I have Firefox 31 and new private window does not?

Similar Questions

• New private window does not open

  I've updated my browser Firefox yesterday. Not problems after that. Close my laptop. Rebooted the laptop today. Firefox has started which opened after a long delay. "Clicks on the icon to open ' new private window. He has not opened even after several attempts. Restarted my laptop. Same problem persists. I use Windows Vista SP2 on my laptop Dell Inspiron. Please suggest a solution.

  Refresh Firefox – reset settings and Add-ons can help you with any problem of Firefox

• New private window does not work.

  Since the update to version 26 I can't get the new window private work. I'm going to present, to open new private window and everything that happens is another opens a standard window. I am running Windows 7 64 bit.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• How to print a selection of an image in photoshop CC, I have problems because in the print window does not display the full image and the printed only a section of what I SELECTED

  How to print a selection of an image in photoshop CC, I have problems because in the print window does not display the full image and the printed only a section of what I SELECTED

  Hi jodepepevalentin,

  In the print menu, check "scale to fit media" under the Position and size of the device and then check out.

  If you want the area selected for printing, check "Print selected area" under the Position and size and specify the size.

  Kind regards

  Claes

• I have nikon d7200 and I the beidge does not open in the first. I'm trying to update and its said U43M1D207 error code

  I have nikon d7200 and I the beidge does not open in the first. I'm trying to update and its said U43M1D error code

  update by downloading the files directly and then apply them:

  pre cc updates: http://www.adobe.com/downloads/updates/

  CC updates: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html

  updates CC 2104: http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html

• I want the cursor to be in the address bar when you create a new window; It works for new tabs and a new private window, but not in safe mode.

  I tried following the advice offered in the different threads bit I found on this but nothing works out. I want the cursor to be in the address bar when I open a new window or when firefox opens without restoring a previous session. I solved the problem for new tabs via subject: config, but it does not work for the new windows. I tried safe mode and the problem persists. In a new private window, the cursor is in the address bar.

  A new window opens the homepage (default: subject: House) and not the new tab page (default: subject: newtab).

  Some of the built-in pages set the focus to the search bar on the web page, just like the Google site only.

  You can use a bookmark in the bookmarks toolbar that opens the subject: blank page.
  If you hold down the SHIFT key when you click this bookmark, then you open a new widow with this page.
  Otherwise, you need to set the home page to about: blank or on the point: about to have easy access to all the pages.

• I have a Hp and the micro build does not work how to fix this?

  Can someone help me please? I have a HP T5800 and the micro build does not work how can I solve this problem?

  Hello

  Check with HP, their drivers support and documentation online and ask in the forums about known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ========

  It's probably the pilots who are responsible and who may not really be later or they need to be
  re-installed anyway. The best way is to manually review using the methods below.

  References to Vista also apply to Windows 7.
  
  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek High
  Audio definition (this is an example and you can have an other name/maker).

  Write the description and the model double click on it - tab drivers - write down
  Version. Now click on update drivers who cannot do anything as MS is far behind certifying
  drivers. Then CLICK RIGHT on it and UNINSTALL - REBOOT - this will rebuild the driver
  stack.

  You can have the default windows or a former certified pilot and it's all or part of the
  issue.

  Now, go to the site of the manufacturer of the system and get the latest Audio/Sound drivers - download - SAVE - go to
  where you put - right-click on Reboot - RUN AS ADMIN-

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
  and then install the latest version. Restart and check after each test, not
  rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
  installed shows upward on the tab of the driver.
  
  Go to the site of the manufacturer of the device, and then search for the even more recent drivers and install repeat
  operating mode. Download - SAVE - go to where you put them - click on - RUN AS
  ADMIN - Reboot

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (updated drivers manually using the methods above is)
  to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  The volume of the audio recorded by sound recorder in Windows Vista or in Windows 7 is less than
  in Windows XP (or Vista)
  http://support.Microsoft.com/kb/973446

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• new popup window does not open on Windows

  Hello

  When I open a new window in an extension of first HTML5 on Mac, it works,

  but no window opens under Windows.

