I have no sound after upgrading Windows XP to Windows 7.

Similar Questions

• I have no sound after upgrading to Windows 7. I have a Dell Inspiron 1420

  So I sound after upgrading to Windows 7. At one point, I get sound in my headphones. Now I have nothing. I have a Dell Inspiron 1420.

  [Moved from comments]

  Go to the website of Dell, put in your service tag, and download the driver for your audio.

  Good luck.

• Compaq CQ58: No sound after upgrade Windows 10

  No sound after updating Windows 10.

  Installed HP Support Assistant, which came with a video to try a headphone jack with Windows 7, so no joy there.

  Tried several times scanning but "HP has encountered an error when trying to analyze your product."

  Although this suggests that the failure of the scan, produce a result: Driver (1)

  Under 'pilot', it says "Windows 10 drivers may be available via Windows Update".

  But I already tried Windows Technical Support, who drew a blank and referred me to HP!

  Hello:

  I recommend that you try the audio driver IDT W8.1 support page for your laptop.

  This works in most cases.

  This package contains the driver that allows Audio IDT high definition (HD) in the notebook models that are running a supported operating system.

  File name: sp58406.exe

  If the W8.1 driver does not have the noise at work, try this...

  Go to Device Manager and click to expand the category of audio, video and game controllers device.

  1. click on the Audio CODEC of IDT high definition in Device Manager.

  2. click on the driver tab.

  3. click on Update Driver...

  4-> select Browse my computer for driver software.

  5. Select-> Let pick me from a list of drivers for devices on my computer.

  6. Select Audio device high definition (not IDT high def...)  "This is important). and click Next.

  Warning message is displayed, but the answer Yes.

  7 Windows has updated your driver software.

  8 restart the PC

  Key is step 6

• ENVY Ultrabook 4-1118tu: no sound after upgrade windows 10

  I've updated for windows 10 (probably my first mistake)

  First of all, I got the screen flashing - problem was to restore the computer difficulty settings - this is not the current issue, gives just some information.

  Since then, I've lost ALL SOUND.

  Not only I lost the sound, but I have no devices appearing in the play sounds option more.

  

  After reading several messages forum - it's what I tried

  HARD RESET - no change

  REMOVE IDT high definition codec, restart maching - no change

  Codec IDT high-definition REMOVING, RESTART HARD - no change

  

  Downloaded a file sp63932, it says that it was incompatible

  RUN HP SUPPORT ASSISTANCE, he said that there is no error and no update

  WINDOWS UPDATE - he said that there are no updates

  NO SOUND through speakers or LAPTOP computer (obviously, no audio playback device installed) - no change

  Tried the driver UPDATE, using devices - get the error message in the image

  

  I'd appreciate some help here.

  Have spent about 4 hours on this now and not getting any where - would just have the back of his.  ;(

  Thank you

  Erin

  Hi, Erin:

  Two other members of the forum lost sound on a computer desktop and laptop PC with the IDT audio controller after upgrading to W10.

  What has worked for them was to install the audio driver IDT W8.1 support their PC and driver page.

  It's the support page for your laptop.

  This package contains the driver that allows Audio IDT high definition (HD) in the notebook models that are running a supported operating system.

  File name: sp60188.exe

• No sound after upgrade windows 7

  I have no sound on my all-in-one averatec after doing the upgrade. After spending hours on troubleshooting it keeps saying that windows audio and generator endpoint audio windows must work and we're not! OK, I'm at the end of my rope... Help, please!

  Is their a file named "Setup.exe" or "Install.exe" in the 2nd disc?
  If so double click to start the driver install.

  JS
  http://www.PAGESTART.com
  Never be afraid to ask. This forum has some of the best people in the world to help.

• I have no sound after installing Windows update security.

  Help, please! I don't have a solid any after that auto update installed some update Windows security. Not even system sounds work. I tried to use headphones too. I checked Device Manager and my Creative Vibra 128 sound card is enabled and working. I updated the driver for the card and the sound seemed to be coming back, but after the reboot, no sound again. My speakers have been tested separately on a different system and they worked very well. But I still have no sound coming out of my PC.

  DirectSound test results: failure at step 3 (DirectSoundCreate): HRESULT = 0 x 80004005 (failed generic)

  My system info:

  Name of the operating system Microsoft Windows XP Professional

  Version 5.1.2600 Service Pack 3 Build 2600

  Manufacturer of operating system Microsoft Corporation

  Name of the system *.

