I have no program for the sound in my computer what recommended you

Similar Questions

• Deleted his bus from Add/Remove programs by mistake please help me get the sound on my computer. Thank you.

  Deleted his bus from Add/Remove programs by mistake please help me get the sound on my computer. I had downloaded new software I wanted to delete and that which the sound bus (I think that's what it was called was another program added with this software, it is a blue icon) I feel stupid, but really would like help getting the sound back on my computer. I have Windows XP Professional. Thank you.

  Hi Rhonda327,

  Check if an error code is listed in the Device Manager:

  a. Click Start, click Run and then type devmgmt.msc

  b. expand sound, video and game controllers

  c. double-click the sub element

  1. run the system restore. Restore the system to the date when it was working fine. You can check the link for the steps below: how to restore Windows XP to a previous state: http://support.microsoft.com/kb/306084

  2. you can also run the patch from the link below: diagnose and automatically repair audio playback problems:http://support.microsoft.com/mats/no_sound/en-us

  Check out the links that gives you information about the installation of drivers from the manufacturer's Web site and also not to know the manufacturer or the supplier of the device below.

  Link:

  How to update a sound card driver in Windows Vista and Windows XP:http://support.microsoft.com/kb/166774

  Add the above suggestions, you can alos use windows update to install the drivers for the device. Link, please refer to:http://www.microsoft.com/windows/downloads/windowsupdate/learn/windowsxp.mspx

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• My speakers have no sound - only a hiss and static. Have tried everything, even the new speakers. Suggestions? Thank you!

  I tried 3 pairs of speakers front, rear, type usb, plug type.  Initially, it stopped working, then computer has crashed, I had fixed it, now always the speakers out no sound - whistle just let me know that they are connected.  The computer says that they are working correctly, however they do not have.   I did in December sync my new Kindle but that is the only change to the computer.  Any suggestions?  The repairman will come back next week but in the meantime I would like sound.  It will not play music - either from Pandora or CD computer.  Thank you!!

  [Moved from comments]

  Phonetic, you experience a card number.  I don't know how helpful this will be but have tried to reinstall the sound card drivers?  What kind of sound card do you have?  Have you tried the speakers with other computers?  What kind of computer do you have?  What version of windows is running?

  I hope this helps a little.

• Do I need another new Windows Update to activate my Windows Vista to access the free secure recommended downloadable program for downloading various files and any other information you want?

  Original title: I need an another new Windows Update to activate my Windows Vista to access the downloadable recommended secure free program for downloading various files and any other information you want? Thank you! Randle

  Please help if you have the time giving me the name of a free secure downloadable software that works for Windows Vista, when the word is not on my PC for

  downloadind attached to power open, save, display, print and other means that this downloadable can help. I would be very grateful for your help! I works but not Word and PowerPoint if you have any suggestions that will be very solve my delimma of not be able to successfully download these things I just Gillies

  Your expert advice, patience, attention to my request, time, are all valuable and appreciated! Thanks again and have a wonderful day! Randle

  Hello Randle,

  You can use your favorite search engine & download any third-party software that might be used to.

  
  Note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there.

  Hope the helps of information.

• Does anyone have a solution for the use of Bible Illustrator 3.0 MS8 and MS7

  Original title: program programs Application Applications compatibility.

  Does anyone have a solution for the use of Bible Illustrator 3.0 MS8 and MS7

  What are the requirements of system for this program?

  What version of Windows it says on the package, it was designed for?

  If its designed for an earlier version of Windows such as Windows 95 or Windows 98 or XP, then it is probably incompatible with Windows 8.

  If the product packaging indicates anything in the 1990s OR early 2000s, I am afraid that this is not something that is guaranteed to work with Windows 8.

  You can try the following average time.

  Point to the installation files where they are.

  Right-click on the configuration file, and then click "troubleshoot compatibility".

  Wait, it detects the problem.

  Click on the option "worked in an earlier version of Windows.

  Select Windows 7 RTM or better Windows Vista SP2

  Click next

  Click Start the program, wait, it installs

  When the installation is complete, click Finish and save the settings.

• The OFA error: you have enough privileges for the operation. Please contact your system administrator. (Hello world does not)

  Hello

  My business that we are upgrading to R12.2.5. I downloaded the latest patch from metalink jdeveloper and trying to configure jdeveloper. When I ran Hello World program I get an error of "you have enough privileges for the operation." "Please contact your system administrator."

  I have facility for all the configs needed in the project but still is the same.

  
  When I fell on the debug mode. I got the same error with the missing config file.

  Please check below the debug message:

  November 4, 2015 16:47 oracle.adf.share.config.ADFConfigFactory findOrCreateADFConfig

  INFO: oracle.adf.share.config.ADFConfigFactory no META-INF/adf - config.xml not found

  Help me its urgent.

  Thank you

  Thanks for the reply to my post.

  I used the position and he help me solve the problem.

  As I'm working on R12.2.5 which is the latest version of oracle, so the solution was not entirely correct, but helped me dig the real solution.

  After that the implementation of Jdevloper below is the steps I followed

  1. change the profile FND option: validate IP address - no

  2 al ' Jdeveloper go to tools--> embedded OC4J preferences--> Global--> starting--> address local IP select by default.

  It helped me solve my problem.

  Thank you

• I have a charger for the iPhone I'll be able to go to the Apple Store and trade it for a new?

