I have I have Vista Ultimate-32 system with three SATA HDD installed.
I have Vista Ultimate-32 installed on my system with three SATA HDD. The installed HARD disk are detected by the BIOS systwem but o ione disk is not detected by Device Manager. I AI TRIED SEVERAL TIMES BY FOMATING THE PARTICULAR DRIVE AND EVEN REPLACED IT BY THE ALL NEW BUT HE does IS NOT DETECTED BY Device Manager AND NOT SHOWN IN mYcOMPUTER
jAVED aFZAL
E-mail address is removed from the privacy *.
Hi Javed Afzal
Step 1:
You can check if all connections for the reader are clean.
Step 2:
You can also check if the drive is visible in disk management. To open disk management followed the steps - below
a. Click Start and in the search box, type Run.
b. in the Run dialog box type diskmgmt.msc and press ENTER. This will open disk management.
I hope this helps.
Tags: Windows
Similar Questions
-
have w 120 GB HD on 60 GB free DVD have 32 and 64, as well as 2 DVDs with Office 2007 Ultimate. Could save the address book and all the other files, I want to keep and remove up to a 32-bit skeleton and then install a 64 bit os nude and would only be concerned on my ISP software as I have Comcast XFinity digital phone and Internet and a digital HD video recorder a 1986 Radio Shack Color TV at the wheel (the 1986 $500 that was a beauty for its time and is still.) My PC is an emachines T3616 and I have 2 GB of RAM installed (max) it is possible in this way?
Hi Herman,.
You can try to use Windows Easy Transfer to transfer data and settings to C: on D: drive and install Windows Vista Ultimate 64-bit on the C: drive. After installing Windows Vista 64 bit on C: drive try to reuse Windows Easy transfer to transfer the data back (from D: to C: drive).
You can also take an external data backup before you attempt the Installation of Windows Vista.
For more information, you can consult the following articles:
Transferring files and settings: frequently asked questions
Installation and reinstallation of Windows Vista
Hope this information is useful.
-
Change a Quicktime movie in a video that can be recognized by Windows Movie Maker. I have Vista Ultimate.
Change a Quicktime movie in a video that can be recognized by Windows Movie Maker. I have Vista Ultimate.
================================
May be worth a try to convert MOV to WMV...There are many programs that can do conversions...
The following freeware is an example...:(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Format Factory
http://www.pcfreetime.com/
(FWIW... installation..., you might want to
Uncheck the box 'all' boxes on the last screen)First... after the download and installation of Format
Factory... you can open the program and
left click on the toolbar, the "Option" button and
"Select an output folder to" / apply / OK.
(this is where you find your files after they)
are converted)Drag and drop your video clips on the main screen...
Select "all to WMV" / OK...
Click on... Beginning... in the toolbar...
That should do it...
Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
I have vista ultimate 64 and I try to run HAWX in DX10. It is gray in the game. When I run DXDIAG it says that I'm running DX 11. How can this be? How to register for dx10?
Gearrunner,
I have Windows 7 32-bit last month. I installed the demo of HAWX and he ran a program compatibility Wizard after installation. He showed that DirectX 10 has been installed. When I run DXDiag, I also show DirectX 11. Now, I have installed DirectX 9 .0c on this machine. Then you can try to install it and see if that makes a difference.Of course now that I've tried the demo you have shot me in another game I have to play. :)
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
I am running Vista Ultimate 64 bit and in order to install the internet security package, I need to install SP2. Belongs to this normal windows update or do I have to download it from Microsoft?
Windows Vista SP2 came out mid-2009. You should have gotten a long time ago.
-
Can I rip a DVD with Vista Ultimate operating system?
Can I rip a DVD with Vista Ultimate operating system?
What is a DVD protected against commercial copy or a House
because of the DVD?Homemade (copy unprotected) DVD is easy...
Simply insert the DVD in your DVD player... to... Start /.
Computer... right click on the DVD drive icon and
Choose explores... you should see the directory of the DVD.File 'VIDEO_TS' Now... Copy/Paste or drag/drop...the
from the DVD in a new folder (renamed to)
the DVD corresponding) on your hard drive and what's.If you have VLC Media Player on your system (for example)
you could click with the right button on the VIDEO_TS folder and choose...
"Play with VLC Media Player" and the video will play.These files can be very large, so copy can take some
time... have patience. -
Win 7 thinks that I have a 32-bit system when I try to install the 64-bit and he thinks I have the 64 bit when I try to install the 32-bit version
I know I am running vista 64-bit, it states that in the system propertiesI have a HP Pavilion A6700, when I went to upgrade to Vista 64 bit to win7 64-bit (win7) said I can't upgrade an OS to a 64 bit one, so I tried the other way and tried to install the 32-bit 32-bit version, and then I got the msg, you cannot pass an OS 64-bit for a
32 bit one, I looked in the system properties and it is running vista 64-bit
Other than a clean install what can I do to improve?
and if I do a clean install which are the files I need backup so I don't lose my data?Make sure you have the latest Service Pack for Windows Vista installed. Which edition of Windows Vista 64-bit you're running and what edition of Windows 7 you are trying to upgrade to?
