I have four recovery disks that after I bought my computer, I did. These disks can be used to install Windows on the new drive?
My computer came with Windows 7. Recently, my hard drive failed. I have four recovery disks that after I bought my computer, I did. These disks can be used to install Windows on the new drive? YES! I just did mine 01/01/2016, installed a new WD 500 GB HDD black on my laptop ASUS K52F, took my DVD 4 restore disks and restored to Win 7 Home Premium, more 10 Windows, which is sitting on my old HDD in the trash. I'll stick with my Original OEM OS and never improve to WIN 10 times. NOTE: The only time the restore disks do not work is when you replace your motherboard. Tags: Windows I'll buy a kit of barebones without preinstalled operating system and was wondering if I could use my Windows 7 upgrade disk to install Windows on the new PC. Short answer 'NO '. Upgrade means upgrade. An upgrade can only be used to upgrade a previous version of XP or Vista. You will need to purchase a full retail or OEM version to install on a computer without an operating system. Windows 7 cannot see is not my SCSI disks when I try to install. As the IDE drive is showen but is not usable. Is there a FDISK program that can be run to solve this problem from a command promt? Hello You try to access BIOS and change the SCSI to IDE in the BIOS or Raid in IDE and try to install Windows 7. If it fails, contact your SCSI manufacturer for the latest drivers for your SCSI and install it by clicking on load drivers and try to install Windows 7. Hope this helps and works. Chris System recovery disks, do not install it on the new drive SDD Hello I have updated the HARD original SDD disk disk drive. Looking at all the forums and I tried everything I read, but updates still did not work. Finally formatted the drive and then used the original system restore disks that work fine on the old hard drive but Windows end retsarting continuously after all 3 disks installed. He tried to finish the installation but then gets and error and restarts and loops just over and over again. Is this something to do with the 4 k sectors? Thank you Hello > Finally formatted the drive and then used the original system restore disks that work fine on the old hard drive but end Windows restarts continuously after all 3 installed drives Generally, the Toshiba recovery disks should install Toshiba image on the new HARD drive or disc SSD and the unit should start correctly. To be honest, I'm not very well why the laptop keeps restarting after the installation of m. Is that the Toshiba recovery disks would format the drive HARD (or SSD) and create the same partitions and sizes of the partitions. In case the installation of the system would not work by using the recovery discs, I would recommend you trying to install the system by using the Microsoft Windows CD clean. The essential drivers may be downloaded from the Toshiba UE driver page. My Hard Drive crashed and I have no disk Vista to install vista on the new driver If my hard drive internal on my desktop Hp pavilion fried. After getting a new, comfortable, I now need to install vista. When I originally bought the computer the drive didn't come with it, when I asked if I could have, they said to call the guy, and if I have my product key I will be ok... problem is, a. it seems that questions of others who is not a solution, (b) I can't find a number to call and responds properly to my problems , and c. microsoft don't stop trying to charge me, something that I want is unfair if I already paid for the product. so because my hard drive is done I can't recover vista off the old drive hard as other answers suggest that I try to do No solution, I'd love to hear, thank you All support for your computer comes from the manufacturer of your computer, not Microsoft. How to get Vista recovery Media. There is no Vista free download legal available. http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=au Contact your computer manufacturer and ask them to send a recovery disk/s Vista set. Normally, they do this for a cost of $ small. Or borrow a good Microsoft Vista DVD (not Dell, HP, etc). There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system. If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks): Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive. At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu http://support.Microsoft.com/default.aspx/KB/918884 MS advice on the conduct of clean install. http://www.theeldergeekvista.com/vista_clean_installation.htm A tutorial on the use of a clean install http://www.winsupersite.com/showcase/winvista_install_03.asp Super Guide Windows Vista Installation After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them. Save all data, because it will be lost during a clean installation. See you soon. Mick Murphy - Microsoft partner Hi, the first thing I did when I got my Envy cell phone, K203TX, was to create a set of recovery disks. Then I discovered that the laptop has several questions. HP sent me a technician on-site, and technology, said these problems were caused by a material defective number (display board, motherboard and the case has a defective battery lock). It helped me to return the laptop as DOA. The problem is, HP store couldn't make me K203TX one another, I paid like $150 and upgraded to a fancy K204 TX. I have now the 204TX and this laptop has no problem at all, it's as good as it can get. My drive recovery K203TX of envy is always with me. Question > can I use these discs to recover my K204TX disaster? Or I'll throw these drives and create a new set of recovery disc for this computer? The 203 was 15.6 "diagonal FHD (1920 x 1080) WLED glare-backlight http://support.HP.com/us-en/document/c04529223 The 204 a 15.6 "diagonal FHD WLED-backlit touch screen (1920 x 1080) http://support.HP.com/us-en/document/c04529254 I would like to put the old discs but do a new series of the new laptop as he has touchscreen. REO My recovery disk can be used on another computer original title: Help windows vista frend wonder borrow cd Hi I wonder if my frend can use my cd of vista for my old pc on him because he has a virus and need to reinstall windows, but did not know where his cd of vista. so can I use my cd on her? Pleae respond quickly Greetings: Johnny Landmark. You cannot use an Asus recovery disc and product key to fix the Acer computer. Your license of Vista Asus is linked to YOUR computer. It won't work on his. It won't pass activation and probably will not yet be installed... ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer Bring it to contact Acer at the above link and buy a set of Acer recovery disks. They normally sell them for a cost of $ small. Or, follow my advice in my 1st answer and try and borrow a Vista DVD from Microsoft. See you soon. Mick Murphy - Microsoft partner Hard drive with recovery partition failed, how do I restore Windows on the new drive? How can I get my sons pc working again? Hard drive failed and restore vista on a partition on the disk. No backups. Replaced the hard drive but obviously not Vista. I have the genuine key. Can I download the trial or something then activate with the existing key? Contact the manufacturer. They should provide you with recovery disks. Hi everyone, I have my hard Western Digital RMA drive due to non repairable bad sectors. I currently have a version of windows upgrade 7 (I'm sure that my parents lost the activation key for > _ >) installed on the hard disk. Is it possible for me to transfer this Windows 7 nine hard disk? Or if I can't find the activation key to upgrade of version, can I install the previous version of windows 7 that I used before the upgrade, because I actually still have the product key for this copy. I wanted to understand this first before you begin the RMA process so I'm not stuck without an operating system once the replacement drive arrives. Thank you! If you do not have a license, you will need to buy a new one. If the license you say that you have is a retail license and did not come preinstalled on a computer or is not a version upgrade, you can use it. They must be of the same edition. Original title: help with hard drive of the computer. Flow of the problem: My aunt tried to install windows 7 on the previous copy of windows 8. Needless to say that it doesn't work and it has messed up the hard drive. So, I bought a vacuum. I formatted the hard drive using my other windows computer to have 2 partitions: a boot partition and system partition, and then used the program WinToUSB to install windows on the hard disk. The reason I did it is, because no matter how many times I changed the BIOS in my laptop of aunts, it wouldn't boot from the DVD player to load the windows software. After a few hours, I found WinToUSB. Once windows has been installed, I plugged it into the laptop. For a few hours, I didn't know what to do, because the computer does not recognize the hard drive (he said: "Not detected"). I decided to start from legacy, and then the screen deals «intell...» » and a bunch of dates, etc all the stuff on the screen to load legacy if you know what I mean. He said "not plugged in the media. Check the power cord. Then quickly changed screen before I can read almost anything and it goes to the normal windows screen black (with 4 colors). I said to myself, how can he be loading if the hard drive is not detected... Once it is loaded, he brought me to the blue screen (blue screen of death, if you want) I turned the computer on again, always noticing the hard drive was not detected. I ran all the recovery/repair options I could and turned off the laptop. I came back a few hours ago and I loaded the computer again and went into the BIOS. He said that the hard drive has been detected and said the news about this, as usual. However, at the start of the legacy of windows loading screen, it said still not detected. I then started to windows to see since it is now detected if that fixes the blue screen. Yet, there is no. I tried to go to the normal windows and screen remains blue. any ideas? Hello Chris, Thank you for visiting Microsoft Community. According to the description, it seems that Windows was not properly installed on the hard drive. I'm not sure how to work the software from third-party manufacturers WinToUSB and reliable installation process is. Microsoft does not recommend using any third party tool to install Windows on your computer, the use of these third-party tools can cause serious damage to your computer. I would say to format the hard drive once more and try to install Windows through normal Windows installation process. Refer to the section "using the installation option custom if no operating system is installed" in the thread below. Installing and reinstalling Windows http://Windows.Microsoft.com/en-us/Windows/installing-reinstalling-Windows#1TC=Windows-7 If you are not able to install Windows on the hard drive at all, I suggest you to contact the hard drive manufacturer to obtain a diagnosis of material performed on the hard drive. Do not hesitate to write back for any further assistance with Windows, we will be happy to help you. How to install Windows from the recovery in mSATA SSD partition? Hi all I intend to install mSATA SSD on my ThinkPad E420 soon. My laptop comes with the recovery partition in the hard drive. How to install Windows on the SSD drive? I am familiar with the WIndows installation of optical media, but never to the recovery partition (which I assume where is the installer of Windows). Thanks in advance. Best regards Haris Hello Sorry, I have no idea on how to install directly from a separate to another drive, but you may want to check this . You will need 1 CD (start) and a 4.7 GB DVD (data) because Lenovo recovery adds all this bloatware in factory settings. That said, if you want a clean install, use the Windows disk (in case you do not have the same edition, you can download it legally from the net, google it) and your OEM key for activation. My computer crashed so I did a complete reconstruction. Creative cloud installed, installed Photoshop CC again (I have the license for it). I wanted to update that I did in Photoshop CC (2015) now my licensed copy of Photoshop is in a trial version and I have to buy again? Am I missing somethiMy computer crashed, did a complete reconstruction. Creative cloud installed, installed Photoshop CC. Wanted update me I did in Photoshop CC (2015) now my licensed copy of Photoshop is in a trial version and I have to buy again? Am I missing something? Using creative cloud | Applications creative Cloud back to update evaluation Mode to 2015 CC Hello As the title says after using my laptop without any previous problems, suddenly I can not connect on Windows Vista. I'm 100% sure that the password has not been changed, caps lock, shift, caps lock Num etc is not active. When I bought the laptop, Vista was already installed, so I don't have a recovery disk. Any help would be appreciated. Hello Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten. This is the Information from Microsoft on the problems of passwords; You will need to borrow a Microsoft DVD from a friend, Recovery DVD a manufacturer without these special work options available. If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.