  System manufacturer VIAP4M

  AWRDACPI system model

  System Type X 86-based PC

  Processor x 86 family 15 model 1 Stepping 3 GenuineIntel ~ 1699 Mhz

  Version/Date BIOS Phoenix Technologies, LTD 6.00 PG, 18/07/03

  SMBIOS Version 2.2

  Windows C:\WINDOWS directory

  System directory C:\WINDOWS\system32

  Boot Device \Device\HarddiskVolume1

  Locale *.

  Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).

  User name *.

  Time zone *.

  Total physical memory 1 024,00 MB

  Available physical memory 395,46 MB

  Total virtual memory 2.00 GB

  Available virtual memory 1.96 GB

  Page file space 2.33 GB

  Paging file C:\pagefile.sys

  It would be possible that the reason that your registry database seems to zero after the reboot is your antiviral is preventing to be changed when you update your drivers.  but this is only an idea unproven, but a possibility.

  in all cases, try to do a restore point for today / now.  This will take a snapshot of the current state of the system.

  Then, see if you can restore your computer state before the update that would have saved the drivers work and functional setup for your speaker system.

  my suggestion is to run a system via safe mode restore it if the anti viral theory is true, that it will not impede the process of restoring system in safe mode.

• I have no sound after installing Windows XP Home on Satellite Pro P100

  Hello

  I want to use another Windows XP Pro as the recovery CD. I can not install the sound card, when I run the setup.exe driver the latest driver of Toshiba sound, no devices appear on the screen, so I can only click on Cancel.

  I updated the bios to 2.40 (although I think it was already updated). I tried to install in the order the install.txt who recommend Toshiba (not sure what is Atheros Client Utility)
  I see in the Manager of windows devices, Legacy audio drivers (twice).
  Everything looks ok wait that I have no sound and may not have the speaker at the bottom right.
  The setting of the sound in the control panel, he wrote "no device" for her.

  Thank you

  Please help me and tell me that if I could find what other problems besides installing the following drivers, sound card is just the beginning!

  If you want to use your own installation of the OS, be sure that you install all the drivers, tools and utilities in the correct order. For this, you can download installations instructions document of the Toshiba download page.

• Have no sound after reformat Windows XP SP3 and updates

  I had to reformat my windows XP, SP3. Everything was fine, then to halfway through microsoft dates I lost sound.  It shows no drivers for sound, or I have a sound card, which is on the mother boaed. My sound and drivers is where?

  This a problem known but undocumented. Re-install the drivers from your sound card.

  See you soon,.

  Jerry

• Pavilion all-in-one 23 q011a: no sound after upgrade windows 10

  Operating system is window 10, do not know what bit. Sound works well on windows 8 that came with the computer after the upgrade to not win 10 no sound. Reflected on the line and tried to change the bitrate and the speaker on the range. Have reset the computer - still no sound. Thank you

  Have you installed the audio driver Windows 10?

  http://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71569.exe

  You can find all other 10 Windows drivers available for ytour all-in-One PC at the following ADDRESS.

  http://support.HP.com/au-en/drivers/selfservice/HP-Pavilion-23-all-in-one-desktop-PC-series/7902091/model/7842738#Z7_3054ICK0KGTE30AQO5O3KA30R1

• Satellite M115 - no sound after upgrading Windows XP to Windows 7

  Hi all

  Recently upgraded my Satellite of Windows XP to Windows 7 Enterprise 32-bit. After installation, the high definition Audio Device appears in Device Manager.

  Initially, I had an unknown device listed, but that has been resolved by the installation of the pilot site supervisor password utility from Toshiba. Since then, I have experimented with a number of audio drivers without result. Does anyone have advice?

  I downloaded the Conextant 4.8.0.0 pilots, who are not out during installation by saying "Driver Installation Failed: could not find the device for this driver." So now, I'm sitting here without any noise. It's sad. Please help and I'll give you points.

  -Red

  Hello

  Remove all audio drivers, you have already installed, reboot the laptop and download an audio driver for the Toshiba driver page

  For European models, take a look here:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  For Canadians or something like this:

  http://www.CSD.Toshiba.com/

  For the Australian and New Zealand:

  http://www.Toshiba.com.au/

• G6-1103sg: no sound after upgrade Windows 10

  Hello

  yesterday, I upgraded my g6-1103sg to windows 10 pavilion.

  After that the sound card is available, but there is no audio output.

  I tried to uninstall drivers and reinstall, but it did not help

  Can someone help me?

  Hello:

  The only suggestion I can offer would be to try this driver and see if it works on your model...

  This package contains the driver that allows to the Audio IDTHigh-definition (HD) in models of laptops that arerunning an operating system supported.

  File name: sp63555.exe

  If this does not work you can try this...