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: sfc/scannowThis will check for any breach of integrity
Restart your system
In addition, run the Windows 7 Upgrade Advisor, it will scan your system and provide a report telling you if your PC can run Windows 7, and if there is no compatibility problems with your hardware or programs.
Windows 7 Upgrade Advisor:
http://www.Microsoft.com/downloads/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15&displaylang=enAlso make sure that your BIOS is up to date. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com
-
Original title: clean install Win 7 64 bit
Like others, I have a problem with a clean install of Win 7 64 bit Proffesional. I have a Samsung NP900X4C laptop (with a 256GB SSD installed) and screwed up through the installation of Win7Prof instead of the upgrade. A lot of the buiult in functions do work not (Wireless; Hiring of video, USB Ports etc.) and to top it all off I get now blue screen errors...
If installing from an external DVD drive, crosses, it shows that the HARD drive has already 4 partitions.
Partition 1 (e :)) Disk0
Disk0 Partition 2
Disk0 3 (C :) Partition System
Disk0 Partition 4 hidden OEM Partition.
So far I have just selected Heve installation on Partition 3 C: System.
Y at - it a utility that I can use to retrieve the data from the OEM Partition I want to return to the initial state by default if possible.
If not what is the best utility to use repartition (how many and what size?) and format the HDD.
Cordially chrisxsmith
The best you can do is to contact Samsung and request recovery media to restore your system to its factory default state.
Call Samsung to get a recovery disc - to find a phone number for your location:
Thank you Andre, very appreciated, unfortunately Samsung and their Tech Support here in the UNITED Arab Emirates was not as useful.
I managed to keep the button restore during the 5 sec boot process that initiated the request 5 restore Samsung which was then able to take the original installation of the hidden Partition image.
Fortunately the issue is resolved.
-
I have an old Dell computer with Windows XP Prof installed including service pack 1. All of a sudden, I'm not able to use my password to connect. I'm sure that the password is typed correctly, but it does not accept it. Now what?
original title: password problemHello
Please try some of the suggestions provided in the following article:
-
Since the update of my pc based system with 10 windows and install the last Prime Minister CC when I drag a clip on the timeline audio does not come with it. I can hear audio playback in the preview window of small file so the audio is there, but it does not appear or play on the timeline. I can drag an audio file of Ms on the timeline, but I need audio from my original file to synchronize my audio file recorded independently - used to be no problem... any ideas what I can not edit now?
Hi Neil,
Drag / drop may not work if you don't have any enabl; e source patch or did not target the track for the same thing.
https://helpx.Adobe.com/Premiere-Pro/using/source-patching-track-targetting.html
Vinay
-
At the end of August, 2011, I put Vista up-to-date with three recommended updates. I've never updated with the optional updates. After the required reboot, my computer did not start, did not start in safe mode or last good configuration mode. Then the blue screen with error fatal appearred. Everything is gone: power supply, hard drive, motherboard. That's happened? I know that the same thing happened at other institutions. What I can do!
Hello
I think you should use "Windows Vista installation disc" do "Startup Repair" - here's how do:
http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
part:
How to use Startup Repair?
LC -
I tried to remote desktop access and you can find the program.
Hi VDeal,
Don't know how you try to perform a search, open remote by clicking Start, all programs, accessories, and then clicking Desktop connection Remote Desktop connection.
Note: You can also open Remote Desktop Connection (RDC) by typing "mstsc" (without the quotes) in the search box of the start menu.
For more information about the remote desktop connection, please see the link below
DRC is available on Windows Vista Ultimate Edition.
Thanks and greetings
Ajay K
Microsoft Answers Support Engineer
***************************************************************************
Visit our Microsoft answers feedback Forum and let us know what you think. -
I can't get Age of Empires III to install on my Vista Ultimate 64 system!
I tried to install several times without success. I don't even get an error message! The installation box runs through the routine of preparation and then closes without any report either.
I did some research and found quite a long thread on this forum since 2009 by a person called Summerbreeze who seemed to have a similar problem. After several posts back the thread died suddenly without any apparent resolution. Apparently, it is possible to get this game to work on Vista because I keep seeing questions and reports on various hardware issues with Vista users.
I am running Vista Ultimate 64, SP2, on a workstation Intel S5000VXNSATA that has two processors dual core Xeon 5130 and 4 GB of RAM. My video configuration is a dual monitor connected to a graphics NVIDIA Quadro FX 3450/4000 SDI card that carries the 256 MB of RAM on board. I have 2 hard drives of 160 GB configured in RAID 0, but I have only about 50 free BM for the moment. I am currently compressing readers in an attempt to free up space.
Any of my equipment from the list of incompatibility and I certainly sufficient power to run this thing, then why the problems?
