I have no his system, not of his game, no sound CD. All things audio work fine in device mgr. Nothing is cut. No problem with the sound card.

Similar Questions

• Windows 7 and I have a batch file to copy files from 1 computer to another. It works fine alone, but when I put it to run in the Task Scheduler it shows it ends successfully, but nothing is happening

  I am running Windows 7 and I have a batch file to copy files from 1 computer to another.  It works fine alone, but when I put it to run in the Task Scheduler it shows it ends successfully, but nothing is happening.  None of the files are copied, and the control box does not appear.  Any ideas?

  Run a batch file in Task Scheduler

  Hello ITGIRL17,

  Thanks for posting on the Microsoft answers Forum.

  Configure your task under your administrator account.
  Then go to the folder with the batch file and ADD on control for the folder administrator permissions and each of the files in batches.
  If the batch files write data, then the target for the task should ALSO have all explicit permissions.
  Now try to run the Task Scheduler task.

  Also check the information from the following link and look specifically at Brian Vandemark Sommaire steps on 2 September.
  http://social.technet.Microsoft.com/forums/en/winservermanager/thread/d47d116e-10b9-44f0-9a30-7406c86c2fbe

  I hope that this information will help resolve your batch file does not problem.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• When I try to establish a wifi connection, it shows that the problem with the network card is not fixed. How can I solve this problem?

  When I try to establish a wifi connection, it shows that the problem with the network card is not fixed. How can I solve this problem?

  Hello

  Thank you for writing to Microsoft Communities.

  Until we start troubleshooting on this issue please provides us additional information by answering a few questions, this will help us better solutions to the problems.

  1. What is the full error message do you get?

  2. are - that you be able to access or connect to the Internet via wired?

  3 have there been recent changes to the computer before the show?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1:
  Try to run the network troubleshooters. Check if it enumerates and helps resolve the errors.
  http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters

  Method 2: If the problem persists, try to follow the steps from the link.

  In the Windows wireless network connection problems:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check this link for more information:

  How can I troubleshoot network card? http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Please follow these recommended steps and post if you still experience the problem.

• Have problems with the graphics card in laptop Amilo pa 1510 when you use the Windows 7 operating system

  Original title: ATI display driver my supposed UN stops and restoring it automatically when it Enmodepleinecran screen mode, why?

  When he restores it does in normal screen mode frozen, exit full screen running in background.

  What can be done to prevent this. I updated the driver software, but it had no effect

  So, what is the make and model PC?

• My Satellite A100 does not support SDHC cards with the internal card reader

  Hello

  My Satellite A100 can't stand my sandisk 4 GB SDHC.
  'normal' SD cards are not a problem with the internal card reader, and there is no problem with the 4 GB sandisk SDHC card using an external card reader.

  is there a software solution?

  regrads,
  Itock

  I don't have the time to read the manuals for your model of laptop users, but can be registered to all supported cards. I guess SDHC not registered and not supported.

  I don't know what you mean with the software solution, but as far as I know, update for multimedia card reader is not available.

• Wiped a computer due to problems with the operating system, but do not have any media to reinstall. Help.

  No operating system

  Hello

  I bought a second hand computer and there is no backup of the operating system CD. He had problems with the operating system start so I wiped it, but now I have to re - install.

  Would it not possible to obtain another copy of the operating system for that computer?

  All the best

  Dean

  Hello

  These are forums for Vista, so vista information is provided

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• I ran CHKDSK, the report tells me I have problems with the file system, usn journal. ___

  I ran CHKDSK, the report tells me that I have problems with the sys file. I ran CHKDSK/F, it is said it fixed the problem but I ran CHKDSK again and it shows that the same listed the issues.

  Describe how you run chkdsk.

  That is what the report said: you have problems with the sys file?

  CHKDSK examines the disk space and use of the disk for the table of allocation of files (FAT) and NTFS file systems. CHKDSK provides information specific to each file system in a situation report. The report shows the errors found in the file system. If you run chkdsk without the /f on an active partition command line option, it can report errors because it cannot lock the drive. You should use chkdsk occasionally on each disk to check for errors.

  If you run chkdsk from a command prompt while Windows is running, it can report errors or it may not report errors - and it may report different
  Errors each time you run.  If this is the case, it could just be the way you run chkdsk.

  Here's how Microsoft explains this observation:

  "... CHKDSK may report that the disc is damaged, even when there is no
  current real corruption. This can happen if NTFS happens to modify
  areas of the disc on behalf of some programme activities that CHKDSK is
  review at the same time. To check a volume correctly, the volume
  must be in a static state, and the only way to ensure that the State is
  to lock the volume. CHKDSK only locks the volume when /F or/r (which
  involves the 'F') is specified. For example, you may need to run CHKDSK more than
  time so that it can complete all the steps in read-only mode. »

  If you run chkdsk from a command prompt, you are not the necessary static state and you can encounter errors "when no real corruption is present. This is how it works when you use this way.  Any changes made to a NTFS file system modifies the USN Journal.  If you are not in a static state, your USN change Journal probably all the time, so what you see (says something like that) can be quite normal.

  Two ways to ensure that you are in a static state is to run chkdsk from the Recovery Console or to schedule a chkdsk to run the next time that the system
  Restart by answering Yes to the question:

  Would you want to check this volume to be the next time the system restarts?

  If chkdsk reports errors when running in a static state, the errors should be investigated, resolved or explained.  This may take several
  chkdsk runs all of the issues and some problems cannot be resolved by chkdsk.

  If chkdsk runs the next time the system is restarted, the activity and the result will be displayed in the application event log.  Look in the Application log for
  Winlogon events and a source have the date and the duration nearby time chkdsk.

