I have HP 4600w with low Vista workstation leveled for XP. I know spend XP to WIN 7?

Similar Questions

• I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  Hi Izzy Nagar,

  ·         Exactly when you receive this error message?

  ·         Did you do changes on the computer before the show?

  ·         Do you have any extended monitor connected to the computer in the past or at the present time?

  Follow the suggestions below for a possible solution:

  Method 1: You can try to reduce the resolution of the screen (lower), then check if the message still appears.

  Check also if the refresh rate of the monitor is set correctly and check the manual of the monitor for assistance.

  Ways to improve display quality

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-display-quality

   

  Flicker of the correct monitor (refresh rate)

  http://Windows.Microsoft.com/en-us/Windows-Vista/correct-monitor-flicker-refresh-rate

  Method 2: Use the option ' enable video low resolution (640 × 480) "start, then update your video card driver and check if the problem still persists.

  a. click the Start button, click the arrow next to Shut Down and then click on restart.

  b. do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  c. on the Advanced Boot Options screen, use the arrow keys to select activate video low resolution (640 × 480) and press ENTER.

  d. connect to your computer with an account of a user who has administrator rights.

  e. If you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information, see the article:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  I hope this helps.

• I have a computer with Windows Vista business on her key. I have a dell windows vista Enterprise drive. the product to activate my acer desktop computer?

  Activation of WINDOWS VISTA oem with another oem drive?

  HI I have a computer with windows vista business on that key. Apparently, I do not have the original OEM drive but I have a dell windows vista Enterprise drive. the product to activate my acer desktop computer?

  Hello

  A manufacturer of recovery disc is designed for a particular brand and computer model; they are not interchangeable.

  Here is the link to order the Acer recovery disks:

  http://us-store.Acer.com/RCD/

  And if the Acer never included a drive to purchase, you should have a recovery Partition on your hard disk to reinstall Vista to how it was when new.

  With an Acer, you press Alt + F10 at startup to start the process of recovery back to new condition.

  See you soon.

• have hp2009m comp with windows vista, how can I get my xbox wireless remote to work on it?

  have hp2009m comp with windows vista, how can I get my xbox wireless remote to work on it?

  Hi Alex,

  You can view the following items and see if it helps.

  Connect a game controller

  Xbox 360 Setup

  How to connect a wireless Xbox 360 controller or headset to your computer

  Demonstration: Creating an Xbox 360 in an Extender for Windows Media Center unit

  You can also get in touch with technical support Xbox for the same thing.

  Xbox 360 support

   Hope this information is useful.

• You want to run the software RAID (more precisely 5) included with Windows Vista Home Premium. Do you know where I can find documentation and how - in?

  You want to run the software RAID (more precisely 5) included with Windows Vista Home Premium.  Do you know where I can find documentation and how - in?

  Hello

  Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.
  Please post your question in the below link:
  http://social.technet.Microsoft.com/forums/en/IECs/threads

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have a problem with a card being inadmissible for the zoom on a phone.

  I have a problem with a card being inadmissible for the zoom on a phone. The Web site has been formatted for the phone using Muse. The plan should be saved in a way in Photoshop or y at - it a setting in the Muse who can fix this?

  Please provide more details, as if the card is integrated an image or a real map generated by widget.

  The generated plan must zoom in/out.

  Thank you

  Sanjit

• I have a problem with installing the driver bluetooth for Windows 8.

  Original title: cannot install the bluetooth driver

  I have Windows 8 Pro 64-bit (upgrade of Windows 7 Ultimate 64-bit).  I have problems with the bluetooth (Intel Centrino Advanced-N 6230) driver that will not be installed.  The

  error I get when using the driver (downloaded directly from Intel) Intel says "did not write the SupportDLL value in the \SYSTEM\CurrentControlSet\services\BTHPORT\Parameters key.

  \Radio support.  Check that you have sufficient access to that key or contact your support team. »

  Windows Update also displays several times this driver, but it fails to install as well.  If I remember correctly, the error is "access denied."  I contacted Microsoft earlier

  technology has taken control away from my computer and found the same problem.  It disabled all startup and restarted, but we do not have to reconnect after reboot, that's why I'm

  contact you again.  I'm guessing that something has gone wrong in the remake because precisely, I noticed it has disabled my facial recognition software, yet when he

  restarted, it took even my face.

  I am logged as administrator and I have also tried to right click on the .exe file and run as administrator, but it does not help.  I tried

  uninstall/reboot/reinstall with no luck.  I also tried several programs microsoft fix - it, but even once, no, I also tried to contact Intel by CAT and they

  were no help either.

  I tried also to navigate to this key in the registry editor, but I get an error message that says "error opening key.  Parameters cannot be opened.  An error is

  This key prevents open.  Details: access denied. »

  Finally, I'm frustrated and ran a repair of Windows 8 (could not restore because when I upgraded to Windows 8 Windows 7, somehow restorations have been disabled and I did not notice for about a month).  Then, I used the bluetooth driver directly from intel and everything works again.  I will say that when I ran the repair, he removed Windows Media Center (since it is therefore more part of the OS, but an add-on), but it's a very small price to pay for everything works correctly.

  Thanks for the help everyone!

• I have a comp with windows Vista Home Basic 2007 Office. Can I upgrade to vista home premium? too many things are not compatible with windows 7.

  This upgrade to vista family premium is still available? is this useful? How much would it cost?

  where do I go to windows 7 and just deal with incompatible programs?

  or just forget it and leave it as it is until I can afford a new?

  * I just did a full factory restore, which helped.

  but when I reinstalled the operating system, it wouldn't let me put in the same primary place on drive C?