  I have a charger for the iPhone I'll be able to go to the Apple Store and trade it for a new?

  A1yvng wrote:

  I have a charger for the iPhone I'll be able to go to the Apple Store and rare it for another?

  I'm sorry, but that 'rare' mean in this sentence? If you are having problems with a charger and the phone, he came up with that is still under warranty, the unit would be under warranty. It will have to be reviewed by Apple, they make determinations. If you have purchased separately the charger, then it must be aged less than 1 year, and the review itself would apply. I hope that's what you're referring to.

• How can I find the number of pixels is in my photos of the ipad? I sell on ebay and they have new requirements for the photos. 500 pixels on the longest side. Is it possible to increase the pixels on already took pictures?

  How can I find the number of pixels is in my photos of the ipad? I sell on ebay and they have new requirements for the photos. 500 pixels on the longest side. Is it possible to increase the pixels on already took pictures?

  See if this application works for you > https://itunes.apple.com/us/app/image-size/id670766542?mt=8

• "Clips do not have enough media for the transition?

  I have two clips between which I want to insert a cross fade.  The first clip is 19 seconds long, the second is 16 seconds.

  When I try to put in the transition (I did two seconds of time), I get a message saying "Clips do not have enough media for the transition."  He will accept no transition more than 0.1 seconds.

  It makes no sense to me.  There are a lot of media for the transition time.  Can someone find out who's the problem and a possible solution?  Thank you.

  If it's important, the first clip is a mp4 video, and the second is a jpg photo.

• where did the sound when I installed 10.11.4?    System preferences do not allow to do me anything for the sound preferences.

  where did the sound when I installed 10.11.4?    System preferences do not allow to do me anything for the sound preferences.

  Are there no icon preferably for sound?

  

• You don't have enough privileges for the configuration of the connection properties. Contact your administrator

  When you attempt to connect to the VPN Aventail I get th e following in a "Connection error" message box: "you don't have enough privileges for the configuration of the connection properties. Contact your administrator. That this connection has worked before. I suspect a MS patch for breaking it. Any help would be appreciated.

  We have solved the problem yesterday, by simply reinstalling the Aventail software.

  I spoke to network administrators and nothing had changed, so it's quite strange.

  anyway thanks a lot for your help Brian.

  See you soon,.

  Tobias

• When will install Server 2008 Windows OS. Error Msg 0 x coming 80070070: "do not have enough space for the installation..." Even if I have 20 GB of space? Pls solve this problem immediately.

  When will install Server 2008 Windows OS. Error Msg 0 x coming 80070070: "do not have enough space for the installation..." Even if I have 20 GB of space? Pls solve this problem immediately.

  Hey Shiva,

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=windowsserver2008r2general

  Please do not hesitate to contact us if you have other questions related to Windows.

• How do I use the sony vaio VPCEC3S0E built in motion eye camera I have attached looking for the correct drivers but could not locate them

  How do I use the sony vaio VPCEC3S0E built in motion eye camera I have attached looking for the correct drivers but could not locate them

  Hello

  Troubleshoot camera connection
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  You probably need to recharge the device drivers and camera control software (usually included
  with the drivers and installed at the same time).

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Manually look at the sites of the manufacturer for drivers.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ----------------------------------------------------------------------------

  Check with the Sony Support, their online documentation and drivers (update or reinstall).
  and their forums.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  Sony - Forum
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• My brother bought window 7 and I use XP. What do we have to do for me to control his computer from my XP, so I can help or fix the errors.

  original title: remote assistance

  My brother bought window 7 and I use XP. What do we have to do for me to control his computer from my XP, so I can help or fix the errors.

  all you need is an application called "Remote Desktop Connection", it comes pre-installed in windows 7, if you have windows XP home, you can't get the remote desktop, but if you upgrade to XP Professional you can.

• Unable to connect to the internet but I don't have a driver for the Ethernet cables.

  Original title: connect to internet

  I reloaded Microsoft Windows Vista, now I can't connect to the internet. He says that I don't have a driver for the Ethernet cables. What can I do to fix this?

  Hello

  You download the drivers from the website of the manufacturer of the computer.

  Use the computer that you are on to get here > download save Driver/s to Office > copy to flash drive > transfer and install them on the problem.

  Driver downloads:

   

  Acer:

  http://us.Acer.com/AC/en/us/content/drivers

   

  ADVENT:

  http://www.adventcomputers.co.UK/product-downloads

   

  Alienware:

  http://support.Alienware.com/Support_Pages/Restricted_Pages/driver_downloads.aspx

   

  ASUS:

  http://www.ASUS.com/support

   

  Dell:

  http://www.Dell.com/support/drivers/us/en/19/ProductSelector

  eMachines:

  http://www.eMachines.com/EC/en/us/content/drivers

  Fujitsu:

  http://www.Fujitsu.com/us/support/

  Gateway:

  http://us.gateway.com/GW/en/us/content/drivers-downloads

  HP:

  http://WWW8.HP.com/us/en/drivers.html

  Lenovo:

  http://support.Lenovo.com/en_US/downloads/default.page#

  LG:

  http://www.LG.com/us/support/software-manuals

  Samsung:

  http://www.Samsung.com/us/support/downloads

  Sony Vaio:

  http://eSupport.Sony.com/Perl/select-System.pl?Director=driver

  Toshiba:

  http://support.Toshiba.com/drivers

  See you soon.