I have iphone and an ipad.  I need to synchronize the two and have at the same time on this new computer.  How do I do that?

Similar Questions

• I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not display in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not appear in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  You must save the spreadsheet containing the new date as a model format and use this custom template for each new spreadsheet where you want that this date format personalized at your disposal.

• Hi I have cs6 fit on my old mac pro book and I want to transfer it to my new. How do I do that?

  I bought the Cs6 costume in a store so I drive and serial number yet. I got it from 2011 in any case I bought the new mac book pro that has the retina display and I want to put all my old software on my new computer how do you go? Apple told me that I need to contact adobe in this respect that it is not their problem please help

  Hi Josey % 20jo123,

  Products Adobe cannot be transferred from one machine to the other, you will have to re - download the product, use this link to download Creative Suite 6 applications

  See also,

  How to download, install and activate Adobe applications

  Let us know if that helps.

• Why did my web page jump down and search for programs and files on my computer analysis at the same time? This happens on a regular basis.

  I ran scans for malware with malwarebytes and microsoft windows defender and all have developed negative. Also did a clean reinstall of the windows operating system. With the help of a new mouse that works fine on another computer. Am not touch anything on the keyboard when it arrives. It is really strange, when the web page I'm on (the fact on any web page) jumps down. When it happened, I reduced to a minimum the web page and notice that, down to left, research programs, and cursor files under windows 7 is quickly back and forth its own. When this behavior ceases web pages stay normal.

  "When it happened, I reduced to a minimum the web page and notice that, down to left, research programs, and cursor files under windows 7 is quickly back and forth its own. When this behavior ceases web pages stay normal. "

  What that looks like?

  Have you tried safe mode?
  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• With the help of Windows Easy Transfer - need to transfer the old HARD drive to new computer - old HDD attached as external drive for the new usb port of the computer - help

  New computer installed Windows 7 and gave me an option to use Windows easy transfer to transfer files, data, programs, etc. from my old computer.  All I have from the old computer's hard drive; a lightning strike fried either food or his mother by car.  I have attached the hard as a disk to the new computer using the usb cable provided with the external hard drive case.  It is recognized as drive E: on the new computer.

  Trying to follow the instructions given by the Windows Easy Transfer software.  Get the software/folder from the old hard drive (drive E), but trying to run the software that I can't seem to do anything on the old disk.  When asked what is the former or the new computer - I respond to old, but no new file is created for the transfer.  When I answer again, a new file is created on the new computer (rather than the old HDD) and then he transferred again to new.  I can't create a file of whatever it is I want to transfer from the old HDD.

  I can't use an easy transfer cable because the old computer does not only the hard drive.  I can't connect to a network for the same reason.  I only have the hard that I can attach to the new computer.  But I can't get the new computer to process the old hard drive separately for transfer purposes.  The only other option I can think of is to attach the old HDD to another computer, and then try to run the software in this way, but I don't want just the stuff on the old hard drive a copy to the other computer.

  Can anyone help?  Suggest how to get the old hard drive files, data, transferred etc. to the new computer.  What are the steps?

  Thank you.

  Do yourself a favor, with the old drive connected externally, in the browser, simply copy the data files to the location of Documents of the PC win7. You can not copy programs, they need to be reinstalled from media origonal. You can copy all the downloaded files instalation

  You may need to take possession of your old documents folders - see win help to find out how

• I need to install the products CC on a new computer, but it does not recognize my password even when I'm logged in

  I am a member of Adobe CC and need to install the CC on a new computer products. When I download CreativeCloudInstaller.dmg and double click to install, it takes my password but it doesn't recognize it even when I'm logged in. Anyone know what is happening?

  You use a Mac?  It might be the Mac you have to enter your system password.

• I use LR 5.7 on my MacBookPro w retina and cannot display the images in the display of the grid - only at the same time. This will make export painful and long.

  5.7 LR on a MacBookPro w retina using can't display the grid to open the imported photos I revised and improved. Can you tell me how to open it in the grid view?  I tried it in the drop-down list so that clicking on the icon in the grid view, does not.   Have been using LR for two years and this has never happened before.

  The grid view is not available or is the size of the thumbnails view set grid too large so only fits on the screen?