  I had to put it in a secondary partition and it saved a lot of old stuff and labeled "old windows"?

  I do not understand why it does this. is there something in the old system files I need?

  cause the entire purpose of the restoration was to get rid of all that. now, I have essentially 2 copies taking up room.

  because he saved much of the old system files, there's no enough space in the main square.

  Do you think I can manually remove the "old windows" copy C drive without doing any harm to the computer?

  I did enter and delete all of the photos and docs & downloads which he recorded, that I didn't, with no negative consequences.

  but it still has a lot of program/file system I fear not remove.i shouldn't need them... right?

  everything I need should be there since the operating system reinstalled, I just did?

  Help?

  Marc Zanyk

  By all means delete the windows.old folder.  Use disk cleanup.  You will find a box to check the detached, although it will not be called "windows.old" specifically.

  It seems that your computer has a recovery partition.  You would not be able to install.

  As for Home Premium, Yes, you can switch to HP.  If you can still find a copy.  Vista Express upgrade is no longer available since Vista is no longer available at a retailer.  However, you can find a copy on eBay.  Make sure you buy a retail copy and not an OEM copy.  You will not be able to update an OEM copy.  No matter if the copy of detail you find is a copy of full or upgrade license.  You'd still be able to do an upgrade in place with one or the other.

• I have Toshiba laptop with Windows Vista Home Premium. my cursor keeps going out of control and autour jumps, I'm not very computer and need someone to talk me through any help! ____

  How can I stop my cursor jumping out of control, I have windows vista home premum pack use a touchscreen Tablet

  Hi Mypoppy,

  Exactly when this happens to you (using a particular application or game)?

  The same thing happens if you use an external mouse?

  Contact Toshiba technical support to check if there is no update touch pad software. Follow the link given below to Toshiba support

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't use Microsoft Hotmail with Firefox 3.6.24 and Windows 7. I click on an email, but nothing happens. I did not have this problem with Windows Vista. Any solution would be greatly appreciated.

  Windows 7 is on a new Dell Inspiron desktop computer. Windows Vista is on a Dell Studio laptop I've had for a while. Hotmail also works very well on the new computer when I use IE9.

  Upgrade your browser Firefox 8 and check

  • getfirefox.com

• I have a dell with windows vista, can I change my wondows vista to Windows 7 and why would I do so?

  window 7 there an anti-virus is easier to use vista... can I get a free trial?

  It's the update of Windows Froum. http://www.Microsoft.com/Security_Essentials/

  Read the info on the link above for Microsoft Security Essentials

  http://www.Microsoft.com/Windows/Windows-7/get/Upgrade-Advisor.aspx

  Windows 7 Upgrade Advisor.

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  Railways upgrade to Windows 7 at the link above.

  For any other question of Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 forum for questions on windows 7.

  Windows 7 questions should be directed to the it.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite A300D-15B with driver Vista 32-bit for Win 2008 possible?

  Hi all

  I have a laptop A300D-15B, and recently I have installed Win 2008 (32 bit) and installed the Vista 32-bit drivers worked like dream. But when I install the card reader (O2) it crashes (blue screen)?

  has any one face this problem?

  any help?

  Thanks in advance

  concerning
  Ganesh

  > But when I install the card reader (O2) it crashes (blue screen)?
  Looks like this Vista driver is not fully compatible with Win 2008 Server and therefore you receive and BSOD

  Seems you have to use this operating system without this special driver

• I have a problem with my account of switching for the guest account.

  Original title: my account set to a guest account

  My account has switched to a guest account and I don't have an administrator account on the system. I started in safe mode but when I run "net user administrator / Active: Yes or net user administrator password 1234" I get an error message. Nothing helps. When I try to change the permissions, he asks an Admin password that I did not and I can't even select the "Yes" button. All this happened when I pass the account and the account for Auto-Login.

  Here you go:
  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point before your account is downgraded
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.
  If you still have problems then to be a little more specific. Reports "I get an error message. Nothing helps. " strictly tell us. You must cite the explicit screen messages.

• Just lost my C drive.  I have a card with the code on it, but do not know how it be reinstalled.

  Just lost my C drive.  I have a serial number of product code of the card, but do not know how to do this

  Download from Download Adobe Acrobat products. Standard, Pro | DC, XI, X

  Install and enter your serial number.

• Need help with script java folder level for silent registration with unique file name

  That's what I'm trying to do

  1. when a person completes the request on one of our computers in the office, there will be a button send at the bottom of the application.

  2 submit the application on is automatically stored on the local server with the file name determined by the fields name and surname on the application.

  example - John Doe Application.pdf

  Saved in the folder C:\Users\Station1\Desktop\FinishedApplications

  3. This is the example of code I found, but I don't know how to enter which fields determine save name and where to save it to.

  http://thelivecycle.blogspot.de/2015/06/save-with-new-name-in-specified.html

  http://thelivecycle.blogspot.de/2015/06/save-with-new-name-in-specified.html http://thelivecycle.blogspot.com/2009/11/save-form-to-specific-directories-and.html

  Thank you!

  Lol this is the part that you need as a script to the folder level:

  var lcbSaveAs = app.trustedFunction (function (vDoc, vPath) {}

  app.beginPriv ();

  vDoc.saveAs ({cPath: vPath});

  app.endPriv ();

  });

  This is the code you use in your file:

  lcbSaveAs (, "/ C/users/specialisee1/Desktop/result /" + this.getField("FirstName").valueAsString + "" + this.getField("LastName").valueAsString + "Application.pdf");

  lcbSaveAs is the name of the function of trust.

  vDoc.saveAs is the Document object, call the saveAs method.

  I don't know what oDoc.SaveAs is, or where you got it.