I have an iMac7, 1 with Intel Core 2 Duo 2.8 GHz, 2 GB memory, 500 GB storage, iOS10.6.8 and can update in 10.11.2. must I do cela or are there problems with the upgrade?
I have an iMac7, 1 with Intel Core 2 Duo 2.8 GHz, 2 GB memory, 500 GB storage, iOS10.6.8 and can update in 10.11.2. must I do cela or are there problems with the upgrade?
I don't know about other issues. There are always 'problems' with any upgrade. You weigh against the benefits. I know that you need more RAM. At least 4 GB, maybe more if you can. Don't forget that this system is produced at a time when most of the machines have + 8 GB RAM and when Apple said 'minimum' they really mean it. I recently inherited a MacBook that has 2 GB of RAM and the Mavericks. When I checked the memory, the use of the system was using 1.95 GB = nothing to run applications!
Tags: Mac OS & System Software
Similar Questions
-
Hello
I intend to pass our mailserver's current installation of Windows Server 2003 running on native hardware in a Windows Server 2008 running in a virtual machine on ESXi.
This is the same machine as we will reuse so I would prefer to be able to create the virtual machine on a different computer and test it before wiping Windows and install ESXi. Are there problems with the creation of the virtual machine in VMware Server and then migrate to ESXi using VMware Converter? I won't if the result is not a 'perfect' virtual machine that performs as well as if it had been created on ESXi from the beginning.
All our other VMs were created on ESXi from the beginning.
Kind regards
René Frej Nielsen
If you are not sure, you can load VMware Server 2 and then install ESXi in it and test your configuration. Do all this from your desktop (as it is decent). You can also do in my computer. A quick google search should give you all the information you need to get something like this configuration.
-
I'm migrating from ACS v4.2.1 to v5.3. I want the final v5.3 system to assume the IP address of the machine 4.2 of origin so I don't have to change any configs on network devices.
Are there problems with the change of the IP address of the system AFTER the initial installation v5.3?
I tried without problem. I changed the ip address of the WLC several times.
You must ensure that:
1-) you change the switchport accordingly to the appropriate vlan if the new ip address belongs to a subnet of a vlan different.
2-) make sure that all clients AAA configured to use the new IP address of the ACS servers.
Here is the procedure how to change the ip address of the interface (according to the doc of cisco):
I also changed parIP normal address and it works. but of course, the server must be autonomous before doing this step (i.e. no secondary ACSS registered to him and he is not on the other ACSS in a distributoin).
HTH
Amjad
-
Are there problems or restrictions with Xbox in the former CIS countries?
Are there problems or restrictions with Xbox in the former CIS countries?
Hello
Your Question is beyond the scope of this community...
I suggest that repost you in the Xbox Forums.
"Xbox a Preview program FAQ.
http://support.Xbox.com/en-us/Xbox-one/system/Xbox-update-preview-FAQ
'Home'
"Xbox forums.
http://forums.Xbox.com/xbox_forums/general_discussion/f/3817.aspx
_________________________________________________
"Xbox Forums directory.
http://www.Xbox.com/en-us/forums
General
Material & Discussion Services
Xbox support
Agent hours: M - F 09:00-17:00 PTLaw enforcement forums
Technical support of Xbox Live rewards
Xbox Live rewards Squad hours: M - F 09:00-17: 00 PSTSee you soon.
-
Are there problems with the copy a backup of one old drive to another?
After buying a hard drive TB Seagate external 3 to make backups, I conclude that, because of differences in sector I can not create a backup image to the new drive. I did an image backup on my Toshiba 1.5 TB and then copied the file to the new 3 TB drive. While it is a pain, for the moment, I don't see anything around him. Are there problems with it?
Another question: If there is a question, is there a way to write the image of the file on the drive that works and then all backups incremental file at CT 3?
Hello
Because you can't save the picture of the system directly on your 3 TB hard drive, you can save on your 1.5 TB hard drive, and then copy it to 3 TB external hard drive.
If you want to restore, you can restore directly from your hard drive 3 TB.
-
? What photoshop elements compatible with photoshop 11 14. Are there problems of transfer of catalogues PS 11 to 14. If I buy a new computer in the next 12 months can PS I transfer or install PS 14 on the new computer. CPH
chrisquanhallett wrote:
? What photoshop elements compatible with photoshop 11 14. Are there problems of transfer of catalogues PS 11 to 14. If I buy a new computer in the next 12 months can PS I transfer or install PS 14 on the new computer. CPH
Yes, don't worry if you migrate to the same operating system (Mac or Win).
Catalogue conversion works well.
If you plan to migrate to another computer, you need to transfer your image files as your catalogs, which means that you can use the backup and restore method:
Organizing moving items catalogue | Elements 6 or later version
When you use this method, the restore process recognizes if the database version is the same. If it is newer, it invites you to convert the catalog after the restoration.
To transfer the software elements itself, you will need to:
-Use the Help menu > disconnect deactivate your license from the old computer
-Reinstall the software
-use the same menu to sign with your product license key.
-
It didn't install the package when I download the Flash Installer. Are there problems with Adobe?
I don't know what you've downloaded; Try
-
Hi all
My friend recently bought an i7-720qm processor used to upgrade hp pavilion dv6 2 1 5 0 US and I
summer giving a helping hand by making the upgrade.
