I have an internet connection, but when I try to enable Thunderbird software appears on my desktop screen, but could not complete the connection process.

I have Thunderbird installed on my desktop and laptop. So far, it worked very well on both machines. Today, when I try to activate the Thunderbird, the software on my desktop and laptops come on the screen, like the "sign-in" box When I try to connect, however, the process hangs part way through and the circle around the rotation shows that the activity occurs. Finally Windows 7 on the laptop tells me that the program is not responding.

The same result occurs on two machines, the desktop and the laptop. I checked and I have an active internet connection on both machines.

What should I do?

John Gardner

There is no right or wrong with using POP or IMAP. It really depends on what you're trying to reach. There is a lot of information on the web about POP or IMAP, here is an example.
http://www.howtogeek.com/99423/email-whats-the-difference-in-POP3-IMAP-and-Exchange
For more information on the transfer of data to a new profile, see this article. But I guess you have already covered everything you need.
http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Thunderbird

Tags: Thunderbird

Similar Questions

  • I have Photoshop CS6 extended. When I create a new layer, I get the following message. Could not complete the command because the selected area is empty. What I am doing wrong?

    I have Photoshop CS6 Extended. When I create a new layer, I get the following message. Could not complete the command because the selected area is empty.

    What I am doing wrong?

    Thanks for any help

    Bob.

    How do you create the new layer? Looks like you have a selection and use ctrl/cmd-J. If you have a choice and it is empty, you will get this error.

  • Had to reformat my hard drive, now when I try to reinstall Windows XP I get a blue screen with this code at the end 0x0000007b.

    has had to reformat my hard drive now when he star0x0000007b (0x78d663c, 0xc0000034, 0x00000000, 0x00000000)

    has had to reformat my hard drive, now when I try to reinstall windows xp, I get a blue screen with this code at the end 0x0000007b (0x78d663c, 0xc0000034, 0x00000000, 0x00000000) how to solve this problem

    Hello

    I saw the 0x0000007B BSOD caused by trying to install XP on a disk hard while the BIOS is designating the reader as AHCI instead of IDE. XP has no native AHCI drivers, resulting in a stop 7B. Unless the PC had originally Vista or Win 7, but it might be useful to check that it is not likely.

    If the BIOS is set to AHCI, you could do one of three things (depending on whether your PC has a floppy drive)...

    1 find the Setup F6 disk on AHCI support at installation time (start with the manufacturer's website if you do not already have such a thing). Watch the very hit F6 prompt early in the installation process.

    2. change the setting in BIOS on IDE / ATA

    3. create a new "slipstreaming" installation disc drivers AHCI in the existing installation disc, see http://www.nliteos.com/index.html

    After the back if your BIOS is IDE / ATA

    Tricky

  • I can hear a wav file, but could not get the video from my camera.

    original title: file WAV on Vista

    I can hear a wav file, but could not get the video from my camera.

    I have windows vista?

    Hello
    WAV files will be audio only.
    You can save this file as an MP4.
    B Eddie

  • HP 4620: HP 4620 scans very well, but could not save the analysis in a file

    The scanner scans very well, but could not save the analysis in a file. Whenever I try to save, it crashes.

    Hey @motikama,

    Welcome to the Forums of HP Support!

    I see that you encounter some problems with the scanning of your Officejet 4620 e-all-in-one for your Windows 7 PC. I can help you with that.

    To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

    1. Uninstall all software associated with the printer to your computer.
    2. Restart your PC.
    3. Download and install the latest drivers by clicking on this link.

    Please let me know the results after following the above. If you can scan, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  • I tried to record some live audio. I downloaded Wondershare Streaming Audio Recorder I opened the program - but could not hear the audio I tried to play.

    original title: sound problems

    Hello!

    I tried to record some live audio. I downloaded

    Wondershare Streaming Audio Recorder

    I opened the program - but could not hear the audio that I tried to play. I don't know if downloading this program is related to the problem.
    I opened Skype - and everything worked fine. I could hear, etc. But if I run an MP3 in Windows Media Player - I hear nothing!
    My sound is at the top.
    In my Volume mixer, I see:
    1 output device digital (SPDIF) bounce up and down. (but I don't)
    2 but applications: sounds of Windows, Windows Media Player and Google Chrome will not move. (but they are at the top).
    Any suggestions?
    Jews

    I managed to get the results of work. I don't know where come the SPDIF.

    I downloaded a new driver Realtek for audio from the computer. This corrects the problem.
    But I still want to know what happened.
  • I have a mac and I got this massage after I tried to save my cc photoshop photoshop system could not complete your request because the file was not found.

    I have a mac and I got this massage after I tried to save my cc photoshop photoshop system could not complete your request because the file is not found, can someone help me? Thank you

    I installed the 9 raw and everything is back to normal thanks for your email about /peyman

    Skickat fran min Samsung-enhet

  • I installed photoshop CC2015 on eight computers. Whenever we open the file tif 582 MB, came error "could not complete the command because thre is not enough memory. However, we have 32 g meory and with 3.6 ghz cpu

    I installed photoshop CC2015 on eight computers. Whenever we open the file tif 582 MB, came error "could not complete the command because thre is not enough memory. However, we have 32 g of meory and with 3.6 ghz cpu can someone, please give some me help on this issue?

    How much memory you allocate to Photoshop in the preferences?

    Terri

  • I'm trying to install Adobe Acrobat 9 Pro (mac). I have my serial number, but could not find a download.

    Is there anywhere I can find a download for Adobe Acrobat 9 Pro for Mac?  I have the serial number, but could not find a download.

    Hello

    Please find the link below to download:

    Download Acrobat products | 9, 8

  • Replace a hard drive in dv6 but is not completed the installation phase

    I replaced my hard drive with a disks recommended by an expert from HP in this forum, and he seemed fine. After starting with my #1 recovery and loading of each disk when you are prompted, I got the final guest/message: "preparation of the recovery is complete. Remove the system recovery media. Once the computer is restarted, the installation of recovery process will begin... Support on continue restart the computer. "When I hit the"Continue"button, the screen went black as if it has been restarted. But instead, a black screen with the HP logo in the centre appeared, with the text: "Press ESC for Boot Menu" in white letters in the lower left corner. Waited about half an hour, and then you press the ESC key, but it changed nothing. Same screen HP. And that's all - nothing else has happened. I left it on all night, thinking perhaps that it takes time to get there, but in the morning, the same screen was there and my phone was hot as if in use. So I turned it off right there. What would not, and that I should try now?

    Turns out that I don't need to download the Microsoft Windows software and then struggle to find the right drivers, thank God. My recovery discs works perfectly after all.

    Having read tons and tons of forum posts about this problem, I finally found a solution that worked really - posted by another user, GoodTimes81 (thanks!). This solution is pasted below (with numbers and an additional note added by me):

    (1) put the recovery disk #1 in and

    (2) when the Recovery Manager screen loads, you will get a few options, but the one you want is the command prompt (which appears after you select "Run a computer check.")

    (3) in the command prompt, I typed bootrec.exe/fixmbr, you press on enter and waited it says the operation completed successfully.

    (4) I typed bootrec/fixboot and then you press on enter and again waited until he said the operation has completed successfully.

    (5) after having done that I left the command line, restarted my computer and waited until my recovery disk #1 loaded up again.

    (6) then, I chose the recovery system to the Recovery Manager screen and went through the process of insertion of disks 1 to 4.  When the 4th disc is complete, it says remove the recovery disc and press on continue, which I did, then it restarts, except that this time it restarted and actually started the installation and facilities it is supposed to do and has completed the recovery process.
    _________

    The other user said these steps solved the problem for her, and they could work for you. Finally, they worked for me, except after step 5, the recovery disk #1 would not load again. I received an error message (the black screen, white letters) mentioning a problem of location startup (sorry, that I did not write down exactly what he says). I pressed the button power to restart, but got the same error message.

    So I pressed the button to power again but this time, you press F11 repeatedly until I had a menu of options. The option to boot was F9, then I pressed F9 and selected "CD/DVD player" (which I had already done elsewhere earlier in the process, but maybe it had reset after entering the command request?) and then restarted again.

    This time, it worked, and I was back in step 6 above. Load the discs one at a time (note: I have 7 discs instead of the 4 mentioned by another user), and after that the disc was done and I got the prompt to "Press continued to restart", it restarted and he proceeded to load all the software, drivers, etc as it is supposed to. Yay!

  • WRTP54G router: I have wireless internet access, but is not a wired desktop computer.

