I have installed 7.0.1. Everytime I open something like Gmail or Google Plus, it indicates the version of Firefox is obsolete and asked to upgrade to the new version. I uninstalled everything and started with a fresh install and still the same problem.

Similar Questions

• My bridge update 5.2.0.4 destroyed previews of all DNG files. They only appear on the side and small and I can't open Camera Raw in Bridge. Someone else has the same problem?

  I've updated Bridge yesterday. CS6 5.2.0.4. Mac OS 10.9.5

  All previews (DNG files) to the bridge now appear on the side and only small miniature size.

  Also Camera Raw has been disabled.

  I tried cache purge for folders as all purge the cache.

  I also spent over an hour on the phone with technical support that being mainly involved switched between departments and try to understand someone on the phone.

  Can anyone help?

  I'm going to guess at the root of your problem is "also Camera Raw has been disabled."

  Can you check what version of Camera Raw, or not at all? Here is how to validate: keeping up to date of Photoshop

• These entire servers have the same problem, the problem is that I can't install and uninstall anything on them. (Exception from HRESULT: 0 x 80070490)

  Not enough disk space (428 and 488 event id)

  I have 3 servers,

  Exchange 2010

  TMG 2010

  Member Server. (2008)

  These entire servers have the same problem, the problem is that I can't install and uninstall anything on it even window update patches cannot be installed on it. On the server exchange and Member roll and functionality cannot be opened and displays the error message. (Exception from HRESULT: 0 x 80070490)

  Appear in the event viewer for most event IDS are 428 and 488 (not enough space).

  I have enough space on each server, IE more than 40 GB of free space.

  Please answer me if there is no possible solution.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet forum
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• I have the same problem. whenever I start windows it tells me it is install and configure updates, after 20 minutes he finally - but next time I start exactly the same thing happens - that is every day and im tired of it.

  I have the same problem. whenever I boot windows vista it tells me it is install and configure updates, after 20 minutes he finally - but next time I start exactly the same thing happens - that is every day and im tired of it.

  Hi MartinWithWindowsIssues,

  Welcome to the Microsoft Vista answers Forum!

  I have some steps that may help you.

  Step 1

  Try resetting the component of windows update.

  To do this, click resolve this present in the link below. Click run in the file download dialog box and follow the steps described in the fix it Wizard.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Step 2

  Perform a scan of the file system [SFC] checker on the computer that will replace missing or corrupt files.

  To do this, follow the steps below:

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11. once the scan is finished, close the command prompt window, restart the computer and check.

  For more information, see the link below:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

  Hope the helps of information. Please post back and we do know.

  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• RE: Installed detachment "access denied." I have the same problem and none of the above worked. The property is empty, but demand will not accept me.

  RE: "access denied" following the installation of Firefox question. I have the same problem. Details below: I tried opening in Mode safe that has not worked. I have administrative access. When I click on the general tab in properties, I get a message that there is no such thing as "firefox.exe". This file, or any other type 'install' file appears in the directory Mozilla Firefox with the exception of 'uninstall '. I downloaded and tried to install seven times from six different sources, including Mozilla, all with the same results. I also tried a number of solutions on the web for this error without great success. I tried, first of all, to make an upgrade, then remove the old version of Firefox and have been 'install' since then. Avast, Malwarebytes and Threatfire found no malware.

  I've never had a similar problem with Firefox before and I used it for years. Anyone has any ideas that I have not already tried? I'm tired of using Internet Explorer! RE: Troubleshooting below - information Windown will not open the downloaded file.

  arwade said

  I downloaded Firefox on seven different sites

  Please download the full installer ONLY of Mozilla.org.
  Download Firefox full installation for all systems and languages {web link}

• >: everyone is having the same problem with all the days that I have now with the update on thursda after update, it could not be started "could not find xpcom" restored Dáil

  with the update of daily Thursday (Australia) after update owned couldn't boot received message "could not find xpcom.
  I then restored by day sauvegardΘ installed upgrading again every day would not restart with the same message
  I tried again on Saturday you have the same problem
  I'm now ignoring the update message that is very annoying because he wants me to update daily

  The bug in question should be solved with a daily update of today. However, I agree with the recommendation to go with 31.0 once it comes out next Tuesday, or at least to use the beta versions (once per cycle) as a compromise between stability and get the latest features and updates to the platform.

• Everytime I open a new window or refresh a getting started with firefox page opens with her. So, whenever I go to my homepage for example getting started with firefox opens along the coast in a separate tab.

  Everytime I open a new window or refresh a getting started with firefox page opens with her. So, whenever I go to my homepage for example getting started with firefox opens along the coast in a separate tab.

  This has happened

  Each time Firefox opened

  == I have this computer.