• Problems after you have copied images of Time Machine on new computer

  My old iMac died, so I purchased a new one.  I wasn't able to find a way to restore the images of time machine for the new iMac via the Time Machine application, so I ended up opening finder, open the .db on Time machine and copy my 700 GB of images through, preserving the folder structure.  I open LR, restored my last catalog backup and pointed to the pictures folder. Everything was great.  Until I tried to import images from my last photo shoot.  LR could not import.  Then I found I couldn't create a folder inside LR.  I discovered that changes/moves/adds/copies in the finder required me to type my admin password.  This only happens within the folder hierarchy, that I imported Time machine.  I spent an hour in the repair of Auth Apple here in Thailand and that they could not understand how to disable permissions inside this folder to a single image.

  When I click on the sign more, I'm already here as a read/write user is admin.  My name and admin are shaded out and cannot be changed

• Questions about serial port read and write at the same time

  Hi I create a user interface for the communication serial port, where there are essentially 2 front panels, where the user enters commands one and the other where the prints of UART is delivered. I thought initially using a state machine but the reading and writing may be independent sometimes and so I can't rely on States. I searched a bit on the forum and he left me even more confused. Help, please.

  (1) in a thread that sessions visa duplicated has been used for writing and reading at the same time, is it recommendable? How will this affect performance?

  (2) essentially when the vi is reading data are it must constantly view as well, however, someone said that it takes too much memory to use shift registers, so how do I go about this? If using a State in queue after the loop of reading it affects the playback loop and be sequential?

  In addition anyway is to move the cursor to the latest data from the indicator

  (3) for the control of the user input, assumes that the user has entered an order in the control and press ENTER, then writing visa is launched, but if it comes in another string and press enter then write must be called again... is - it possible? will detect the previous commands in the control of compensation?

  (4) according to my understand the expectation for the event do not monopolize resources and writing can go in parallel, am I right?

  Thank you. I have attached a very basic vi which took me to the point, but I want to make it more robust. Please help especially in the part of the user interface.

  su_a,

  (1) you can have only one session to a port. Several UART can handle full duplex so performance is not affected.  At flow rates of high data and large amounts of data, buffering and latencies of BONE can become a problem.

  (2) who told you that shift registers using too much memory? Shift registers are usually the best way to transfer data from one iteration to another. String concatenation inside a loop (registry to offset or not) causes the chain to develop and may require re-allocation of memory.  Your VI never clears the string so its cold length become very large.

  Generally, you do not have an active cursor on an indicator.  If you want to always display the most recently received characters and turn on the vertical scroll bar use a property node to keep scrolls to the bottom.  This can be annoying for users if they attempt to manually move the scroll bar and find that the program continues to move it back automatically.

  (3) if the user has changed the value in the chain of command, when he hits enter the modified value event fires.  Simply strike brace does not change the value and does not trigger the event.  Not control need to be erased, but the value that he has to change.  If you want to send the same command again, have a button send a command may be a better choice.

  (4) write is a case of the event.  It is not in parallel with anything.  The structure of the event do not monopolize resources.  The other loop will run while it waits.

  The event loop will not stop when you press the STOP button. Probably it wll take two command: change events of value after JUDGMENT before any loop stops.  Replace the Timeout event (which never expires) with a STOP: value change event and a real wire of this judgment to the Terminal endpoint.  Remove the local variable.  Make mechanical locking when released.

  Lynn

• Sound is comin from the speaker and headphones at the same time. How to solve this problem?

  Hello! I installed win7 professional and upgrade to ultimate and when I play a music or vdo sound is coming from the speaker and the headphones. I have a 3ghertz Pentium 4 with 1 GB of ram, and it runs the 32-bit version. And also the headphone option is not present in the peripheral reading option.
  Can any1 please please help me?

  We consider that your machine uses Realtek HD audio-
  (Older versions of Realtek HD audio drivers may have a slightly different form, but the)
  basics should be the same).

