I have built into the camera on the computer acer laptop how to fire an image & save it?
How to take a photo & where are they saving?
How to take a photo & where are they saving?
You must install the required application that came with the webcam, if you don't have that, download and install from the manufacturer's website.
Once done, open webcam application, you will find "capture photo" option, click it to capture, by default it saves the image in pictures.
Tags: Windows
Similar Questions
-
Want to buy the computer acer laptop
Does anyone have suggestions on buying a cheap Acer laptop with or without optical drive
I bought an Acer Aspire R7 R7 571/R7-572 in 2013, I have no regrets. It's a portable tablet convertible and I particularly like this feature. Not so much because it's an Acer, but because I can fold the monitor flat on top of the keyboard or just pull it forward and adjust it to my line of vision or to stop a glow of a lamp. This Acer has a very fast start up. I put 10 W on it when it is released. I also ordered the stick of reformatting, but it is very expensive compared to other manufacturers. Be able to reformat saved a lot of money since 1996.
-
Windows 7 64 bit to 32 bit
I have windows7 64-bit with the computer acer laptop, but I want to change to 32 bit can it is possible with the same product key?
If you have a retail version of Windows 7, then it is more than likely came with discs both 64-bit and 32-bit. In this case, boot from the 32-bit disk and do a clean install.
If the 64-bit version has been pre-installed, then you need to contact Acer to see if they have a 32-bit recovery disc.
-
From time to time, (isn't that every now and then, not every day or every week) a message appears on the computer screen to notify that "a storage device has been attached... and something or other on a port '-as it would if a new hardware device had just been installed or removed... only, I have not attached at a storage device.
In fact, apart from the scanner, printer and keyboard connected, which are already inserted until the computer is turned on, no USB storage device or any other thing seized or inserted into the computer when this message is displayed on the lower right screen where the icons on the desktop are,
Why would this happen unless I had personally inserted/joint a USB stick storage device myself in my computer?
I'm afraid that maybe someone to access details and store information from a remote location via a storage device? Is this possible?
And if it's an error of some sort, how to fix this problem?
Please notify. Thank you.
This probably means you have a bad USB connection somewhere. I got this a lot when I used markets good USB hubs. It also happened a lot on a couple of the USB plugs on my old laptop 4 year, where I had plugged in and out things in them so that the connectors are not as strong as they were when new. My main office more connected devices above that outputs 4 USB, that I had on the back, so I finally bought a card extension to add 4 more exits USB. If this is your case, perhaps you could do the same. Expansion cards are not very expensive, usually in the range of $ 15 to $ 25, and they are fairly simple to install.
I hope this helps. Good luck.
-
Hello 11/18/2015 I bought Illustrator photo and ask the Adobe site plan for individuals with credit cards, but to date I have not received the confirmation email. How can I contact for more information on the good end of the order?
Your subscription to cloud shows correctly on your account page?
If you have more than one email, you will be sure that you use the right Adobe ID?
https://www.adobe.com/account.html for subscriptions on your page from Adobe
.
If Yes
Some general information for a subscription of cloud
Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work
Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud
-Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
-ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
-http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
.
If no
This is an open forum, Adobe support... you need Adobe personnel to help
Adobe contact information - http://helpx.adobe.com/contact.html
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">===>
-Select your product and what you need help with
-Click on the blue box "still need help? Contact us. "
-
My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.
Sync your iPhone, iPad or iPod touch with iTunes using a WiFi - Apple...
-
When the cd is put into the computer, drive works but nothing appears in the desktop and nothing happens when I insert the USB into usb port. (Can access both by going to 'my computer'.
Hello VinceBurkis, this thread has been created in the forum Desktop and personalization; the moderation of Microsoft team has moved this thread to the hardware and drivers Forum.
-
Hi, when I click on Windows Update it says that he cannot work and maybe I have to restart the computer. But when I do it always appears with the same. In services, it is configured to automatically update windows and is started. Can anyone help?
Hello
Method 1:
You can run the fixit. Check out the following link.
The problem with Microsoft Windows Update is not working
http://support.Microsoft.com/mats/windows_update/Method 2:
You can run the fix provided in the link and check out them.
Resolve security issues to protect and secure Windows automatically
http://support.Microsoft.com/mats/windows_security_diagnostic/Method 3:
You can read the following article.
Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
http://support.Microsoft.com/kb/2509997
Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Note: if bad sectors are found by running the check disk utility and if the attempt to recover bad sectors is verified when checking the disk for errors, data in the bad sector might be lost in the attempt to recover bad sectors.Method 4:
I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Important: when running Scan disk hard if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data may be lost.See also:
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
Updates: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questionsIt will be useful. -
Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect.
I hope someone can help on Win 7 64 bit, music is taken on a disk usb2 external hard... I had no problem until today when the message in the title appeared next to each track, with a little red cross.
I already deleted database library as suggested by some of the forums, also disabled the media as a feature of Win 7, rebooted and then re-enabled it. I also disconnected externally and restarted that as well, I'm also the same mistake with a cd in the cd drive as well.
Can anyone help?
Hello
This error may occur for one of the following reasons:
The file is currently in use. Close the file and then try again.You are not allowed to access the location where the file is stored.
Follow these steps to grant all permissions in the folder where the files are stored:
1. right click on the folder on the external drive and click Properties.
2. in the Properties window, click on Security tab.
3. now, click Edit , and then click Add.
4. now, type everyone in the box and click OK.
5. check the full control box.
6. click on apply and then click OK.You can also try the mentioned below as follows:
1. click on start.
2. go in Control Panel.
