I have just updated to windows 8 and I hate it. How to return windows 7?

Similar Questions

• I have just updated to Windows 7 and when I try to run a backup they fail.

  I have just updated to Windows 7 and when I try to run a backup they fail.  It seems that whenever a program tries to update the external HARD disk where backups reside it requires administrator permissions.

  Looking at the options Microsoft suggest that their user account control system is not supported by my version of SyncToy. What can I do? I'm looged administrator

  As you have installed SyncToy until you have created the required permissions, uninstall SyncToy, reboot, then reinstall SyncToy.

• I have just updated to Windows Media Player 11. I have a .avi file that only plays sound with no video.

  Media Player

  I have just updated to Windows Media Player 11. I have a .avi file that only plays sound with no video. I'll see a message asking me to information center to display information about the file being played. Thank you

  Download codecs here: -.
  http://www.DivX.com/en/software/DivX-plus/Codec-Pack

  Otherwise, you can download and install VLC: -.
  http://www.videolan.org/VLC/download-Windows.html

• I have just updated to windows 10 and I have no sound, everything else works fine

  I have no Audio, sounds or volume afte the update/upgrade of Windows 10. This is NOT the case yesterday when I don't have Windows 10 update/upgrade in my laptop Vaio from Sony. Everything works very well, is to take a mouse of logitech usb among other things. My Audio jack does not work for headphones will not do. I found an old usb headseat PS3 seems to work, according to this logic, a set of usb speakers would do the same thing. If you have a HD cable you can connect your laptop to an HDTV and use the TV speakers. What can I do to solve my audio problem?

  Go to control panel > system and security > system and to the left, click on advanced system settings. Once there, go to the Advanced tab, and under performance, click settings. Then, click on the Advanced tab, and under virtual memory, click on change. Now, I did uncheck automatically manage it paging file for all readers size and check again, but if this does not work I heard uncheck automatically manage paging file for all readers size and selecting size made on order and set the initial size and maximum size to 3072 should solve the problem. I hope this helps!

• Firefox does not open now - I have just updated my privacy settings and erased cookies - what's past?

  I changed the privacy settings on the preferences of Firefox, including clearing cookies, history and cache, and now Firefox will not open. He said he had to restart after a privacy changes, but it does not and will not be opened by the icon in the dock or through the applications. What happened, and how can I fix the problem to begin to use Firefox again? Thank you.

  Hello

  Try to start safe mode:

  • Firefox in safe mode

  Also see this article:

  • Firefox does not work - fixed Common to restart you

• just updated to Windows 10, Photoshop cc 2015 will not open.the message says MSVCP110.dll missing

  I have just updated to Windows 10, Photoshop cc 2015 will not open.the message says MSVCP110.dll missing

  Just fixed this problem for me:

  Open the file/Program files (x 86).

  Search: vcredist_x64.exe

  3 results popped up for me. I ran all three and it fixed the problem for me. Hope this works for you as well.

• I have just updated an Alcatel one touch fire to version 1.3 (firefox OS) and the market no longer charge

  I have just updated an Alcatel one touch fire to version 1.3 (firefox OS). Rigth after installation completed and restart, the market App has not loaded at all. He showed only a blank page and the exit button (x) that have nothing. I also tried to access market from the pre-installed browser (firefox), but the result was the same.
  E-mail has failed also. A message that a secure connection to the server imap.googlemail.com was not possible and that the certificate is not valid, appeared (something like that because it's in Greek). How can I fix these problems? If not, how I can return to the previous version (1.2) rll?

  Hello, can you check that your clock system, the date and time are always well positioned?

• Noticed on my desk that there is an unknown name and it has a password. I don't know who he is. This is my computer at home. I have just upgraded to Windows 7 pro.

  Noticed on my desk that there is an unknown name and it has a password. I don't know who he is.  This is my computer at home. I have just upgraded to Windows 7 pro.  How can I get rid of this name or why it is there?

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/what-is-the-sacnetdriveuser01-account/06dce3b0-075a-484A-846C-f38820bccbdc?msgId=1fa00f4e-75d0-44bd-B25C-44de55241b38

• Just updated to Windows 10 & can't get images to open in LR 6.  What can I do?  Should I uninstall and reinstall?

  Just updated for Windows 10 & LR6 continues to turn the circle "I work", never download thumbnails of the pictures on my sd card.  Should I uninstall/reinstall the program, or what?

  Hello

  Could you make sure that you use the latest version of Lightroom (check from help > updates)

  Please uncheck "Use processor graphics" under Preferences > Performance

  Then, restart Lightroom and try again

  

  If that didn't help, copy the card on the desktop images in Explorer/Finder

  Then import these desktop images in Lightroom

  Let us know if this helps

  Concerning

  Assani

• Have just bought a new iMac and imported all my old data.  When I try to open a pages document it says that it cannot be opened because it is too old, and that to open it, I have to save it with Pages ' 09 first.  So, how he back up if I can't open it?