  There are two ways to set up the helmet when it is plugged into the façade decision-making;
  (1) in Realtek Manager of her go to Advanced Settings feature in the upper right of the window.
  Check the circle next to cut... plugged back.
  When this fact was you must also click on the yellow folder icon below the
  Device settings advanced and check 'Disable protection of jack façade' is clear.
  -Of the drawbacks of this method are that you do not get an option of separate settings for headphones.
  then they use the same environment as your speakers and EQUALIZER settings, but you can use both the
  speakers and the headphones if you wish.
  -Note that with this option, the helmet does not show in Sound Manager window.

  (2) advanced settings in the sound Manager go to Realtek device.
  The check box next to do advance... at the same time.
  This will disable the speakers when headphone is plugged in the socket of the façade,
  and return to the speakers when headphones are disconnected.
  Also check one or more of the boxes below, according to your need.

  -With this setting, there is an option for headphones in the two Windows Sound manager
  and Realtek HD Audio Manager.
  -With this setting, it does not matter which option to use in yellow folder as the setting icon
  is ' either / or '. You cannot run at the same time the speakers and headphones.

  -Note that with games the headset must be connected prior to spear the game, or
  the default set to the speakers.

• Bluetooth and audio of the speaker at the same time

  I run vacation watch I want to be able to provide an audio feature on both an FM transmitter connected to the headphone jack AND Bluetooth speaker at the same time. This way people walking as well as those in their car would be able to hear the music. As it is, I have a system that works, but not both at the same time. With the level of technology that is in the computers in the House these days, that shouldn't be too difficult to configure the software to allow the two outputs. Is it possible to make this work?

  Hello Gerald,

  Please contact Microsoft Community.

  From the description of the question, we understand that you want to provide audio on the two FM transmitter plugged into the headphone jack and speaker Bluetooth at the same time. But unfortunately, we wish to inform you that it is not possible to obtain a taken audio headphone and speaker Bluetooth at the same time. As you mentioned in your post, you would be able to get the audio out through headphone or Bluetooth speaker both. You can check the Web to see if there is any third-party program that can support technology of dual audio output.

  Important: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  The above information was hoping to get useful, please return it to us if you need additional assistance.

• Satellite M30X-122: how to use the headphones and speaker at the same time?

  Hello

  y at - it a possiblity to use headphones and speaker at the same time?
  When I plug the headphones into the Jack, the speaker is created off the coast of the moment.

  Thank you
  Peter

  Hi Peter,.

  There is unfortunately no way to use both headphones and speakers at the same time. This is because tghere's a disconnection physical power for the internal speakers when you plug in the headphones. It is not by software. The only way around this would be to dismantle the headphones Jack and solder connections that are broken when you insert the headphone permanently.

  Kind regards

• Use NI ELVIS II Oscilloscope and Agilent Oscilloscope at the same time

  Hello

  I designed a circuit in the 3D NI ELVIS of Multisim view and I want to use the oscilloscope NI ELVIS II and Algilent oscilloscope show students how to work with the two oscilloscope but the problem is when I use both of them not of them works. Judgment of NI ELVIS II Oscilloscope running and the other a desnt show nothing but as soon as I delete the Agilent one OR ELVIS II Oscilloscope starts showing traces. I would like to know is possible to implement both at the same time

  On my computer the two instruments work, but very slow

  Here's a tip: disable ELVISmx instruments that you do not use (each active instrument consumes resources systems):

  • Stop the simulation.
  • Go in simulate > parameters of Simulation NI ELVIS.
  • Uncheck the instruments that you do not use.
  • Click OK.

  When an ELVISmx instrument is disabled, a small red 'X' appears next to the upper right of the icon of the instrument on the schema.

  Let me know how it works.

• I use a headset bluetooth with my iPad, but have only a charger and there are times where I need to recharge both at the same time. What can I do?

  I need to recharge the headset/Bluetooth headset and iPad at the same time. Do only one charger with a USB port. Apple supports a multipart charger?

  Why you don't want to buy a second charger? Each unit came with a charger?

• My wife and I have iPhone 5 s, the two rings at the same time while we are at home when one of us Gets a call. They are on the same account, is there a way to stop this without establishing separate accounts?

  My wife and I have iPhone 5 s, the two rings at the same time while we are at home when one of us Gets a call. They are on the same account, is there a way to stop this without establishing separate accounts?

  settings - phone - call another device - off.

  One of you should get their own apple ID, you just go to have problems later.