I have no sound after installation of service pack 2 - what to do now?

Similar Questions

• Error occurs after installation of Service Pack 3

  Windows XP starts after installation of Service Pack 3 only in safe mode.
  What about this error, the machine doesn't turn after restoration (to an old restore point) very well, but in this case that I do not have Service Pack 3.

  Can I install updates that are unique in the future, or do I have service pack 3 for windowsupdates in the future?

  Kind regards

  Pluto

  http://support.Microsoft.com/kb/950717

  Steps to take before you install Windows XP Service Pack 3

  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  Support: https://support.microsoft.com/oas/default.aspx?gprid=1173&st=1&wfxredirect=1

  TaurArian [MVP] 2005-2010 - Update Services

• After installation of Service Pack 1 for Vista 64 bits, Windows Security says Malware and firewalls are off.

  I recently reinstalled my copy of Vista 64 bit I hope to solve this problem that has been with me for a while.  Before I wiped and reloaded, Security Center Windows would alert me every day that my firewall protection and malware have been disabled.

  I use Kaspersky Internet Security, which is fully updated and works as it should.  I am able to activate Windows Firewall and bypass the firewall Kaspersky and that error to go away, however, I can't remove the error of malicious software.  I got all these errors directly after a restart after the installation of service pack 1.

  Under Windows Security Center it says, "Kaspersky Internet Security reports that it is turned off," under the heading for malware protection.  When I click on the button to activate under Windows Security, it goes through the steps who say do you trust this program, Yes, Yes, ok.  After choosing all the options of trust Kaspersky and activate this protection, he thinks about it a little, but always returned and said it's off.  It also has a green light saying that Windows Defender is actively protecting your computer.

  I think that my Internet Security Suite is successfully active in these areas and work I checked the menu, check that they work.  In my opinion, after installation of service pack 1 that something I have messed up in the statement that those programs are active or really uninstalled them.

  Even if I can get the only message that the Kaspersky firewall is disabled to disappear by enabling the Windows Firewall, which is not yet as I want.  I want the suite of internet security that I paid to be active and functional on the side of the Windows security features.

  I would appreciate any help with this problem by addressing why he continues to warn me that my protection malware and firewalls are disabled.  Thank you.

  Also install Windows Vista SP2 this problem could be solved, otherwise try to uninstall and reinstall Kaspersky and also, try to get the latest version of Kaspersky.

  If still the same issue please contact Kaspersky support.

• When I reboot after installation of service pack 2, the message comes out and says that updates are not configured correctly, returning from changes

  When I reboot after installation of service pack 2 on a computer laptop with Windows Vista Home Premium 32-bit Dell XPS M1530, the message comes out and says that updates are not configured correctly, returning from changes. Do not turn off your computer. I installed update readiness tool, but it does still every time. I tried to disable the antivirus software prior to installation.

  Hello
   
   
   
  1. how you try to install Service Pack 2?
  2. are you able to boot to the desktop?

   

   
  Method:
  Step 1: If you are able to start the computer in normal mode, then try a clean boot.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135
  Please note: after troubleshooting, start the computer in normal mode.

   
  Step 2: Try to install Service Pack 2 manually.
  http://www.Microsoft.com/en-us/download/default.aspx
   
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791
  
   
   
  If you are unable to start the computer, then you can follow this link to start the computer in safe mode.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
   
   

   

  If you are unable to install Service pack 2, you can consult this article.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

  Please note: method 2 refers about upgrade on site.  Perform a repair installation/place will not damage files and applications that are currently installed on your computer.   However, I suggest you to back up all important data on the computer before you perform the upgrade on the spot.

   

   

   

   
   
   
   

• Problems after installation of Service Pack 3 for Windows xp?

  After you install service pack 3, he started down, then when he tried to start it, nothing, that would make the windows logo then a blue screen. I tried to do a system restore, nothing, I tried to move the date of return in the bio, still nothing, I was payin 120.00 for someone to sit in front of my computer for 3 hours and IT couldn't work, but he ended up doing a full system restore, fortunately, I still have my photos and music but now his works more slowly. He guard tells me to download the package, tried again and poof, done the SAME thing again, this time I did the full restore again and now I'm not even download package. Y at - it something I can do or download for my computer as if it was. I did Defrag, I did the cleaning disc, cookies.etc... I clean up all this. I'm afraid to download updates due to what happened before... Help!

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that another repair facility (upgrade AKA on-site) will NOT fix it! [1]

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
       http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the deletion appropriate before installing any Windows Service Packs or IE updates and before installing your new anti-virus application (which will require to install WinXP SP3).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  ==============
  [1] one who made the "repair" work & you charged $120 to do a repair installation does not know his a * of his elbow. IMHO he should take care of all of the foregoing to you free of charge.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Blue screen on startup after installation of service pack 3

  Original title: big problems with Windows service pack 3

  My pc runs xp edition media with a processor intel dc. I had to reformat using recovery discs cleaning all ok using microsoft update until after that load successfully and the installation of Service pack 3. Start theres a brief flash of B.S.O.D. then it goes straight to load the page option of safe mode. Startup journal raises a whole series of errors. drivers of not start tearing my hair on it!