Since the 10 Windows running Google Chrome used up to 70% of the processing of an i3 - 330 m power
processor, it seemed to be good upgrade to improve the performance of the laptop.
We checked that the new i7 processor is compatible with the laptop (it is listed as supported by the)
( interview guide , page 108), and the seller assured us he tested the CPU on some different
HP pavilion and it worked fine.
But when I replaced the processor with the i7 processor i3 and tried to boot up the laptop, only the LED lights
on the front and the setting of the power and volume buttons would light up periodically. The screen was black
All the time.
Thinking I might have made a mistake during the reassembly of the laptop I put the original i3 processor back in
and it starts fine.
I updated the BIOS of the F.1C version I found on the internet and once replaced the i3 with the i7 with the
same results - display off, flashes periodically LEDs. The BIOS updated smoothly, and the correct version is displayed in the main menu of the BIOS.
I am confused on what could be the problem with the upgrade, everything should work. Is there a BIOS update I have
missed, or the problem elsewhere?
Disassembly and reassembly are made with care, and we took care to avoid static electricity. All the rest
on the laptop works well - I am writing this post on the laptop in question with the original i3 processor in place.
Any help, advice or general guidelines as to what should be done would be really appreciated.
Thank you for your attention.
Hello:
The problem is that if you look in Chapter 3 of the manual, pp 22-23, there are maps of separate used for the dual core and quad core processors system.
In other words, you cannot install a quad core processor in a Board that originally had a dual core processor and vice versa.
-
BlackBerry Smartphones BB8320 Internet problem with the upgrade to version 4.5
I installed the software for my bb8320 with wifi. Everything seemed to be going well with the upgrade. Now I try to use my wifi and connect to the wireless router is fine. When I try to connect to the internet, it gives me a problem. It said unable to connect to the internet...
I did have a problem with my wifi connection before the upgrade. My bb does not plan for the data.
If anyone has this problem and know how to solve this problem, please help me.
Thank you
You are trying to connect to one or more Web sites.
in the BB browser, enter in this
Mobile. BlackBerry.com
What is going on?
-
I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone. The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?
Probably there is debris and dust in the decision-making of the lightning. Serve with compressed gas canned (NEVER orally). If this doesn't help, try electronic contact cleaner has a q - Tip. Finally, take it to Apple.
-
Are there problems with Firefox 5.0 and 1Password 3.6.1?
I started to update to Firefox 5.0 and noticed a message that the 1Password version I had at the time would not work with Firefox 5.0.
Are there problems with Firefox 5.0 and 1Password 3.6.1?They say you need 1Password 3.6.0 or later to work with Firefox 5.0
http://Forum.agile.WS/index.php?/topic/5319-Firefox-5-requires-1Password-360-or-later/
http://help.agilebits.com/1Password3/firefox.html
-
Are there problems with OS 10.11.4 and opening?
Are there problems with OS 10.11.4 and opening?
Upside down images in the mode list. There is no hope of any problem opening fixing. There will be no further development.
-
I have an iMac 24 "Early 2008 OSX 10.8.5... 30.6 GHz processor Intel Core 2 Duo with 4 GB 800 MHz DDR2 SDRAM memory and 1 t HD. Can I upgrade the processor speed and if so what. Can I upgrade the memory and if so what. I launched iPhoto ' 08 7.14. Any input would be great. Thanks for your help and suggestions.
You can actually move the ram to 6 GB.
-
I have a MacBook Pro 17 withProcessor - in 2.33 GHz Intel Core 2 Duo (circa 2007). Running OS 10.7.5 (Lion). System indicates the computer is not compatible with OS later. Hardware can be upgraded to the latest processors and other components to make it compatible with the latest OS. I think that later models of Macbook Pro 17-inch with processors that allow updates. I was wondering if these can be swapped or if alternatives were available.
Only the RAM and storage (HD, SSD) can be changed. Everything is welded to the map logical and selected specially for the system configuration.
I'm sorry.
-
problem of installing active sync 6.1 64-bit with active sync. you have a known issue with the compatibility. you have a work around where the way to get these two together?
Maybe you are looking for
-
It's my information on my computer. Bought this mid 2012 some guys used MacBook Pro and it worked perfectly fine, and he said the battery was only 2 months old (he sent me the Bill for the apple store). I decided to upgrade the hard drive 5400 RPM fo
-
HP Proliant Server installation issues
Hello! I am trying to install Windows server 2008 R2 on HP Proliant Gen8 320e server but the configuration says it couldn't find my HARD drive so that, POST he passed as OK and him are still lit throughout the process. What could be the problem and f
-
LabVIEW 2013 executable only works on the development machine?
Hi all I created an executable to distribute my test software, but it only works on the development computer. With success, I gave my front executables with labview 2012 on the target computers by simply creating the .exe in the project and then Expl
-
MS win Server R2 2012 and Hyper-V issue licenses
My company has 60 employees (and 60 desktops / laptops) and currently have an old principle that server solution of Microsoft Basic with element a cloud as Office 365 for email only. We seek to reduce the estate of server to Server (2 CPU - Dell Powe
-
Hi all. Owner of a HP Elite 7100 mount I want to know, what memory RAM is supported on this computer. I bought Kingston 4 GB (two parts) kit DDR3 1333 MHz Non - ECC, CL9, 1.5V, LowProfile and when I installed on my PC and I started, have begun to sta