I have no sound on my computer (Windows XP). I installed audio driver with no result. What to do next?
No sound
Hi f. Mac,.
Follow the steps in the article.
How to troubleshoot sound problems in Windows XP
Tags: Windows
Similar Questions
-
I have a Microsoft Windows XP desktop.
My icon on my taskbar is missing for the sound and volume.
I have NO sound on my computer except when it starts.
I no. MY Computer Icon when I go to start.Go over each step in the following link, note that there are several tabs in the page:
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows -
not sure if this is where I ask, but I have no sound on my computer and my new speakers do not work
Hello
Yes, you asked your query in the category.
· When you say no sound, are there no system sound or no sound of any particular application?
· You receive an error message or error code when you try to use your new speakers?
· Do you remember all the recent changes on the computer before the show?
· What is the service pack installed?
· What is the number and the model of the computer?
Give the above information to us troubleshoot-performed the best to help. In the meantime you can see the article below no sound in Windows: http://windows.microsoft.com/en-US/windows/help/no-sound-in-windows :
-
I have no sound in my computer, but I can see my sound card but still no sound.plzzzzzz help?
See if the following tutorials will help:
No sound in Windowshttp://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
He
consists of 3 parts:
1 check the hardware
2. use a troubleshooting tool
3.
Updated driversDiagnose and
automatically fix audio problems
http://support.Microsoft.com/mats/NO_SOUND/en-usHe has a difficulty he asked along with other
Related topics.
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problemsAudio Troubleshooting
Problems
http://support.Microsoft.com/GP/troubleshoot_audio_windows -
have an error on my computer - Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a corrupt... local profile, what should I do please help.
Hi MelbaIsaiah,
I suggest you to follow the steps in the article and check if it helps.
Error message "Windows cannot load your profile because it may be corrupted" when you try to log on Windows XP
http://support.Microsoft.com/kb/318011
I hope this helps.
-
No sound on the computer Windows 7
Original title: sound problem
Hi, when I click on the sound icon open troubleshoot the program next to the sound icon is 'X', I tried to put audio driver in 'Manage', but nothing. What to do PLEASE HELP!
Hello Jovan,
Thanks for posting your question on the Microsoft community.
I would like to know some information about the problem so that we can help you better.
What is the brand and model of your computer?
Thank you for details on the issue.
This problem can occur either because of corrupt audio driver or incorrect audio settings.
I would suggest trying the following methods and check if it helps.
Method 1:
Troubleshooting of audio playback and check.
Reference:
Open the troubleshooting of Audio playback
http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-TroubleshooterIf this does not help, use method 2.
Method 2:
Please use the suggestions in this article and check the issue.
Reference:
No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1I hope this information helps.
Please let us know if you need more help.
Thank you
-
I have a sony vaio vgn - fs415m laptop and I have no sound on it. I'm missing an audio device I think. How can I solve this problem
Hello Keno09,
Thank you for your message. We will check your audio driver. Please follow these steps:1. click on 'Start' > right click on 'My computer' > select 'manage '."2 click on Device Manager.3. in the right pane, click the (+) sign next to "Sound, Video Game..."4. underneath, you will find the brand/model/name of your audio card/adapter?5. you will need to go to the site of the manufacturer and download/install the latest driver for your audio device.Please let us know if it did or did not help to solve your problem.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
New computer windows 8 has no hard drive...
New computer windows 8 is not disk drive, how should I go about installing my older versions of Lr and Ps Elements? I have the old boxes with Key Codes... and would rather not waste my Lr presets and collections.
Download and Installation Help-
-
Hi Mr President, last week I have a crash on my computer. Yesterday I installed PSE12... but I can't open the program, please I need help/support for this.
Wath can I do?
In the box: PN 65224809, product key 1057 -.
Please can you tell me wath is you solution?
Thanks a lot for helping me
Best regards, Roland Cuypers
Post edited by: Sandeep Singh removing serial number
Hi rolandc65772962,
Sorry for the inconvenience. Please provide us with the complete error message you get.
Kind regards
Sandeep
-
Stop windows update to install Nvidia driver version 52.16
Hello
Recently, I upgraded the PC of my father to WinXP SP3. It is an old DELL Dimension of 11 years. After installation there is a nagging question that won't stop.
Windows Update keeps trying to install the following:
MICROSOFT VIDEO NVIDIA GEFORCE 4 MX 420
NVIDIA driver version 52.16
This update is not necessary for the monitor to run.