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu you want to see, he has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If it looks like there is some kind of name listed in the STOP message file, send this line also.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  If your ntbootlog is display messages «Is a not load driver...» ', this does not necessarily mean that a problem...

• After installation of service packs

  the last post really helped vary a lot...

  the installation of service pack 3 is fine, but when I restart the computer it gets stuck on "Please wait...". »

  If I turn off the computer I need to take

  CF. http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/9e580321-d5b8-48d7-a05f-997f3ece03e3

  I can assure you that the steps I listed will solve your problems. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Errors after installation of Service Pack 2 - 0xc0190002 xmllite.dll, crcdisk.sys and start-up config is corrupt error: 0 x 490

  original title: 0xc0190002 and config xmllite.dll and crcdisk.sys and boot is corrutp resutl error: 0 x 490 different codes and errors that I wrote down.

  I have a Dell Inspiron 1525.  It seems after I have updated to Vista with Service Pack 2 (I think) I think I destroyed my computer.  I can't use it.  I get a different error, '0xc0190002' and 'xmllite.dll' and "crcdisk.sys" and "Root Cause found: confi Boot is corrupted, repair action: repair of table of Partition follows: failed: error code 0 x 490" I used the disk I got from Dell for operating system, did a system repair, tried everything I could think of, but I'm not an expert.  Good by following the steps.  Have you tried a few things that have been listed here, thought he was fine, then I reboot and it turns a whole list of commands, and then stops at 1324/90509 or stops at crcdisk.sys...?  Can someone help me?

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• Windows does not often after installation of Service Pack 1

  Hello

  After installing windows 7 service Pack1 my computer responds more often and I always have to forcefully shut down the computer is there as a cmd line I can use at the command prompt to resolve this problem or is there as a solution to solve this kind of issue

  my computer is

  Acer Aspire Timeline X

  3820TG

  Windows 7

  Intel core i5

  Mobility of the ATI Radeon HD5650 1 GB graphics

  Thank you

  http://Windows.Microsoft.com/en-in/Windows7/troubleshoot-problems-installing-Service-Pack

  The most common causes of this problem are:

  • An inconsistency in the store of Windows services. Maintenance of Windows store is a feature that is required to install the service packs.

  • A program on your computer, such as an antivirus or antispyware, interferes with the installation of the service pack.

• Yamaha XG - AC Audio device does not not after installation of Service Pack 2 for XP

  Hello
  I'm new to this forum and my question is maybe stupid, but I'm not able to solve this problem.
  My Satellite 5200 801 makes no noise after that I installed the XP SP2. I tried to find a new driver for the Yamaha AC - XG Audio device (one that does not is 6.13.10.2152 (2002-07-19 day), but I wasn't able to find anything.)
  Please, could you help me?
  Thank you
  Bruno

  Hello

  I found another announcement in this forum on this subject!
  Your Satellite 5200 802 has a sound chip called Yamaha YMF753 and it is built in different notebooks! This chip problems with Service Pack 2 because MS consider that the pilot of his Yamaha AC - XG is unstable. When Service Pack 2 is installed, Windows disables the audio driver.

  Here are some links that might help you!

  Yamaha generic driver:

  http://drivers.Soft32.com/driver/download-Yamaha_AC_XG_Generic_Drivers_for_YMF753_743_752-24609.html

  Useful links:
  http://www.Yamaha.co.jp/English/lsiexp.html

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;328435

  Happy new year!

  TOK

• Not able to boot up normally after installation of Service Pack 3.

  Original title: I am trying to download Windowes XP SP3.

  I am trying to download Windowes XP SP3. After installation and reboot my computer only allows me to start in safe mode. It seems that I don't suystem for SP3. Also, in safe mode, it says I can solve problems by going to the Control Panel, but does not give any other direction on what to fix.

  Hi TimWaldal,

  What is the exact error message that you receive in safe mode?

  It seems that Service Pack 3 is not installed correctly.

  (a) that you try to run the system restore from safe mode that will repair return the computer to the point while it was working fine.

  How to restore Windows XP to a previous state

  (b) you can then manually download & install Service pack 3 from this link and check if the problem persists.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

  Note: System requirements to install Windows XP SP3

  Reference: Learn how to install Windows XP Service Pack 3 (SP3)

  Hope the helps of information.

  Please post back and we do know.

• Speaker not working after installation of Service Pack 1 of Vista.