  1. Select IDT High Definition Audio CODEC on Device Manager.

  2. Select the driver tab.

  3. click on Update Driver... button.

  4-> select Browse my computer for driver software.

  5. Select-> Let pick me from a list of drivers for devices on my computer.

  6. Select Audio device high definition (not IDT high def...)  "This is important). and click Next.

  Warning message is displayed, but the answer Yes.

  7. Windows has updated your driver software.

  8 restart the PC

  Key is step 6.

• HP TouchSmart Sleekbook ENVY 4: no sound after upgrade Windows 10

  No speakers or headphones are connected.
  Windows Update 10 does not provide an update of speaker
  HP Support Tools does not win 10 drivers.

  Product name: HP ENVY TouchSmart Sleekbook 4
  Serial number: (deleted content)
  Product number: C2K73UA #ABA

  Message from system tray: no speakers or headphones are connected.  Playing Audio Troubleshooter found no solution.
  Windows Update 10 does not provide an update of the speaker.
  HP Support Tools does not win 10 drivers.

  Deleted the two drivers listed under sound Manager devices, but t
  The drivers listed are high Drfinition Audio Device and IDT High Definition Audio CODEC
  The CODEC driver has an icon in the shape of a yellow triangle next to him.
  Updated the CODEC driver results in error:
  Windows encountered a problem installing the software driver for your device
  Windows found driver software for your device but encountered an error trying to install it.
  IDT High Definition Audio CODEC

  Machine has 8.1 then updated to 10. Windows 10 has been altered somehow a few weeks after the update. It took Microsoft store and they did a routine repair of Windows 10, which re-installed 10. At this point sound was gone.

  Product name: HP ENVY TouchSmart Sleekbook 4
  Serial number: (deleted content)
  Product number: C2K73UA #ABA

  Recently, I had the same problem. Technical support had me to download the drivers for Windows 8.1 still and my sound returned. The explanation is that not all drivers have been created for Windows 10 again.

• I have no sound after installing Windows XP.

  Audio... No sound!

  I formatted the hard drive and intalled win xp pro, now it tells me I have no audio device, please help!

  Go to your computer manufacturer's support web site
  and search for the Windows XP drivers for your specific computer or motherboard model number.

  If there are Windows XP drivers, then download to a folder on your hard drive and burn it to a CD/DVD.
  Then, after installing XP install all device drivers, starting with the card mother/chipset drivers,
  LAN, Audio, USB, SATA, etc, and so on.

  Note: If there is no XP driver listed, then your computer is not compatible Windows XP.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the newer Windows XP drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• Satellite L750-1E5 - no sound after upgrade Windows 10

  Installed 10 yesterday and immediately lost my wireless connection. Who decided to roll back the wireless network card driver in Device Manager.

  Second problem - no sound from the speaker is internal, but Device Manager reports no problem with its controller...

  "My Toshiba" app reports L750 not supported for Windows 10?

  Can someone help to solve the noise problem please?

  Second problem - no sound from the speaker is internal, but Device Manager reports no problem with its controller...

  Even if the error is not visible in the Device Manager, it would be a good idea to uninstall the audio driver of the peripheral zone manager → sound video controller and game.

  After restarting again the system should automatically search for updates and new driver.

  Of course, the unit should always be connected to the internet.

• Pavilion slimline 400-034: no sound after upgrade windows 10

  Revently, I upgraded to Windows 10. Now my headphones do not work, there is no sound.  I went to windows web page downloaded all the drivers, uninstalled and reinstalled. I even had a tech guy to do a remote access and try to solve the problem.  He couldn't fix. He always says 'no audio devices installed.  I don't know what to try next... Help?  Thank you

  Hello:

  See if it works...

  Run IDT W8.1 audio driver. If she gets the audio, work great.

  This package provides the driver for the solutions Audio IDT high definition in the supported models that are running an operating system supported.

  File name: sp63932.exe

  Otherwise:

  See this thread.

  http://answers.Microsoft.com/en-us/Insider/Forum/insider_wintp-insider_devices/IDT-high-definition-audio-codec-not-working-on/570a5038-e48e-43F3-af75-95da61447c87?auth=1

  1. Select IDT High Definition Audio CODEC on Device Manager.

  2. Select the driver tab.

  3. click on Update Driver... button.

  4. Select-> Browse my computer for driver software.

  5. Select-> let me pick from a list of drivers for devices on my computer.

  6. Select Audio device high definition (not IDT high def...)  "This is important). and click Next.

  Warning message is displayed, but the answer Yes.

  7. Windows has updated your driver software.

  Key is step 6.