  NewWindow = window.open ('www.adobe.com', 'name', 'height = 200, width = 150');

  Trying to apply moveTo() or focus() after open() returns cannot... call to undefined method.

  I wonder what causes this, probably he just gets blocked. By Windows? First on Windows? Chrome in the extension on Windows?

  Is there anything I can do about it?

  I can't open it in the default browser because ultimately the popup window is a Paypal popup

  opened by a Web page loaded in an iframe - that gives the same result while trying to open a window directly from inside the extension as described above.

  Thank you

  Jeff.

  It is a known issue with the CEP; We have disabled these methods (with window.open() or url >) to open a new page. A work-around using the API CSInterface.openURLInDefaultBrowser (url) to open it in the default browser in the system. I'm afraid that CEP provides no other methods to bypass if openURLInDefaultBrowser() does not fit your needs.

• HP Dv6-7029 new notherboard and new processor still does not?

  First Ihad a noisy, then computer fan noise stopped 3 times after being on for a few seconds.
  Fan has been cleaned, then flashing light CAP lock.  I have replaced the motherboard, replaced the processor, fan works and I still don't have the blinnking cap light locks.  I just give my computer to my computer guy because he does not know what what the hell it hurt.  ALL the IDEAS that were not covered to a repair? Oh also, we checked the memory and which was very good.

  The only other thing I can think about is perhaps is the power cable from the CA Jack to the motherboard. You who reused right?

• Apple Support communities / software Windows / Boot Camp upgraded to El Capitan and now Bootcamp windows does not start

  First of all, thanks for all the help I get.  I upgraded a couple of days to ELC.  After that, the boatman partition disappeared.   I managed to get bootcamp to be visible again in the Finder with a reconstruction of my GPT4.  But when I try to rebuild my MBR, I see only 3 partitions and non of them are the bootcamp partition.  Here are the results of the different queries can help the expert here what I'm doing wrong.

  My mac is a 2010 MBA.

  sudo fdisk/dev/rdisk0

  Password:

  Disk: geometry / dev/rdisk0: 14751/255/63 [236978176 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 0 0 2 - 25 127 14 [1-409639]

  2: AF 1023 254 63 - 1023 254 63 [409640-174512312] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [174921952-1269536]

  04:00 0 0 0-0 0 0 [0-0] unused

  Sabri-MacBook: ~ bb_504$ sudo TPG - r - vv show/dev/rdisk0

  See the TPG: / dev/rdisk0: mediasize = 121332826112; SectorSize = 512; blocks = 236978176

  See the TPG: / dev/rdisk0: MBR suspicious to sector 0

  See the TPG: / dev/rdisk0: Pri GPT to sector 1

  See the TPG: / dev/rdisk0: GPT Sec at sector 236978175

  start index size summary

  0 1 MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 174512312 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  174921952 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  176191488 60786655 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  236978143 32 table dry GPT

  236978175 1 dry GPT header

  sudo gdisk/dev/rdisk0

  Password:

  GPT fdisk (gdisk) version 1.0.1

  WARNING: Open with shared lock devices will not have their

  table partition automatically reloaded!

  Scanning partition table:

  MBR: hybrid

  BSD: absent

  APM: absent

  TPG: present

  Found a valid GPT with hybrid MBR; using GPT.

  Command (? for help): P

  Disk/dev/rdisk0: 236978176 sectors, GiB 113.0

  Logical sector size: 512 bytes

  Identifier (GUID) of disc: 00005B53-75AE-0000-2978-0000C1210000

  Partition table contains up to 128 entries

  First usable sector is 34, last usable area is 236978142

  The partitions will be aligned with the boundaries of sector 8

  Space free total is 6 sectors (3.0 KiB)

  Starting number (sector) end (sector), Code name of size

  409639 40 1 200.0 MiB EF00 EFI system partition

  2 409640 174921951 83.2 giB customer AF00

  3 174921952 176191487 619.9 MiB AB00 Recovery HD

  4 176191488 236978142 Microsoft giB 0700 29,0 base data

  Command (? for help): R

  Recovery/processing command (? for help): O

  Size of the disk is 236978176 sectors (113.0 GiB)

