says... "this application has failed to start because AegisE5.dll was not found. Reinstalling the application may fix this problem. »
How to re-install the AegisE5.dll?
AegisE5.dll is linked to a network authentication system. Because it is almost certainly only used with enterprise networks, you should communicate with your company, IT supports for assistance.
If your computer does NOT connect to a corporate network:
- What changes have been made recently to your network hardware/software?
- You have a home network? Wired or wireless?
- How is your computer connected to the Internet?
-
When I plug in head phones work. and when he came out I had just hit my speakers really hard until she is back now he used no matter what I do.
Hello Christina,
Well tell what is obvious, you may well have damaged your material in a certain way - probably 'hit' a wide wire that has already been lost. It's a hardware problem; This site deals with software, for example, windows.
The kind of help that I could give would be if you have problems with your audio drivers, or if it is a virus or malware that was the cause. But shots on your speakers 'really hard' it makes it seem as if its associated hardware.
Assistance with the material, I suggest you two sites: Tom Hardware (http://www.tomshardware.com/); and Computing.Net (http://www.computing.net/).
Best I can do, sorry. Let me know how you fare.
Kind regards
BearPup
-
Message "not a copy authentic WinPro7' but it is and I don't know how to fix it.
I have a computer that is running a legal copy of Win 7 Pro and I installed a new hard drive and reinstalled the software. now, I get the message that it is illegal copy but that is not possible. How to fix?
It TURNS out that Microsoft has helped me and I am fixed. A fellow in India (who has been very helpful) could not help me, but put me through a young woman in Manila, and she was very helpful. My computer is now fixed and I'm happy that I don't have to lose all the programs and files that I had already entered on it. There were updates about 75 until this problem came as well. Don't have to go through all that again. Also thank you george1009.
-
I was hoping to try version track Lightroom which was unssecesful now expires, can I use the adobe program I have in my macbook, the serial key is required for all software please help me...
In an open forum, no one can help with a problem of serial number
You must contact Adobe personnel to help
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)Creative cloud support (all creative cloud customer service problems)
http://helpx.Adobe.com/x-productkb/global/service-CCM.htmlor
Serial number and activation support (non - CC)
-
I installed internet exploer optimized and and it is stll past offline during a session. also, I need to know how to get inside the Kindle so that I can tweek it works well. I'm just starting to learn to use this pc and vista
"my computer is always cut.
"and it's stll past offline during a session.Your question has 2 different phrases in it.
What is the problem!It comes with Vista, upgrade install and activate Forum.
http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/threads
Connect to the Internet safely, securely and efficiently.
http://social.answers.Microsoft.com/forums/en-us/vistanetworking/threads
To connect to a network, mail and the Internet.
Try to repost your question in one of the two Forums above.
At soon Mick Murphy - Microsoft partner
Maybe you are looking for
-
After the update to Vista, welcome screen is recycled to disconnect. Starts in Mode safe mode only.
After the last update, just slowed down, so I restarted my Dell Studio laptop. I noticed MsMpEng.exe was the biggest user of memory and still is. I lost the desktop configuration in mode without failure, as well as some sound themes, homepage, recent
-
U410 - cannot connect after Windows Update after restore factory when the time zone is not UTC-8.
Steps to reproduce the error: 1 use OneKey recovery to restore the initial factory settings. 2. on the initial setup of Windows screen, select a time zone to UTC - 8, UTC (London) 3. connect to Windows, open the Windows Update control panel and click
-
After the upgrade to Windows 7, I lost access to all components of the installation of HP programs. How can I get back them?
-
List reading assignments - reading not completed tasks
Hi @all, I try to read tasks in the BB todo list. with the following code, I can check the "completed": tasks if(match.countValues(ToDo.COMPLETED) > 0){ if (match.getBoolean(ToDo.COMPLETED,0) == true){ // processing of code here... } } But how can I
-
TIME BASED ACLS ON FIRESIGHT MANAGER
Dear all, We use the power of fire management center Cisco for VMWare. In which we have created several rules under strategies--> access control. But we want to run some rules under the defined time interval. Can anyone please help on this configurat