So far, my difficulty was to start in safe mode and back the driver.
Windows Update repeatedly installed this driver. I have
detailed instructions on how to block this specific update to settle here.
Thank you
Dwayne Boyd
To hide an update in Windows XP, just go to the Windows Update site and uncheck the update and click on the + sign next to it. At the bottom of the explanation expanded the update the checkbox to hide this update become active and can be selected, thus masking the update.
Then, you need to remove the update from the temporary folder:
Stop the automatic updates service
Click Start, choose run.
In the run box, type services.msc.
Click OK.
Right-click the automatic updates service.
Click on stop.
Stopping the service will take a moment.Delete the content of the download folder
Click Start. Choose run.
In the run box, type %windir%\SoftwareDistribution
Click OK.
Open the download folder.
Delete all the contents of the download folder.
Close the window.Start the automatic updates service
Click Start. Choose run.
In the run box, type services.msc.
Click OK.
Right-click the automatic updates service.
Click Start.
Starting the service will take a moment.By removing the contents of the download folder - you have removed all downloaded
updates.Now, the next step would be to configure Windows Update in order to warn only rather than automatically download and install updates. In this way, you stay in control.
http://support.Microsoft.com/kb/306525
Click Start, click run, type sysdm.cpl, and then press ENTER.
Click the automatic updates tab, and then click to select an Notify me but don't automatically download or install
I hope this helps.
-
I am trying to send my photos from my phone to my computer, but not properly installed device driver appears. My question is what should I do to upload my pictures?
Hello
What brand / model of the phone?
You try to connect the phone to the computer wired or wireless?
Try the methods provided and see if it helps.
Method 1:
Check out the link and follow the steps.Connect to Bluetooth and other wireless or network devices
http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devicesMethod 2:
Check out the link and follow the steps to install the drivers for the device.Update drivers: recommended links
http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-linksYou can also check this link for more information.Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctlyMethod 3:You can also visit this link and follow the steps.What to do when a device is not installed correctly -
If I install CC on one computer, then after having worked on this computer for awhile I install United Nations. Is that what I can then reinstall CC on another computer under the same license? Thanks for your attention
You can activate the product on two computers, if are not the product on a computer before the uninstall, it is always better to disable the CC from this computer.
To turn off
launch no matter what CC products and click Help > log out.
-
I have no sound on the computer after the installation of Windows XP.
After the download of Windows XP in a torrent of the 'P2P' file on a disk. Then I installed it. But now, there is no audio device.
Anyone know what I can do?
Original title: no sound after installation of windows XP
Hi paowie1,
Thanks for posting your query in the Microsoft Community. You seem to have a problem with the no sound on Windows XP. We can get this fixed number by systematically. It can be frustrating for you. But, don't worry, we're here to help.
We start with a few questions-
(1) don't you perform a clean installation of Windows XP?
(2) what is the brand and model of the computer?
(3) have you done other changes on the computer?
I would like more information about the issue.
Method 1-
I would have you look at the article-
How to troubleshoot sound problems in Windows XP
http://support.Microsoft.com/kb/307918/en-GB#top
Method 2-
I would have you look at the article-
No sound in Windows
We know if you need help. We will be happy to help you.
Thank you.
-
I HAVE NO SOUND ON MY COMPUTER WITH WINDOWS XP PRO
My computer crashed and has upgraded windows xp to XP pro and now I have no sound
The following links may be worth a visit:
(307918) how to troubleshoot sound problems in Windows XP
http://support.Microsoft.com/kb/307918/en-GBDiagnose and automatically repair audio playback problems
http://support.Microsoft.com/mats/AudioPlayback/No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
(Win XP / Vista / 7) -
I have no sound on the computer after you have reinstalled Windows.
Hello
I just reinstalled Windows 7 on my PC and I was a little proud of myself, have internet, email, video works... but then no sound. :(
So the most common answer seems to be getting the correct driver.
I have a motherboard ASUS P7-P55-M, I went to the ASUS website and got the best audio driver for this mobo, which is: VIA_Audio_V6019500_XPVistaWin7.
I therefore installed that, and then one encouraging thing is that DURING the installation of this audio driver, my speakers made a sound that made me think that they are the least recognized, or this audio driver is at least to see them there?
But then after the reboot, I still have no sound.
