I have imac G4 with Mac OS 10.3.9 and need to reload Firefox copmpatible.

Similar Questions

• I replaced 3.6 with 4.0 and it will not work on my mac OSX 19.4.11 and need to reload 3.6, if you please tell me how

  Your home says page version 4.0 is ready to download on my mac, indicating that it will work with my version (OS x 10.4.11). After loading, my computer asked me if I wanted to replace the new version with my computer, with a complicated language that I discovered meant that I had to stay with 3.6 and remove the addition of version 4.0. Well, I deleted the 3.6, added to version 4.0 and my computer now tells me that this version of Firefox is not compatible with my computer. Please tell me how I can recharge 3.6, have Firefox and enjoy again! Thank you, Tom

  Unfortunately, Firefox 4 supports only Mac OS X 10.5 or higher Intel processor. The system you are currently using is no longer supported by Firefox (details can be found here).
  
  
  You can revert to a previous version of Firefox by following these steps:

  1. Open the Applications folder.
  2. Drag the Firefox application to the trash.
  3. Download and install Firefox 3.6 from here.

• I have a license of cs6 ps for windows but I change with mac, can I disable win and activate for mac?

  I have a license of cs6 ps for windows but I change with mac, can I disable win and activate for mac?

  Please check: a product for another language or version of trading platform

• Scanning with Mac OS 10.6.1 and C4780

  All-

  I have a MacBook Pro with Mac OS 10.6.1 and just bought a HP Photosmart C4780.  I can print and copy documents very well.  The problem is when I try to scan documents.  If I use the button on the C4780 an error message is displayed.  If I use HP Photosmart Studio and use the scan key a scanner is not detected.  On the other hand, when I go to 'System Preferences' and 'Printer & Fax' the C4780 appears.  When I press the scan button, the scanner will work, but I am now using MacBook Pro software and the HP software not... any suggestions?

  I printed a wireless network Test report and any specified summary diagnosis was a 'PASS '.  In addition, I does not use a USB connection, but thanks to my wireless network.

  Bottom Line: I can scan documents using software MacBook Pro, but not the HP software.  Work of printer and copier.

  All-
  After posting this message I tried to update my computer and I received an update from HP.  After you install the update, all functions on my HP Photosmart C4780 work.
  Message edited by Triusaf on 09/16/2009 18:05

  If you are using Snow Leopard: If you have loaded the software from the CD for the printer HP and unless your CD says it supports in particular 10.6 Snow Leopard, you need to uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now run a software update.

  Then, remove and reinstall the printer in System Preferences, Print & Fax.

• I have a problem with the drag (cursor snap) video and audio stuttering!

  I have an emachine windows vista home edition and have caused problems with the drag (cursor snap) video and audio stuttering.  my hardware configuration includes an HP printer and a video camera from Microsoft with pregnant beyond the keyboard, monitor, and system speakers routine.  Are there updates or the settings that I can apply to correct this problem?

  http://www.eMachines.com/support/drivers.html

  The latest drivers/software for your machine come directly from eMachines.

  Click the link above for them.

  See you soon.

  Mick Murphy - Microsoft partner

• Overview of the LR5 does not. Just updated iMac 2010 with ssd, 32 GB of ram and El captain and all imports new previews are gray. The images are there, can work on them and then they appear in the preview. All records older still work fine just new downlo

  Overview of the LR5 does not. Just updated iMac 2010 with ssd, 32 GB of ram and El captain and all imports new previews are gray. The images are there, can work on them and then they appear in the preview. All records older still work fine just new download does not work. Help, please!

  Please try and delete preview Cache.

  It is located in the same folder as the catalog in Lightroom. The name of the cache an extract ends with Previews.LRDATA and should be deleted. Not to be confused with *. LRCAT, which should not be deleted

  Default location should folder of the image.

  Kind regards

  ~ Mohit

• My iMac OsX desktop computer had hard disk failure and needed replacement.  I lost much of my software, including all my Adobe CS6. Is it possible to download the software again if I have the serial number of June 2012?

  My iMac OsX desktop computer had hard disk failure and needed replacement.  I lost much of my software, including all my Adobe CS6. Is it possible to download the software again if I have the serial number of June 2012?

  Hi Roger

  Please follow: download Creative Suite 6 requests to re-download the software.

  Thank you

  Varun

• I have a problem with synchronize them between (summary) video and slides in IPADs, HTML5. Please, help me!

  I have a problem with synchronize them between (summary) video and slides in IPADs, HTML5. Please, help me!

  I have an idea, I think that what's happening is the fact that the video is not charged, it cannot find the video, he goes to the last downloaded part.

• How can Photoshop 6.0 compatible with Mac OS Mavericks or Yosemite and if so, I install it?

  How can Photoshop 6.0 compatible with Mac OS Mavericks or Yosemite and if so, I install it?

  If you mean Photoshop CS6, yes it is. Simply run the installation program.

  If you mean Photoshop 6, none that is too old. It was made for older PPC Macs. It will not install

  If you mean that Photoshop Elements 6, please see the forums of Photoshop Elements for advice on this.

  (Sometimes posters use 6 to designate everything above).

  Gene

• Problems with Mac OS 10.5.8 and HP 2355xi PSX

  My HP PSC 2355xi worked fine when I had a Windows PC.  Since obtaining the Macbook Pro, I've tried several times to download the printer drivers for Mac on the site of HP without good results.  I usually drop and uninstall.

