I have improved my 5s to 9,32 now my text and ring tones do not work if my phone is locked.  Why?

I recently did the 9.3.2 upgrade on my 5.  Now when my screen is locked, I don't get all tone when I receive a text.  Also, I have a hit or miss with ringtones when the screen is locked.  If my phone is unlocked, I hear them both.  I tried to reset the text and ring tones, but it did not work. Is there anything else I need to do? Is this a bug?  Thank you!

Check the settings > do not disturb. If it is enabled, disable it.

Tags: iPhone

Similar Questions

  • I have an iphone 5 s. I switched from Verizon to the blank cell service, now I want to switch to cellular consumption. But the CC sim card will not work because the phone is "locked." What to do, who to contact without hose of my phone?

    How to unlock iphone 5s so that I can pass the cell phone service?

    Start by contacting AppleCare to determine the true state of the phone lock. No Verizon iPhone since the 4 was sold in a locked state. Thus, unless Virgin did something to the phone, he should be unblocked. Apple will be able to tell you if the phone is locked in fact and, if so, what kind of society.

  • My computer recently started to freeze .i have win 7 64 bit pc. Ctrl alt PIF and the mouse do not work either. In the sound registry mainly id 10005 and event 7001

    For the error with the id 7001.

    "The network list Service depends on the network location awareness service which failed to start because of the following error:

    The dependency service or group was able to start. »

    -
    -
    7001
    0
    2
    0
    0
    0 x 8080000000000000
    60397
    System
    BazilAChaudhry

    -
    Network list service
    Network location awareness
    % 1068

     
    For the error with the id 10005
     

    DCOM got error '1084' trying to start the ShellHWDetection service with arguments "" to start the server:

    {DD522ACC-F821-461A-A407-50B198B896DC}

    -
    -
    10005
    0
    2
    0
    0
    0 x 80000000000000
    60391
    System
    BazilAChaudhry

    -
    1084
    ShellHWDetection
    {DD522ACC-F821-461A-A407-50B198B896DC}

    Hello

    Were there any changes (hardware or software) to the computer before the show?

    Put the computer to boot and see if the problem persists.

    To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    Note: follow step 7 to reset the computer to start as usual after the boot process.

    http://support.Microsoft.com/kb/929135

    Hope this information helps.

  • The Remote option for matching seems to have disappeared (file/devices/Remote). This discovered after the last updated at 12.4 and Remote app would not work. Suggestions?

    The Remote for iPhone & Remote app matching option seems to have disappeared (file/devices/Remote). This discovered after the last updated at 12.4 and Remote app would not work. Suggestions?

    Fixed. I removed the Remote, reloaded app to my iPhone and then reinstated the info Apple ID and password in the app all connected immediately. The 'Remote' option is not always present under file/devices/Remote, but everything works well at this point.

  • Copy and paste shortcuts do not work. Have to use the mouse or go to the menus. Any suggestions? Copy and paste work fine in Safari

    Copy and paste shortcuts do not work. Have to use the mouse or go to the menus. Any suggestions? Copy and paste work fine in Safari edition

    I tried on two different machines of 10.7 and it seems to work for me on most sites, but there are certainly a few where it is broken. What extensions do you use? (Check the tools > Add-ons)

  • After software update today, my password does not work.  My phone is now disabled.  I don't have a backup.  How can I start to use my phone again and not lose all my content?

    After software update today, my password does not work.  My phone is now disabled.  I don't have a backup.  How can I start to use my phone again and not lose all my content?  Help, please.

    You can not

  • I'm stuck in reboot loop after trying to install one of the service packs, my cd rom is not working and I don't have a windows cd anyway, I tried to disable automatic reboot, but it does not work, I am running vista

    get service pack was not installed recovery changes and restart without end, once more I have no cd of windows and my rom is not working anyway, it really is _ me off, my computer was useless for days now and I have a very important job out there which is essential to my work. Thanks a lot for windows, I'll be switching os very soon

    Hi Asdlfjasdfjlasdf,

    How did you install ServicePack initially?

    You can try to start safe mode and try to perform a system restore.

    Step 1:

    For a safe boot, you can follow the below given steps:

    1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

    Click the Start button, click the arrow next to the button lock and then click on restart.

    2. do one of the following:

    a. If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

    b. If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

    3. in the display Advanced Startup Options, use the arrow keys to select the option of safe mode you want and press ENTER. For more information about the options, see startup options (including safe mode).

    4 log your computer with a user account with administrator rights.

    When your computer is in safe mode, you will see marked Safe Mode in the corners of the screen. To leave safe mode, restart your computer and let Windows start normally.

    If you are able to boot to the desktop in safe mode try doing a restore of the system at a point when the computer was working fine.

    For more information on Safe Mode, follow the link below:

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Step 2:

    To restore the operating system to an earlier point in time, follow these steps:

    1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

    If you are prompted for an administrator password or a confirmation, type your password or click on continue.

    2. in the System Restore dialog box, click on choose a different restore point and then click Next

    3. in the list of restore points, click a restore point created before you started having the problem, and then click Next

    4. click on finish

    Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

    For more information, please follow the below given link:

    How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

    http://support.Microsoft.com/kb/936212/

    After you perform a restore of the system try to boot into normal mode and then download the standalone vista service pack and try to install.

    How to obtain the latest Windows Vista service pack

    http://support.Microsoft.com/kb/935791

    Once it is finished downloading the pack of autonomous before installing the service pack disable security software, the system n clean boot, and then install the stand-alone pack. Once the installation is complete normal startup mode and re activate the security software.