  You are welcome

• I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2572073)
  A security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2518864)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2633880)

  They all install properly but switches back to windows update to install. It's some kind of loop.

  Hi billy73,

  In addition, if you still have questions, please take a look at the thread similar here with a solution as possible.

  I hope this helps!

• my laptop will not configure adobe air, I've uninstalled and reinstalled and still have the same problem

  my laptop will not configure adobe air, I've uninstalled and reinstalled and still have the same problem

  Hi David,

  1. what exactly happens when you try to configure Adobe Air?

  2. you receive all of the error codes or error messages?

  If the installation of AIR was very good and you are facing problems with the configuration, you may need to contact Adobe support for further assistance.

  Adobe support

• I bought a desktop computer and wanted to know if I am able to have creative clouds on this plan as well as my laptop with the same problem, I'm currently?

  I bought a desktop computer and wanted to know if I am able to have creative clouds on this plan as well as my laptop with the same problem, I'm currently?

  Your subscription license allows you to have two facilities activated, so if both machines meets the system requirements so you should be able to install and connect the two.

• Each page is a zoomed out, and if I Zoom it, it is a normal size for a while, but when I close firefox and open it again, it has zoom out again, I have to zoom each page everytime I open a new page.

  Each page is a zoomed out, and if I Zoom it, it is a normal size for a while, but when I close firefox and open it again, it has zoom out again, I have to zoom each page everytime I open a new page.

  How to use Zoom?

  • https://support.Mozilla.com/en-us/KB/how-do-i-use-zoom

  The function Zoom of Page Firefox does a level of field by field to save favorite settings level users zoom, there is no default Page Zoom level setting in Firefox. Try these extensions:

  -> Default FullZoom Level 4.5

  • https://addons.Mozilla.org/en-us/Firefox/addon/6965

  -> NoSquint 2.1.2

  • https://addons.Mozilla.org/en-us/Firefox/addon/2592/

  Check and tell if its working.

• I'm having the same problem with updates do not install it. I'm under the edition family version 2002 service pack 3

  Some updates could not be installed

  Update for 2007 Microsoft Office System (KB960003) security
  Update of security for Microsoft Office 2007 (KB951550)
  Update of security for Microsoft Office System 2007 (KB969613)
  Update of security for Microsoft Office System 2007 (KB951944)
  Update of security for Microsoft Office System 2007 (KB954326)
  Update of security for Microsoft Office System 2007 (KB969679)

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Consultation problem Mac Photoshop Elements 11. Unable to open the program. He tells me that it is damaged. To remove the program and reinstall it from the app store. Again, I have install my purchases in the app store, and yet, I have the same problem. T

  Consultation problem Mac Photoshop Elements 11. Unable to open the program. He tells me that it is damaged. To remove the program and reinstall it from the app store. Again, I have install my purchases in the app store, and yet, I have the same problem. Thank you.

  I just wanted to make account - it seems that the problem has been resolved. After another remove & reinstall it is operational!

• I have a Macbook Pro. I upgraded 10.9.4 one downloaded the demo for creative cloud. It downloaded and installed, but does not open. I stopped and tried to reinstall. The same problem.

  I have a Macbook Pro. I upgraded 10.9.4 one downloaded the demo for creative cloud. It downloaded and installed, but does not open. I stopped and tried to reinstall. The same problem.

  Thank you.

  I came across the solution. In addition to download creative cloud, I needed to return to the site and download the trials for the programs I want to use - Photoshop and Lightroom. Once I did, I was in business. Save bad if this was done in light on the download site.

  Thank you

• Driver went on a pad and perform a system restore, the hardware is not installed but the same problem.

  I have Vista Home Basic. I have a HP printer that whenever I logged in re-installed drivers. So I decided to uninstall all printer and software and re-install fresh. All seemed well and good work but if I restart or stop and come back on the laptop tells me a driver went on a buffer and performs a restore of the system. The system restore seems to work and restores me awhile before I re-installed the printer. But again if I restart or stop it has the same problem. the pilot and buffer. I have not yet installed or reconnect the printer because it restored. I don't know much about computers and I don't know what to do. I wanted to kind of do a clean install of Vista but it comes preinstalled on my laptop so I don't have a disk and that I read removing the drivers does not seem an option.

  Hi ChristopherParvin,

  You did it happen any changes made to the computer before the show?

  Method 1: Try the following steps.
  a. log in your computer using an administrator account.
  b. Click Start and then click Run.
  (c) in the Open box, type regedit and then click OK.
  d. Locate and click the following registry key:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\LPTENUM5. Right click on the registry key and then click on remove.
  e. under confirm delete key, click Yes.
  f. close the registry editor and restart your computer.
  
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

  Method 2: I suggest to install the drivers of clean boot and then restart the computer and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

  Method 3:
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems