I have aspire computer desktop M3920 and all my USB ports at the front do not work any more :(HELP

Similar Questions

• all of a sudden... my computer does not see the things I plug into the usb ports on the front of the computer...?

  all of a sudden... my computer does not see the things I plug into the usb ports on the front of the computer...?

  If I shut down the computer and plug... he sees the thing then turned back...
  I can not just plug in while the computer is turned on... once again he has used to do this just as well... for some reason any, he sees things now.
  any thoughts?

  Hi KK Waddell.

  Thanks for posting in the Microsoft Community.

  I understand that you face the issue with the USB port does not work when you embedded on the front of the computer.

  Before you start the troubleshooting steps, I need the information required.

  1 did you changes to the computer?

  2 did you receive an error message?

  I suggest you to check with the other USB port.

  I suggest you to see the links and check.

  USB port may stop working after you remove or insert a USB device

  http://support.Microsoft.com/kb/817900

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  One or more USB devices may not work when you start your Windows XP-based computer

  http://support.Microsoft.com/?kbid=885624

  See also:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

• I am running windows xp on a computer dell laptop and just bought an acer H213H-screen that does not work. __

  I am running windows xp on a computer dell laptop and just bought an acer H213H-screen that does not work.

  I downloaded the driver appropriate on the acer site and installed.  Also, I tried to reduce my resolution.  None of them have worked.  I get a message on the acer monitor that says "Input not supported"

  You check the display settings and make sure that you do not have your resolution to high for this monitor. Its got to many many times.
  Please rate me upward if you find my post helpful. Thank you!

• I have Win7/64. But I don't know, how I have my USB webcam to work. The cameras settle the program will not work. Please help me!

  I have Win7/64. But I don't know, how I have my USB webcam to work. The cameras settle the program will not work. Please help me!

  Thank you more:
  Steve Vidacs /Hungary

  On Monday, November 5, 2012 20:14:15 + 0000, istvanvidacs wrote:

  I have Win7/64. But I don't know, how I have my USB webcam to work. The cameras settle the program will not work. Please help me!

  You must have installed a Windows 7 64-bit driver (if it exists)
  for this. Do you have? Otherwise, navigate to the web site of the camera
  manufacturer, search, download and install it.

  Ken Blake, Microsoft MVP

• All of a sudden my button mute does not work any ideas?

  All of a sudden, the mute button on the left side of the phone does not work. You can click the button back-and-forth, but you do not see the Bell showing that the phone is cut or not muted. As far as I know that I can no longer cut the phone.

  You can check that the mute works even if the icon is not displayed?

  cold you have restarted the phone yet?

• I have a hp m175nw printer. email prints from my iphone, but the image does not work

  M175nw printer. email prints from my iphone, but the image does not work

  If the DPI (dots per inch) is less than 100, the printer will not print the photo because it would be too low in quality. Draw the image on the computer, then right-click on it and click Properties, check the horizontal and vertical dpi and see if these figures are less than 100. Have you tried to connect the iPhone to the same network as the printer and try to AirPrint peak? AirPrint road doesn't have the same requirements on IPR as the ePrint.

• V11.0.12 XI and IE11 Acrobat. Hyperlink inside the PDF does not work when the PDF file is opened with any browser.

  V11.0.12 XI and IE11 Acrobat. Hyperlink inside PDF is a blue rectangle and links to another PDF. When PDF is opened in Acrobat, the link works. When opened in any browser (IE, Firefox, Chrome) the link does not work. How can I get the link to work in browsers?

  I think it is a bug. I uninstalled Acrobat and reinstalled Acrobat v11.0.0. I tried the link and it works properly. Then, I installed each both updated and tested the hyperlink. Update 1-10, that the link works. However, when the 11.0.11 update is installed, the "Go to a page in another document" hyperlink stops working in browsers. V11.0.12 installation does not solve the problem. If I uninstall Acrobat and install v11.0.0 with updated v11.0.10, everything works fine.

• USB problems: When HP Photosmart C4599 is enabled, all other USB ports on the desktop becomes useless

  I just bought a HP Photosmart C4599 and successfully installed the software provided on my HP Pavilion 743c Desktop.  I connected via a USB cable.  I am running Windows XP SP3 and automatic updates are on.  I've updated the software that came with the printer and everything seems to work properly.  I printed and scanned successfully.   However, I noticed that when I connect my memory stick or digital camera via USB, I now get this message annoying that States, peripheral USB not recognized.  The only way to get my computer to recognize my stick of memory or the camera, is to stop my printer and then reconnect my stick of memory or the camera.

  Somehow the printer or the software's a waste opportunity to my computer to recogize the devices that are connected via the USB port.

  I wish I could connect my memory stick or the camera without turning off my first impression.

  Any solution would be really appreciated.

  This usually occurs on computers with older chipsets USB which cannot provide enough power to multiple devices at the same time. The best you can do is try and install the latest drivers for your motherboard or update the BIOS of your motherboard. Otherwise, use only 1 USB device at the same time. Or, buy a powered USB hub and connect the printer or get a new computer.

  In addition, you do something else. Unplug all USB devices from your PC (except the keyboard and mouse). Now just turn off your computer and unplug the power cable from the Tower of the wall outlet. Be it like that for about 20-30 minutes. Now just press the power button on the tower for about 3 to 4 times to ensure that all static electricity is passed, then plug the cable into the wall and turn on the PC and try the two devices to connect to the PC and see if you get the error messages.