Malware can also cause problems with passwords: Download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking: http://www.Malwarebytes.org/products/malwarebytes_free And here's how to go in Safe Mode options; Select safe mode with networking from the list of options: http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ If the above does not fix it: Here are the different methods to reinstall Vista. There is no Windows Vista downloads available from Microsoft. You can contact your computer manufacturer and ask them to send you a set of recovery disks. They should do this for a small fee. To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall: You need to change the Boot order to make the DVD/CD drive 1st in the boot order: How to change the Boot order in BIOS: http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm "How to replace Microsoft software or hardware, order service packs and replace product manuals. http://support.Microsoft.com/kb/326246 And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer. The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start) Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer. Ask them to the proper key sequence. Some manufacturers have more available Vista recovery disks. If this happens, you may need to try this instead:
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed. Other manufacturers recovery DVDs are should not be used for this purpose. And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs Here's how to do a clean install of Vista using a DVD of Vista from Microsoft: "How to do a clean install and configure with a full Version of Vista ' http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
And phone Activation may be necessary when you use the above installation method. "How to activate Vista normally and by Activation of the phone ' http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html See you soon. Pomp L500-126: I want to reinstall it and don't have no recovery disks Anyone from Romania with a Satellite L500-126? I had a problem with my oem Vista and I want to reinstall and don't have recovery discs. Thank you Hello Satellite L500-126 was delivered without the disc recovery, but with the option of HARD drive recovery! This means that you can recover the laptop without the use if recovery disk. Start Notepad, press F8. Should work I have a Sony Vaio. After that I installed Windows 7, the computer does nor recognize the SD card reader. Someone know whey and how to fix it? Thank you Run Windows Update - it may install drivers that does not get installed on Windows 7 home. If this does not help, look for Windows 7 drivers for this device on the Sony web site. Satellite L300-190 - Wireless does not work in Ubuntu 8.10 Hello I recently bought this Toshiba Satellite L300-190 (PSLB8E-014008N5) of the machine.First of all, I tried to install Ubuntu 7.x, but which failed due to a problem of graphics card. So I try the new version of Ubuntu 8.10, everything works fine, Hello I have a problem with my Apple ID, if I want to download any application or buy anything they show me a straight massage "Your ID Apple has been disabled. I rest my password, but nothing has changed How to solve this problem, I'm waiting for an OfficeJet 5740: Cannot print duplex automatically and can not connect wireless So, I recently bought a new laptop for academic purposes. Back in September, I bought the HP Officejet 5740 because it could print wireless and can print double sided also. Everything worked perfectly fine when I was using Windows 8. In microsoft off Insert row into table 2D retaining the previous values Amendment of data entered in a 2D array and also displayed a table. When the time rolls 3 columns of data are held and then created line. Problem is the line moves downwards, but the previous data is not stored. I tried using shift register, but that SalamHello I am looking how to do program init or reset each midnight IE that I take every day as example and I want this time 00:00:00, 000, all indicators will be boot... AND THANK YOUSimilar Questions
First of all, I cloned the old drive and installed the image but then the updates of windows would not work.
Do I need other drivers?
How can I factory reinstall my Windows 7 disc new SSHD?
But I guess it has something to do with the partitions and sizes of the partitions.
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.
Choose the function: fix my computer and then new window will appear.
Then, you would get a new option with recovery diskMaybe you are looking for