  Have just bought a new iMac and imported all my old data.  When I try to open a pages document it says that it cannot be opened because it is too old, and that to open it, I have to save it with Pages ' 09 first.  So, how he back up if I can't open it?

  Start the OS X App Store, then click on the item toolbar updates. V5.6.1 pages should be available, and this will open documents Pages ' 09, ' 08 and ' 06. In messages to this community, you should always share what version specific pages and OS X that you are currently using.

• Can I use the Vista license that I have just upgraded to windows 7 Upgrade a computer is currently using XP?

  Can I use the Vista license that I have just upgraded to windows 7 Upgrade a computer is currently using XP?

  Can I use the Vista license that I have just upgraded to windows 7 Upgrade a computer is currently using XP?

  Lol when you upgrade you send upwards with a license, not two. The license of Vista is subsumed in Windows 7 one and can no longer be used. This is the reason for which an upgrade is cheaper than licensed full.

• I have 10 updates to windows that will not be installed if you please help me with vista

  I have 10 updates to windows that don't will install tried everything.  The fixit man says it fixed, but I can not install.  This has happened for months.  I also downloaded packs 1 and 2.  I NEED HELP BADLY. Thank you

  Hello. Stevenantinori,

  Start > all programs > Windows Update

  Click view update history

  Under Search Status Failed

  Click twice on this list

  Details of the error lists error Code #.

  You can click on the link "Get help with this error" for more information.

  When noting these error Code #, please post back each error code # and KB # it relates to.

  Restart Windows Update after each method below

  Method 1)

  In the meantime, download and run the system update readiness tool

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-system-update-readiness-tool

  Restart Windows Update

  Method 2)

  Run the System File Checker tool

  Right-click on command prompt and select run as administrator

  Type the following command:

  SFC/scannow

  Press enter

  Note: There is a space between SFC and / scannow

  When the scan is complete, restart Windows Update

  Method 3)

  Reset the contents of the Catroot2 folder

  Opened in administrative Mode command prompt window

  Type the following command

  net stop cryptsvc

  Press enter

  MD %systemroot%\system32\catroot2.old

  Press enter

  xcopy %systemroot%\system32\catroot2.old /s %systemroot%\system32\catroot2
  Press enter

  Delete all the contents of the Catroot2 folder

  Type

  net start cryptsvc

  Press enter

  Retry Wndows Update

  Method 4)

  Delete incorrect registry values that may exist

  1. Click Start, in the search box, type regedit

  2. in the list programs, click on regedit.exe

  3. Locate and click the following registry subkey

  HKEY_LOCAL_MACHINE\COMPONENTS

  4. right click on the COMPONENTS

  5. click on export

  6. in the bvox of file name, type COMPONENTS

  7. in the save box, click Desktop, and then click on save to save the file to your desktop

  8. in the Details pane, right-click PendingXmlIdentifier right-click and then click on remove. If the value does not exist, proceed to the next step

  9. in the Details pane, right-click on NextQueueEntryIndex and then click on remove. If the value does not exist, proceed to the next step

  10. in the Details pane, right-click on AdvancedInstallersNeedResolving and then click on remove. If the value does not exist, continue to the next step.

  11. restart the computer

  12. try to install the updates again.

  Method 5)

  Save the Windows Update files

  Command prompt opened with administrator privileges

  Type the following command and press ENTER after each entry

  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S

  New attempt to update windows

  I hope this helps.

• A hard... I just updated my desktop PC and reloaded Lr 6

  A hard... I just updated my desktop PC and reloaded Lr 6, I've been using (and backup) on my old drive for several months (Sept. 15).  After wearing all my files across to the new drive before loading Lr 6 I was surprised when the Prog prompted me to upgrade my Lightroom Catalog 5 catalog at 6, I had assumed that he would have discovered my files catalog 6 already created?  Secondly, and probably related, she forced me to re import these images in Lr 6?  Can someone shed some light on these challenges please.  Bravo, Simon.

  Hi Simon,.

  6 Lightroom detects that the catalog already in use previously installed version of Lightroom. If you know where your catalog Lightroom 6, follow these steps: -.

  • Open Lightroom
  • Select file > open catalog
  • Are looking for, then choose your catalog Lightroom 6.
  • Select open

  Let us know if this helps

  Kind regards

  Assani

• I have just updated to Lightroom 4 to 6. My photos of 2015 disappeared.

  I have just updated to Lightroom 4 to 6. My photos of 2015 disappeared. Any help would be great

  Hi graemes,.

  Could if it you please let me know which operating system you are working on?

  As the catalog shows completely empty?

  Or is there an exclamation point on the images in the catalog?

  And please try to improve the catalog once more Lightroom 6.

  Kind regards

  Tanuj

• I just updated my Apple TV and now my music does not

  I just updated my Apple TV and now my music won't work - white screen - everything seems OK?  YES restarted. Power Cycle YES.  Any ideas?

  Works fine on my system. Try to connect to and on your iTunes account.