  Yet once, I tried to download the printer driver to 2355 for my Mac OS from the HP website.  I've never been able complete the installation because the error of "trap monitor" lights up and installation closes.   I have all my updates installed Apple.  My printer will print and copy but it will not scan.  However, the real problems are the constant error messages.) Every ~ 45 seconds, I get the trap monitor error message and I have to click on one of the 3 choices to get rid of it.  I tried all 3 choices, nothing is done.

  'The monitor application trap HPIO close unexpectedly.  Mac OS and other applications are not affected.  Click on restart to start the application.  Click report to see more details or send a report to Apple. "Or I can click on ignore.

  I also have this error with less frequency.

  "An item in the folder Startup Items (Library/StartUpItems? HP IO) doesn't have the proper security settings.  Using this object can cause problems.  If you have confidence at that point fixed securitys settings, click on fix.  So always that this point be used, click on disable.  "Stop using this object and show this message again, click on decide later.

  I looked and did not have a Library/StartUpItems.  I tried to fix the last time I installed and it did not work.  I clicked on decide later on this installation, but I'm afraid to click on disable.

  It is not worth dealing with error messages ever minute or less in order to have this printer.  It's all just too old and not scan with a Mac OS?

  Trust me.

• I have a problem with the previous results of LEDs and indicators of compensation

  I'm working on a proper VI for my building project, but there is a problem... The project here is to define the occurrence of the error and the error type to decide what actions are required to protect the circuit. This isn't a problem here...

  The problem is when I run the VI for the first time... Everything is good and I got what I need... But when I run it after that... The new results to come out with the results of the first round... So my problem is with the previous results of LEDs and indicators of compensation

  Hope my question is clear and not confusing

  Well, show us a code instead. How do you call the VI?

  Have you tried the option: "properties of the VI... run... clear the flags when called?

• wet7xp_x86.exe fails with % 1 has encountered a problem and needs to close.

  I'm trying to run wet7xp_x86.exe to save my settings in XP. I downloaded the exe to the desktop and after a few seconds running accept terms screen is shown but then the error "% 1 has encountered a problem and needs to close" windows arrives? I am unable to get the wet program. Does anyone have a solution to this problem?

  have you downloaded the right version? 32 or 64 bit?

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=4503

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer

  First read the above link

• Help... I have Adobe cc with Lightroom installed on my macbook and iMac and photos on an external drive... but

  I edited several photos with lightroom and this external hard drive via my macbook pro. When I unplug my external drive and connect to my iMac and import a folder (no copy and move), none of my edits are here! or the sides. I can see all the photos of perfectly fine, but how do I get my cc in lightroom on my iMac to see my photos as they have been published on my instance mackook of cc in lightroom? They are certainly on the drive? I don't want to put this folder of images into space cloud that I have not the download speed or space provided. Any help appreciated.

  The changes are saved in the catalog, not for pictures.

  So to see the changes on both computers, you will need to keep the file containing the LR catalog and previews on the external hard drive.

  Use the Finder to copy this folder since the Macbook pro hard disk external. It is usually located inside the images folder or similar.

  Now make sure you always open the catalog from the external drive. To avoid confusion you can rename the catalog if you like, you then have to rename the folder seen accordingly. Make sure you do it with closed Lightroom. You can launch LR by double-clicking the file catalog.

• I have a problem with the new administrator creating accounts and the original missing on the computer account.

  Original title: profile has been automatically removed, new profiles created automatically and can not open a session

  Help! I closed my laptop (only in the ordinary course of its use) and when I turned it back on, my usual user profile was gone and a couple of new ones have been created. One was created with my professional e-mail address as username (which is strange because I've never used this e-mail in the computer) and the other is empty. I tried to connect both of the profiles using my old combinations of the new user name and password, or user name and the old Word, but it is said that the account and the password is incorrect. I also tried to log on as an administrator, but it says "your account has been disabled. See system administrator. Is it possible to recover the data in the old profile without reinstalling Windows because I am away from home and do not have the disc. ... I use Windows 7.

  Thank you very much in advance for any help!
  You might be able to solve your problem using the system restore. Here's how it works:
  1. keep tapping F8 during the first phase of startup.
  2. select Repair from the menu.
  3. Select an administrator account, and then enter its password.
  4. When you are prompted, select System Restore.
  5. set Windows to a point before this problem occurred.
  On questions of password-, I treat my PC as I have my house: I always have a spare admin account / SpareKey so that I can return new anything that happens. You have a fully tested alternative admin account? If you do not, and if the method above doesn't work, then, you have a major problem that you will not be able to resolve without a CD to repair Windows.

• I have a problem with the installation of the streets and trips 2009 on the computer.

  I buy a liscensed and legitimate copy (disk) of Microsofts streets and trips 2009 staples and have installed more than once on the same computer due to re-formatting and now the disc is damaged and I need to re - install again. How to do this without having to buy an another diskand liscense? Once again. I have a liscense and this copy has beenregistered with Microsoft.

  Original title: streets and Trips2009 download?

  Hi Craig,.

  I wish that you contact Streets and Trips for assistance.

  Check out the link-

  http://support.Microsoft.com/ph/1058

  You can also post your request in the forums of Streets & Trips.

  Check out the link-

  http://social.Microsoft.com/forums/is/streetsandtrips/threads

  Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.