  In addition, you can insert the memory stick into the memory card slots printers and view pictures on your computer.

• USB ports on the front of the HP Pavilion s5704y desktop computer

  I have two ports usb in front of my computer, & I have an external hard drive plugged into the upper slot & had my camera cord in the bottom one. My dog bumped the bottom one & broke a small black piece of plastic on the bottom one. If I unplug the top now my computer dies. How can I replace the usb ports? I am computer stupid hope if you can understand what I'm talking about. Thank you!

  Hello

  The damage is most likely more cosmetics.

  Damage to the front of the USB 2.0 connector or wiring has probably occurred. A short wiring/USB connection could be fed to the bottom of your PC. Not a good thing for the health of your system. More damage can occur if left.

  Have a reputable local PC tech take a look or contact HP support for service.

  A quick fix to avoid any further damage would be to shut the system down, open the box and wire USB front header on the motherboard. Then disconnect the wire to the USB header.

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo, Thumbs Up" If the notice is relevant or "accept as Solution" to help other users of the forum having a similar problem.

• do I have wacom tablet or other brand draw on my pc? the mouse does not work.

  been trying to use the paint on my computer Windows vista, Home Premium edition, but as you know drawings do not well: irregular line, colors overshot, etc., honestly speaking, I need to get the sometype of wacom tablet or other brands that blow my mind early, you could send thoughts on this subject to me, evil go to "The Art Institute this Summer" I want to just be prepared. Thanks for help past and keep strong!  PFC Brian Noble, U.S.Army veteran

  Hello

  ·          What is the problem with the mouse?

  ·          What is the mouse works on another application?

  ·          What is the number and model of the mouse?

  ·          When did it stop working?

  To understand more about paint used in Windows Vista, you can consult the following link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-paint

• I have adobe acrobat 6.0 and windows 7.0 Professional... they do not work together

  Is there anything I can do to make these work together?

  Hello

  As Acrobat 6 is a pretty old version, and it probably won't work with windows 7.

  There is no possible way to make them work together. Either, you need to update your version of Acrobat that is compatible with windows 7 or downgrade your operating system if you want to stick to Acrobat.

  However I recommend to spend in the last DC Acrobat, which is the latest version Adobe has launched and is compatible with the operating system you are using.

  In addition, it is loaded with new features that will simplify your work and make it practical.

  Here are the links to download Acrobat DC.

  If you want the subscription see this - download Acrobat DC (continuous). Company or VIP

  And if you want the perpetual version -download Acrobat products | Standard, Pro | DC, XI, X

  Concerning

  Sukrit diallo

• All my USB ports are disabled; keyboard and mouse do not work, can not navigate to reactivate their?

  After installing Java rebooted my system update, while booting it showed Eroor message 'BootMGR' missing, disabled bymistake USB ports, now my keyboard & mouse not working does not help?

  Hi Abhi SR,

  ·        How do you disabled the USB ports?

  ·        What you did to fix the "BootMGR" error missing?

  If you have disabled the USB ports in the BIOS (Basic Input Output System), you will need to use a PS2 Keyboard and enter the BIOS for their re help.

  Note: Changing the BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I made the mistake of disabling all my USB ports in Device Manager! Keyboard & mouse do not work. I need to restore the Sys - HELP!

  I made the mistake to disable all my USB ports in the device (Windows XP Home Edition) my mouse Manager and the keyboard works not because they are connected through USB ports. I need to find a way to get to the system restore through the Mode without failure or normal startup. Can someone please help!

  Hi PaulCanik,

  • Do you use your laptop or desktop computer?

  Check if keyboard works in basic input/output system (BIOS), if it works, then you will need to enable USB port from there.

  You will need to contact the manufacturer of the computer to aid in the basic input/output system (BIOS).

  If this does not help then you need to connect PS\2 mouse and activate later all USB ports on the computer.

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• I download my e-mails from gmail to my computer using firefox and only downloads of firefox 3 at a time, not all of them, I. Takes forever.

  I download my e-mails from gmail to my computer using firefox and only downloads of firefox 3 at a time, not all of them, I. Takes forever.

  Sorry, I should have to say that I use Firefox Thunderbird. To automatically download my emails to gmail, but it downloads only 2 or 3 when I did about 50 per day. I have to click again and again. It is on a desktop computer, laptop computer, in fact. My office works very well. Thanks for any help.

• Hi, I have installed sqldeveloper - 4.0.3.16.84 - x 64 with JDK and tried to run SQLDeveloper.exe its does not work. A flash comes and goes. It worked fine until two days ago. Don't know what happened all of a sudden its not working. Need help.

  Hi, I have installed sqldeveloper - 4.0.3.16.84 - x 64 with JDK and tried to run SQLDeveloper.exe its does not work. A flash comes and goes. It worked fine until two days ago. Don't know what happened all of a sudden its not working. Need help.

  I use Windows 7 Pro.

  I have read other threads and tried to launch SQLDeveloper.exe from the CMD prompt, nothing is shown a flash comes and goes.

  Tried to change of SetJavaHome sqldeveloper.conf to the path JDK that it didn't work.

  Please guide me.

  Thank you

  Maybe there is a problem with SQL Developer, being able to write to the network share of desktop directory.  Add the following to your sqldeveloper.conf file to force the settings of the user to store locally also:

  AddVMOption - Dide.user.dir = some_local_dir_to_own_system4.0.3.16.84

  I hope this helps...