So I tried to look at the specs for this mobo, and saw the audio chip itself is VIA VT1708S. So I followed the links and found a driver for it, but after I installed that now, it seems that it is just a version still newer same driver (the preceding being 9500, 10200 or this is what it looks like.)
in any case, this newer version and the one outside the site of ASUS, as well as older drivers, I think, just install a version or one that other: HD VDeck.
Common responses include at this time something about the Realtek drivers (can't see how tho so it shall not apply, or using those on drivers THROUGH), or Windows Troubleshooter, or something in the playback functions, or an old or Windows driver conflict with these new?), but I have tried these things (or I thought I did lol).
But I still have no sound on my speakers.
Very frustrating because it feels like I'm 98% done my re - install, and it looks like its just some simple setting somewhere in Windows or this HD VDeck that will get things working.
Any help would be greatly appreciated! :)
Original title: speakers work not after fresh windows 7 installed, please help!
Hello
Thank you very much for your answers. :)
I formatted completely, no folder Windows.old and also no printed dxdiag, I myself for the kicks, which I'll make sure to have next time lol.
Device Manager is fine, I went over that and basically each sound option of Windows or menu, that I could find, which made me think the problem somewhere else.
So I took the suggestion of Nirmal and used automatically diagnose it and fix the link he provided. Suggestions of the convenience store has really helped as much as he said everything has been updated, or was not a problem, but what I noticed, it was what a screen in the Microsoft Fixit program running:
Resolution of Windows Audio playback problems
Which of these devices you want to troubleshoot?
Select the device that you are having problems with. If the device is not listed, select device are not.
Speakers - VIA High Definition Audio (the connector for this device is located on the front of the computer).
Interface SPDIF (TX0) VIA High Definition Audio (the connector for this device is located on the open or pull-open sliding panel at the back of the computer).
Output HDMI AMD - AMD high definition Audio Device (Connector for this unit is located in the HDMI connector).
Unlisted device.
Now when I continued from here, I don't have all the answers useful, but it makes me start thinking about the plugs/connectors themselves, rather than the drivers or anything else.
So, I've discovered that my audio interface (HD VDeck) installed with the audio drivers of my motherboard, has no options is disable the jacks on the front panel, or the possibility of re - configure jacks how you want. If you want your speaker system to get out the same plug as it was before, you MUST be able to reconfigure your catch. Otherwise, making default value for your speakers, according to the drivers from the manufacturer of your, is actually not the green plug, I used, but among the other instead. This other outlets, or maybe even just the front headphone or microphone jack will work instead.
So to summarize:
If you did a clean install of Windows 7 (or a similar version), and that you have installed the drivers of your sound and re-configured your settings Windows Sound (speakers as value by default, etc.), then you did everything up to this point correctly. At this point, you MUST have an audio program like Realtek, which allows you to reconfigure or disable the catch. Otherwise, your speakers, by default, is no longer just the audio jack green we are accustomed to, but rather another "back". You MUST use the other rear socket (most likely the speaker FRONT plug), or one of your jacks façade, in plugging your speakers instead.
This may sound funny, but this workaround works, unless you get an audio program to reassign the normal green audio jack.
I looked at hundreds of messages on the last few days trying to get this resolved. I wish I could go back and share this info with all these people now lol.
Thanks for the info, and please share with all those who have problems with Windows reinstall and sound.
Kind regards
Brad
Maybe you are looking for
-
I would like to install Windows XP on my laptop (now I have Vista). * Eldorado * told me that if I want to install XP, I need to set the SATA mode of * AHCI * to * compatible *. He said it can be done in the BIOS. So, I found in the BIOS, changed and
-
Problems with playback of games on my Satellite L300-13 b
I hope I've put this in the right forum. I tried different games and some of them seem to work, even if my computer exceeds the minimum system requirements. For example, I tried to install and play call of duty 2.After reducing to the lowest settings
-
I get a recording of event ID 370, about once every four days, what about the EPSON Stylus COLOR 460 printer ESC/P 2. I recognize the device as an old device, which is no longer necessary, that I thought was completely uninstalled years ago and I am
-
Impossible videos after connecting to the TV.
Original title: video memory Gone Bad? Did a glance see my video memory by using the method of office, and he said: Total available graphics memory - 256 dedicated - memory 0; Video system - 64; Memory shared system - 192. It's not jive with the num
-
Metric derived in FMS log errors
Hey guys,. A month or two there are yall really helped me when I tried to create a metric derived for number of CPU. That's what we were using. scope is an instance of HostCPUscpuCounts = #! CPUCounts: UC = $scope # .topologyObjectscpuCount = cpuCou