Thank you
J
Hello
To install Age of Empires 3 on your system, you need at least2 GB of free hard disk space, I suggest to clean up disk space on the system and then try to install Age of Empires 3 on the system.
You can also visit the link provided below for more information onAge of Empires 3 , including the required configuration:
http://www.Microsoft.com/games/PC/AGE3.aspx
You can also refer to article provided below to use a disc Clean maximum of free disk space:
http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup
It will be useful. Please return with the required information so that we can help you better.
Thank you, and in what concerns:
Naman R - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
-
I am running 10.10.5 OS on a Macbook. While surfing, I got a message "last page you have open infected your computer with a virus. Click here to clean the virus. "It appeared to come from Apple but aware that this message could be the virus. Is there a way to check my system for a virus, or what I do check at an Apple reseller or a store?
The message is a scam. There is no virus for osx.
-
have a ultimate black screen vista under contract with living mouse, pc will only boot in safe mode, downloaded hotfix kb977675-v2 - x 86 but it will not install in safe mode
have you tried the manager used tasks related to bugs
Msconfig
Explorer.exe
and have had no joy... Please heeeeeeeeeeeelllpppppp
Hello
It is the fix in case there are any information it helps.
A computer that is running Windows Vista or Windows Server 2008 stops responding at a black
screen early in the startup process
http://support.Microsoft.com/kb/977675Microsoft - contact patch Support issues.
http://support.Microsoft.com/contactus/?ws=support#TAB0======================
Other troubleshooting methods that can help.
Why my screen is black when I start Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7References to Vista also apply to Windows 7.
No registration necessary data and re - install Windows 7 might be the best option, but here are a
few others.You can save your files by putting the drive in another computer or an external hard drive enclosure, then
saving them. Do this using several methods to redundantly. Of course, a real computer
Shop or the manufacturer of your system can help to recover the files.--------------------------------------------------------------
You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel
-Double click - Driver tab - click on UPDATE driver - device Manager - map - graph
then right click on the device and UNINSTALL - REBOOT.Another method to try to get to the desktop (try in normal Windows Mode without failure)
is CTRL + ALT + DEL and the processes tab find EXPLORER.exe and END PROCESS on it.
then on the tab Applications - lower right - new task - the type in EXPLORER.exe. Safe mode is
accessible by tapping F8 as you start several times.First check this thread in case it is simple and if not to come back to this thread.
http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a
Black screen problems are extremely difficult to repair and all hotfix is usually a hit or miss
base. That there is no information on a black screen as there is just a blue screen
adds to the difficulty. Often using a restore point or Startup Repair will have no effect.
You can try a google to see the proposed repairs, whom some have worked however these
cover a wide field of efforts.Here's a video of one of them.
http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1
Here's another fix
http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.phpYou have a window 7 disk? You can try restoring the system to it. If you do not have the
discs, your system manufacturer will sell them at low prices. Or try in safe mode if you can get
it.How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.htmlYou can create a recovery disc or someone else use same version (to do the system restore
It only needs to be bootable).How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html------------------------------------------------
These require the correct Vista discs since you can not start safe mode.
Try the Startup Repair tool-
What are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlTry Repair Options recovery or a Windows 7 boot disk system
How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.html-----------------------------------------------
Here are a few Google searches where many have found different solutions:
Vista black screen - check that a 1st
http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10Vista black screen Solution
http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQIVista black screen Fix
http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI-----------------------------------------------
If necessary and you can access all ordinary Windows.
If nothing works, you can do a repair installation.
How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlHow to do a repair installation to repair Windows 7
http://www.SevenForums.com/tutorials/3413-repair-install.html---------------------------------------------------------------------------
Another method that works sometimes: at the command prompt, type of Vista startup disk:
(type in a single line or copy / paste a line at a time and then press enter - do not type)
parenthesis or "BOLD")c:
cd\
CD c:\Windows\System32\winevt (there is a space between cd and C :)
Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)RESTART Windows
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
Maybe you are looking for
-
Vertical black line on Portege 3500
My P3500 screen suddenly started showing a vertical black line with interference on the right hand third of the monitor. The line disappears after about 15 minutes, but still the interference. I plugged an external display that shows no display probl
-
How to install Windows XP Home on Satellite P500?
High @ all. I have a F1J P500 with Win7 preinstalled. The Point is that I have a lot of older material wich I want to continue to use. For example my printer. but every time I want to use my laptop goes down with a blue screen.So I decided to install
-
How can I save image transparent
I would like to save an image with transparency, but it shows a gray background. It looks like all the information of the image are lost when I rebuilt the image on the table (table IMAGE to image.vi). For more information, I have attached the vi. Th
-
Add LogFilter match string for the subject line of the e-mail notification
Hello On the LogFilter alerts, I add the matching string in the subject line of the e-mail logfilter alert notification. I followed KB 75058 for this requirement. But I'm getting other data also with the match string. Please find the attached screens
-
BlackBerry Smartphones BB restart automatically
My bb restart automatically. Sometimes, when I take pictures