  It is in fact a chkdsk additional reading if you want to learn about it and it will explain everything you see and why your expectations exceed reality.

  Please vote my posts as helpful so I can get a lot of points. I'm saving for a pony!

• Software for printing device Kodak esp7250 does not load as areas appear gray and Kodak said that it is a problem with the operating system 7

  I have problems trying to reinstall my printer software Kodak esp 7250.  The area where you register the software is empty and the Browse button to choose a place is gray, so it will not go any further because if you then choose then says invalid path.  Of course, it's an invalid path because it will not choose an or allow me to choose one.  I contacted Kodak and after working with it for a while, they said it's a problem with the operating system.  I have Windows 7 on a laptop Gateway.  I need my printer and get very frustrated because nobody seems to know how to solve this problem.  I was able to use it when I got to the laptop, but suddenly one day it wouldn't work.  Help, please.

  Hello

  Thank you for your response.

  Make the SFC scan and check the status of the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I would also advise you to check the status of the issue in a new user account.

  Create a user account:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If it works in a new user account, then you will need to fix the corrupted user profile. You can visit this link for the steps:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps!

• Hi, I have a problem with the import of the 4000 SJCAM MOV files. MOV files are in formats supported for Adobe Premiere elements 11. But if I am importing of MOV file, only audio part is imported, part video is not imported. How can I solve this problem?

  Hi, I have a problem with the import of the 4000 SJCAM MOV files. MOV files are in formats supported for Adobe Premiere elements 11. But if I am importing of MOV file, only audio part is imported, part video is not imported. How can I solve this problem?

  haben

  Looking at the specs of your camera (SJCam 4000), we already know what video compression your camera uses. It is H.264.

  A H.264.mov file should be accompanied by a first elements 11. On what computer operating system is your first items 11 running?

  You have the latest version of QuickTime installed on your computer? And, you use QuickTime and first of 11 elements of a

  Account user with administrative privileges? Please go to Premiere elements 11 publish + share/computer/QuickTime to confirm that you will find

  presets it to the choice of QuickTime, it.

  What are the properties of these files H.264.mov - is it 1080 p (1920 x 1080 p 30) 30 or something else? Do you know if this device is registering with a variable or

  a constant rate?

  Please check and review and then we'll decide what next.

  Thank you.

  RTA

• I have a mac book pro 2009 model, now when I try to load it, there is no green light on the adapter and the laptop does not charge. Not sure if there is a problem with the card or the battery or the laptop. Kindly help

  I have a Mac book pro 2009 model, when I try to load it it not there no green light on the adapter and he is in charge. Not sure if there is a problem with the adapter or the battery or the laptop. Kindly help... Thank you

  Have you tried:

  Portable Apple computers: Troubleshooting MagSafe adapters - Apple Support

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  What Mac? (details)

• OSX 10.11.2 on end of 2008 with the graphic card Nvidea Quadr 4000 MacPro is unable to open the Nvidea driver manager in System Preferences, CUDA work and updates. Any suggestions? Have tried to install updtyer Combi for OSX.

  OSX 10.11.2 on end of 2008 with the graphic card Nvidea Quadro 4000 MacPro is unable to open the Nvidea driver manager in System Preferences, CUDA work and updates. Any suggestions? Have tried to install Combi updater for OS x, the problem persists.

  If I remember someone else reported the same problem yesterday and Nvidia suggested to reinstall OS x. If yo boot into Recovery and reinstall without formatting nothing should be lost but backup before just I case.

• I HAVE COMPAQ MINI 110 HAVE A PROBLEM WITH THE PASSWORD OF PIOS. SYSTEM HAULT CODE IS; CNU9243TDY

  I HAVE COMPAQ MINI 110 HAVE A PROBLEM WITH THE PASSWORD OF PIOS.

  SYSTEM HAULT CODE IS; CNU9243TDY

  ways to help

  Hello

  Try to enter: e9lo7vfati (3rd character is a lowercase L)

  Kind regards

  DP - K

• I have a problem with the HP Deskjet2545 do not print on the computer.

  Printer does not print. Computer says "printer error". Convenience store said that the problem is resolved. The printer is 'ready' doesnot even impression. What is the solution?

  Original title: hpDeskjet2545.

  Hi Matt,

  Thanks for posting your query in the Microsoft Community.

  Printers to print documents, photos, cards and calendars. You have a problem with the printer doesn't work is not on the computer. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) what is the exact error message?

  (2) have you tried the troubleshooting steps?

  (3) what is the version of Windows installed on the computer?

  (4) have you made changes on the computer before the show?

  I would like more information about the issue.

  Note: assuming that you are running Windows 7, I would like to suggest some troubleshooting steps.

  Method 1-

  I would have you look at the article-

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2-

  I wish that you uninstall and reinstall the printer.

  See the article-

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Method 3-

  I would have you go through the troubleshooting proposed by HP guide.

  Check out the link-

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&LC=en&DLC=en&cc=us&product=3571292

  Let us know if you need assistance regarding the issue. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.

• Have a problem with the Windows XP where he did not finish the boot.

  Have a problem with the Windows XP where he did not finish the boot. Ran remote console and @ the c: > guest tried to run chkdsk/r/p and received the error message "invaild drive. I put the drive in the argument?

  Hello Tmagic,

  Thank you for your message.  The correct format is below:
  chkdsk volume: (switches, e.g./r/p)
  
  
  example: chkdsk c: /r /p
  
  
  If these results find but cannot fix all the mistakes, you can also check with the manufacturer of your drive and possibly download a utility that will check the errors and repairs.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.