  MBR disk identifier: 0x0000121F

  MBR partitions:

  Code of State sector Boot start end sector number

  1 1 409639 primary 0xEE

  2 409640 174921951 primary 0xAF

  3 174921952 176191487 primary 0xAB

  1 Please after the release of

  sudo dd if = / dev/rdisk0s4 account = 1 2 >/dev/null | hexdump - C

  2. using the 'o' command 'r' menu shows you the current MBR (that matches your output of Fdisk). Two of them contain 3 entries. When you use the command 'h' and provide the list of partitions to Gdisk, it will build a new MBR to match your GPT based on what you provide in the partition list.  Please see No Bootable Device Error - early 2014 Macbook Air for example.

• Update CC info and 10 drivers Windows does not solve the problem

  I'm on a Dell 64-bit computer using the Intel HD graphics driver.  I also have a creative cloud subscription.  Until a few months ago, I was able to use 3d in photoshop and had no other problem with one of the applications.  I started to receive an error message when you open Illustrator who told me that I have a driver was updated.  I foloowed the instructions, then each link and fact what ANYBODY suggested to try to solve this problem.  If it's on the internet and on this subject... I tried already.

  So, now I turn to you guys for asking the question plaguing my mind for over a month now... What's wrong?  Is this a problem of creative cloud?  What is my drivers?  What is my operating system? Is it me?

  I downloaded Intel update utility... it tells me that it cannot find the drivers for my product... but I know that they are there because my CC app preferences show that I use the Intel HD drivers.  I've also updated manually each individually about a week ago.

  I updated my operating system, I refreshed even my computer, all redownloaded and updated of the CC apps... but nothing works.

  Can someone tell me PLEASE in the right direction?  Thank you!

  Hi called,.

  I don't exactly know about you, but I can tell you that the Intel integrated HD graphics are not sufficient for use for most of the CC apps. You want to have a dedicated graphics card with at least 2 GB RAM video. This ability becomes more and more necessary, because the CC apps do more appeal to the graphics capabilities of the card. Photoshop is a good example, with each new version, the graphics card requirements have become more demanding.

  Mike

• I forgot my administrator password please how can I get my password please tell me and then my windows does not accept CD or DVD please

  I rember my password windows vista plz administratpr help me how can I get it

  E-mail address is removed from the privacy *.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password
   
   

  Best regards
  Singapore Web hosting

• whenever I sign in yahoo mail it freezes and then says windows does not

  Help me

  If jaykaywa solution does not work, please transfer your question in Forum Internet Explorer: http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/threads where people who specialize in IE issues (including those involving Yahoo) will be more than happy to help you with your problem.  This is the wrong forum for your question.

  Good luck! Lorien - MCSA/MCSE/network + / A +.

• Windows does not load and displays a black screen when it is connected to the power supply

  Original title - Windows Vista running on my laptop Sony VAIO

  Trying to turn on my laptop using the built in battery nothing happens.  When the laptop is connected to the power supply and turned on Windows does not.  It shows something in the sense that it does not properly off.  It tries to load back to a system restore point before the last stop, but seems to fail again during this process.  All that is displayed is a black screen. Currently the power on light is on, the battery light is on, but the drive activity light is off.

  Yet once again, I switched on the laptop and finally the Startup Repair process is automatically called.  After the display of the bar to attempt repairs, the system has been repaired successfully.  As a result, the I ran my Norton anti-virus, followed by Windows Updatesoftware.

• RT News showing extension does not then update to version 40.

  I have re-installed the latest version and new RT extension does NOT appear where the other extensions (for example, ABP) appear.
  Is returned to the 39.0.3 Version and it is very good.
  Of course, there is a bug that needs fixing.

  An updated version of the - https://addons.mozilla.org/en-US/firefox/addon/rt-news/ - has been released and now works in Firefox 40.0.3.