    We have a great wireless network in the home, but my office (which is not wireless) is unable to access the internet.  It is said that a network cable is unplugged - it isn't.  When a cable is plugged into one of the 4 ports on the back of the router ethernet, ethernet LEDs located on the front doesn't light up or blink or anything.  I think that the part does not work.  Is there something I can do?  Should I update the firmware?  Or just get a new router?  I tried different cables, but nothing changes.  The only way for the office get online is to take the router configuration, but then the wireless network and the Vonage phone came out.

    I went to ipconfig at the prompt of commands and under the Ethernet connection to the Local network card: my media is media disconnected.  So, I'm guessing that the router's ethernet ports do not work.

    Thanks for your help.

    Make the continuos ping ping 192.168.1.1 t and check how many answers or RTO you will. If you still have some of the answers, connect your PC to the modem to get internet connection and download the latest firmware and utility upgrade for your router.

    FIRMWARE

    1. go to www.linksys.com/downloads

    2. Enter the model number of your router

    3. choose Get downloads

    4. Select the Version of the device

    5. check drivers and downloads, can download the Firmware

    UPGRADE UTILITY

    1. go to www.linksys.com/downloads

    2. Enter the model is BEFSR41

    3. choose Get downloads

    4. Select the Version of the device - Version 4.0

    5. check drivers and downloads, can download the utility

    After downloading these files.

    Connect your PC to the router, and then run the TFTP (Utlity) set Server = 192.168.1.1; Password = admin; then choose the firmware file that you downloaded. Then upgrade the firmware of your router.

    Note: Make sure that you set TCP/IP and DNS server you computer back to GET the IP ADDRESS.

    Note: To run the utility TFTP set TCP/IP and DNS server on your computer to USE THE FOLLOWING IP ADDREESS.

    Just follow the previous posts to do this. Good luck.

  • I have a serial number for cs3, but could not find the disk...

    I have the serial number, but can't find my disc. That's the master collection. I am trying to download the software from this site so that I can put my serial number (I'm on a new computer), and it keeps giving me an error when I try to download the first file. Can anyone help?

    You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

    Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

    CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

  • Error: "Windows could not complete the format" when you try to write to blank DVDs

    I get this error when you try to copy files to a blank DVD.  I am trying to drag and drop files into the dvd player and after a small roar, the dvd ram drive stops and the error message.  Then the drive no longer recognizes blank dvd inside.  I am running Vista 32 bit and my dvd ram is a matshita dvd - ram uj880as ata.  I tried to switch to the microsoft 'FixIt' site, but the problem is not resolved.  I think that the report mentioned that the reader could recognize not writable or something to that extent.  The player can play DVDs fine, however.  Is there a solution to this problem by replacing the dvd ram drive?

    Hello

    Have you tried to close all programs and then insert the disc to see what is happening? Try a slower
    speed or mastered format. Have you added any burning new software lately - these tend to compete
    for resources and can interfere with each other.

    Should which CD or DVD format I use?
    http://Windows.Microsoft.com/en-us/Windows-Vista/which-CD-or-DVD-format-should-I-use

    ====================================

    You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
    Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

    Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

    CD have a tolerance + - and you can write on the outside edge.

    Several good info here:
    http://Club.myce.com/

    Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
    http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

    -----------------------------------------------------------------------

    Try this troubleshooting:

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack. Even if the reader does not appear to continue below.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
    slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Hope these helps.
    Rob - bicycle - Mark Twain said it is good.

  • A friend added to the discussion group, but could not find the cat on his Skype

    Hey my friend had some difficulty in finding a focus group that it has been added to. It has certainly been added, and we tried a lot. We have updated the Skype. Re-uploaded and more. Nothing worked, the cat is nowhere to be found. I've been in this chat and it had approximately 20 members and I could see his name in the members box, but he could not find his Skype chat.

    NVM,

    Benopro wrote:

    Hey my friend had some difficulty in finding a focus group that it has been added to. It has certainly been added, and we tried a lot. We have updated the Skype. Re-uploaded and more. Nothing worked, the cat is nowhere to be found. I've been in this chat and it had approximately 20 members and I could see his name in the members box, but he could not find his Skype chat.

    NVM, it fixed

  • When I try to get into google I get a certificate error and do not trust the site

    When I try to enter in google site I get a certificate error and a message not to trust site and put / add www in the address bar, but it does not work either thank you for anyone who can help

    Please start with the basics:

    http://www.elephantboycomputers.com/page2.html#Removing_Malware

    Report with the results if you need assistance. MS - MVP - Elephant Boy computers - don't panic!

Maybe you are looking for