  I have been under Vista Home Premium on my laptop for about 2 years, but have only now went on the internet with it.  I did the updates of windows, including Service Pack 1.  Now the speaker on the laptop does not work.  If I put the mouse on the speaker icon in the lower right corner of the office, he said that no audio output device is installed.

  Before I installed the SP1 download, I have my favorites of a link to the Microsoft page saying that this problem can occur.

  http://support.Microsoft.com/kb/936330

  This led to an application download of Mr. Fixit I read to mean he could diagnose and fix the problem.  All she could say is that there is no audio output device installed.

  So, is it a driver problem caused by Mr. Vista SP1 from Microsoft?  Or what it is - this?  (I was quite civilized with the language that I used here - I would like to meet face to face!)

  Seriously, I hope someone can help me here please.  I'm not one of the younger people really in place with computers, but I'm not totally computer illiterate either.

  Thanks in advance,

  K. Gazza

  Hi, I'm back!

  Problem seems to be solved - speaker is back!

  I just made a couple more windows updates that require a reboot.  To my surprise and my greatest pleasure, I heard the sound of Windows in the process.  It may not have been restarted because I updated Vista with Service Pack 1 yesterday and there is no sound when I started the laptop today.  Perhaps the latest updates is done.

  See you soon,.

  Gazza K

• Error after installation of Service Pack 1 for Windows 7

  I use Windows 7 Ultimate and have just upgraded to win 7 SP1, but after installation, this error "AntiVir Scanner from the command line for Windows has stopped working" message whenever I open an application. These applications don't crash, but the forthcoming disorder with them is really annoying, and I don't know how to solve this problem, because I do not use AntiVirus software at the present time. So please help me. Thanks in advance much.

  [IMG] http://i1226.photobucket.com/albums/ee410/bug_bunny145/Untitled_zps82267e02.jpg [IMG]

  I thank very you much. At that time I used too many software use clean boot as a method to check if a program has been the source of this error, so I decided to reinstall Windows 7. I really appreciate your support. ^^

• How can I open an image in PS Elements file after installation of service pack 2?

  Since I installed SP2 on my HP computer a week or two ago, tab 'Open' of Photoshop no longer appears at the top of my screen of photos, but rather a 'Preview' tab, and I was not able to open an image in Photoshop.  Instead, when I double click on an image, it opens in the photo gallery Windows.  Not long after that I installed service pack 2, I also changed my default browser from Internet Explorer to Mozilla Firefox, so I don't know if that has anything to do with it.  Thank you...

  Reinstall the PES or manualyl adjust your file associations.

  Mylenium

• PaperPort crashes after Installation of Service Pack 2 for Vista

  I have a Dell E531 system with 4 GB of ram and disk space.  I use Vista Home Premium.  I used Paperport 12 Pro on Vista SP1 without any problem.  Today I installed the Vista SP2 update, and now the application will not launch.  I get an error message that extension Paperport MV stopped working - by referring to the ppmv.exe.  I also have a separate error message with the same information on PdfPro5Hook.exe.  The site of Nuance recommedned changing DEP to only MS services and functions.  It did not work.  I uninstalled the application, rebooted, and then re-installed.  It installs fine without error - until trying to launch.  Then I used msconfig to restart without the startup items - so with no A / V and firewall.  I then ran the msi Paperport again and set up a repair.  The same problem.  I would like suggestions.

  Eric,

  Thanks for your detailed and informative response.  In fact, I completely uninstall all paperport by using the method you specified, as well as using solvents such as Revo Uninstaller and JV16 Powertools.  It did not help.  I finally got a response from shade that worked.  They sent me a zip file with the new versions of PPMV.exe and PDFPRO5Hook.exe.  After making sure that there were no process running paperport, I renamed the old files from .exe to .old and then copied the new verasions in the appropriate subdirectories.  After that, the application works again!  It took them several weks for answer me (too long), but the answer has solved my problem.  The gist of their response was:

  1 make sure that PaperPort is not active (make sure that the error message does not appear and the PaprPort.exe process fails in the Task Manager Windows).
  2. download the PPMV.zip file from the following link:
  http://supportcontent.nuance.com/PaperPort/12/ppmv.zip

   

  3. double-click on the PPMV.zip file and extract the PPMV.exe and PdfPro5Hook.exe files on your Windows desktop.
  4. go to the PaperPort 12 installation directory (default is C:\Program Files\Nuance\PaperPort).
  5. find the file named PPMV.exe and rename it to PPMV.old.
  6. find the file named PdfPro5Hook.exe and rename it to PdfPro5Hook.old.
  7 copy the new, PPMV.exe and PdfPro5Hook.exe, extracted files on the Windows desktop, and then paste them into the PaperPort 12 installation directory (default is C:\Program Files\Nuance\PaperPort).
  8. start PaperPort 12 and confirm that the app now starts correctly.

  I hope this helps others who may be affected by the same problem!