3. Select "SOUND".
4. double-click on speakers.
5. click on the tab advanced and then uncheck the enable audio enhancements.Kind regards
Amal-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Original title: problems of residential group after system recovery
I started a homegroup on my computer. I added another computer to the homegroup. Everything worked fine until I had to perform a system recovery on the laptop that I used to start the homegroup. I implemented the homegroup again, but I can't access the files on the other computer via Windows Media Player. I get an error message that says "Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. "I can access all the music files via Windows Explorer. I have to start over with a new password? Can I just create a new homegroup? What other options do I have? You can provide any help would be greatly appreciated. Thank you.
Hello
Please follow the methods and check the issue:
Method 1:
Open the homegroup troubleshooting utility:
http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter
Method 2:
Why can't I access my homegroup? :
http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-access-my-HomeGroup
For reference:
Homegroup: frequently asked questions:
http://Windows.Microsoft.com/is-is/Windows7/HomeGroup-frequently-asked-questions
Method 3:
See the steps in "include a folder shared in a library" from the link below:
Access to files and printers on other homegroup computers: http://Windows.Microsoft.com/is-is/Windows7/access-files-and-printers-on-other-HomeGroup-computers
I hope this helps.
-
When my monitor goes to sleep I can't wake him up by clicking on the mouse. I have to restart the computer to be able to see the screen. I tried all turned on and on the screen but when I do it says monitor going to sleep
I assume you are using a desktop computer you are referring to the monitor going to sleep rather than the course of PC to sleep.
1 check the monitor power management & the display adapter in Control Panel, Manager of peripheral and during that control you the mouse power management and make sure that it is likely to be used for anything wake up.
2 in case of failure, then check the monitor & display settings of the adapter to control panel, display.
3 check manual site or the monitor stand, so the settings recommended.
4 then check the settings of the Control Panel, power options, change plan settings change advanced power settings. In particular, if it is a USB mouse, you may disable settings settings USB, USB selective suspend setting.
-
When you try to download an audio conference on Windows Media Player class, the following notification: Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. I was able to download in the past but now cannot. Any suggestions?
In WMP, find the tab "Tools", "upper task bar", Search tab options when pressed.
In the new properties window, change the tabs, connections would determine internet
speed adjustment... Change all.
-
I currently have Adobe Pro XI, but I get a new laptop, how to install the software on the new laptop computer
Hi Victor,
If you are referring to Acrobat Pro XI, you can download and install from here: Download Adobe Acrobat products. Standard, Pro | DC, XI, X
Kind regards
Rahul
-
HP Mini 110-3130NR and the new hard drive - how to create an image and use it?
I want to replace the current hard drive to my HP Mini 110-3130NR of a new SSD.
Ideally, I'd like to copy the disc hard integer on the SSD and then just swap hard disks (create a picture of the current hard drive work in the SSD).
Otherwise, I have an external USB hard drive, so I could save the contents of the original hard drive and restore the image in the SSD. The problem is that HP Mini doesn't have a DVD player/burner, and I fear that it does not start via a USB device.
Any help is welcome. Thank you.
Respect!
OK, all these programs did not help ast all, they still have some problems with SSDS (I tried an Intel X 25-M SSDSA2MH080G2K5 and an OCZ Vertex 2 OCZSSD2-2VTXE120G).
This is so the fix for the problem, all you need a 4 GB flash drive.
In Windows XP, Vista or seven plug the flash drive into the computer, open a command window (type cmd in the search) and type:
DiskPart
In the window that opened type:
list disk
Find the number corresponding to your USB key and type the following commands, replacing X with the number corresponding to your flash drive:
Select disk X
clean
create the primary partition
Select partition 1
assets
format fs = NTFS
Assign
outputThen insert a DVD Windows Seven of INTAL, open the command prompt and navigate to the "Startup" folder in the Windows 7 DVD.
Starting inside this folder, run the command:Bootsect/nt60 W: - replacing the W with the letter assigned to your flash drive.
After that, simply copy the entire contents of the Windows 7 Installation DVD to flash drive, drive to the computer with the newly installed SSD and start from the flahs player.
Enjoy!
Someone click on the bottom "accept as a Solution.
Respect!
-
I recently gave a computer acer laptop and you want to change the property
I recently had a computer acer laptop and the old name of the owner is always on it, how do I change it without losing anything please?
If I had been given or bought a second system of the user, the first thing I would do is a destructive restore as long as the plant, that way you have a clean box system
Maybe you are looking for
-
Citrix receiver does not work on ver 30.0.
Receiver Citrix (ICA client) does not work on ver 30.0. Request do not start when you click citrix links in the website of the company. Worked fine until worm 29.1. Changed the version back to worm 29.1 works fine now.
-
I just downloaded Firefox as my browser and I can not find my favorites on my home page icon
I just downloaded Firefox as my browser and I can not find my favorites on my home page icon
-
All of the photos used in the Pavilion projects
I'm looking to free up space on my hard drive to the Mac. I have created a backup of the library of Photos on an external hard drive. I did a year, to keep things manageable. Go ahead but I like to keep a few photos of each year in a library consoli
-
Setup cannot copy the file hpinkins5412.exe
Setup cannot copy the file hpinkins5412.exe Using full features software and pilot OJ6500_E710n - z_334.4 When I use this version: full feature software and driver OJ6500_E710n-z_1315 All software installs normally. I get all the correct screens. I
-
Constants of output for the case of Structures
Hello I have a pretty basic question about the case structures in labview. As indicated in the attachment below, using the structure case I've pretty much tried to create a three position switch. I'm trying out a value for the first (in the range and