    If you are not able to perform the above steps then you will need to take your computer to the technical workshop and get it rectified.

    The steps to perform a clean boot are given below:

    1 log on to the computer using an account with administrator rights

    2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

    If you are prompted for an administrator password or for confirmation, type your password, or click on continue

    3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

    4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

    Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

    Once you restart to try Office Outlook and see if you get the same error message. If not then follow the divide and conquer method mentioned in the article about which program is causing the problem.

    For more information about the clean boot, follow the below given link:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    When you have completed the installation of the service pack, follow these steps to reset the computer to start as usual:

    1. click on start, type msconfig.exe in the start search box and press ENTER.

    If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

    2. on the general tab, click the Normal startup option, and then click OK.

    3. When you are prompted to restart the computer, click on restart

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I have laptop HP Envy M6 Tx 1216 and brightness keys do not work.

    I have laptop HP Envy M6 Tx 1216 and brightness keys do not work.

    Hello

    Try to use Recovery Manager to reinstall your graphics driver of origin AMD - the procedure to use the Recovery Manager to reinstall the drivers and software is detailed in the document in question on the link below.

    Recovery Manager - Windows 8.

    Recovery Manager - Windows 7

    After reinstalling, restart the laptop.

    Kind regards

    DP - K

  • during the installation of Vista Service Pack 2, the computor has been disconnected. Now, I don't have an operating system and startup repair does not work. What should I do now?

    Computor was disconnected during the installation of Vista Service Pack 2. I did now no operating system and startup repair does not work. What should I do now?

    You may have to reinstall Vista from the original media or from the recovery partition according to the type of computer you have.

    Hope that you made the backup recommended all of your data before attempting to install Vista SP2.

  • I have 2 documents in the print queue of the printer and that they do not print

    I have 2 documents in the print queue of the printer and that they do not print.

    Hello

    Go through the following steps to delete 'deleted' printing of the print queue.

    (a) go to control panel

    (b) select system and Maintenance

    (c) select administrative tools

    (d) double click on Services

    (e) in the services list, scroll down until you find one called "print spooler".

    (f) make a right clic on "Print spooler" and "restart".

    (g) "suppression" of work will be lost and all work queued in your queue will print.

    This should help.

  • LG C500-G. AEE5GE1 with Windows 7 home prem OA MEA have been formatted. But despite giving the product key and Windows registry does not recognize the activation. Help, please

    LG C500-G. AEE5GE1 with Windows 7 home prem OA MEA have been formatted. But despite giving the product key and Windows registry does not recognize the activation. Help, please

    Name of the operating system Microsoft Windows 7 Home Premium

    Version 6.1.7601 Service Pack 1 Build 7601

    Manufacturer of operating system Microsoft Corporation

    System name HANDSOME-PC

    System manufacturer LG Electronics

    System model C500.-g. AEE5GE1

    System Type X 86-based PC

    Processor Intel (r) Core i3 CPU M 390 @ 2.67 GHz, 2666 Mhz, 2 Lossnay, 4 logical processors

    H46YSF00 Version/Date of BIOS American Megatrends Inc., July 2, 10

    Product key:

    X 16-96084

    CONCERNING

    TUESDAY BIOJY

    Have you tried to restart by phone?

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

  • I loaded windows 8 and have a dvd matshita bd - mlt uj23oas in a sony viao and it player will not work what I do

    I loaded windows 8 and have a dvd matshita bd - mlt uj23oas in a sony viao and it player will not work what I do

    Hello

    Check this location of registry for Upper and Lower filters...

    They will appear on the right after clicking on the location of Reg...

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4d36e965-e325-11ce-bfc1-08002be10318}

    Remove all entries found perhaps restore your disk, but can also cause something to stop working...

    Maybe you can identify the program causing the problem with the name of the filter and update...

    An example of this is iTunes... It uses a "GEAR" driver that can cause problems...

    Install the most recent usually solves the problem...

  • I need to reinstall Adobe Acrobat 9 standard on the net, I have a new laptop and the CD does not work

    I need to reinstall Adobe Acrobat 9 standard on the net, I have a new laptop and the CD does not work

    Copy the contents of the cd in a desktop directory.  install from this directory.

    or

    Available downloadable Setup files:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • When I got the test I deleted some things out of my computer to make sure that I had enough space. I deleted something and now photoshop or any other applications do not work. How can I solve this problem? Since then, I have now bought creative cloud

    When I got the test I deleted some things out of my computer to make sure that I had enough space. I deleted something and now photoshop or any other applications do not work. How can I solve this problem? Since then, I have now bought creative cloud

    Is there a message you get when you launch Photoshop? Please tell us which version OS are you using, try: https://helpx.adobe.com/photoshop/kb/photoshop-crash-with-faulty-module-photoshop-exe.html

  • I have reset firefox have now no menu bar and pressingf alt does not work

    I have reset firefox reported he turned slowly and had other problems at the start. Now, I have no menu bar and the alt button does nothing. Restored to the comp hoping that it can be useful but it did not. Any help would be appreciated.
    TIA.

    Hi, first try restarting Firefox. If this does not work Try Firefox Safe Mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

    If Firefox is open, you can restart Firefox Safe mode in the Help menu:

    • Click the menu button

      click Help

      then select restart with disabled modules.

    If Firefox does not work, you can start Firefox in Mode safe as follows:

    • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
    • On Mac: Hold the option key during the startup of Firefox.
    • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
      (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

    When the Firefox Safe Mode window appears, select "Start mode safe" - does NOT REFRESH!

    If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

    To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

    When find you what is causing your problems, please let us know. This might help others with the same problem.

Maybe you are looking for